Step-by-Step Volume Regulation in VLC: Ensuring Consistent Sound Quality

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

“Echo-Free Editing: Five Approaches for Audio Cleansing in Video Content”

How to Remove Audio from Video Online?

Shanoon Cox

Mar 27, 2024• Proven solutions

The raw footage produced by all digital cameras contains sound, but more often than not the quality of the audio captured by a camera microphone is underwhelming. Editing a video demands time and access to a powerful video editing app, such as Final Cut Pro or Vegas Pro. In case you don’t have the necessary skills to edit a video using Mac or PC based video editing apps or you simply don’t have enough time to go through the audio editing process, you’ve come to the right place, because in this article we are going to take you through some of the best online solutions that let you remove audio from a video effortlessly.

Recommended Video Editor for Removing & Muting Audio from Video on Windows & Mac: Wondershare Filmora

6 Ways to Remove Audio from Video Online in 2022

Each of the online tools presented in this article has a video size limit, which is why you need to make sure that the video file doesn’t exceed the size limit set by the platform. Furthermore, how long the upload is going to last depends on the size of the file, so it is advisable to choose a video that is small in size in order to avoid wasting a lot of time on waiting for the file to upload. Here’s how you can remove audio from videos online.

2. AudioRemover

This platform offers a lot of video and audio editing tools for free, and it enables you to stabilize videos, change their size or to extract audio from video. The AudioRemover tool is quite simple to use, as you just have to click on the Browse button to select the video you’d like to upload and then click on the Upload Video button to start removing the audio from video. The entire process is automatic, so once the upload is over you can just click on the Download File link to save the new file to your computer. You can’t upload files larger than 500MB to AudioRemover which can potentially reduce the number of options you have at your disposal. The platform replaces the entire audio of a video clip and it doesn’t allow you to remove only a part of the video’s original sound.

3. Audio-Extractor

If you would like to separate the audio from a video, the Audio-Extractor tool is one of the best options available on the Internet. You just have to upload a video file to the platform from your computer or from the Google Drive, select MP3, FLAC or OGG output audio format and click on the Extract Audio button. You can then save the audio file on Google Drive, Dropbox or download it to your computer. The 123apps platform also offers Audio Cutter, Audio Converter and Voice Recorder tools you can use to edit an audio file online or add narration to your videos. However, Audio-Extractor isn’t the best option for removing audio from videos, since it only allows you to save audio files, which means that you can’t create a video that doesn’t contain sound with this tool.

4. Kapwing

Kapwing is an online video editing platform that lets you add text or music to videos, change the playback speed of a video or create memes and stop-motion animations. The Mute Video tool reduces the video’s audio volume to zero automatically, which for all practical purposes is the same as removing an audio file from a video. After you upload a video to the platform, you’ll be able to preview it without sound, and if you like the result you can click on the Create button. Generating a muted file can take a while, depending on how long is the video, but once the process is completed, you can click on the Download button to save the video to your computer or the Edit button if you want to go through all the steps of muting a video again. All tools on the Kapwing platform are free, but the videos you mute will be watermarked unless you pay a small fee to remove the watermark.

5. Remove Sound From Videos Online

The wide range of supported audio and video formats make this platform a reliable option for anyone who wants to extract an audio file from a video or remove the original audio from the video completely. Click on the Choose File button and then select either Remove Sound or Extract Sound option. If you want to Extract Sound the platform lets you choose from MP3, iPhone ringtone or wav output audio file formats. Click on the Upload&Convert button and wait for the video file to be processed. When the file is converted you can save the new video or audio file to a destination on your hard drive. However, the platform requests your mobile phone number before you can download a file and it displays ads after you click on the Download button, which can be quite frustrating if you want to remove audio from a video clip quickly.

6. Using YouTube to Remove Audio From Videos

Although YouTube is not famous for its video or audio editing tools, you can still remove audio from videos in the platform’s Creator Studio. Select the video you’d like to mute and then go the Creator Studio’s Video tab. Once the options Video tab has to offer are displayed on the screen you should click on the Audio tab, that is located at the top of the screen next to Enhancements and End Screen and Annotations tabs. When the new tab opens you’ll notice that there is no option to remove audio from a video, but you can change the Featured Tracks option to Ambient and then select one of the available tracks in the menu below. The Favor Original Audio slider that is located below the preview window lets you control how much the new track is going to impact the video’s original sound. Drag the slider all the way to the right in order to avoid bringing back the original audio and then click on the Position Audio option to gain access to the audio waveform. Drag the slider located on the right side of the waveform all the way to the left to trim the duration of the new audio to approximately one second and the video will no longer have sound. This audio editing technique won’t work if you trim the new audio to zero, which is why it is important to carefully set the duration of the new audio track you added to the video. Click on the Save as New Video option to confirm the changes you’ve made and that’s it you successfully used YouTube to remove audio from a video.

Conclusion

Extracting or muting a video online is easy since you just have to upload a video file and the online tool you’ve chosen for this task will do the rest for you. The only downside is that you have to mute the entire video since none of the platforms featured in this article allows you to choose the section of a video you’d like to mute. Which method of removing audio from videos do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox