Enhancing Audio Quality: Practical Methods to Eradicate Low-Frequency Rumble

Creating content can be fun most of the time. The shoot is perfect and the scenes are spotless. You are confident that you got everything right. But then, when you listen to the recording, you notice a continuous hissing sound. This takes you back as you have to decide to remove hiss from audio before editing the video. Luckily, several hiss removal approaches will work just fine. In this article, we take you through the audio cleanup process to help you with your hiss reduction efforts.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Enhancing Narratives: A Look at 3 Creative Audio Integration Strategies for Movies

The audio or music of video can dramatically affect our perception of a video – no matter whether it’s a home movie, a commercial, or a video presentation. But what if all you have is silent footage or with just a crackled and distorted audio file that needs to be replaced, and at this time, you want to add a sound to the video?

To solve this problem, I humbly recommend Wondershare Filmora . With it, you can easily add audio to video, record the voiceover directly and add it to video, or replace the original audio track (stream) with a new audio file.

In case you want to add music to video with some online tools, please leave a comment below so I can test some online solutions and share with you the best online tools to add audio to video free. I recommend Filmora because its requirement on the network isn’t so high compared to the online tools.

Below is a creative way of adding sound effects to video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

“Linux Audioscapes: Discover the 5 Leading Audio Recorders in Free Operating Systems”

The Linux operating system has its foundation everywhere. From cars to smartphones and home desktops to enterprise servers, Linux has got you covered. Android is powered by Linux and is considered the most reliable and secure system.

The article takes Linux audio recorders under consideration and covers their workability as well. Are you ready for it? The top five audio recorder Linux would be the crux of the article. So, let us initiate this!

In this article

01 5 Best Linux Audio Recorder in 2021

02 How Can I Record Audio on Linux?

Part 1: 5 Best Linux Audio Recorder in 2021

Are you a Linux user? Or are you a vocalist in the field? The sub-section is designed for you!

If you are not much of a technical person, finding the right Linux voice recorder would be a challenging task. A voiceover artist, musician, vocalist, and journalist all need a powerful audio recorder to be at the top of their game. Are you also one of them?

For this very reason, we have outlined five voice recorder Linux. There are key features alongside them to help make a fair decision. So, allow us to walk you through them! Let’s begin!

Audacity

Want to know how Audacity operates? Let us find out!

Audacity is an impeccable Linux sound recorder that is versatile and offers its services free of cost. Due to its flawless functionality, Audacity can be put to use for audio editing and production possibilities. It has a highly intuitive interface which is preferred by both amateurs and professionals in the field. You can easily connect the audio from an integrated or connected microphone.

Follow the features below that are provided by this cross-platform:

• You can perform subtle sound manipulations via advanced editing skills.
• The audio quality it supports comes in 16-bit, 24-bit, and 32-bit.
• Audacity offers plugin support of VST, LADSPA, and Nyquist.
• You can find its application in digitizing records, cassettes, and recording podcasts.

Ardour

The next sound recorder Linux on the list is Ardour that can be relied upon for audio recording and processing. Ardour handles all your work operations successfully. For instance, you can record audio from a bunch of different sources, cut and merge audio clips, and apply multiple effects to it. Ardour comes up with a non-destructive editing style which makes navigation effortless.

Impressed by it, right? The additional features presented by Ardour include:

• There are infinite audio track channels to make the process productive.
• The handy plugins enhance access to more features, such as a VST plugin.
• The import and export of videos are easy and require no background knowledge.
• It is a robust audio workstation in the field and is equally workable as Adobe Audition.

Ocenaudio

What are some traits of Ocenaudio? Time to have a peek!

Ocenaudio is yet another exceptional Linux audio recorder that understands all your professional needs. The user is free to fine-tune the audio files to tailor them according to the industry demands. The VST plugin allows you to insert various effects into the audio. The real-time preview of sounds helps decide regarding the changes done.

To know more about Ocenaudio and what it brings to the table, follow our lead.

• The multi-selection features allow you to choose the segments of the audio and process them in batches.
• The advanced memory management keeps the audio files ready to use without wasting the RAM.
• You can perform audio equalization and gain through Ocenaudio.
• It is perfect for beginners trying to make a career for themselves.

Audio Recorder

Are you willing to know the attributes of an Audio Recorder? Let us have a glance!

Audio Recorder is a phenomenal audio recorder Linux that comes up with all sorts of options to act as the audio source. For instance, you can use a microphone, webcam, and even Skype. The timing can be set for your audio recording so that you control the work environment. It supports MP3, FLAC, OGG, WAV, and SPX formats.

Want to know more about the tool? Audio Recorder brings more characteristics for its users. Let us have a look.

• Audio Recorder is one of the most stable audio recorder Linuxto date.
• It is free to use and presents an intuitive user interface.
• There is an advanced setup to record audio, even from a web browser.
• The recordings can be scheduled to record as per the user’s convenience.

LMMS

LMMS is a digital audio workstation that takes complete responsibility for your audio recording and editing requirements. Music composition has become possible and entirely workable with LMMS. Additionally, the Linux sound recordercomes up with customizable presets, effects, VSTs, and samples to begin the process.

LMMS is a perfect choice. Don’t you agree? It has the following traits:

• There are powerful editing features to accelerate the work speed.
• You can perform the note playback using the keyboard or MIDI input.
• The built-in audio manipulation is offered by LMMS.
• There are graphic and parametric analyzers for built-in visualization.

Part 2: How Can I Record Audio on Linux?

Linux is a powerful and reliable operating system. It is important to know how to install Audacity and PulseAudio to record the audio on Linux. Therefore, the sub-section of this write-up reflects upon the detailed step-by-step guide to do so. Let us not wait any longer and jump right in!

Installation of Audacity

Audacity comes in a wide variety of distros. Let us have a look at primary repositories.

Debian/Ubuntu/Ubuntu-based distro

sudo apt install audacity

Fedora sudo dnf install Audacity

OpenSuse sudo zypper install audacity

Arch Linux sudo pacman -S install Audacity

Snaps or Flatpaks flatpak install flathub org.audacityteam.Audacity

or sudo snap install audacity

Installation of PulseAudio Volume Control

PulseAudio Volume Control is a workable way to snag audio from songs, videos, and other media so that it can be used for a later date. You can access this application to record audio from the system in high quality. PulseAudio Volume Control is available in major repositories. To install them, use the following commands.

Debian/Ubuntu/Ubuntu-based distro

sudo apt install pavucontrol

For Fedora sudo dnf install pavucontrol

OpenSuse sudo zypper install pavucontrol

Arch Linux sudo pacman -S install pavucontrol

Flatpack flatpak install org.pulseaudio.pavucontrol

Recording Process Via Microphone

To record the sound using a microphone, connect it to the system. The hardware is automatically found, and recording can be initiated easily. The process is as simple as it can get. Following are the guidelines to get done with the process.

• For starters, launch Audacity from your Linux system.
• Tap on the “Red” record button and start recording immediately. There are no complications involved.

Moving on, let us recommend you an ultimate audio editor! Continue reading the article!

Closing Words

The article presented five renowned Linux audio recorders that work like a charm when it comes to audio recording and processing. The user can assess their key features with each other to make the right call. Moreover, the article covered the step-by-step guide to recording audio on Linux. It solves most of the problems, right?

Are you a Windows or a Mac user looking for an audio editor for your day-to-day operations? Stay put as Wondershare Filmora is here to make your life easy and bearable. The visual editing ability of Filmora has made its usability popular around the globe. Looking good, right?

You can lower the volume of your audio through the “Audio Ducking” functionality and use the “Audio Mixer” to fine-tune the audio into your projects. The “Audio Equalizer” performs a phenomenal role to enhance or minimize the loudness of an audio frequency. Additionally, one can count on “Audio Denoise” to eliminate the noise in the background by following a series of simple steps.

You can also fade in or fade out the audio while adjusting the audio speed. The users are expected to test these features to decide more confidently. Make the best out of your tasks with Wondershare Filmora.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 How Can I Record Audio on Linux?

Part 1: 5 Best Linux Audio Recorder in 2021

Are you a Linux user? Or are you a vocalist in the field? The sub-section is designed for you!

If you are not much of a technical person, finding the right Linux voice recorder would be a challenging task. A voiceover artist, musician, vocalist, and journalist all need a powerful audio recorder to be at the top of their game. Are you also one of them?

For this very reason, we have outlined five voice recorder Linux. There are key features alongside them to help make a fair decision. So, allow us to walk you through them! Let’s begin!

Audacity

Want to know how Audacity operates? Let us find out!

Audacity is an impeccable Linux sound recorder that is versatile and offers its services free of cost. Due to its flawless functionality, Audacity can be put to use for audio editing and production possibilities. It has a highly intuitive interface which is preferred by both amateurs and professionals in the field. You can easily connect the audio from an integrated or connected microphone.

Follow the features below that are provided by this cross-platform:

• You can perform subtle sound manipulations via advanced editing skills.
• The audio quality it supports comes in 16-bit, 24-bit, and 32-bit.
• Audacity offers plugin support of VST, LADSPA, and Nyquist.
• You can find its application in digitizing records, cassettes, and recording podcasts.

Ardour

The next sound recorder Linux on the list is Ardour that can be relied upon for audio recording and processing. Ardour handles all your work operations successfully. For instance, you can record audio from a bunch of different sources, cut and merge audio clips, and apply multiple effects to it. Ardour comes up with a non-destructive editing style which makes navigation effortless.

Impressed by it, right? The additional features presented by Ardour include:

• There are infinite audio track channels to make the process productive.
• The handy plugins enhance access to more features, such as a VST plugin.
• The import and export of videos are easy and require no background knowledge.
• It is a robust audio workstation in the field and is equally workable as Adobe Audition.

Ocenaudio

What are some traits of Ocenaudio? Time to have a peek!

Ocenaudio is yet another exceptional Linux audio recorder that understands all your professional needs. The user is free to fine-tune the audio files to tailor them according to the industry demands. The VST plugin allows you to insert various effects into the audio. The real-time preview of sounds helps decide regarding the changes done.

To know more about Ocenaudio and what it brings to the table, follow our lead.

• The multi-selection features allow you to choose the segments of the audio and process them in batches.
• The advanced memory management keeps the audio files ready to use without wasting the RAM.
• You can perform audio equalization and gain through Ocenaudio.
• It is perfect for beginners trying to make a career for themselves.

Audio Recorder

Are you willing to know the attributes of an Audio Recorder? Let us have a glance!

Audio Recorder is a phenomenal audio recorder Linux that comes up with all sorts of options to act as the audio source. For instance, you can use a microphone, webcam, and even Skype. The timing can be set for your audio recording so that you control the work environment. It supports MP3, FLAC, OGG, WAV, and SPX formats.

Want to know more about the tool? Audio Recorder brings more characteristics for its users. Let us have a look.

• Audio Recorder is one of the most stable audio recorder Linuxto date.
• It is free to use and presents an intuitive user interface.
• There is an advanced setup to record audio, even from a web browser.
• The recordings can be scheduled to record as per the user’s convenience.

LMMS

LMMS is a digital audio workstation that takes complete responsibility for your audio recording and editing requirements. Music composition has become possible and entirely workable with LMMS. Additionally, the Linux sound recordercomes up with customizable presets, effects, VSTs, and samples to begin the process.

LMMS is a perfect choice. Don’t you agree? It has the following traits:

• There are powerful editing features to accelerate the work speed.
• You can perform the note playback using the keyboard or MIDI input.
• The built-in audio manipulation is offered by LMMS.
• There are graphic and parametric analyzers for built-in visualization.

Part 2: How Can I Record Audio on Linux?

Linux is a powerful and reliable operating system. It is important to know how to install Audacity and PulseAudio to record the audio on Linux. Therefore, the sub-section of this write-up reflects upon the detailed step-by-step guide to do so. Let us not wait any longer and jump right in!

Installation of Audacity

Audacity comes in a wide variety of distros. Let us have a look at primary repositories.

Debian/Ubuntu/Ubuntu-based distro

sudo apt install audacity

Fedora sudo dnf install Audacity

OpenSuse sudo zypper install audacity

Arch Linux sudo pacman -S install Audacity

Snaps or Flatpaks flatpak install flathub org.audacityteam.Audacity

or sudo snap install audacity

Installation of PulseAudio Volume Control

PulseAudio Volume Control is a workable way to snag audio from songs, videos, and other media so that it can be used for a later date. You can access this application to record audio from the system in high quality. PulseAudio Volume Control is available in major repositories. To install them, use the following commands.

Debian/Ubuntu/Ubuntu-based distro

sudo apt install pavucontrol

For Fedora sudo dnf install pavucontrol

OpenSuse sudo zypper install pavucontrol

Arch Linux sudo pacman -S install pavucontrol

Flatpack flatpak install org.pulseaudio.pavucontrol

Recording Process Via Microphone

To record the sound using a microphone, connect it to the system. The hardware is automatically found, and recording can be initiated easily. The process is as simple as it can get. Following are the guidelines to get done with the process.

• For starters, launch Audacity from your Linux system.
• Tap on the “Red” record button and start recording immediately. There are no complications involved.

Moving on, let us recommend you an ultimate audio editor! Continue reading the article!

Closing Words

The article presented five renowned Linux audio recorders that work like a charm when it comes to audio recording and processing. The user can assess their key features with each other to make the right call. Moreover, the article covered the step-by-step guide to recording audio on Linux. It solves most of the problems, right?

Are you a Windows or a Mac user looking for an audio editor for your day-to-day operations? Stay put as Wondershare Filmora is here to make your life easy and bearable. The visual editing ability of Filmora has made its usability popular around the globe. Looking good, right?

You can lower the volume of your audio through the “Audio Ducking” functionality and use the “Audio Mixer” to fine-tune the audio into your projects. The “Audio Equalizer” performs a phenomenal role to enhance or minimize the loudness of an audio frequency. Additionally, one can count on “Audio Denoise” to eliminate the noise in the background by following a series of simple steps.

You can also fade in or fade out the audio while adjusting the audio speed. The users are expected to test these features to decide more confidently. Make the best out of your tasks with Wondershare Filmora.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 How Can I Record Audio on Linux?

Part 1: 5 Best Linux Audio Recorder in 2021

Are you a Linux user? Or are you a vocalist in the field? The sub-section is designed for you!

If you are not much of a technical person, finding the right Linux voice recorder would be a challenging task. A voiceover artist, musician, vocalist, and journalist all need a powerful audio recorder to be at the top of their game. Are you also one of them?

For this very reason, we have outlined five voice recorder Linux. There are key features alongside them to help make a fair decision. So, allow us to walk you through them! Let’s begin!

Audacity

Want to know how Audacity operates? Let us find out!

Audacity is an impeccable Linux sound recorder that is versatile and offers its services free of cost. Due to its flawless functionality, Audacity can be put to use for audio editing and production possibilities. It has a highly intuitive interface which is preferred by both amateurs and professionals in the field. You can easily connect the audio from an integrated or connected microphone.

Follow the features below that are provided by this cross-platform:

• You can perform subtle sound manipulations via advanced editing skills.
• The audio quality it supports comes in 16-bit, 24-bit, and 32-bit.
• Audacity offers plugin support of VST, LADSPA, and Nyquist.
• You can find its application in digitizing records, cassettes, and recording podcasts.

Ardour

The next sound recorder Linux on the list is Ardour that can be relied upon for audio recording and processing. Ardour handles all your work operations successfully. For instance, you can record audio from a bunch of different sources, cut and merge audio clips, and apply multiple effects to it. Ardour comes up with a non-destructive editing style which makes navigation effortless.

Impressed by it, right? The additional features presented by Ardour include:

• There are infinite audio track channels to make the process productive.
• The handy plugins enhance access to more features, such as a VST plugin.
• The import and export of videos are easy and require no background knowledge.
• It is a robust audio workstation in the field and is equally workable as Adobe Audition.

Ocenaudio

What are some traits of Ocenaudio? Time to have a peek!

Ocenaudio is yet another exceptional Linux audio recorder that understands all your professional needs. The user is free to fine-tune the audio files to tailor them according to the industry demands. The VST plugin allows you to insert various effects into the audio. The real-time preview of sounds helps decide regarding the changes done.

To know more about Ocenaudio and what it brings to the table, follow our lead.

• The multi-selection features allow you to choose the segments of the audio and process them in batches.
• The advanced memory management keeps the audio files ready to use without wasting the RAM.
• You can perform audio equalization and gain through Ocenaudio.
• It is perfect for beginners trying to make a career for themselves.

Audio Recorder

Are you willing to know the attributes of an Audio Recorder? Let us have a glance!

Audio Recorder is a phenomenal audio recorder Linux that comes up with all sorts of options to act as the audio source. For instance, you can use a microphone, webcam, and even Skype. The timing can be set for your audio recording so that you control the work environment. It supports MP3, FLAC, OGG, WAV, and SPX formats.

Want to know more about the tool? Audio Recorder brings more characteristics for its users. Let us have a look.

• Audio Recorder is one of the most stable audio recorder Linuxto date.
• It is free to use and presents an intuitive user interface.
• There is an advanced setup to record audio, even from a web browser.
• The recordings can be scheduled to record as per the user’s convenience.

LMMS

LMMS is a digital audio workstation that takes complete responsibility for your audio recording and editing requirements. Music composition has become possible and entirely workable with LMMS. Additionally, the Linux sound recordercomes up with customizable presets, effects, VSTs, and samples to begin the process.

LMMS is a perfect choice. Don’t you agree? It has the following traits:

• There are powerful editing features to accelerate the work speed.
• You can perform the note playback using the keyboard or MIDI input.
• The built-in audio manipulation is offered by LMMS.
• There are graphic and parametric analyzers for built-in visualization.

Part 2: How Can I Record Audio on Linux?

Linux is a powerful and reliable operating system. It is important to know how to install Audacity and PulseAudio to record the audio on Linux. Therefore, the sub-section of this write-up reflects upon the detailed step-by-step guide to do so. Let us not wait any longer and jump right in!

Installation of Audacity

Audacity comes in a wide variety of distros. Let us have a look at primary repositories.

Debian/Ubuntu/Ubuntu-based distro

sudo apt install audacity

Fedora sudo dnf install Audacity

OpenSuse sudo zypper install audacity

Arch Linux sudo pacman -S install Audacity

Snaps or Flatpaks flatpak install flathub org.audacityteam.Audacity

or sudo snap install audacity

Installation of PulseAudio Volume Control

PulseAudio Volume Control is a workable way to snag audio from songs, videos, and other media so that it can be used for a later date. You can access this application to record audio from the system in high quality. PulseAudio Volume Control is available in major repositories. To install them, use the following commands.

Debian/Ubuntu/Ubuntu-based distro

sudo apt install pavucontrol

For Fedora sudo dnf install pavucontrol

OpenSuse sudo zypper install pavucontrol

Arch Linux sudo pacman -S install pavucontrol

Flatpack flatpak install org.pulseaudio.pavucontrol

Recording Process Via Microphone

To record the sound using a microphone, connect it to the system. The hardware is automatically found, and recording can be initiated easily. The process is as simple as it can get. Following are the guidelines to get done with the process.

• For starters, launch Audacity from your Linux system.
• Tap on the “Red” record button and start recording immediately. There are no complications involved.

Moving on, let us recommend you an ultimate audio editor! Continue reading the article!

Closing Words

The article presented five renowned Linux audio recorders that work like a charm when it comes to audio recording and processing. The user can assess their key features with each other to make the right call. Moreover, the article covered the step-by-step guide to recording audio on Linux. It solves most of the problems, right?

Are you a Windows or a Mac user looking for an audio editor for your day-to-day operations? Stay put as Wondershare Filmora is here to make your life easy and bearable. The visual editing ability of Filmora has made its usability popular around the globe. Looking good, right?

You can lower the volume of your audio through the “Audio Ducking” functionality and use the “Audio Mixer” to fine-tune the audio into your projects. The “Audio Equalizer” performs a phenomenal role to enhance or minimize the loudness of an audio frequency. Additionally, one can count on “Audio Denoise” to eliminate the noise in the background by following a series of simple steps.

You can also fade in or fade out the audio while adjusting the audio speed. The users are expected to test these features to decide more confidently. Make the best out of your tasks with Wondershare Filmora.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 How Can I Record Audio on Linux?

Part 1: 5 Best Linux Audio Recorder in 2021

Are you a Linux user? Or are you a vocalist in the field? The sub-section is designed for you!

If you are not much of a technical person, finding the right Linux voice recorder would be a challenging task. A voiceover artist, musician, vocalist, and journalist all need a powerful audio recorder to be at the top of their game. Are you also one of them?

For this very reason, we have outlined five voice recorder Linux. There are key features alongside them to help make a fair decision. So, allow us to walk you through them! Let’s begin!

Audacity

Want to know how Audacity operates? Let us find out!

Audacity is an impeccable Linux sound recorder that is versatile and offers its services free of cost. Due to its flawless functionality, Audacity can be put to use for audio editing and production possibilities. It has a highly intuitive interface which is preferred by both amateurs and professionals in the field. You can easily connect the audio from an integrated or connected microphone.

Follow the features below that are provided by this cross-platform:

• You can perform subtle sound manipulations via advanced editing skills.
• The audio quality it supports comes in 16-bit, 24-bit, and 32-bit.
• Audacity offers plugin support of VST, LADSPA, and Nyquist.
• You can find its application in digitizing records, cassettes, and recording podcasts.

Ardour

The next sound recorder Linux on the list is Ardour that can be relied upon for audio recording and processing. Ardour handles all your work operations successfully. For instance, you can record audio from a bunch of different sources, cut and merge audio clips, and apply multiple effects to it. Ardour comes up with a non-destructive editing style which makes navigation effortless.

Impressed by it, right? The additional features presented by Ardour include:

• There are infinite audio track channels to make the process productive.
• The handy plugins enhance access to more features, such as a VST plugin.
• The import and export of videos are easy and require no background knowledge.
• It is a robust audio workstation in the field and is equally workable as Adobe Audition.

Ocenaudio

What are some traits of Ocenaudio? Time to have a peek!

Ocenaudio is yet another exceptional Linux audio recorder that understands all your professional needs. The user is free to fine-tune the audio files to tailor them according to the industry demands. The VST plugin allows you to insert various effects into the audio. The real-time preview of sounds helps decide regarding the changes done.

To know more about Ocenaudio and what it brings to the table, follow our lead.

• The multi-selection features allow you to choose the segments of the audio and process them in batches.
• The advanced memory management keeps the audio files ready to use without wasting the RAM.
• You can perform audio equalization and gain through Ocenaudio.
• It is perfect for beginners trying to make a career for themselves.

Audio Recorder

Are you willing to know the attributes of an Audio Recorder? Let us have a glance!

Audio Recorder is a phenomenal audio recorder Linux that comes up with all sorts of options to act as the audio source. For instance, you can use a microphone, webcam, and even Skype. The timing can be set for your audio recording so that you control the work environment. It supports MP3, FLAC, OGG, WAV, and SPX formats.

Want to know more about the tool? Audio Recorder brings more characteristics for its users. Let us have a look.

• Audio Recorder is one of the most stable audio recorder Linuxto date.
• It is free to use and presents an intuitive user interface.
• There is an advanced setup to record audio, even from a web browser.
• The recordings can be scheduled to record as per the user’s convenience.

LMMS

LMMS is a digital audio workstation that takes complete responsibility for your audio recording and editing requirements. Music composition has become possible and entirely workable with LMMS. Additionally, the Linux sound recordercomes up with customizable presets, effects, VSTs, and samples to begin the process.

LMMS is a perfect choice. Don’t you agree? It has the following traits:

• There are powerful editing features to accelerate the work speed.
• You can perform the note playback using the keyboard or MIDI input.
• The built-in audio manipulation is offered by LMMS.
• There are graphic and parametric analyzers for built-in visualization.

Part 2: How Can I Record Audio on Linux?

Linux is a powerful and reliable operating system. It is important to know how to install Audacity and PulseAudio to record the audio on Linux. Therefore, the sub-section of this write-up reflects upon the detailed step-by-step guide to do so. Let us not wait any longer and jump right in!

Installation of Audacity

Audacity comes in a wide variety of distros. Let us have a look at primary repositories.

Debian/Ubuntu/Ubuntu-based distro

sudo apt install audacity

Fedora sudo dnf install Audacity

OpenSuse sudo zypper install audacity

Arch Linux sudo pacman -S install Audacity

Snaps or Flatpaks flatpak install flathub org.audacityteam.Audacity

or sudo snap install audacity

Installation of PulseAudio Volume Control

PulseAudio Volume Control is a workable way to snag audio from songs, videos, and other media so that it can be used for a later date. You can access this application to record audio from the system in high quality. PulseAudio Volume Control is available in major repositories. To install them, use the following commands.

Debian/Ubuntu/Ubuntu-based distro

sudo apt install pavucontrol

For Fedora sudo dnf install pavucontrol

OpenSuse sudo zypper install pavucontrol

Arch Linux sudo pacman -S install pavucontrol

Flatpack flatpak install org.pulseaudio.pavucontrol

Recording Process Via Microphone

To record the sound using a microphone, connect it to the system. The hardware is automatically found, and recording can be initiated easily. The process is as simple as it can get. Following are the guidelines to get done with the process.

• For starters, launch Audacity from your Linux system.
• Tap on the “Red” record button and start recording immediately. There are no complications involved.

Moving on, let us recommend you an ultimate audio editor! Continue reading the article!

Closing Words

The article presented five renowned Linux audio recorders that work like a charm when it comes to audio recording and processing. The user can assess their key features with each other to make the right call. Moreover, the article covered the step-by-step guide to recording audio on Linux. It solves most of the problems, right?

Are you a Windows or a Mac user looking for an audio editor for your day-to-day operations? Stay put as Wondershare Filmora is here to make your life easy and bearable. The visual editing ability of Filmora has made its usability popular around the globe. Looking good, right?

You can lower the volume of your audio through the “Audio Ducking” functionality and use the “Audio Mixer” to fine-tune the audio into your projects. The “Audio Equalizer” performs a phenomenal role to enhance or minimize the loudness of an audio frequency. Additionally, one can count on “Audio Denoise” to eliminate the noise in the background by following a series of simple steps.

You can also fade in or fade out the audio while adjusting the audio speed. The users are expected to test these features to decide more confidently. Make the best out of your tasks with Wondershare Filmora.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Also read: