“Revamping Your Soundtrack? Check Out the Best Audio Normalizers for Windows Users “

An audio normalizer is a tool that helps to change the overall volume of audio by a set amount to reach a predetermined level. In simple words, it can be defined as turning up the volume of an audio file without losing the audio quality.

Sound normalization is done for mainly two reasons. One is to increase the volume of a quiet audio file without making changes in its dynamic range for easy and better hearing. The other reason is to achieve matching volumes for different audio files.

While the sound of the audio gets increased during audio normalization, the noise will also get increased. So make sure that normalization is done properly within the right limit.

Top 10 Audio Normalizers for Windows

Audio normalization was commonly done in the early days when digital audio was enjoyed. The performance of many audio components was limited in signal-to-noise ratio and dynamic range, and sound normalization helped.

Normalization is still a useful feature that helps to equalize volume in different files. Let us look at some of the best audio normalizers available in Windows.

1. Wondershare Filmora

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Wondershare Filmora is a widely used video editing application famous for its extensive video and audio editing features. The Auto Normalization in Filmora is an AI integrated feature that analyses the volume of all the clips you have selected. It then automatically adjusts the volumes to 23.0LUFS, the standard loudness level of European audio programs.

To enable Auto Normalization on Filmora:

Go to the timeline and double click on the audio clip you wish to normalize, and from the window that appears, go to Audio, select Audio Normalization, and tap OK.

The audio will be analyzed and normalized automatically within some time.

2. Audacity

Audacity is a free and open-sourced audio software used on all operating systems. Its simple interface and compatibility across different platforms are the main reasons for its popularity.

The sound normalization feature of audacity can be used to set the peak amplitude of any track. It also allows to equalize the balance of the right and left channels of any stereo tracks.

Open audacity, click on Effect from the top toolbar, and then select Normalize. Three different options will be given for you to apply.

You can remove the DC offset, independently normalize stereo channels or normalize the maximum amplitude to your desired decibel.

3. Adobe Premiere Pro

As you all might know Adobe premium pro is a wonderful video editing application used by beginners and professionals alike. To normalize audio on adobe premium pro, go to the timeline, right-click on the audio file, and tap on Audio Gain…

A small window will appear, from which you can select the Normalize Max Peak to: option. The dB can be manually adjusted to your desired limit.

Click OK after making the necessary adjustments, and the changes will take place instantly.

4. MP3Gain

MP3Gain is an audio normalizing tool that analyses and adjusts the volumes of mp3 files so that they all have the same volume. They also ensure the original quality after the sound normalization process.

After the installation of MP3 gain on your device open it. Select Options, then Filename Display, and then Show File Only. Then tap on Add File(s) and add the files you need to normalize to MP3Gain.

This application can be used to play several songs at the same volume and the need to adjust the volume at the beginning of each song can be avoided.

5. VLC Video Player

Even though you might be familiar with VLC as a video player, it has many features that help to make changes in the audio and video of a file.

The player has a built-in sound normalization feature that can be enabled when needed. Open the player and tap on Tools from the top toolbar and then on the Preferences option. Choose to show All settings from the bottom right and select Filters under the Audio from the left panel. Tick mark the Volume normalizer option and hit the Save button.

The volume level can also be adjusted from the Volume normalizer panel under the Filters option.

6. Final Cut Pro

Final cut pro x is a non-linear and nondestructive video application commonly used on Apple devices. This application offers improved rendering, playback, and transcoding.

To normalize audio on final cut pro x, open the application and tap on the Modify option, then on Audio, and finally on Apply Normalization Gain.

To normalize more than one audio clip make sure that the audio level of each clip is set to 0 dB. This can be done by tapping on Edit and then on Remove Attributes. So for better results, make sure that the audio level of each clip is set to 0dB before normalization.

7. Handbrake

Handbrake is an open-source video transcoder that can convert any video format to any desired codecs. It also has some video and audio editing features. The sound normalization feature in Handbrake allows the user to adjust the dynamic range of some of the audio formats.

To increase the audio gain on Handbrake, select Source on the app and make sure the video file and destination are correct. Then click on the Audio option and adjust the Gain.

8. Reaper

Reaper is an all-in-one audio production application that offers extensive audio editing features, including MIDI recording, editing, mixing, processing, etc. To bring the volume level to a higher level using an audio normalizer in Reaper, open the application and import the audio files.

Reaper offers keyboard shortcuts for applying different features and normalizing audio on PC. The shortcut is Control + Shift + N.

This app also allows manual normalization using a knob which can be done according to the user preference.

9. AIMP

AIMP is a freeware audio player used by many android and windows users to enjoy music. This player offers an audio normalization feature that can be applied to all the files by default.

To do so, go to DSP manager in AIMP and click on the Volume normalization tab. Mark the Normalize volume option and make changes to the settings.

You can adjust the target volume level, the upper threshold of the preamp, and the lower threshold of preamp in the settings. The app also allows making changes to the gain values.

10. Movavi

Movavi is a video editor with a very intuitive interface and a big collection of effects. Normalizing the audio using Movavi is very simple, and to do so, open the application and import the file first to the timeline.

Double click on the file on the timeline and click on Clip Properties. From the General tab, tick mark the Normalize box, and the whole audio track will be normalized.

What is the best audio normalizer for you?

An audio normalizer can be used for a variety of purposes. Some people use it to play songs without having to adjust the volume for each song manually, others use it for enhancing the volume of songs that has a very low volume, and some others use it for video editing purposes.

A list of applications with sound normalizers has been listed above, and you can choose any one of them depending on your purpose. Some of these apps, like Wondershare Filmora, Final Cut Pro X offers extensive audio editing features and audio normalization, which can be very helpful in video editing. If you wish to increase the volume of the files while playing, you can go with VLC, MP3Gain, etc. Hope our suggestion helps to provide you with a better audio experience.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Wondershare Filmora is a widely used video editing application famous for its extensive video and audio editing features. The Auto Normalization in Filmora is an AI integrated feature that analyses the volume of all the clips you have selected. It then automatically adjusts the volumes to 23.0LUFS, the standard loudness level of European audio programs.

To enable Auto Normalization on Filmora:

Go to the timeline and double click on the audio clip you wish to normalize, and from the window that appears, go to Audio, select Audio Normalization, and tap OK.

The audio will be analyzed and normalized automatically within some time.

2. Audacity

Audacity is a free and open-sourced audio software used on all operating systems. Its simple interface and compatibility across different platforms are the main reasons for its popularity.

The sound normalization feature of audacity can be used to set the peak amplitude of any track. It also allows to equalize the balance of the right and left channels of any stereo tracks.

Open audacity, click on Effect from the top toolbar, and then select Normalize. Three different options will be given for you to apply.

You can remove the DC offset, independently normalize stereo channels or normalize the maximum amplitude to your desired decibel.

3. Adobe Premiere Pro

As you all might know Adobe premium pro is a wonderful video editing application used by beginners and professionals alike. To normalize audio on adobe premium pro, go to the timeline, right-click on the audio file, and tap on Audio Gain…

A small window will appear, from which you can select the Normalize Max Peak to: option. The dB can be manually adjusted to your desired limit.

Click OK after making the necessary adjustments, and the changes will take place instantly.

4. MP3Gain

MP3Gain is an audio normalizing tool that analyses and adjusts the volumes of mp3 files so that they all have the same volume. They also ensure the original quality after the sound normalization process.

After the installation of MP3 gain on your device open it. Select Options, then Filename Display, and then Show File Only. Then tap on Add File(s) and add the files you need to normalize to MP3Gain.

This application can be used to play several songs at the same volume and the need to adjust the volume at the beginning of each song can be avoided.

5. VLC Video Player

Even though you might be familiar with VLC as a video player, it has many features that help to make changes in the audio and video of a file.

The player has a built-in sound normalization feature that can be enabled when needed. Open the player and tap on Tools from the top toolbar and then on the Preferences option. Choose to show All settings from the bottom right and select Filters under the Audio from the left panel. Tick mark the Volume normalizer option and hit the Save button.

The volume level can also be adjusted from the Volume normalizer panel under the Filters option.

6. Final Cut Pro

Final cut pro x is a non-linear and nondestructive video application commonly used on Apple devices. This application offers improved rendering, playback, and transcoding.

To normalize audio on final cut pro x, open the application and tap on the Modify option, then on Audio, and finally on Apply Normalization Gain.

To normalize more than one audio clip make sure that the audio level of each clip is set to 0 dB. This can be done by tapping on Edit and then on Remove Attributes. So for better results, make sure that the audio level of each clip is set to 0dB before normalization.

7. Handbrake

Handbrake is an open-source video transcoder that can convert any video format to any desired codecs. It also has some video and audio editing features. The sound normalization feature in Handbrake allows the user to adjust the dynamic range of some of the audio formats.

To increase the audio gain on Handbrake, select Source on the app and make sure the video file and destination are correct. Then click on the Audio option and adjust the Gain.

8. Reaper

Reaper is an all-in-one audio production application that offers extensive audio editing features, including MIDI recording, editing, mixing, processing, etc. To bring the volume level to a higher level using an audio normalizer in Reaper, open the application and import the audio files.

Reaper offers keyboard shortcuts for applying different features and normalizing audio on PC. The shortcut is Control + Shift + N.

This app also allows manual normalization using a knob which can be done according to the user preference.

9. AIMP

AIMP is a freeware audio player used by many android and windows users to enjoy music. This player offers an audio normalization feature that can be applied to all the files by default.

To do so, go to DSP manager in AIMP and click on the Volume normalization tab. Mark the Normalize volume option and make changes to the settings.

You can adjust the target volume level, the upper threshold of the preamp, and the lower threshold of preamp in the settings. The app also allows making changes to the gain values.

10. Movavi

Movavi is a video editor with a very intuitive interface and a big collection of effects. Normalizing the audio using Movavi is very simple, and to do so, open the application and import the file first to the timeline.

Double click on the file on the timeline and click on Clip Properties. From the General tab, tick mark the Normalize box, and the whole audio track will be normalized.

What is the best audio normalizer for you?

An audio normalizer can be used for a variety of purposes. Some people use it to play songs without having to adjust the volume for each song manually, others use it for enhancing the volume of songs that has a very low volume, and some others use it for video editing purposes.

A list of applications with sound normalizers has been listed above, and you can choose any one of them depending on your purpose. Some of these apps, like Wondershare Filmora, Final Cut Pro X offers extensive audio editing features and audio normalization, which can be very helpful in video editing. If you wish to increase the volume of the files while playing, you can go with VLC, MP3Gain, etc. Hope our suggestion helps to provide you with a better audio experience.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Wondershare Filmora is a widely used video editing application famous for its extensive video and audio editing features. The Auto Normalization in Filmora is an AI integrated feature that analyses the volume of all the clips you have selected. It then automatically adjusts the volumes to 23.0LUFS, the standard loudness level of European audio programs.

To enable Auto Normalization on Filmora:

Go to the timeline and double click on the audio clip you wish to normalize, and from the window that appears, go to Audio, select Audio Normalization, and tap OK.

The audio will be analyzed and normalized automatically within some time.

2. Audacity

Audacity is a free and open-sourced audio software used on all operating systems. Its simple interface and compatibility across different platforms are the main reasons for its popularity.

The sound normalization feature of audacity can be used to set the peak amplitude of any track. It also allows to equalize the balance of the right and left channels of any stereo tracks.

Open audacity, click on Effect from the top toolbar, and then select Normalize. Three different options will be given for you to apply.

You can remove the DC offset, independently normalize stereo channels or normalize the maximum amplitude to your desired decibel.

3. Adobe Premiere Pro

As you all might know Adobe premium pro is a wonderful video editing application used by beginners and professionals alike. To normalize audio on adobe premium pro, go to the timeline, right-click on the audio file, and tap on Audio Gain…

A small window will appear, from which you can select the Normalize Max Peak to: option. The dB can be manually adjusted to your desired limit.

Click OK after making the necessary adjustments, and the changes will take place instantly.

4. MP3Gain

MP3Gain is an audio normalizing tool that analyses and adjusts the volumes of mp3 files so that they all have the same volume. They also ensure the original quality after the sound normalization process.

After the installation of MP3 gain on your device open it. Select Options, then Filename Display, and then Show File Only. Then tap on Add File(s) and add the files you need to normalize to MP3Gain.

This application can be used to play several songs at the same volume and the need to adjust the volume at the beginning of each song can be avoided.

5. VLC Video Player

Even though you might be familiar with VLC as a video player, it has many features that help to make changes in the audio and video of a file.

The player has a built-in sound normalization feature that can be enabled when needed. Open the player and tap on Tools from the top toolbar and then on the Preferences option. Choose to show All settings from the bottom right and select Filters under the Audio from the left panel. Tick mark the Volume normalizer option and hit the Save button.

The volume level can also be adjusted from the Volume normalizer panel under the Filters option.

6. Final Cut Pro

Final cut pro x is a non-linear and nondestructive video application commonly used on Apple devices. This application offers improved rendering, playback, and transcoding.

To normalize audio on final cut pro x, open the application and tap on the Modify option, then on Audio, and finally on Apply Normalization Gain.

To normalize more than one audio clip make sure that the audio level of each clip is set to 0 dB. This can be done by tapping on Edit and then on Remove Attributes. So for better results, make sure that the audio level of each clip is set to 0dB before normalization.

7. Handbrake

Handbrake is an open-source video transcoder that can convert any video format to any desired codecs. It also has some video and audio editing features. The sound normalization feature in Handbrake allows the user to adjust the dynamic range of some of the audio formats.

To increase the audio gain on Handbrake, select Source on the app and make sure the video file and destination are correct. Then click on the Audio option and adjust the Gain.

8. Reaper

Reaper is an all-in-one audio production application that offers extensive audio editing features, including MIDI recording, editing, mixing, processing, etc. To bring the volume level to a higher level using an audio normalizer in Reaper, open the application and import the audio files.

Reaper offers keyboard shortcuts for applying different features and normalizing audio on PC. The shortcut is Control + Shift + N.

This app also allows manual normalization using a knob which can be done according to the user preference.

9. AIMP

AIMP is a freeware audio player used by many android and windows users to enjoy music. This player offers an audio normalization feature that can be applied to all the files by default.

To do so, go to DSP manager in AIMP and click on the Volume normalization tab. Mark the Normalize volume option and make changes to the settings.

You can adjust the target volume level, the upper threshold of the preamp, and the lower threshold of preamp in the settings. The app also allows making changes to the gain values.

10. Movavi

Movavi is a video editor with a very intuitive interface and a big collection of effects. Normalizing the audio using Movavi is very simple, and to do so, open the application and import the file first to the timeline.

Double click on the file on the timeline and click on Clip Properties. From the General tab, tick mark the Normalize box, and the whole audio track will be normalized.

What is the best audio normalizer for you?

An audio normalizer can be used for a variety of purposes. Some people use it to play songs without having to adjust the volume for each song manually, others use it for enhancing the volume of songs that has a very low volume, and some others use it for video editing purposes.

A list of applications with sound normalizers has been listed above, and you can choose any one of them depending on your purpose. Some of these apps, like Wondershare Filmora, Final Cut Pro X offers extensive audio editing features and audio normalization, which can be very helpful in video editing. If you wish to increase the volume of the files while playing, you can go with VLC, MP3Gain, etc. Hope our suggestion helps to provide you with a better audio experience.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Wondershare Filmora is a widely used video editing application famous for its extensive video and audio editing features. The Auto Normalization in Filmora is an AI integrated feature that analyses the volume of all the clips you have selected. It then automatically adjusts the volumes to 23.0LUFS, the standard loudness level of European audio programs.

To enable Auto Normalization on Filmora:

Go to the timeline and double click on the audio clip you wish to normalize, and from the window that appears, go to Audio, select Audio Normalization, and tap OK.

The audio will be analyzed and normalized automatically within some time.

2. Audacity

Audacity is a free and open-sourced audio software used on all operating systems. Its simple interface and compatibility across different platforms are the main reasons for its popularity.

The sound normalization feature of audacity can be used to set the peak amplitude of any track. It also allows to equalize the balance of the right and left channels of any stereo tracks.

Open audacity, click on Effect from the top toolbar, and then select Normalize. Three different options will be given for you to apply.

You can remove the DC offset, independently normalize stereo channels or normalize the maximum amplitude to your desired decibel.

3. Adobe Premiere Pro

As you all might know Adobe premium pro is a wonderful video editing application used by beginners and professionals alike. To normalize audio on adobe premium pro, go to the timeline, right-click on the audio file, and tap on Audio Gain…

A small window will appear, from which you can select the Normalize Max Peak to: option. The dB can be manually adjusted to your desired limit.

Click OK after making the necessary adjustments, and the changes will take place instantly.

4. MP3Gain

MP3Gain is an audio normalizing tool that analyses and adjusts the volumes of mp3 files so that they all have the same volume. They also ensure the original quality after the sound normalization process.

After the installation of MP3 gain on your device open it. Select Options, then Filename Display, and then Show File Only. Then tap on Add File(s) and add the files you need to normalize to MP3Gain.

This application can be used to play several songs at the same volume and the need to adjust the volume at the beginning of each song can be avoided.

5. VLC Video Player

Even though you might be familiar with VLC as a video player, it has many features that help to make changes in the audio and video of a file.

The player has a built-in sound normalization feature that can be enabled when needed. Open the player and tap on Tools from the top toolbar and then on the Preferences option. Choose to show All settings from the bottom right and select Filters under the Audio from the left panel. Tick mark the Volume normalizer option and hit the Save button.

The volume level can also be adjusted from the Volume normalizer panel under the Filters option.

6. Final Cut Pro

Final cut pro x is a non-linear and nondestructive video application commonly used on Apple devices. This application offers improved rendering, playback, and transcoding.

To normalize audio on final cut pro x, open the application and tap on the Modify option, then on Audio, and finally on Apply Normalization Gain.

To normalize more than one audio clip make sure that the audio level of each clip is set to 0 dB. This can be done by tapping on Edit and then on Remove Attributes. So for better results, make sure that the audio level of each clip is set to 0dB before normalization.

7. Handbrake

Handbrake is an open-source video transcoder that can convert any video format to any desired codecs. It also has some video and audio editing features. The sound normalization feature in Handbrake allows the user to adjust the dynamic range of some of the audio formats.

To increase the audio gain on Handbrake, select Source on the app and make sure the video file and destination are correct. Then click on the Audio option and adjust the Gain.

8. Reaper

Reaper is an all-in-one audio production application that offers extensive audio editing features, including MIDI recording, editing, mixing, processing, etc. To bring the volume level to a higher level using an audio normalizer in Reaper, open the application and import the audio files.

Reaper offers keyboard shortcuts for applying different features and normalizing audio on PC. The shortcut is Control + Shift + N.

This app also allows manual normalization using a knob which can be done according to the user preference.

9. AIMP

AIMP is a freeware audio player used by many android and windows users to enjoy music. This player offers an audio normalization feature that can be applied to all the files by default.

To do so, go to DSP manager in AIMP and click on the Volume normalization tab. Mark the Normalize volume option and make changes to the settings.

You can adjust the target volume level, the upper threshold of the preamp, and the lower threshold of preamp in the settings. The app also allows making changes to the gain values.

10. Movavi

Movavi is a video editor with a very intuitive interface and a big collection of effects. Normalizing the audio using Movavi is very simple, and to do so, open the application and import the file first to the timeline.

Double click on the file on the timeline and click on Clip Properties. From the General tab, tick mark the Normalize box, and the whole audio track will be normalized.

What is the best audio normalizer for you?

An audio normalizer can be used for a variety of purposes. Some people use it to play songs without having to adjust the volume for each song manually, others use it for enhancing the volume of songs that has a very low volume, and some others use it for video editing purposes.

A list of applications with sound normalizers has been listed above, and you can choose any one of them depending on your purpose. Some of these apps, like Wondershare Filmora, Final Cut Pro X offers extensive audio editing features and audio normalization, which can be very helpful in video editing. If you wish to increase the volume of the files while playing, you can go with VLC, MP3Gain, etc. Hope our suggestion helps to provide you with a better audio experience.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Audience-Friendly Approach to PC Audio Recording Using Audacity Gratis

Natural audio recording software, such as Voice Memos for Macs or Sound Recorder for Windows PCs, is included with every machine. These applications enable users to record audio using either the desktop’s internal or an external microphone, and they generally have basic audio editing features.

However, when you’re looking for a higher-quality recording program, Audacity is the way to go. Audacity is a free audio editor with a lot of cutting-edge features. More significantly, recording using Audacity is as simple as clicking a button.

In this Audacity Record Computer Audio guide, we will show you all the methods of recording internal audio on your computer and Mac.

In this article

01 Record Audio On Audacity with a Microphone

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

Accelerated Audio Solutions: Navigating Imports in Adobe Premiere Pro (2023 Edition)

How to Quickly Fix Audio Importing Issues in Adobe Premiere Pro

Benjamin Arango

Mar 27, 2024• Proven solutions

All video files that are captured with GoPro and other types of digital cameras contain sound, but in certain situations, you may get the ‘The file has no audio or video streams’ after you try to import mp4, mov and MTS files into Adobe Premiere Pro.

This can be quite frustrating, even though, in most cases, you won’t use the sound that was recorded by the camera in the final cut of your video. This problem can be solved quickly, so in this article, we are going to show you a few different methods of fixing audio importing issues in Adobe Premiere Pro.

Read More to Get : Best Audio Mixer Software to Trim Your Sound Easily >>

Four Ways to Solve Audio Importing Issues in Adobe Premiere Pro

There are numerous factors that can cause Adobe Premiere Pro to stop functioning properly , and if the app won’t let you import video files into a project because it has no audio or video streams, there are few things you can do to fix this without having to reinstall the operating system on your computer or the version of Adobe Premiere Pro you’re currently using.

1. Clearing the Media File Cache

If you tried to import a video file into a project and the app notified you that it cannot import the file because there is no audio stream, you should head over to the Edit menu and select the Preferences Tab. Once the Preferences window pops up on the screen, click on the Media tab and then proceed to delete all files that are stored in the Media Cache Database and Media Cache Files folders. Restart the application after you’ve cleaned both of these folders and try to import the video clips into the project once more. If the issue persists, there are a few more things you can do.

2. Renaming the Media Cache Folder

The default location of Media Cache Database and Media Cache Files folders is /Users/Library/Application Support/Adobe/Common on Mac computers and \Users\\AppData\Roaming\Adobe\Common on PC computers. So all you have to do is make sure that all Adobe applications, including the Adobe Premiere Pro, are closed and then go to the location at which these folders are stored and change their names to Media Cache Files_OLD and Media Cache_OLD. Start Adobe Premiere Pro and check if you can import your video files into the editor.

3. Moving Media Files to a Different Folder

If renaming the folders didn’t do the trick you can try moving them from their default location. You can move them wherever you want on your computer, but it is best if you pick a location that is easy to remember, just so you can access them quickly in case you need to delete files that are stored in them.

4. Installing the QuickTime Player

Sometimes the simplest solution is also the most effective one. Check if QuickTime is installed on your computer because installing this player can solve the audio importing issues in Adobe Premiere Pro. Furthermore, if you just reinstalled the OS on your computer, you should download and install QuickTime , before launching Adobe Premiere Pro. Once you create a new project go to the Edit menu, find the Preferences submenu and select the Media option. Clean both the Media Cache Database and Media Cache Files folders, restart Adobe Premiere Pro and then import the video files into your project.

An Alternative Way to Import Video Without This Issue

If you fail to import your video across Adobe Premiere Pro and want to get some work done across the file, you can look for Wondershare Filmora. Filmora provides a pervasive set of tools to work with. With multiple editing tools to work with, you can easily manage your audio across the platform. Filmora provides a self-explanatory and clean user interface to work with.

While being very simple and effective to use, Filmora provides a very powerful structure which makes it one of the best in the market. It can indeed prove to be an excellent alternative to Adobe Premiere Pro. Considering the user experience of Filmora, users can feel safe while working across it.

Steps to Import Videos in Wondershare Filmora

As Filmora provides a very good user experience, they can import their audios by following the step-by-step guide provided below.

Step 1: Create a New Video Project

You need to access the official website of Filmora and download the software. Once installed, launch the software. To create a new project, tap on the “New Project” button to proceed.

Step 2: Import from File Tab

Once a new window opens, three different methods can be used to import audio on Filmora. Tap on “File” to select the option of “Import Media Files” from “Import Media” in the drop-down menu.

Step 3: Import from Import Button

The second method calls up users to import audio through a button. The user needs to tap on the “Import Media Files Here” button to add audio in Filmora directly.

Step 4: Import by Drag and Drop

Users can import audios on Filmora in another way. They can drag and drop the audio files directly on the platform and perform functions using different tools.

Conclusion

If the methods of fixing the audio importing issues in Adobe Premiere Pro we presented in this article don’t help you solve this problem, you should consider reinstalling the OS on your computer. Was this article helpful? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

All video files that are captured with GoPro and other types of digital cameras contain sound, but in certain situations, you may get the ‘The file has no audio or video streams’ after you try to import mp4, mov and MTS files into Adobe Premiere Pro.

This can be quite frustrating, even though, in most cases, you won’t use the sound that was recorded by the camera in the final cut of your video. This problem can be solved quickly, so in this article, we are going to show you a few different methods of fixing audio importing issues in Adobe Premiere Pro.

Read More to Get : Best Audio Mixer Software to Trim Your Sound Easily >>

Four Ways to Solve Audio Importing Issues in Adobe Premiere Pro

There are numerous factors that can cause Adobe Premiere Pro to stop functioning properly , and if the app won’t let you import video files into a project because it has no audio or video streams, there are few things you can do to fix this without having to reinstall the operating system on your computer or the version of Adobe Premiere Pro you’re currently using.

1. Clearing the Media File Cache

If you tried to import a video file into a project and the app notified you that it cannot import the file because there is no audio stream, you should head over to the Edit menu and select the Preferences Tab. Once the Preferences window pops up on the screen, click on the Media tab and then proceed to delete all files that are stored in the Media Cache Database and Media Cache Files folders. Restart the application after you’ve cleaned both of these folders and try to import the video clips into the project once more. If the issue persists, there are a few more things you can do.

2. Renaming the Media Cache Folder

The default location of Media Cache Database and Media Cache Files folders is /Users/Library/Application Support/Adobe/Common on Mac computers and \Users\\AppData\Roaming\Adobe\Common on PC computers. So all you have to do is make sure that all Adobe applications, including the Adobe Premiere Pro, are closed and then go to the location at which these folders are stored and change their names to Media Cache Files_OLD and Media Cache_OLD. Start Adobe Premiere Pro and check if you can import your video files into the editor.

3. Moving Media Files to a Different Folder

If renaming the folders didn’t do the trick you can try moving them from their default location. You can move them wherever you want on your computer, but it is best if you pick a location that is easy to remember, just so you can access them quickly in case you need to delete files that are stored in them.

4. Installing the QuickTime Player

Sometimes the simplest solution is also the most effective one. Check if QuickTime is installed on your computer because installing this player can solve the audio importing issues in Adobe Premiere Pro. Furthermore, if you just reinstalled the OS on your computer, you should download and install QuickTime , before launching Adobe Premiere Pro. Once you create a new project go to the Edit menu, find the Preferences submenu and select the Media option. Clean both the Media Cache Database and Media Cache Files folders, restart Adobe Premiere Pro and then import the video files into your project.

An Alternative Way to Import Video Without This Issue

If you fail to import your video across Adobe Premiere Pro and want to get some work done across the file, you can look for Wondershare Filmora. Filmora provides a pervasive set of tools to work with. With multiple editing tools to work with, you can easily manage your audio across the platform. Filmora provides a self-explanatory and clean user interface to work with.

While being very simple and effective to use, Filmora provides a very powerful structure which makes it one of the best in the market. It can indeed prove to be an excellent alternative to Adobe Premiere Pro. Considering the user experience of Filmora, users can feel safe while working across it.

Steps to Import Videos in Wondershare Filmora

As Filmora provides a very good user experience, they can import their audios by following the step-by-step guide provided below.

Step 1: Create a New Video Project

You need to access the official website of Filmora and download the software. Once installed, launch the software. To create a new project, tap on the “New Project” button to proceed.

Step 2: Import from File Tab

Once a new window opens, three different methods can be used to import audio on Filmora. Tap on “File” to select the option of “Import Media Files” from “Import Media” in the drop-down menu.

Step 3: Import from Import Button

The second method calls up users to import audio through a button. The user needs to tap on the “Import Media Files Here” button to add audio in Filmora directly.

Step 4: Import by Drag and Drop

Users can import audios on Filmora in another way. They can drag and drop the audio files directly on the platform and perform functions using different tools.

Conclusion

If the methods of fixing the audio importing issues in Adobe Premiere Pro we presented in this article don’t help you solve this problem, you should consider reinstalling the OS on your computer. Was this article helpful? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

All video files that are captured with GoPro and other types of digital cameras contain sound, but in certain situations, you may get the ‘The file has no audio or video streams’ after you try to import mp4, mov and MTS files into Adobe Premiere Pro.

This can be quite frustrating, even though, in most cases, you won’t use the sound that was recorded by the camera in the final cut of your video. This problem can be solved quickly, so in this article, we are going to show you a few different methods of fixing audio importing issues in Adobe Premiere Pro.

Read More to Get : Best Audio Mixer Software to Trim Your Sound Easily >>

Four Ways to Solve Audio Importing Issues in Adobe Premiere Pro

There are numerous factors that can cause Adobe Premiere Pro to stop functioning properly , and if the app won’t let you import video files into a project because it has no audio or video streams, there are few things you can do to fix this without having to reinstall the operating system on your computer or the version of Adobe Premiere Pro you’re currently using.

1. Clearing the Media File Cache

If you tried to import a video file into a project and the app notified you that it cannot import the file because there is no audio stream, you should head over to the Edit menu and select the Preferences Tab. Once the Preferences window pops up on the screen, click on the Media tab and then proceed to delete all files that are stored in the Media Cache Database and Media Cache Files folders. Restart the application after you’ve cleaned both of these folders and try to import the video clips into the project once more. If the issue persists, there are a few more things you can do.

2. Renaming the Media Cache Folder

The default location of Media Cache Database and Media Cache Files folders is /Users/Library/Application Support/Adobe/Common on Mac computers and \Users\\AppData\Roaming\Adobe\Common on PC computers. So all you have to do is make sure that all Adobe applications, including the Adobe Premiere Pro, are closed and then go to the location at which these folders are stored and change their names to Media Cache Files_OLD and Media Cache_OLD. Start Adobe Premiere Pro and check if you can import your video files into the editor.

3. Moving Media Files to a Different Folder

If renaming the folders didn’t do the trick you can try moving them from their default location. You can move them wherever you want on your computer, but it is best if you pick a location that is easy to remember, just so you can access them quickly in case you need to delete files that are stored in them.

4. Installing the QuickTime Player

Sometimes the simplest solution is also the most effective one. Check if QuickTime is installed on your computer because installing this player can solve the audio importing issues in Adobe Premiere Pro. Furthermore, if you just reinstalled the OS on your computer, you should download and install QuickTime , before launching Adobe Premiere Pro. Once you create a new project go to the Edit menu, find the Preferences submenu and select the Media option. Clean both the Media Cache Database and Media Cache Files folders, restart Adobe Premiere Pro and then import the video files into your project.

An Alternative Way to Import Video Without This Issue

If you fail to import your video across Adobe Premiere Pro and want to get some work done across the file, you can look for Wondershare Filmora. Filmora provides a pervasive set of tools to work with. With multiple editing tools to work with, you can easily manage your audio across the platform. Filmora provides a self-explanatory and clean user interface to work with.

While being very simple and effective to use, Filmora provides a very powerful structure which makes it one of the best in the market. It can indeed prove to be an excellent alternative to Adobe Premiere Pro. Considering the user experience of Filmora, users can feel safe while working across it.

Steps to Import Videos in Wondershare Filmora

As Filmora provides a very good user experience, they can import their audios by following the step-by-step guide provided below.

Step 1: Create a New Video Project

You need to access the official website of Filmora and download the software. Once installed, launch the software. To create a new project, tap on the “New Project” button to proceed.

Step 2: Import from File Tab

Once a new window opens, three different methods can be used to import audio on Filmora. Tap on “File” to select the option of “Import Media Files” from “Import Media” in the drop-down menu.

Step 3: Import from Import Button

The second method calls up users to import audio through a button. The user needs to tap on the “Import Media Files Here” button to add audio in Filmora directly.

Step 4: Import by Drag and Drop

Users can import audios on Filmora in another way. They can drag and drop the audio files directly on the platform and perform functions using different tools.

Conclusion

If the methods of fixing the audio importing issues in Adobe Premiere Pro we presented in this article don’t help you solve this problem, you should consider reinstalling the OS on your computer. Was this article helpful? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

All video files that are captured with GoPro and other types of digital cameras contain sound, but in certain situations, you may get the ‘The file has no audio or video streams’ after you try to import mp4, mov and MTS files into Adobe Premiere Pro.

This can be quite frustrating, even though, in most cases, you won’t use the sound that was recorded by the camera in the final cut of your video. This problem can be solved quickly, so in this article, we are going to show you a few different methods of fixing audio importing issues in Adobe Premiere Pro.

Read More to Get : Best Audio Mixer Software to Trim Your Sound Easily >>

Four Ways to Solve Audio Importing Issues in Adobe Premiere Pro

There are numerous factors that can cause Adobe Premiere Pro to stop functioning properly , and if the app won’t let you import video files into a project because it has no audio or video streams, there are few things you can do to fix this without having to reinstall the operating system on your computer or the version of Adobe Premiere Pro you’re currently using.

1. Clearing the Media File Cache

If you tried to import a video file into a project and the app notified you that it cannot import the file because there is no audio stream, you should head over to the Edit menu and select the Preferences Tab. Once the Preferences window pops up on the screen, click on the Media tab and then proceed to delete all files that are stored in the Media Cache Database and Media Cache Files folders. Restart the application after you’ve cleaned both of these folders and try to import the video clips into the project once more. If the issue persists, there are a few more things you can do.

2. Renaming the Media Cache Folder

The default location of Media Cache Database and Media Cache Files folders is /Users/Library/Application Support/Adobe/Common on Mac computers and \Users\\AppData\Roaming\Adobe\Common on PC computers. So all you have to do is make sure that all Adobe applications, including the Adobe Premiere Pro, are closed and then go to the location at which these folders are stored and change their names to Media Cache Files_OLD and Media Cache_OLD. Start Adobe Premiere Pro and check if you can import your video files into the editor.

3. Moving Media Files to a Different Folder

If renaming the folders didn’t do the trick you can try moving them from their default location. You can move them wherever you want on your computer, but it is best if you pick a location that is easy to remember, just so you can access them quickly in case you need to delete files that are stored in them.

4. Installing the QuickTime Player

Sometimes the simplest solution is also the most effective one. Check if QuickTime is installed on your computer because installing this player can solve the audio importing issues in Adobe Premiere Pro. Furthermore, if you just reinstalled the OS on your computer, you should download and install QuickTime , before launching Adobe Premiere Pro. Once you create a new project go to the Edit menu, find the Preferences submenu and select the Media option. Clean both the Media Cache Database and Media Cache Files folders, restart Adobe Premiere Pro and then import the video files into your project.

An Alternative Way to Import Video Without This Issue

If you fail to import your video across Adobe Premiere Pro and want to get some work done across the file, you can look for Wondershare Filmora. Filmora provides a pervasive set of tools to work with. With multiple editing tools to work with, you can easily manage your audio across the platform. Filmora provides a self-explanatory and clean user interface to work with.

While being very simple and effective to use, Filmora provides a very powerful structure which makes it one of the best in the market. It can indeed prove to be an excellent alternative to Adobe Premiere Pro. Considering the user experience of Filmora, users can feel safe while working across it.

Steps to Import Videos in Wondershare Filmora

As Filmora provides a very good user experience, they can import their audios by following the step-by-step guide provided below.

Step 1: Create a New Video Project

You need to access the official website of Filmora and download the software. Once installed, launch the software. To create a new project, tap on the “New Project” button to proceed.

Step 2: Import from File Tab

Once a new window opens, three different methods can be used to import audio on Filmora. Tap on “File” to select the option of “Import Media Files” from “Import Media” in the drop-down menu.

Step 3: Import from Import Button

The second method calls up users to import audio through a button. The user needs to tap on the “Import Media Files Here” button to add audio in Filmora directly.

Step 4: Import by Drag and Drop

Users can import audios on Filmora in another way. They can drag and drop the audio files directly on the platform and perform functions using different tools.

Conclusion

If the methods of fixing the audio importing issues in Adobe Premiere Pro we presented in this article don’t help you solve this problem, you should consider reinstalling the OS on your computer. Was this article helpful? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: