Echoing Quietness: A Guide to Purifying Your Podcasts From High-Frequency Humming

Creating content can be fun most of the time. The shoot is perfect and the scenes are spotless. You are confident that you got everything right. But then, when you listen to the recording, you notice a continuous hissing sound. This takes you back as you have to decide to remove hiss from audio before editing the video. Luckily, several hiss removal approaches will work just fine. In this article, we take you through the audio cleanup process to help you with your hiss reduction efforts.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Revitalize Audio Diminishments in Video Presentation

How to Increase Volume of the Media Files

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

The Choreography of Cinematography: Techniques for Effortless Scene Progression

How to Add Video and Audio Transition Between Scenes/Clips

Liza Brown

Mar 27, 2024• Proven solutions

Transition effects appear when one slide/clip replaces another one. It helps make the presentation, slideshow or movie good looking and impressive. Transition effects are widely used in and video editing software, such as Windows Movie Maker, iMovie, DVD Slideshow Builder, etc. You can also use transition sound effects to make amazing videos.

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

• Part 1: Add video transitions between clips
• Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

Before adding video/photo files to the Timeline, you need to import them first into the project. There are mainly 2 ways to import video/photo files: “Import” button on primary windows, or dragging and dropping files from Windows File Explorer to the User’s Album. Wondershare Filmora supports all popular video/audio/photo formats, including but not limited to AVI, MP4, MOV, MPEG, MPG, FLV, M4V, WMV, TS, MOD, TOD, VOB, MP3, WMA, M4A, JPG, PNG, BMP, and GIF. Then drag and drop the media files from the Media album to the video track on timline for editing

3. Add transitions between video and photo files

All clips will be played one by one without a gap. But no transition effects will be applied by default. To add transitions, switch to Transition tab and drag any transition to the joint of two clips from almost 200 transitions (when the white box appears, release your mouse). Now, you could also add transition at the end or start of a clip.

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

1. If you want to set the transition duration, it’s better to enlarge the Timeline view through the Zoom in tool or slider above the Timeline. Next, double click the transition thumbnail to open the setting panel and input the time. Click “Apply to All” if you want all transition effects to have the same duration.

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

When you are happy with your video and transition effects, click “Create” to save the video with transitions. You can save video in all popular formats on the computer by clicking “Format” and choosing a format from the list. If you want to play your video on iPod, iPhone, iPad, click “Device” and select a thumbnail of the device. It’s also available to upload your videos to YouTube to share with your friends. To play video on TV, you can burn it to DVD with your DVD burner.

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Filmora also allows you to add transitions between audio files. Using the fade-in and fade-out feature to make your audio process smoontly. With the complete new waveform and audio keyframing. Check this video to see the details about video transition in Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Transition effects appear when one slide/clip replaces another one. It helps make the presentation, slideshow or movie good looking and impressive. Transition effects are widely used in and video editing software, such as Windows Movie Maker, iMovie, DVD Slideshow Builder, etc. You can also use transition sound effects to make amazing videos.

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

• Part 1: Add video transitions between clips
• Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

Before adding video/photo files to the Timeline, you need to import them first into the project. There are mainly 2 ways to import video/photo files: “Import” button on primary windows, or dragging and dropping files from Windows File Explorer to the User’s Album. Wondershare Filmora supports all popular video/audio/photo formats, including but not limited to AVI, MP4, MOV, MPEG, MPG, FLV, M4V, WMV, TS, MOD, TOD, VOB, MP3, WMA, M4A, JPG, PNG, BMP, and GIF. Then drag and drop the media files from the Media album to the video track on timline for editing

3. Add transitions between video and photo files

All clips will be played one by one without a gap. But no transition effects will be applied by default. To add transitions, switch to Transition tab and drag any transition to the joint of two clips from almost 200 transitions (when the white box appears, release your mouse). Now, you could also add transition at the end or start of a clip.

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

1. If you want to set the transition duration, it’s better to enlarge the Timeline view through the Zoom in tool or slider above the Timeline. Next, double click the transition thumbnail to open the setting panel and input the time. Click “Apply to All” if you want all transition effects to have the same duration.

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

When you are happy with your video and transition effects, click “Create” to save the video with transitions. You can save video in all popular formats on the computer by clicking “Format” and choosing a format from the list. If you want to play your video on iPod, iPhone, iPad, click “Device” and select a thumbnail of the device. It’s also available to upload your videos to YouTube to share with your friends. To play video on TV, you can burn it to DVD with your DVD burner.

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Filmora also allows you to add transitions between audio files. Using the fade-in and fade-out feature to make your audio process smoontly. With the complete new waveform and audio keyframing. Check this video to see the details about video transition in Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Transition effects appear when one slide/clip replaces another one. It helps make the presentation, slideshow or movie good looking and impressive. Transition effects are widely used in and video editing software, such as Windows Movie Maker, iMovie, DVD Slideshow Builder, etc. You can also use transition sound effects to make amazing videos.

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

• Part 1: Add video transitions between clips
• Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

Before adding video/photo files to the Timeline, you need to import them first into the project. There are mainly 2 ways to import video/photo files: “Import” button on primary windows, or dragging and dropping files from Windows File Explorer to the User’s Album. Wondershare Filmora supports all popular video/audio/photo formats, including but not limited to AVI, MP4, MOV, MPEG, MPG, FLV, M4V, WMV, TS, MOD, TOD, VOB, MP3, WMA, M4A, JPG, PNG, BMP, and GIF. Then drag and drop the media files from the Media album to the video track on timline for editing

3. Add transitions between video and photo files

All clips will be played one by one without a gap. But no transition effects will be applied by default. To add transitions, switch to Transition tab and drag any transition to the joint of two clips from almost 200 transitions (when the white box appears, release your mouse). Now, you could also add transition at the end or start of a clip.

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

1. If you want to set the transition duration, it’s better to enlarge the Timeline view through the Zoom in tool or slider above the Timeline. Next, double click the transition thumbnail to open the setting panel and input the time. Click “Apply to All” if you want all transition effects to have the same duration.

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

When you are happy with your video and transition effects, click “Create” to save the video with transitions. You can save video in all popular formats on the computer by clicking “Format” and choosing a format from the list. If you want to play your video on iPod, iPhone, iPad, click “Device” and select a thumbnail of the device. It’s also available to upload your videos to YouTube to share with your friends. To play video on TV, you can burn it to DVD with your DVD burner.

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Filmora also allows you to add transitions between audio files. Using the fade-in and fade-out feature to make your audio process smoontly. With the complete new waveform and audio keyframing. Check this video to see the details about video transition in Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Transition effects appear when one slide/clip replaces another one. It helps make the presentation, slideshow or movie good looking and impressive. Transition effects are widely used in and video editing software, such as Windows Movie Maker, iMovie, DVD Slideshow Builder, etc. You can also use transition sound effects to make amazing videos.

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

• Part 1: Add video transitions between clips
• Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

Before adding video/photo files to the Timeline, you need to import them first into the project. There are mainly 2 ways to import video/photo files: “Import” button on primary windows, or dragging and dropping files from Windows File Explorer to the User’s Album. Wondershare Filmora supports all popular video/audio/photo formats, including but not limited to AVI, MP4, MOV, MPEG, MPG, FLV, M4V, WMV, TS, MOD, TOD, VOB, MP3, WMA, M4A, JPG, PNG, BMP, and GIF. Then drag and drop the media files from the Media album to the video track on timline for editing

3. Add transitions between video and photo files

All clips will be played one by one without a gap. But no transition effects will be applied by default. To add transitions, switch to Transition tab and drag any transition to the joint of two clips from almost 200 transitions (when the white box appears, release your mouse). Now, you could also add transition at the end or start of a clip.

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

1. If you want to set the transition duration, it’s better to enlarge the Timeline view through the Zoom in tool or slider above the Timeline. Next, double click the transition thumbnail to open the setting panel and input the time. Click “Apply to All” if you want all transition effects to have the same duration.

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

When you are happy with your video and transition effects, click “Create” to save the video with transitions. You can save video in all popular formats on the computer by clicking “Format” and choosing a format from the list. If you want to play your video on iPod, iPhone, iPad, click “Device” and select a thumbnail of the device. It’s also available to upload your videos to YouTube to share with your friends. To play video on TV, you can burn it to DVD with your DVD burner.

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Filmora also allows you to add transitions between audio files. Using the fade-in and fade-out feature to make your audio process smoontly. With the complete new waveform and audio keyframing. Check this video to see the details about video transition in Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Also read: