“Critical Picks: The 5 Most Accessible Harmonics Adjuster Tools”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Exploring the Impactful Fusion of Audio Elements in Visual Storytelling

Almost everyone shoots videos and photos now. But sometimes, it’s hard to record videos while boring to capture images. What if a hybrid mingles still images with an audio file? You can add audio to photo easily.

Images with a soundtrack are simpler to create and more interactive than video; they naturally improve the project without time commitment or complexity. The question that appears is; how to add audio to a photo/image and create great multimedia photography?

In this post, we will describe and clear all your queries on how to add audio to photo. Whether you wish to combine audio and image on the computer or add audio to iPhone pictures, you can all find the answer.

In this article

01 [Can I add audio to the photo?](#Part 1)

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

The Best Digital Voice Alteration Applications of the Future

Nowadays, as video becomes more and more critical in content spreading, people like to make videos to share their lives and feelings. Voice changing can add more fun while making videos, and to switch your tune and gender to match the video theme and scene. Meanwhile, voice changing can be used in podcasts, live shows, video dubbing, and more, creating more lively characters to attract more listeners.

The article will solely focus on talking about the best voice changer software. We are about to share the best 11 voice changers with you. With these, you can change the pitch and tone of your voice.

In this article

Part 1 6 Best Voice Changer for PC

Part 2 5 Best Voice Changer App for Mobile [Android/iOS]

Part 1: 6 Best Voice Changer for PC

Are you ready to learn about voice-changing software? First of all, we will start with voice changers that are best for PC.

1 - Filmora Voice Changer	2 - Voxal Voice Changer
3 - VoiceMod	4 - MorphVOX PRO
5 - All-in-One Voice Changer	6 - Murf

1. Filmora Voice Changer

Filmora Voice Changer - the best voice changer for pc, offers 3 ways to change your voice with ease - tune up and down, change the audio equalizer, and apply voice effects. Watch the video below to find out how to change voice in professional results.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

Plus, it also is a comprehensive tool for editing video and audio. Filmora owns multiple AI tools for saving your time in video and audio creating, AI denoise, STT, TTS, silence detection, etc. Get more fun through Filmora!

Key Features:

• Offers various built-in templates and effects for making videos.
• User-friendly with AI creation.
• Auto reframe to match different ratios of popular social media.

2. Voxal Voice Changer

Voxal Voice Changer is a powerful, real-time professional voice changer. The software is simple but has crazy features. With Voxal Voice changer, you can alter, camouflage, and also change your voice. Importantly, the software consumes minimum CPU space. Moreover, the voice changer is compatible with a lot of applications and games.

Voxal Voice Changer offers a variety of different sound effects. The software is famous because it changes live voice and it is real-time.

Key Features:

• The software is very convenient to use because of its responsive and easy-to-understand interface. Even beginners can use it.
• Voxal Voice Changer converts your voice to a wide range of sounds. You can select between different options, including cartoons characters, women, aliens, etc.
• Moreover, if you want personalized sound effects, then the software has a wide range to offer.

3. VoiceMod

Do you know about the best voice changer? Well, VoiceMod is the answer. The software can add real-time voice effects. It supports various programs like Skype, TeamSpeak, Discord, and others. Moreover, VoiceMod extends its support to various games, including Minecraft, Fortnite, League of Legends, etc.

VoiceMod is compatible with Windows Operating System. The software has a wide spectrum of voice effects that include Chipmunk, baby, alien, etc.

Key Features:

• The software is compatible with other powerful software—for instance, Audacity, Omegle, Twitch, Elgato Stream Deck.
• With VoiceMod, you can add cool sound effects and surprise your friends in any chatting or video chat application.
• The voice changer has a massive sound effect library to select from.

Best Voice Altering Software

Convert voice to another voice by using different ways. Customize and re-edit audio with powerful audio and video editor!

Try Voice Changer Software Try Voice Changer Software

Learn More >>

Try It Free >>

4. MorphVOX Pro

Do you know any software that allows noise cancellation? Let us tell you that MorphVOX PRO can do that. The software has so much to offer. For instance, you can enhance sound quality with this sound changer. With MorphVOX Pro, you can change your voice. You can sound exactly like your character in a game.

Key Features:

• MorphVOX Pro has a noise cancellation feature. You can use it to get an ultra-quiet background.
• The software has a wide range of audio effects to offer you. It lets you select from a high-quality array of audio effects.
• This voice changer is powerful and intuitive. Along with that, the sound effects are dispatched with quick keys.

5. All-in-One Voice Changer

All-in-One Voice Changer is free voice-changing software and is easily accessible. Moreover, the software is designed with multiple platforms. Every platform offers various voice options that you can select and alter with. All-in-One Voice Changer works well with Skype.

Key Features:

• The fascinating thing about this software is its ease. You can understand, handle and work with the software without facing any trouble.
• All-in-One Voice Changer allows its users to run and review the test recordings.
• With this software, you can communicate on Skype with the correct pitch and tone.

6. Murf

Murf is software that works like a professional voice changer. This is powerful enough to convert your ordinary voiceover from house recording to something that sounds like recorded in a professional studio. With Murf, you don’t need any recording equipment. The software allows you to transcribe and also edit the voice recording.

Key Features:

• The sound changer Murf software uses AI (Artificial Intelligence) technology. With this technology, the software creates high-quality voiceovers.
• Do you want to sound like someone else? With Murf, you can sound like 100+ different voices.
• You can set your voice with this software. Play with the settings. You can adjust the emphasis, speed, and also pitch of your voice.

Filmora Voice Changer

Best Voice Dhanger for PC

Easily change your voice from your sound to another person’s sound, as well as get more funny sound effects.

Best Voice Changing Software Best Voice Changing Software Learn More >

Try It Free >>

Part 2: 5 Best Voice Changer App for Mobile [Android/iOS]

Whenever a tool or application is designed and developed, it is kept in mind that there are two entirely different operating systems. Some people use Android devices, whereas others use iOS devices. In this section, we will talk about the best sound changers for both Android and iOS. So, let’s begin.

1 - RoboVox	2 - MagicCall
3 - Voice Changer Plus	4 - Snapchat
5 - VoiceFX

1. RoboVox

A wonderful voice changer application for Android and iOS devices is RoboVox . The application is famous because it converts voice into scary, funny, and robotic sounds. RoboVox has 32 different voice styles that you can select from. You can even play with the modulation settings and also with the pitch.

RoboVox has various inbuilt tools. They help the user to record and change the voice into multiple forms. The application has easy usage as you can easily transform your voice.

Key Features:

• RoboVox allows social sharing. After you have saved the recording, you can share it directly with your SoundCloud.
• The application offers 3 different modes. These are Real-time, Parrot, and also Recording mode.
• You can either save your creation or email it in WAV format. You can also set the transformed voice as your ringtone.

2. MagicCall

Are you looking for a good voice changer to prank your friends? MagicCall can help you with this. The fascinating thing about this voice changer is that you can use it during a call. With this application, change your voice in real-time on a call. With MagicCall, you can also record your calls and share them later.

Key Features:

• The application is the best male-to-female voice changer and vice versa. You can sound like a female, male, and also a cartoon with this.
• The application is the cheapest way to change your voice. You can switch between different voices. Also, enjoy playing sound emoticons during a call.
• What most people don’t know is that you get free credit on first-time registration.

3. Voice Changer Plus

Ready to learn about something where you can add voice filters? Voice Changer Plus lets you do that. With this iOS application, you can easily share all your recordings. An interesting thing, you share for free. Voice Changer Plus offers dozens of sound effects and different voices to choose from.

Key Features:

• The application has 55 distinct and unique voice effects, and a variety of background sounds that you can work with.
• Voice Changer Plus allows you to have Trim control. Along with that, the application fully supports voiceover.
• One interesting thing that should not be skipped is that you can layer more effects on any of your saved recordings.

4. Snapchat

A very famous application for both Android and iOS users is Snapchat . The application has a straightforward and simple voice modulation process. Snapchat offers hundreds of video filters. Along with that, a broad spectrum of voice filters is also found on Snapchat. The fun-filled application also allows messaging.

Key Features:

• With Snapchat, you can find like-minded people. Make new friends and prank them by using this sound changer.
• The application offers a wide variety of sound filters. Moreover, the filters and lenses are updated daily.
• You can make fun stories with Snapchat and share them. You can also discover new and original shows with this app.

5. VoiceFX

Do you know any sound changer that streams your transformed voice to media players or web browsers? Well, VoiceFX can do this. With this Android application, you can stream live your changed voice. VoiceFX also lets you modulate any of your pre-recorded audio files. The application allows you to export files in MP3 format.

Key Features:

• With VoiceFX, apply various voice effects to your voice in real-time. Also, it offers live streaming.
• You can change your voice to different styles. For instance, the available styles are Autotune, Female, Male, Robot, Chipmunk, etc.
• An amazing thing about VoiceFX is that you can use the changed voice and set it as a notification or phone ringtone.

Bottom Line

Voice Changing Software is very useful now a day. The fact that internet is full of different tools and software, you might get confused while selecting the best voice changer. For this reason, we are here to help you. The article has discussed the 11 best voice changer software for both PC and mobile. After reading this, all your confusion will vanish.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

Part 2 5 Best Voice Changer App for Mobile [Android/iOS]

Part 1: 6 Best Voice Changer for PC

Are you ready to learn about voice-changing software? First of all, we will start with voice changers that are best for PC.

1 - Filmora Voice Changer	2 - Voxal Voice Changer
3 - VoiceMod	4 - MorphVOX PRO
5 - All-in-One Voice Changer	6 - Murf

1. Filmora Voice Changer

Filmora Voice Changer - the best voice changer for pc, offers 3 ways to change your voice with ease - tune up and down, change the audio equalizer, and apply voice effects. Watch the video below to find out how to change voice in professional results.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

Plus, it also is a comprehensive tool for editing video and audio. Filmora owns multiple AI tools for saving your time in video and audio creating, AI denoise, STT, TTS, silence detection, etc. Get more fun through Filmora!

Key Features:

• Offers various built-in templates and effects for making videos.
• User-friendly with AI creation.
• Auto reframe to match different ratios of popular social media.

2. Voxal Voice Changer

Voxal Voice Changer is a powerful, real-time professional voice changer. The software is simple but has crazy features. With Voxal Voice changer, you can alter, camouflage, and also change your voice. Importantly, the software consumes minimum CPU space. Moreover, the voice changer is compatible with a lot of applications and games.

Voxal Voice Changer offers a variety of different sound effects. The software is famous because it changes live voice and it is real-time.

Key Features:

• The software is very convenient to use because of its responsive and easy-to-understand interface. Even beginners can use it.
• Voxal Voice Changer converts your voice to a wide range of sounds. You can select between different options, including cartoons characters, women, aliens, etc.
• Moreover, if you want personalized sound effects, then the software has a wide range to offer.

3. VoiceMod

Do you know about the best voice changer? Well, VoiceMod is the answer. The software can add real-time voice effects. It supports various programs like Skype, TeamSpeak, Discord, and others. Moreover, VoiceMod extends its support to various games, including Minecraft, Fortnite, League of Legends, etc.

VoiceMod is compatible with Windows Operating System. The software has a wide spectrum of voice effects that include Chipmunk, baby, alien, etc.

Key Features:

• The software is compatible with other powerful software—for instance, Audacity, Omegle, Twitch, Elgato Stream Deck.
• With VoiceMod, you can add cool sound effects and surprise your friends in any chatting or video chat application.
• The voice changer has a massive sound effect library to select from.

Best Voice Altering Software

Convert voice to another voice by using different ways. Customize and re-edit audio with powerful audio and video editor!

Try Voice Changer Software Try Voice Changer Software

Learn More >>

Try It Free >>

4. MorphVOX Pro

Do you know any software that allows noise cancellation? Let us tell you that MorphVOX PRO can do that. The software has so much to offer. For instance, you can enhance sound quality with this sound changer. With MorphVOX Pro, you can change your voice. You can sound exactly like your character in a game.

Key Features:

• MorphVOX Pro has a noise cancellation feature. You can use it to get an ultra-quiet background.
• The software has a wide range of audio effects to offer you. It lets you select from a high-quality array of audio effects.
• This voice changer is powerful and intuitive. Along with that, the sound effects are dispatched with quick keys.

5. All-in-One Voice Changer

All-in-One Voice Changer is free voice-changing software and is easily accessible. Moreover, the software is designed with multiple platforms. Every platform offers various voice options that you can select and alter with. All-in-One Voice Changer works well with Skype.

Key Features:

• The fascinating thing about this software is its ease. You can understand, handle and work with the software without facing any trouble.
• All-in-One Voice Changer allows its users to run and review the test recordings.
• With this software, you can communicate on Skype with the correct pitch and tone.

6. Murf

Murf is software that works like a professional voice changer. This is powerful enough to convert your ordinary voiceover from house recording to something that sounds like recorded in a professional studio. With Murf, you don’t need any recording equipment. The software allows you to transcribe and also edit the voice recording.

Key Features:

• The sound changer Murf software uses AI (Artificial Intelligence) technology. With this technology, the software creates high-quality voiceovers.
• Do you want to sound like someone else? With Murf, you can sound like 100+ different voices.
• You can set your voice with this software. Play with the settings. You can adjust the emphasis, speed, and also pitch of your voice.

Filmora Voice Changer

Best Voice Dhanger for PC

Easily change your voice from your sound to another person’s sound, as well as get more funny sound effects.

Best Voice Changing Software Best Voice Changing Software Learn More >

Try It Free >>

Part 2: 5 Best Voice Changer App for Mobile [Android/iOS]

Whenever a tool or application is designed and developed, it is kept in mind that there are two entirely different operating systems. Some people use Android devices, whereas others use iOS devices. In this section, we will talk about the best sound changers for both Android and iOS. So, let’s begin.

1 - RoboVox	2 - MagicCall
3 - Voice Changer Plus	4 - Snapchat
5 - VoiceFX

1. RoboVox

A wonderful voice changer application for Android and iOS devices is RoboVox . The application is famous because it converts voice into scary, funny, and robotic sounds. RoboVox has 32 different voice styles that you can select from. You can even play with the modulation settings and also with the pitch.

RoboVox has various inbuilt tools. They help the user to record and change the voice into multiple forms. The application has easy usage as you can easily transform your voice.

Key Features:

• RoboVox allows social sharing. After you have saved the recording, you can share it directly with your SoundCloud.
• The application offers 3 different modes. These are Real-time, Parrot, and also Recording mode.
• You can either save your creation or email it in WAV format. You can also set the transformed voice as your ringtone.

2. MagicCall

Are you looking for a good voice changer to prank your friends? MagicCall can help you with this. The fascinating thing about this voice changer is that you can use it during a call. With this application, change your voice in real-time on a call. With MagicCall, you can also record your calls and share them later.

Key Features:

• The application is the best male-to-female voice changer and vice versa. You can sound like a female, male, and also a cartoon with this.
• The application is the cheapest way to change your voice. You can switch between different voices. Also, enjoy playing sound emoticons during a call.
• What most people don’t know is that you get free credit on first-time registration.

3. Voice Changer Plus

Ready to learn about something where you can add voice filters? Voice Changer Plus lets you do that. With this iOS application, you can easily share all your recordings. An interesting thing, you share for free. Voice Changer Plus offers dozens of sound effects and different voices to choose from.

Key Features:

• The application has 55 distinct and unique voice effects, and a variety of background sounds that you can work with.
• Voice Changer Plus allows you to have Trim control. Along with that, the application fully supports voiceover.
• One interesting thing that should not be skipped is that you can layer more effects on any of your saved recordings.

4. Snapchat

A very famous application for both Android and iOS users is Snapchat . The application has a straightforward and simple voice modulation process. Snapchat offers hundreds of video filters. Along with that, a broad spectrum of voice filters is also found on Snapchat. The fun-filled application also allows messaging.

Key Features:

• With Snapchat, you can find like-minded people. Make new friends and prank them by using this sound changer.
• The application offers a wide variety of sound filters. Moreover, the filters and lenses are updated daily.
• You can make fun stories with Snapchat and share them. You can also discover new and original shows with this app.

5. VoiceFX

Do you know any sound changer that streams your transformed voice to media players or web browsers? Well, VoiceFX can do this. With this Android application, you can stream live your changed voice. VoiceFX also lets you modulate any of your pre-recorded audio files. The application allows you to export files in MP3 format.

Key Features:

• With VoiceFX, apply various voice effects to your voice in real-time. Also, it offers live streaming.
• You can change your voice to different styles. For instance, the available styles are Autotune, Female, Male, Robot, Chipmunk, etc.
• An amazing thing about VoiceFX is that you can use the changed voice and set it as a notification or phone ringtone.

Bottom Line

Voice Changing Software is very useful now a day. The fact that internet is full of different tools and software, you might get confused while selecting the best voice changer. For this reason, we are here to help you. The article has discussed the 11 best voice changer software for both PC and mobile. After reading this, all your confusion will vanish.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

Part 2 5 Best Voice Changer App for Mobile [Android/iOS]

Part 1: 6 Best Voice Changer for PC

Are you ready to learn about voice-changing software? First of all, we will start with voice changers that are best for PC.

1 - Filmora Voice Changer	2 - Voxal Voice Changer
3 - VoiceMod	4 - MorphVOX PRO
5 - All-in-One Voice Changer	6 - Murf

1. Filmora Voice Changer

Filmora Voice Changer - the best voice changer for pc, offers 3 ways to change your voice with ease - tune up and down, change the audio equalizer, and apply voice effects. Watch the video below to find out how to change voice in professional results.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

Plus, it also is a comprehensive tool for editing video and audio. Filmora owns multiple AI tools for saving your time in video and audio creating, AI denoise, STT, TTS, silence detection, etc. Get more fun through Filmora!

Key Features:

• Offers various built-in templates and effects for making videos.
• User-friendly with AI creation.
• Auto reframe to match different ratios of popular social media.

2. Voxal Voice Changer

Voxal Voice Changer is a powerful, real-time professional voice changer. The software is simple but has crazy features. With Voxal Voice changer, you can alter, camouflage, and also change your voice. Importantly, the software consumes minimum CPU space. Moreover, the voice changer is compatible with a lot of applications and games.

Voxal Voice Changer offers a variety of different sound effects. The software is famous because it changes live voice and it is real-time.

Key Features:

• The software is very convenient to use because of its responsive and easy-to-understand interface. Even beginners can use it.
• Voxal Voice Changer converts your voice to a wide range of sounds. You can select between different options, including cartoons characters, women, aliens, etc.
• Moreover, if you want personalized sound effects, then the software has a wide range to offer.

3. VoiceMod

Do you know about the best voice changer? Well, VoiceMod is the answer. The software can add real-time voice effects. It supports various programs like Skype, TeamSpeak, Discord, and others. Moreover, VoiceMod extends its support to various games, including Minecraft, Fortnite, League of Legends, etc.

VoiceMod is compatible with Windows Operating System. The software has a wide spectrum of voice effects that include Chipmunk, baby, alien, etc.

Key Features:

• The software is compatible with other powerful software—for instance, Audacity, Omegle, Twitch, Elgato Stream Deck.
• With VoiceMod, you can add cool sound effects and surprise your friends in any chatting or video chat application.
• The voice changer has a massive sound effect library to select from.

Best Voice Altering Software

Convert voice to another voice by using different ways. Customize and re-edit audio with powerful audio and video editor!

Try Voice Changer Software Try Voice Changer Software

Learn More >>

Try It Free >>

4. MorphVOX Pro

Do you know any software that allows noise cancellation? Let us tell you that MorphVOX PRO can do that. The software has so much to offer. For instance, you can enhance sound quality with this sound changer. With MorphVOX Pro, you can change your voice. You can sound exactly like your character in a game.

Key Features:

• MorphVOX Pro has a noise cancellation feature. You can use it to get an ultra-quiet background.
• The software has a wide range of audio effects to offer you. It lets you select from a high-quality array of audio effects.
• This voice changer is powerful and intuitive. Along with that, the sound effects are dispatched with quick keys.

5. All-in-One Voice Changer

All-in-One Voice Changer is free voice-changing software and is easily accessible. Moreover, the software is designed with multiple platforms. Every platform offers various voice options that you can select and alter with. All-in-One Voice Changer works well with Skype.

Key Features:

• The fascinating thing about this software is its ease. You can understand, handle and work with the software without facing any trouble.
• All-in-One Voice Changer allows its users to run and review the test recordings.
• With this software, you can communicate on Skype with the correct pitch and tone.

6. Murf

Murf is software that works like a professional voice changer. This is powerful enough to convert your ordinary voiceover from house recording to something that sounds like recorded in a professional studio. With Murf, you don’t need any recording equipment. The software allows you to transcribe and also edit the voice recording.

Key Features:

• The sound changer Murf software uses AI (Artificial Intelligence) technology. With this technology, the software creates high-quality voiceovers.
• Do you want to sound like someone else? With Murf, you can sound like 100+ different voices.
• You can set your voice with this software. Play with the settings. You can adjust the emphasis, speed, and also pitch of your voice.

Filmora Voice Changer

Best Voice Dhanger for PC

Easily change your voice from your sound to another person’s sound, as well as get more funny sound effects.

Best Voice Changing Software Best Voice Changing Software Learn More >

Try It Free >>

Part 2: 5 Best Voice Changer App for Mobile [Android/iOS]

Whenever a tool or application is designed and developed, it is kept in mind that there are two entirely different operating systems. Some people use Android devices, whereas others use iOS devices. In this section, we will talk about the best sound changers for both Android and iOS. So, let’s begin.

1 - RoboVox	2 - MagicCall
3 - Voice Changer Plus	4 - Snapchat
5 - VoiceFX

1. RoboVox

A wonderful voice changer application for Android and iOS devices is RoboVox . The application is famous because it converts voice into scary, funny, and robotic sounds. RoboVox has 32 different voice styles that you can select from. You can even play with the modulation settings and also with the pitch.

RoboVox has various inbuilt tools. They help the user to record and change the voice into multiple forms. The application has easy usage as you can easily transform your voice.

Key Features:

• RoboVox allows social sharing. After you have saved the recording, you can share it directly with your SoundCloud.
• The application offers 3 different modes. These are Real-time, Parrot, and also Recording mode.
• You can either save your creation or email it in WAV format. You can also set the transformed voice as your ringtone.

2. MagicCall

Are you looking for a good voice changer to prank your friends? MagicCall can help you with this. The fascinating thing about this voice changer is that you can use it during a call. With this application, change your voice in real-time on a call. With MagicCall, you can also record your calls and share them later.

Key Features:

• The application is the best male-to-female voice changer and vice versa. You can sound like a female, male, and also a cartoon with this.
• The application is the cheapest way to change your voice. You can switch between different voices. Also, enjoy playing sound emoticons during a call.
• What most people don’t know is that you get free credit on first-time registration.

3. Voice Changer Plus

Ready to learn about something where you can add voice filters? Voice Changer Plus lets you do that. With this iOS application, you can easily share all your recordings. An interesting thing, you share for free. Voice Changer Plus offers dozens of sound effects and different voices to choose from.

Key Features:

• The application has 55 distinct and unique voice effects, and a variety of background sounds that you can work with.
• Voice Changer Plus allows you to have Trim control. Along with that, the application fully supports voiceover.
• One interesting thing that should not be skipped is that you can layer more effects on any of your saved recordings.

4. Snapchat

A very famous application for both Android and iOS users is Snapchat . The application has a straightforward and simple voice modulation process. Snapchat offers hundreds of video filters. Along with that, a broad spectrum of voice filters is also found on Snapchat. The fun-filled application also allows messaging.

Key Features:

• With Snapchat, you can find like-minded people. Make new friends and prank them by using this sound changer.
• The application offers a wide variety of sound filters. Moreover, the filters and lenses are updated daily.
• You can make fun stories with Snapchat and share them. You can also discover new and original shows with this app.

5. VoiceFX

Do you know any sound changer that streams your transformed voice to media players or web browsers? Well, VoiceFX can do this. With this Android application, you can stream live your changed voice. VoiceFX also lets you modulate any of your pre-recorded audio files. The application allows you to export files in MP3 format.

Key Features:

• With VoiceFX, apply various voice effects to your voice in real-time. Also, it offers live streaming.
• You can change your voice to different styles. For instance, the available styles are Autotune, Female, Male, Robot, Chipmunk, etc.
• An amazing thing about VoiceFX is that you can use the changed voice and set it as a notification or phone ringtone.

Bottom Line

Voice Changing Software is very useful now a day. The fact that internet is full of different tools and software, you might get confused while selecting the best voice changer. For this reason, we are here to help you. The article has discussed the 11 best voice changer software for both PC and mobile. After reading this, all your confusion will vanish.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

Part 2 5 Best Voice Changer App for Mobile [Android/iOS]

Part 1: 6 Best Voice Changer for PC

Are you ready to learn about voice-changing software? First of all, we will start with voice changers that are best for PC.

1 - Filmora Voice Changer	2 - Voxal Voice Changer
3 - VoiceMod	4 - MorphVOX PRO
5 - All-in-One Voice Changer	6 - Murf

1. Filmora Voice Changer

Filmora Voice Changer - the best voice changer for pc, offers 3 ways to change your voice with ease - tune up and down, change the audio equalizer, and apply voice effects. Watch the video below to find out how to change voice in professional results.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

Plus, it also is a comprehensive tool for editing video and audio. Filmora owns multiple AI tools for saving your time in video and audio creating, AI denoise, STT, TTS, silence detection, etc. Get more fun through Filmora!

Key Features:

• Offers various built-in templates and effects for making videos.
• User-friendly with AI creation.
• Auto reframe to match different ratios of popular social media.

2. Voxal Voice Changer

Voxal Voice Changer is a powerful, real-time professional voice changer. The software is simple but has crazy features. With Voxal Voice changer, you can alter, camouflage, and also change your voice. Importantly, the software consumes minimum CPU space. Moreover, the voice changer is compatible with a lot of applications and games.

Voxal Voice Changer offers a variety of different sound effects. The software is famous because it changes live voice and it is real-time.

Key Features:

• The software is very convenient to use because of its responsive and easy-to-understand interface. Even beginners can use it.
• Voxal Voice Changer converts your voice to a wide range of sounds. You can select between different options, including cartoons characters, women, aliens, etc.
• Moreover, if you want personalized sound effects, then the software has a wide range to offer.

3. VoiceMod

Do you know about the best voice changer? Well, VoiceMod is the answer. The software can add real-time voice effects. It supports various programs like Skype, TeamSpeak, Discord, and others. Moreover, VoiceMod extends its support to various games, including Minecraft, Fortnite, League of Legends, etc.

VoiceMod is compatible with Windows Operating System. The software has a wide spectrum of voice effects that include Chipmunk, baby, alien, etc.

Key Features:

• The software is compatible with other powerful software—for instance, Audacity, Omegle, Twitch, Elgato Stream Deck.
• With VoiceMod, you can add cool sound effects and surprise your friends in any chatting or video chat application.
• The voice changer has a massive sound effect library to select from.

Best Voice Altering Software

Convert voice to another voice by using different ways. Customize and re-edit audio with powerful audio and video editor!

Try Voice Changer Software Try Voice Changer Software

Learn More >>

Try It Free >>

4. MorphVOX Pro

Do you know any software that allows noise cancellation? Let us tell you that MorphVOX PRO can do that. The software has so much to offer. For instance, you can enhance sound quality with this sound changer. With MorphVOX Pro, you can change your voice. You can sound exactly like your character in a game.

Key Features:

• MorphVOX Pro has a noise cancellation feature. You can use it to get an ultra-quiet background.
• The software has a wide range of audio effects to offer you. It lets you select from a high-quality array of audio effects.
• This voice changer is powerful and intuitive. Along with that, the sound effects are dispatched with quick keys.

5. All-in-One Voice Changer

All-in-One Voice Changer is free voice-changing software and is easily accessible. Moreover, the software is designed with multiple platforms. Every platform offers various voice options that you can select and alter with. All-in-One Voice Changer works well with Skype.

Key Features:

• The fascinating thing about this software is its ease. You can understand, handle and work with the software without facing any trouble.
• All-in-One Voice Changer allows its users to run and review the test recordings.
• With this software, you can communicate on Skype with the correct pitch and tone.

6. Murf

Murf is software that works like a professional voice changer. This is powerful enough to convert your ordinary voiceover from house recording to something that sounds like recorded in a professional studio. With Murf, you don’t need any recording equipment. The software allows you to transcribe and also edit the voice recording.

Key Features:

• The sound changer Murf software uses AI (Artificial Intelligence) technology. With this technology, the software creates high-quality voiceovers.
• Do you want to sound like someone else? With Murf, you can sound like 100+ different voices.
• You can set your voice with this software. Play with the settings. You can adjust the emphasis, speed, and also pitch of your voice.

Filmora Voice Changer

Best Voice Dhanger for PC

Easily change your voice from your sound to another person’s sound, as well as get more funny sound effects.

Best Voice Changing Software Best Voice Changing Software Learn More >

Try It Free >>

Part 2: 5 Best Voice Changer App for Mobile [Android/iOS]

Whenever a tool or application is designed and developed, it is kept in mind that there are two entirely different operating systems. Some people use Android devices, whereas others use iOS devices. In this section, we will talk about the best sound changers for both Android and iOS. So, let’s begin.

1 - RoboVox	2 - MagicCall
3 - Voice Changer Plus	4 - Snapchat
5 - VoiceFX

1. RoboVox

A wonderful voice changer application for Android and iOS devices is RoboVox . The application is famous because it converts voice into scary, funny, and robotic sounds. RoboVox has 32 different voice styles that you can select from. You can even play with the modulation settings and also with the pitch.

RoboVox has various inbuilt tools. They help the user to record and change the voice into multiple forms. The application has easy usage as you can easily transform your voice.

Key Features:

• RoboVox allows social sharing. After you have saved the recording, you can share it directly with your SoundCloud.
• The application offers 3 different modes. These are Real-time, Parrot, and also Recording mode.
• You can either save your creation or email it in WAV format. You can also set the transformed voice as your ringtone.

2. MagicCall

Are you looking for a good voice changer to prank your friends? MagicCall can help you with this. The fascinating thing about this voice changer is that you can use it during a call. With this application, change your voice in real-time on a call. With MagicCall, you can also record your calls and share them later.

Key Features:

• The application is the best male-to-female voice changer and vice versa. You can sound like a female, male, and also a cartoon with this.
• The application is the cheapest way to change your voice. You can switch between different voices. Also, enjoy playing sound emoticons during a call.
• What most people don’t know is that you get free credit on first-time registration.

3. Voice Changer Plus

Ready to learn about something where you can add voice filters? Voice Changer Plus lets you do that. With this iOS application, you can easily share all your recordings. An interesting thing, you share for free. Voice Changer Plus offers dozens of sound effects and different voices to choose from.

Key Features:

• The application has 55 distinct and unique voice effects, and a variety of background sounds that you can work with.
• Voice Changer Plus allows you to have Trim control. Along with that, the application fully supports voiceover.
• One interesting thing that should not be skipped is that you can layer more effects on any of your saved recordings.

4. Snapchat

A very famous application for both Android and iOS users is Snapchat . The application has a straightforward and simple voice modulation process. Snapchat offers hundreds of video filters. Along with that, a broad spectrum of voice filters is also found on Snapchat. The fun-filled application also allows messaging.

Key Features:

• With Snapchat, you can find like-minded people. Make new friends and prank them by using this sound changer.
• The application offers a wide variety of sound filters. Moreover, the filters and lenses are updated daily.
• You can make fun stories with Snapchat and share them. You can also discover new and original shows with this app.

5. VoiceFX

Do you know any sound changer that streams your transformed voice to media players or web browsers? Well, VoiceFX can do this. With this Android application, you can stream live your changed voice. VoiceFX also lets you modulate any of your pre-recorded audio files. The application allows you to export files in MP3 format.

Key Features:

• With VoiceFX, apply various voice effects to your voice in real-time. Also, it offers live streaming.
• You can change your voice to different styles. For instance, the available styles are Autotune, Female, Male, Robot, Chipmunk, etc.
• An amazing thing about VoiceFX is that you can use the changed voice and set it as a notification or phone ringtone.

Bottom Line

Voice Changing Software is very useful now a day. The fact that internet is full of different tools and software, you might get confused while selecting the best voice changer. For this reason, we are here to help you. The article has discussed the 11 best voice changer software for both PC and mobile. After reading this, all your confusion will vanish.

Change Voice for Free

For Win 7 or later (64-bit)

Change Voice for Free

For macOS 10.14 or later

Try It Free >>

Also read: