“Top 5 Effective Complimentary Audio Level Optimizers”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

“The Beginner’s Blueprint to Creating an Audio Book with Ease: A Compreranly Updated Manual “

How to Make an Audio Book with Ease: a Complete Guide

Benjamin Arango

Mar 27, 2024• Proven solutions

Our busy lives have made reading a physical book nearly impossible. Although we have enough eBooks on the market, it also requires some effort and time to be invested. Most of the people are bothered by not reading enough.

Maybe that is why we have witnessed tremendous growth of audiobooks in the past three years. And as a result, the development of the audiobook market per year is found to be 30%. That implies the audiobook market is growing almost four times faster than the eBook market.

So, don’t you see the necessity to publish your piece of writing in the form of an audiobook, as well?

Are you now wondering how to make an audiobook? It involves no rocket science, but the process is a bit hard than publishing in Kindle. Here are all your queries answered, and you will learn how to make your own audiobook by the end of this article.

• Part 1: What Are the Benefits of Making an Audiobook?
• Part 2: How To Create an Audiobook Effortlessly?
• Part 3: How to Make Your Own Audiobook Creatively?

Part 1: What Are the Benefits of Making an Audiobook?

The benefits of getting your book published in the format of an audiobook are numerous. You are missing out on audiences and profit if you constrain the publication of your book just into the form of paperbacks or eBooks. Nowadays, audiobooks actually make more sense with a large number of audiobook listeners worldwide.

Here are some potential advantages of audiobooks and why you should learn how to create an audiobook:

1.More profit

According to the latest pieces of research, most Americans prefer listening to audiobooks rather than reading an eBook. And as a result, the audiobook industry has now become very profitable.

Apart from the popularity, the cost of making an audiobook from an existing book is comparatively on the lower side. Therefore, the profit of converting books into audiobooks is pretty high.

2.Larger audience

Audiobooks comparatively have a larger audience. The audience of audiobooks is not limited to those who are capable of reading. For example, a person with low or blind vision cannot read an eBook, but he can effortlessly listen to an audiobook. Likewise, an audiobook takes your piece of writing to a completely different and larger group of audience.

3.No worries about stock

When publishing a physical book, you have to constantly worry about keeping the print in stock and meeting readers’ demands. You can avoid such worries when you opt for audiobooks. In the case of audiobooks, there always exists a file accessible for readers to download and read.

4.Easy discovery

Your book will become easily discoverable when you publish it in the version of an audiobook also. Printed books are comparatively least discoverable online unless they have an audiobook version. The more discoverable your book is, the more is its reach to the targeted audience.

5.Save on time and expenses

The creation of audiobooks is comparatively easy and low in cost. You can either hire services like ACX and Audiobook Creation Exchange. Or else, you can nowadays also create audiobooks on your own by using online programs such as Filmii.

Part 2: How To Create an Audiobook Effortlessly?

We have seen the advantages of transferring your book into audiobook format in the last section. Now the question is how to make an audiobook effortlessly. There are actually two ways in which you can create an audiobook.

1. You can get the professional help of an audiobook production company.
2. Record the audiobook yourself.

At first thought, you may feel like recording the audiobook yourself will help you save the cost of the process. But actually, recording the audiobook yourself will be more expensive in terms of money and time.

Anyways, let us see the basic steps of the creation of an audiobook.

• **Step One:**Prepare the contents of your book for recording. If it is an eBook, better delete the hyperlinks, visuals, and call to action that may cause distractions to the narrator. Ensure that the content or script can be easily read and makes some sense when listened to as an audiobook.
• **Step Two:**Find a narrator. It can be yourself or someone hired for the purpose. You can actually hire an audiobook narrator for the purpose. Surprisingly, audiobook narrators are super-affordable, and they will get the task done effortlessly.
• **Step Three:**Get the audio files recorded by the narrator mastered or edited by an audiobook producer to ensure the quality of the final production file. You can do it yourself if your technical knowledge is sound and good enough.
• Step Four: Now, the last step is uploading your audiobook into ACX or Audiobook Creation Exchange.

And that is how an audiobook is created. By uploading on ACX, you can make your audiobook available and discoverable on most audiobook platforms, including Amazon, Apple audiobook store, and Audible.

You have to open an account on ACX to upload your audiobook. An ACX account can be easily created by entering your Amazon account and tax details. After signing up, you have to choose whether you need an exclusive publication or a non-exclusive publication for your audiobook.

Exclusive publication of your audiobook allows you to get a higher commission or royalty share of 40%. But your audiobook won’t be published on other competing sites. In contrast, your audiobook will get published on multiple sites if you choose a non-exclusive publication. But the royalty share reduces to just 25%. That’s all about ACX.

Now let us see how to make an audiobook of your own.

Part 3: How to Make Your Own Audiobook Creatively?

Most people don’t convert their books to audiobooks mainly for two reasons. Firstly, assuming that creating an audiobook is going to be an expensive task. Secondly, most of them don’t know how to create an audiobook on their own.

So, we are going to discuss how to make your own audiobook.

First of all, to make your own audiobook, you need a set of equipment, including a USB mic, pop filter, and audible. Then, choose a studio and quiet place for narration and recording. The task is simple and uncomplicated until here. What most people find difficult is in editing or engineering the audio files.

So, here we are introducing Wondershare Filmora for making the creation of audiobooks effortless.

The audio editing tools on Wondershare Filmora allow you to record audio, add audio-video, and edit the audio. With the audio editing tools on the Filmora, you have the options to adjust, fade-in, fade-out, or de-noise the audio.

You can use the de-noise option to remove the background sounds on your audio files. Wondershare Filmora also allows you to adjust the speed of the audio. You can adjust the speed of your audio file by setting up a duration.

Conclusion

You no longer have to stay confused about how to make an audiobook. We have simplified the creation of the audiobook with our stepwise guide. If you want to make an audiobook your own, you can use audio editors such as Wondershare Filmora.

We hope you won’t be any more intimidated on how to make your own audiobook. An audiobook is a highly potent form to reach your targeted audience. So, don’t allow your lack of knowledge to affect the growth of your book.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Our busy lives have made reading a physical book nearly impossible. Although we have enough eBooks on the market, it also requires some effort and time to be invested. Most of the people are bothered by not reading enough.

Maybe that is why we have witnessed tremendous growth of audiobooks in the past three years. And as a result, the development of the audiobook market per year is found to be 30%. That implies the audiobook market is growing almost four times faster than the eBook market.

So, don’t you see the necessity to publish your piece of writing in the form of an audiobook, as well?

Are you now wondering how to make an audiobook? It involves no rocket science, but the process is a bit hard than publishing in Kindle. Here are all your queries answered, and you will learn how to make your own audiobook by the end of this article.

• Part 1: What Are the Benefits of Making an Audiobook?
• Part 2: How To Create an Audiobook Effortlessly?
• Part 3: How to Make Your Own Audiobook Creatively?

Part 1: What Are the Benefits of Making an Audiobook?

The benefits of getting your book published in the format of an audiobook are numerous. You are missing out on audiences and profit if you constrain the publication of your book just into the form of paperbacks or eBooks. Nowadays, audiobooks actually make more sense with a large number of audiobook listeners worldwide.

Here are some potential advantages of audiobooks and why you should learn how to create an audiobook:

1.More profit

According to the latest pieces of research, most Americans prefer listening to audiobooks rather than reading an eBook. And as a result, the audiobook industry has now become very profitable.

Apart from the popularity, the cost of making an audiobook from an existing book is comparatively on the lower side. Therefore, the profit of converting books into audiobooks is pretty high.

2.Larger audience

Audiobooks comparatively have a larger audience. The audience of audiobooks is not limited to those who are capable of reading. For example, a person with low or blind vision cannot read an eBook, but he can effortlessly listen to an audiobook. Likewise, an audiobook takes your piece of writing to a completely different and larger group of audience.

3.No worries about stock

When publishing a physical book, you have to constantly worry about keeping the print in stock and meeting readers’ demands. You can avoid such worries when you opt for audiobooks. In the case of audiobooks, there always exists a file accessible for readers to download and read.

4.Easy discovery

Your book will become easily discoverable when you publish it in the version of an audiobook also. Printed books are comparatively least discoverable online unless they have an audiobook version. The more discoverable your book is, the more is its reach to the targeted audience.

5.Save on time and expenses

The creation of audiobooks is comparatively easy and low in cost. You can either hire services like ACX and Audiobook Creation Exchange. Or else, you can nowadays also create audiobooks on your own by using online programs such as Filmii.

Part 2: How To Create an Audiobook Effortlessly?

We have seen the advantages of transferring your book into audiobook format in the last section. Now the question is how to make an audiobook effortlessly. There are actually two ways in which you can create an audiobook.

1. You can get the professional help of an audiobook production company.
2. Record the audiobook yourself.

At first thought, you may feel like recording the audiobook yourself will help you save the cost of the process. But actually, recording the audiobook yourself will be more expensive in terms of money and time.

Anyways, let us see the basic steps of the creation of an audiobook.

• **Step One:**Prepare the contents of your book for recording. If it is an eBook, better delete the hyperlinks, visuals, and call to action that may cause distractions to the narrator. Ensure that the content or script can be easily read and makes some sense when listened to as an audiobook.
• **Step Two:**Find a narrator. It can be yourself or someone hired for the purpose. You can actually hire an audiobook narrator for the purpose. Surprisingly, audiobook narrators are super-affordable, and they will get the task done effortlessly.
• **Step Three:**Get the audio files recorded by the narrator mastered or edited by an audiobook producer to ensure the quality of the final production file. You can do it yourself if your technical knowledge is sound and good enough.
• Step Four: Now, the last step is uploading your audiobook into ACX or Audiobook Creation Exchange.

And that is how an audiobook is created. By uploading on ACX, you can make your audiobook available and discoverable on most audiobook platforms, including Amazon, Apple audiobook store, and Audible.

You have to open an account on ACX to upload your audiobook. An ACX account can be easily created by entering your Amazon account and tax details. After signing up, you have to choose whether you need an exclusive publication or a non-exclusive publication for your audiobook.

Exclusive publication of your audiobook allows you to get a higher commission or royalty share of 40%. But your audiobook won’t be published on other competing sites. In contrast, your audiobook will get published on multiple sites if you choose a non-exclusive publication. But the royalty share reduces to just 25%. That’s all about ACX.

Now let us see how to make an audiobook of your own.

Part 3: How to Make Your Own Audiobook Creatively?

Most people don’t convert their books to audiobooks mainly for two reasons. Firstly, assuming that creating an audiobook is going to be an expensive task. Secondly, most of them don’t know how to create an audiobook on their own.

So, we are going to discuss how to make your own audiobook.

First of all, to make your own audiobook, you need a set of equipment, including a USB mic, pop filter, and audible. Then, choose a studio and quiet place for narration and recording. The task is simple and uncomplicated until here. What most people find difficult is in editing or engineering the audio files.

So, here we are introducing Wondershare Filmora for making the creation of audiobooks effortless.

The audio editing tools on Wondershare Filmora allow you to record audio, add audio-video, and edit the audio. With the audio editing tools on the Filmora, you have the options to adjust, fade-in, fade-out, or de-noise the audio.

You can use the de-noise option to remove the background sounds on your audio files. Wondershare Filmora also allows you to adjust the speed of the audio. You can adjust the speed of your audio file by setting up a duration.

Conclusion

You no longer have to stay confused about how to make an audiobook. We have simplified the creation of the audiobook with our stepwise guide. If you want to make an audiobook your own, you can use audio editors such as Wondershare Filmora.

We hope you won’t be any more intimidated on how to make your own audiobook. An audiobook is a highly potent form to reach your targeted audience. So, don’t allow your lack of knowledge to affect the growth of your book.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Our busy lives have made reading a physical book nearly impossible. Although we have enough eBooks on the market, it also requires some effort and time to be invested. Most of the people are bothered by not reading enough.

Maybe that is why we have witnessed tremendous growth of audiobooks in the past three years. And as a result, the development of the audiobook market per year is found to be 30%. That implies the audiobook market is growing almost four times faster than the eBook market.

So, don’t you see the necessity to publish your piece of writing in the form of an audiobook, as well?

Are you now wondering how to make an audiobook? It involves no rocket science, but the process is a bit hard than publishing in Kindle. Here are all your queries answered, and you will learn how to make your own audiobook by the end of this article.

• Part 1: What Are the Benefits of Making an Audiobook?
• Part 2: How To Create an Audiobook Effortlessly?
• Part 3: How to Make Your Own Audiobook Creatively?

Part 1: What Are the Benefits of Making an Audiobook?

The benefits of getting your book published in the format of an audiobook are numerous. You are missing out on audiences and profit if you constrain the publication of your book just into the form of paperbacks or eBooks. Nowadays, audiobooks actually make more sense with a large number of audiobook listeners worldwide.

Here are some potential advantages of audiobooks and why you should learn how to create an audiobook:

1.More profit

According to the latest pieces of research, most Americans prefer listening to audiobooks rather than reading an eBook. And as a result, the audiobook industry has now become very profitable.

Apart from the popularity, the cost of making an audiobook from an existing book is comparatively on the lower side. Therefore, the profit of converting books into audiobooks is pretty high.

2.Larger audience

Audiobooks comparatively have a larger audience. The audience of audiobooks is not limited to those who are capable of reading. For example, a person with low or blind vision cannot read an eBook, but he can effortlessly listen to an audiobook. Likewise, an audiobook takes your piece of writing to a completely different and larger group of audience.

3.No worries about stock

When publishing a physical book, you have to constantly worry about keeping the print in stock and meeting readers’ demands. You can avoid such worries when you opt for audiobooks. In the case of audiobooks, there always exists a file accessible for readers to download and read.

4.Easy discovery

Your book will become easily discoverable when you publish it in the version of an audiobook also. Printed books are comparatively least discoverable online unless they have an audiobook version. The more discoverable your book is, the more is its reach to the targeted audience.

5.Save on time and expenses

The creation of audiobooks is comparatively easy and low in cost. You can either hire services like ACX and Audiobook Creation Exchange. Or else, you can nowadays also create audiobooks on your own by using online programs such as Filmii.

Part 2: How To Create an Audiobook Effortlessly?

We have seen the advantages of transferring your book into audiobook format in the last section. Now the question is how to make an audiobook effortlessly. There are actually two ways in which you can create an audiobook.

1. You can get the professional help of an audiobook production company.
2. Record the audiobook yourself.

At first thought, you may feel like recording the audiobook yourself will help you save the cost of the process. But actually, recording the audiobook yourself will be more expensive in terms of money and time.

Anyways, let us see the basic steps of the creation of an audiobook.

• **Step One:**Prepare the contents of your book for recording. If it is an eBook, better delete the hyperlinks, visuals, and call to action that may cause distractions to the narrator. Ensure that the content or script can be easily read and makes some sense when listened to as an audiobook.
• **Step Two:**Find a narrator. It can be yourself or someone hired for the purpose. You can actually hire an audiobook narrator for the purpose. Surprisingly, audiobook narrators are super-affordable, and they will get the task done effortlessly.
• **Step Three:**Get the audio files recorded by the narrator mastered or edited by an audiobook producer to ensure the quality of the final production file. You can do it yourself if your technical knowledge is sound and good enough.
• Step Four: Now, the last step is uploading your audiobook into ACX or Audiobook Creation Exchange.

And that is how an audiobook is created. By uploading on ACX, you can make your audiobook available and discoverable on most audiobook platforms, including Amazon, Apple audiobook store, and Audible.

You have to open an account on ACX to upload your audiobook. An ACX account can be easily created by entering your Amazon account and tax details. After signing up, you have to choose whether you need an exclusive publication or a non-exclusive publication for your audiobook.

Exclusive publication of your audiobook allows you to get a higher commission or royalty share of 40%. But your audiobook won’t be published on other competing sites. In contrast, your audiobook will get published on multiple sites if you choose a non-exclusive publication. But the royalty share reduces to just 25%. That’s all about ACX.

Now let us see how to make an audiobook of your own.

Part 3: How to Make Your Own Audiobook Creatively?

Most people don’t convert their books to audiobooks mainly for two reasons. Firstly, assuming that creating an audiobook is going to be an expensive task. Secondly, most of them don’t know how to create an audiobook on their own.

So, we are going to discuss how to make your own audiobook.

First of all, to make your own audiobook, you need a set of equipment, including a USB mic, pop filter, and audible. Then, choose a studio and quiet place for narration and recording. The task is simple and uncomplicated until here. What most people find difficult is in editing or engineering the audio files.

So, here we are introducing Wondershare Filmora for making the creation of audiobooks effortless.

The audio editing tools on Wondershare Filmora allow you to record audio, add audio-video, and edit the audio. With the audio editing tools on the Filmora, you have the options to adjust, fade-in, fade-out, or de-noise the audio.

You can use the de-noise option to remove the background sounds on your audio files. Wondershare Filmora also allows you to adjust the speed of the audio. You can adjust the speed of your audio file by setting up a duration.

Conclusion

You no longer have to stay confused about how to make an audiobook. We have simplified the creation of the audiobook with our stepwise guide. If you want to make an audiobook your own, you can use audio editors such as Wondershare Filmora.

We hope you won’t be any more intimidated on how to make your own audiobook. An audiobook is a highly potent form to reach your targeted audience. So, don’t allow your lack of knowledge to affect the growth of your book.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Our busy lives have made reading a physical book nearly impossible. Although we have enough eBooks on the market, it also requires some effort and time to be invested. Most of the people are bothered by not reading enough.

Maybe that is why we have witnessed tremendous growth of audiobooks in the past three years. And as a result, the development of the audiobook market per year is found to be 30%. That implies the audiobook market is growing almost four times faster than the eBook market.

So, don’t you see the necessity to publish your piece of writing in the form of an audiobook, as well?

Are you now wondering how to make an audiobook? It involves no rocket science, but the process is a bit hard than publishing in Kindle. Here are all your queries answered, and you will learn how to make your own audiobook by the end of this article.

• Part 1: What Are the Benefits of Making an Audiobook?
• Part 2: How To Create an Audiobook Effortlessly?
• Part 3: How to Make Your Own Audiobook Creatively?

Part 1: What Are the Benefits of Making an Audiobook?

The benefits of getting your book published in the format of an audiobook are numerous. You are missing out on audiences and profit if you constrain the publication of your book just into the form of paperbacks or eBooks. Nowadays, audiobooks actually make more sense with a large number of audiobook listeners worldwide.

Here are some potential advantages of audiobooks and why you should learn how to create an audiobook:

1.More profit

According to the latest pieces of research, most Americans prefer listening to audiobooks rather than reading an eBook. And as a result, the audiobook industry has now become very profitable.

Apart from the popularity, the cost of making an audiobook from an existing book is comparatively on the lower side. Therefore, the profit of converting books into audiobooks is pretty high.

2.Larger audience

Audiobooks comparatively have a larger audience. The audience of audiobooks is not limited to those who are capable of reading. For example, a person with low or blind vision cannot read an eBook, but he can effortlessly listen to an audiobook. Likewise, an audiobook takes your piece of writing to a completely different and larger group of audience.

3.No worries about stock

When publishing a physical book, you have to constantly worry about keeping the print in stock and meeting readers’ demands. You can avoid such worries when you opt for audiobooks. In the case of audiobooks, there always exists a file accessible for readers to download and read.

4.Easy discovery

Your book will become easily discoverable when you publish it in the version of an audiobook also. Printed books are comparatively least discoverable online unless they have an audiobook version. The more discoverable your book is, the more is its reach to the targeted audience.

5.Save on time and expenses

The creation of audiobooks is comparatively easy and low in cost. You can either hire services like ACX and Audiobook Creation Exchange. Or else, you can nowadays also create audiobooks on your own by using online programs such as Filmii.

Part 2: How To Create an Audiobook Effortlessly?

We have seen the advantages of transferring your book into audiobook format in the last section. Now the question is how to make an audiobook effortlessly. There are actually two ways in which you can create an audiobook.

1. You can get the professional help of an audiobook production company.
2. Record the audiobook yourself.

At first thought, you may feel like recording the audiobook yourself will help you save the cost of the process. But actually, recording the audiobook yourself will be more expensive in terms of money and time.

Anyways, let us see the basic steps of the creation of an audiobook.

• **Step One:**Prepare the contents of your book for recording. If it is an eBook, better delete the hyperlinks, visuals, and call to action that may cause distractions to the narrator. Ensure that the content or script can be easily read and makes some sense when listened to as an audiobook.
• **Step Two:**Find a narrator. It can be yourself or someone hired for the purpose. You can actually hire an audiobook narrator for the purpose. Surprisingly, audiobook narrators are super-affordable, and they will get the task done effortlessly.
• **Step Three:**Get the audio files recorded by the narrator mastered or edited by an audiobook producer to ensure the quality of the final production file. You can do it yourself if your technical knowledge is sound and good enough.
• Step Four: Now, the last step is uploading your audiobook into ACX or Audiobook Creation Exchange.

And that is how an audiobook is created. By uploading on ACX, you can make your audiobook available and discoverable on most audiobook platforms, including Amazon, Apple audiobook store, and Audible.

You have to open an account on ACX to upload your audiobook. An ACX account can be easily created by entering your Amazon account and tax details. After signing up, you have to choose whether you need an exclusive publication or a non-exclusive publication for your audiobook.

Exclusive publication of your audiobook allows you to get a higher commission or royalty share of 40%. But your audiobook won’t be published on other competing sites. In contrast, your audiobook will get published on multiple sites if you choose a non-exclusive publication. But the royalty share reduces to just 25%. That’s all about ACX.

Now let us see how to make an audiobook of your own.

Part 3: How to Make Your Own Audiobook Creatively?

Most people don’t convert their books to audiobooks mainly for two reasons. Firstly, assuming that creating an audiobook is going to be an expensive task. Secondly, most of them don’t know how to create an audiobook on their own.

So, we are going to discuss how to make your own audiobook.

First of all, to make your own audiobook, you need a set of equipment, including a USB mic, pop filter, and audible. Then, choose a studio and quiet place for narration and recording. The task is simple and uncomplicated until here. What most people find difficult is in editing or engineering the audio files.

So, here we are introducing Wondershare Filmora for making the creation of audiobooks effortless.

The audio editing tools on Wondershare Filmora allow you to record audio, add audio-video, and edit the audio. With the audio editing tools on the Filmora, you have the options to adjust, fade-in, fade-out, or de-noise the audio.

You can use the de-noise option to remove the background sounds on your audio files. Wondershare Filmora also allows you to adjust the speed of the audio. You can adjust the speed of your audio file by setting up a duration.

Conclusion

You no longer have to stay confused about how to make an audiobook. We have simplified the creation of the audiobook with our stepwise guide. If you want to make an audiobook your own, you can use audio editors such as Wondershare Filmora.

We hope you won’t be any more intimidated on how to make your own audiobook. An audiobook is a highly potent form to reach your targeted audience. So, don’t allow your lack of knowledge to affect the growth of your book.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Essential Mac Audio Tools: Discovering the Top 5 Mixers

If you’ve ever considered singing, you might look for the ideal audio mixer that allows you to record, edit, and seamlessly mix audio. The suitable audio mixer for Mac enables you to create the best tracks for your audience. Even for professionals, a suitable audio mixer is essential for music producers because it helps them create good music and deliver crisp audio.

Even with quality sounds, you might find that your audio file comes with many traffic noises and unnecessary chatter. The ideal audio mixer will ensure your audio piece stands out. However, we know that finding the ideal audio mixer that’s compatible with the Mac operating system can be challenging. That’s why we’ve done the essential research for you and compiled this impressive list. So, let’s jump straight into the comprehensive list to determine the best audio mixer for you.

Audacity

We’re going to start with a veteran in the audio mixing world. Audacity has been around since 2000 and has continually updated its features to become a quality audio mixer. This explains why it is the best audio editing software out there. Audacity is free, open-source, and works across different platforms. It is also relatively simple to use by professionals and beginners; you don’t need to have any previous audio mixing experience to use this tool.

There are varying activities you can carry out on Audacity. For example, it allows you to record, edit, and add effects to your audio like distortion, reverb, echoes, and auto-tune. With Audacity, you can also digitize recordings from various media files. In addition, many keyboard shortcuts work with Audacity; using these shortcuts allows for a faster and more seamless workflow.

Using this tool, you can visualize the audio in frequencies using the spectrogram mode. It also offers professional-grade plugins to improve the mixing process. If you’d like to improve the sound quality of your file, you can choose to export in 24-bits or 32-bits. Beyond the Mac OS, Audacity also supports Linux and Windows. You should consider Audacity if you want a free editor with many audio mixing functions.

Pros

• It is intuitive and easy to use
• Offers varying plugins for easy mixing
• Keyboard shortcuts improve workflow
• Rich features to enhance overall sound quality

Cons

• Audacity tends to crash on Mac

Adobe Audition

We all know that Adobe only offers excellent software, and you can expect nothing different from Adobe Audition. This is a great audio mixer for editing and polishing your audio, making it into an impeccable sound. It allows you clean, mixes, and fine-tune your sound file by offering a smooth workflow. In addition, Adobe Audition offers a spectral display and a crucial sound panel that helps you restore audio. This tool also helps users achieve a professional-level quality even if you’re a beginner with little to no audio-mixing experience. You can also make audio remixes on this audio mixing software; you can achieve this by rearranging the different tacks to fit various durations.

The many features available on this Mac audio mixer allow you to record and convert audio files into lossless WAV files. If you’re looking to run a radio station, you can do that with Adobe Audition by downloading your audio files to the server after mixing. In addition, you can convert your audio files into MP3 format to use on varying devices if necessary. One of its excellent features is processing and analyzing various audio files.

Adobe Audition also offers users diagnostic tools like DeHummer, DeClipper, diagnostic panel, and audio reduction to determine and fix issues on audio files. It is made for different purposes, as you can always count on this tool to provide you with crisp, quality sounds. In addition, you can visualize the edits on your audio file on this software in real-time.

Pros

• Offers varying mixing and editing features
• Users can import and export audio files in various formats
• It comes with a spectral display for restoring audio files
• Features diagnostic tools for fixing audio file issues
• Interactive and easy-to-use interface

Cons

• Limited free version

WavePad

Another impressive audio mixer with basic and advanced features that you should explore is WavePad. This software is excellent for audio editing, recordings, and music productions. The best part is that it supports the major audio formats and allows users to trim, cut, split, copy, equalize, and amplify audio tracks within a few seconds. WavePad also offers you several options to minimize noise and access advanced tools like TFFT, FFT, and spectral analysis that help you understand video frequencies better.

This audio mixer is excellent for streaming and offers voice-over features. The developers continually update WavePad, and if you have issues, the customer support options on the website allow you to get help immediately. If you like to edit lots of soundtracks and would like to save them as you edit, then you would enjoy the batch processing feature. This feature is ideal for busy producers who want to mix their audio quickly. This versatile tool isn’t just compatible with Mac and works on Chromebook, Windows, Android, and iOS devices.

Pros

• Allows batch processing
• Allows you to amplify and equalize sounds
• It comes with an intuitive user interface
• Excellent customer support options

Cons

• The free version is limited

TwistedWave

Another audio mixer for Mac that allows you to record, mix, master, convert and batch-process your audio is TwistedWave. This tool is an all-in-one solution for everything audio-related. The best part is that it comes with an intuitive interface that’s easy for anyone to use. TwistedWave works with Mac OS alone and is available at a premium price. If you want to master audio with inbuilt effects and make quick, effective edits to audio files, this is the tool for you. In addition, a responsive interface can process large audio files in the background.

Its vast features allow for the seamless mixing and editing of audio files. It features a smart silence detector that detects silences, removes them, and exports the remaining audio as individual files. The batch processor also comes with effects like AU and VST plugins. If you’re uncomfortable with the effects, you can create your effect stacks and then utilize them with just a click. TwistedWave isn’t a basic editor as it has advanced features like pitch shifting, professional time stretching, and multichannel editing. This audio mixing tool also supports up to 32-bit audio and is great if you want a professional and crisp audio output.

Pros

• It easily detects silence points for easy splitting
• Corrects pitch and speeds it up seamlessly
• You can work on present audio tracks while loading large files in the background
• You can create your custom audio stack
• Offers professional-grade plugins

Cons

• No free version
• It can be difficult for beginners to use

Logic Pro

Apple’s Logic Pro is an excellent audio mixer that you can utilize to carry out some professional editing and audio-producing activities. This audio mixer has impressive features like Sampler, Step Sequencer, Quick Sampler, and many more. These features help you build melodic patterns and drum beats. You can also use them to transform various sounds into instruments within a few seconds. So if your goal is to improve your music, Logic Pro makes it relatively easy.

You can also create new music using this tool and, in the process, play different music arrangements on a cell grid and identify the best sounds for you. You can also add the sounds to your timeline before you get started. With Logic Pro, you can add DJ-style effects to your audio file. You can also play any instrument and record clean and high-quality audio to add to your existing file. Logic Pro also allows you to add new music to your track without disturbing its tempo; you can also correct pitch with this tool.

Another tool from Logic Pro is the mountable sound card which allows up to 24-track recording. It also features unique digital effects. Some features it comes with include delay, chorus, ping-pong delay, reverb, and many more. Logic Pro supports several popular audio formats and also allows multi-tracking editing. There’s also a library of royalty-free songs you can explore with this tool.

Pros

• It helps you identify the best sounds
• Users can implement DJ-style effects on audio files
• It offers many impressive features
• Impressive recording features

Cons

• Too complex for beginners

Alternative Option: Wondershare Filmora

Wondershare Filmora is the best software to carry out different audio mixing activating. You can easily edit your audio to ensure a clean and crisp audio output. In addition, this tool offers excellent features like silence detection and auto-beat sync. Beyond this, it offers features like an auto montage maker, which evaluates your audio file and informs you of its best points. It is also useful for adding soundtracks to video files when necessary.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Wondershare Filmora allows you efficiently adjust pitch and speed. You can also minimize or increase the volume of your sound file or add sound fading in and out features to your audio file. The best part about this tool is that you can share the mix on social media after mixing and editing audio files. The steps to mix audio files using Wondershare Filmora are easy; check them out below.

Step1Download Wondershare Filmora from the official website and install it on your device following the installation guide.

Step2Launch the audio mixing software and choose ‘create new project’ on the homepage.

Step3Import media files by clicking on ‘import media files’ on the media menu.

Step4Choose the audio file you want to mix and click the ‘import media’ option. Alternatively, you can choose to drag and drop the audio file to the software’s timeline.

Step5Start editing your media file by clicking the ‘audio mixer’ option. It will provide various tools to mix and edit your audio file.

Step6click the master icon to decrease or increase audio volume. Once you’re done, hit the ‘OK’ button.

Step7After mixing, hit the ‘export’ button and choose the location you want to save your edited file. You can also choose to share directly on social media platforms.

Final Thoughts

Audio mixing and editing are sometimes essential to creating an excellent music track. However, finding an audio mixer for Mac can be difficult; we reviewed the 5 best audio mixers for Mac to provide you with options. With this list of best Mac audio mixers, you can transform your audio files into professional quality.

Adobe Audition

We all know that Adobe only offers excellent software, and you can expect nothing different from Adobe Audition. This is a great audio mixer for editing and polishing your audio, making it into an impeccable sound. It allows you clean, mixes, and fine-tune your sound file by offering a smooth workflow. In addition, Adobe Audition offers a spectral display and a crucial sound panel that helps you restore audio. This tool also helps users achieve a professional-level quality even if you’re a beginner with little to no audio-mixing experience. You can also make audio remixes on this audio mixing software; you can achieve this by rearranging the different tacks to fit various durations.

The many features available on this Mac audio mixer allow you to record and convert audio files into lossless WAV files. If you’re looking to run a radio station, you can do that with Adobe Audition by downloading your audio files to the server after mixing. In addition, you can convert your audio files into MP3 format to use on varying devices if necessary. One of its excellent features is processing and analyzing various audio files.

Adobe Audition also offers users diagnostic tools like DeHummer, DeClipper, diagnostic panel, and audio reduction to determine and fix issues on audio files. It is made for different purposes, as you can always count on this tool to provide you with crisp, quality sounds. In addition, you can visualize the edits on your audio file on this software in real-time.

Pros

• Offers varying mixing and editing features
• Users can import and export audio files in various formats
• It comes with a spectral display for restoring audio files
• Features diagnostic tools for fixing audio file issues
• Interactive and easy-to-use interface

Cons

• Limited free version

WavePad

Another impressive audio mixer with basic and advanced features that you should explore is WavePad. This software is excellent for audio editing, recordings, and music productions. The best part is that it supports the major audio formats and allows users to trim, cut, split, copy, equalize, and amplify audio tracks within a few seconds. WavePad also offers you several options to minimize noise and access advanced tools like TFFT, FFT, and spectral analysis that help you understand video frequencies better.

This audio mixer is excellent for streaming and offers voice-over features. The developers continually update WavePad, and if you have issues, the customer support options on the website allow you to get help immediately. If you like to edit lots of soundtracks and would like to save them as you edit, then you would enjoy the batch processing feature. This feature is ideal for busy producers who want to mix their audio quickly. This versatile tool isn’t just compatible with Mac and works on Chromebook, Windows, Android, and iOS devices.

Pros

• Allows batch processing
• Allows you to amplify and equalize sounds
• It comes with an intuitive user interface
• Excellent customer support options

Cons

• The free version is limited

TwistedWave

Another audio mixer for Mac that allows you to record, mix, master, convert and batch-process your audio is TwistedWave. This tool is an all-in-one solution for everything audio-related. The best part is that it comes with an intuitive interface that’s easy for anyone to use. TwistedWave works with Mac OS alone and is available at a premium price. If you want to master audio with inbuilt effects and make quick, effective edits to audio files, this is the tool for you. In addition, a responsive interface can process large audio files in the background.

Its vast features allow for the seamless mixing and editing of audio files. It features a smart silence detector that detects silences, removes them, and exports the remaining audio as individual files. The batch processor also comes with effects like AU and VST plugins. If you’re uncomfortable with the effects, you can create your effect stacks and then utilize them with just a click. TwistedWave isn’t a basic editor as it has advanced features like pitch shifting, professional time stretching, and multichannel editing. This audio mixing tool also supports up to 32-bit audio and is great if you want a professional and crisp audio output.

Pros

• It easily detects silence points for easy splitting
• Corrects pitch and speeds it up seamlessly
• You can work on present audio tracks while loading large files in the background
• You can create your custom audio stack
• Offers professional-grade plugins

Cons

• No free version
• It can be difficult for beginners to use

Logic Pro

Apple’s Logic Pro is an excellent audio mixer that you can utilize to carry out some professional editing and audio-producing activities. This audio mixer has impressive features like Sampler, Step Sequencer, Quick Sampler, and many more. These features help you build melodic patterns and drum beats. You can also use them to transform various sounds into instruments within a few seconds. So if your goal is to improve your music, Logic Pro makes it relatively easy.

You can also create new music using this tool and, in the process, play different music arrangements on a cell grid and identify the best sounds for you. You can also add the sounds to your timeline before you get started. With Logic Pro, you can add DJ-style effects to your audio file. You can also play any instrument and record clean and high-quality audio to add to your existing file. Logic Pro also allows you to add new music to your track without disturbing its tempo; you can also correct pitch with this tool.

Another tool from Logic Pro is the mountable sound card which allows up to 24-track recording. It also features unique digital effects. Some features it comes with include delay, chorus, ping-pong delay, reverb, and many more. Logic Pro supports several popular audio formats and also allows multi-tracking editing. There’s also a library of royalty-free songs you can explore with this tool.

Pros

• It helps you identify the best sounds
• Users can implement DJ-style effects on audio files
• It offers many impressive features
• Impressive recording features

Cons

• Too complex for beginners

Alternative Option: Wondershare Filmora

Wondershare Filmora is the best software to carry out different audio mixing activating. You can easily edit your audio to ensure a clean and crisp audio output. In addition, this tool offers excellent features like silence detection and auto-beat sync. Beyond this, it offers features like an auto montage maker, which evaluates your audio file and informs you of its best points. It is also useful for adding soundtracks to video files when necessary.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Wondershare Filmora allows you efficiently adjust pitch and speed. You can also minimize or increase the volume of your sound file or add sound fading in and out features to your audio file. The best part about this tool is that you can share the mix on social media after mixing and editing audio files. The steps to mix audio files using Wondershare Filmora are easy; check them out below.

Step1Download Wondershare Filmora from the official website and install it on your device following the installation guide.

Step2Launch the audio mixing software and choose ‘create new project’ on the homepage.

Step3Import media files by clicking on ‘import media files’ on the media menu.

Step4Choose the audio file you want to mix and click the ‘import media’ option. Alternatively, you can choose to drag and drop the audio file to the software’s timeline.

Step5Start editing your media file by clicking the ‘audio mixer’ option. It will provide various tools to mix and edit your audio file.

Step6click the master icon to decrease or increase audio volume. Once you’re done, hit the ‘OK’ button.

Step7After mixing, hit the ‘export’ button and choose the location you want to save your edited file. You can also choose to share directly on social media platforms.

Final Thoughts

Audio mixing and editing are sometimes essential to creating an excellent music track. However, finding an audio mixer for Mac can be difficult; we reviewed the 5 best audio mixers for Mac to provide you with options. With this list of best Mac audio mixers, you can transform your audio files into professional quality.

Also read: