“The Essential Summary: 5 Superior, Cost-Free Audio Volume Correctors”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Navigating TikTok’s Volume Settings: Essential Methods for Quiet Videos

TikTok provides some enjoyment, comfort, and inside jokes, contributing to developing a sense of community among its users.

However, you probably wouldn’t have needed to learn how to mute audio in TikTok two or three years ago, but we’re now living in one of the most turbulent periods in human history, so it’s a skill that’s become more critical.

When you upload specific popular music files to TikTok, you won’t be able to publish the video or find it muted because of the copyright restrictions placed on the audio files. So, how will you turn off the music on TikTok and choose a different soundtrack to listen to? Naturally, you may directly alter the audio level in TikTok. When you need to swap for another one and sync it with your audio, you can learn more about the best alternative and how to mute TikTok audio using three different ways.

Part 1: Method 1: Use the TikTok Built-In Editor to Mute Audio

You should be aware that the music files obtained from TikTok can only be helpful for a personal account, even if you are utilizing the music files obtained from TikTok. If you need to repost the TikTok video or add new soundtracks immediately, you must first learn how to mute audio on the TikTok video using the following method. This is required regardless of whatever option you choose.

Step1 Launch TikTok on Your Device

Log in to your account, then go to the clip whose sound you wish to mute. To turn off the sound on the TikTok video, you must go to the editing page and choose the Sounds option.

Step2 Modify the Sound

Choose a sound at random to add to your video, such as “Cold-Blooded,” then press the “Loudness” option to change the sound’s volume or remix it to create a new sound.

Step3 Mute the Audio

You can silence the video on TikTok by moving the Added and Original sound sliders until they shift to zero. This will mute the additional sound that you added to the TikTok video.

A Guide to Turning Off the Sound on TikTok Before You Record

Here is a guide on how to mute audio in TikTok before recording.

Step1 Start TikTok App

Download a video with no sound and save it in your device’s memory as the first step. Start the TikTok app from the home screen or the app drawer on your device and access the new video screen by tapping the + sign at the bottom of the screen.

Step2 Choose the File to Mute

Select the movie to be mute, click the Next button, then hit the Post button once you have tapped the Upload button. After tapping the disc symbol, select Add to Favorites from the menu and produce a Noise.

Step3 Mute the Audio

Return to the screen that displays the new video. Now, mute audio on TikTok by tapping the Add Sound menu at the top of the screen. Then pick the mute video option that appears under the My Favorites area. Include Noise.

Step4 Record

Finally, to make a new video, tap the Record button, and follow the on-screen instructions to post the silent video to the TikTok platform.

How to Turn Off Sound in TikTok Clip

Crazy about posting TikTok Clips? Well, read on to learn how to mute original audio in TikTok.

Step1 Visit New Video Page

Go to the new video page, where you may either shoot a video or upload the one you already have.

Step2 Add New Sound

Tap the Sound option at the bottom left portion of the screen once the video uploads to the sound screen. In this section, you will find the option to add a new sound to the video.

Step3 Lower Original Sound

From the bottom, go to the tab labeled “Volume.” TikTok users may turn off the original audio by lowering the “Original sound” slider to 0. To silence the video on TikTok, reduce the original sound volume and add sounds until they reach 0 percent.

Lastly, publish the video by clicking the Next button.

Note: after adding a sound to a clip on TikTok, you have the option to silence it by tapping the Cut symbol on the toolbar.

Part 2: Method 2: Use Filmora to Remove the Original Audio and Upload it to TikTok Directly

On TikTok, you cannot mute the video’s sound and then repost it. Instead, you will need to choose new music that works better with the movie and then sync the file. Filmora from Wondershare is a multifunctional audio editor that you can use to handle the sound files of TikTok. This editor offers features that include muting the music on TikTok, syncing the audio with the video, increasing the audio loudness, and many more. You can also modify the audio files, reduce the audio clip, combine several sound recordings, and use other complex capabilities.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Here is how to mute the original audio on TikTok using Filmora:

Step1 Download and Install Filmora

Launch the program and import the video you want to add to your TikTok.

You can insert another sound or mute the current sound completely. Adjust the Volume option slider to mute the audio of the TikTok video and go-to export. Click the TikTok Menu option.

Step2 Log in to your TikTok Account

Now, log in to your TikTok account and export your video directly to TikTok.

Part 3: FAQs

1. How do I mute a video in an editor?

You may mute a video by uploading it or importing it from a website like YouTube. Make sure your video has audio since turning the volume down won’t do anything if it doesn’t. Use the context menu to choose Mute after right-clicking on the video clip. The audio on the video clip will delete due to this action, but the audio will remain for that particular clip.

2. How do you edit sound on TikTok?

If you choose the scissors symbol with your finger, you’ll see a waveform emerge at the bottom of the screen. You may go to the song segment you wish to hear using your finger. From that location, you can see the song’s time stamps. You may also control the volume of the sound by using the option “Volume,” located at the very bottom of the screen.

3. How do I repair a video muted on TikTok?

In case TikTok muted your video for any reason, you try these two options:

1. Delete the video, reupload it to TikTok, and then add sound to it while editing it so the video may get played. After that, reduce the sound level until it reaches zero, and you will be able to submit the video. You can include any sound in the video.
2. Ensure you do not reupload the exact video. You can use an external video editing tool like Filmora to add effects and cut the video into shorter clips. Once done, try reuploading the video and follow the TikTok guidelines this time.

Adding a sound to your video and lowering the level of that sound to zero is one way to prevent your video from being removed for violating copyright laws.

Conclusion

Thus, this tutorial covered how to mute your TikTok audio before and after you publish a video. You can instantly alter the level of the music already on the device or any additional sounds by using the built-in Sound function. Besides, we also listed the best tool, Filmora, via which you can generate silent movies for the social platform. In short, if a sound isn’t available on TikTok, you can get past TikTok’s limited library by producing your film using an additional editing tool like Filmora. This program also guides you on how to mute original audio in TikTok. It will help if you either get stuck composing your music or use the already available sounds on TikTok.

Part 2: Method 2: Use Filmora to Remove the Original Audio and Upload it to TikTok Directly

On TikTok, you cannot mute the video’s sound and then repost it. Instead, you will need to choose new music that works better with the movie and then sync the file. Filmora from Wondershare is a multifunctional audio editor that you can use to handle the sound files of TikTok. This editor offers features that include muting the music on TikTok, syncing the audio with the video, increasing the audio loudness, and many more. You can also modify the audio files, reduce the audio clip, combine several sound recordings, and use other complex capabilities.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Here is how to mute the original audio on TikTok using Filmora:

Step1 Download and Install Filmora

Launch the program and import the video you want to add to your TikTok.

You can insert another sound or mute the current sound completely. Adjust the Volume option slider to mute the audio of the TikTok video and go-to export. Click the TikTok Menu option.

Step2 Log in to your TikTok Account

Now, log in to your TikTok account and export your video directly to TikTok.

Part 3: FAQs

1. How do I mute a video in an editor?

You may mute a video by uploading it or importing it from a website like YouTube. Make sure your video has audio since turning the volume down won’t do anything if it doesn’t. Use the context menu to choose Mute after right-clicking on the video clip. The audio on the video clip will delete due to this action, but the audio will remain for that particular clip.

2. How do you edit sound on TikTok?

If you choose the scissors symbol with your finger, you’ll see a waveform emerge at the bottom of the screen. You may go to the song segment you wish to hear using your finger. From that location, you can see the song’s time stamps. You may also control the volume of the sound by using the option “Volume,” located at the very bottom of the screen.

3. How do I repair a video muted on TikTok?

In case TikTok muted your video for any reason, you try these two options:

1. Delete the video, reupload it to TikTok, and then add sound to it while editing it so the video may get played. After that, reduce the sound level until it reaches zero, and you will be able to submit the video. You can include any sound in the video.
2. Ensure you do not reupload the exact video. You can use an external video editing tool like Filmora to add effects and cut the video into shorter clips. Once done, try reuploading the video and follow the TikTok guidelines this time.

Adding a sound to your video and lowering the level of that sound to zero is one way to prevent your video from being removed for violating copyright laws.

Conclusion

Thus, this tutorial covered how to mute your TikTok audio before and after you publish a video. You can instantly alter the level of the music already on the device or any additional sounds by using the built-in Sound function. Besides, we also listed the best tool, Filmora, via which you can generate silent movies for the social platform. In short, if a sound isn’t available on TikTok, you can get past TikTok’s limited library by producing your film using an additional editing tool like Filmora. This program also guides you on how to mute original audio in TikTok. It will help if you either get stuck composing your music or use the already available sounds on TikTok.

Cutting Through Chaos: Effective Techniques to Silence Unwanted Sounds in Audacity and FilmoraPro

How to Do Noise Reduction in Audacity and FilmoraPro Easily

Liza Brown

Mar 27, 2024• Proven solutions

For a recording to have good audio quality , it needs to have as little background noise as possible. Background noise is any constant sound which was not intentionally added to an audio recording. The lesser the background noise a listener can hear, the better the quality of an audio recording. This is why noise reduction is a very important part of the finishing process for audio recordings.

Noise reduction is the process of getting rid of any constant background noises or interfering sounds that muddy the clarity of your audio recording or distract from its substance. With noise reduction, you can get rid of constant background sounds like the hum of a machine, the buzz of a fan, whistles, whines, and hisses.

The good news is that with software like Audacity, amateurs and professionals can easily do noise reduction in a few simple steps. In this post, we show you how to easily do noise reduction in Audacity.

Part 1: How to do noise reduction in Audacity

Audacity is a lightweight opensource audio recording and editing software that’s used by many serious podcasters and vloggers. It has PC and MAC versions, and it can be downloaded with an easy-to-read manual. Before you begin the noise reduction process, assess your audio recording, taking note of parts that have background noise and the different background sounds in the recording. You should also form the habit of taking a separate recording of the ROOM TONE. You can know more infomation of Audacity from PCmag review . This recording will provide a clear sample of the background noise in the room and will be very useful in the noise reduction process. See steps below:

• The first step is to create a NOISE PROFILE. This profile tells Audacity the nature of the noise to be reduced or eliminated from the audio recording. To create a NOISE PROFILE, open your ROOM TONE recording and click on EFFECT > NOISE REDUCTION.
• If you didn’t make a ROOM TONE recording, then open the audio file you want to process. Once opened, click and drag over a section that contains mostly noise to select it. Then, click on EFFECT > NOISE REDUCTION.

• Once a new window labelled ‘STEP 1’ opens, click on the ‘GET NOISE PROFILE’ button. This creates the NOISE PROFILE which Audacity will use in the noise reduction process.

• Next, select the entire audio file that requires noise reduction. Then, select NOISE REDUCTION from the EFFECTS tab on the top menu bar.
• When the new window labelled ‘STEP 2’ opens, take your time to enter the settings that give you the desired level of noise reduction. Carefully adjust the bands for NOISE REDUCTION, SENSITIVITY and FREQUENCY SMOOTHING.

• Now, click the PREVIEW button to hear the effect of your noise reduction settings. If you are not satisfied with the preview, you can adjust the settings bars until you achieve a good result.
• You should also click on the RESIDUE radio button to hear the sounds that will be eliminated from your recording if your chosen settings are applied. This can be very useful as some settings can result in the loss of valuable audio content. If you hear valuable audio content captured in the residue, adjust your settings accordingly. Try as much as possible to minimize the loss of valuable audio content.
• Once you are satisfied with your audio preview and residue, click the OK button with the REDUCE radio button selected. This will perform the noise reduction effect on your audio recording.

Conclusion

Keep in mind that noise reduction is not a perfect process and strong noise reduction settings can result in the loss of valuable audio content. Whether you choose to use Audacity or Filmora, try to strike the right balance between getting rid of background sounds and retaining valuable audio content.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

For a recording to have good audio quality , it needs to have as little background noise as possible. Background noise is any constant sound which was not intentionally added to an audio recording. The lesser the background noise a listener can hear, the better the quality of an audio recording. This is why noise reduction is a very important part of the finishing process for audio recordings.

Noise reduction is the process of getting rid of any constant background noises or interfering sounds that muddy the clarity of your audio recording or distract from its substance. With noise reduction, you can get rid of constant background sounds like the hum of a machine, the buzz of a fan, whistles, whines, and hisses.

The good news is that with software like Audacity, amateurs and professionals can easily do noise reduction in a few simple steps. In this post, we show you how to easily do noise reduction in Audacity.

Part 1: How to do noise reduction in Audacity

Audacity is a lightweight opensource audio recording and editing software that’s used by many serious podcasters and vloggers. It has PC and MAC versions, and it can be downloaded with an easy-to-read manual. Before you begin the noise reduction process, assess your audio recording, taking note of parts that have background noise and the different background sounds in the recording. You should also form the habit of taking a separate recording of the ROOM TONE. You can know more infomation of Audacity from PCmag review . This recording will provide a clear sample of the background noise in the room and will be very useful in the noise reduction process. See steps below:

• The first step is to create a NOISE PROFILE. This profile tells Audacity the nature of the noise to be reduced or eliminated from the audio recording. To create a NOISE PROFILE, open your ROOM TONE recording and click on EFFECT > NOISE REDUCTION.
• If you didn’t make a ROOM TONE recording, then open the audio file you want to process. Once opened, click and drag over a section that contains mostly noise to select it. Then, click on EFFECT > NOISE REDUCTION.

• Once a new window labelled ‘STEP 1’ opens, click on the ‘GET NOISE PROFILE’ button. This creates the NOISE PROFILE which Audacity will use in the noise reduction process.

• Next, select the entire audio file that requires noise reduction. Then, select NOISE REDUCTION from the EFFECTS tab on the top menu bar.
• When the new window labelled ‘STEP 2’ opens, take your time to enter the settings that give you the desired level of noise reduction. Carefully adjust the bands for NOISE REDUCTION, SENSITIVITY and FREQUENCY SMOOTHING.

• Now, click the PREVIEW button to hear the effect of your noise reduction settings. If you are not satisfied with the preview, you can adjust the settings bars until you achieve a good result.
• You should also click on the RESIDUE radio button to hear the sounds that will be eliminated from your recording if your chosen settings are applied. This can be very useful as some settings can result in the loss of valuable audio content. If you hear valuable audio content captured in the residue, adjust your settings accordingly. Try as much as possible to minimize the loss of valuable audio content.
• Once you are satisfied with your audio preview and residue, click the OK button with the REDUCE radio button selected. This will perform the noise reduction effect on your audio recording.

Conclusion

Keep in mind that noise reduction is not a perfect process and strong noise reduction settings can result in the loss of valuable audio content. Whether you choose to use Audacity or Filmora, try to strike the right balance between getting rid of background sounds and retaining valuable audio content.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

For a recording to have good audio quality , it needs to have as little background noise as possible. Background noise is any constant sound which was not intentionally added to an audio recording. The lesser the background noise a listener can hear, the better the quality of an audio recording. This is why noise reduction is a very important part of the finishing process for audio recordings.

Noise reduction is the process of getting rid of any constant background noises or interfering sounds that muddy the clarity of your audio recording or distract from its substance. With noise reduction, you can get rid of constant background sounds like the hum of a machine, the buzz of a fan, whistles, whines, and hisses.

The good news is that with software like Audacity, amateurs and professionals can easily do noise reduction in a few simple steps. In this post, we show you how to easily do noise reduction in Audacity.

Part 1: How to do noise reduction in Audacity

Audacity is a lightweight opensource audio recording and editing software that’s used by many serious podcasters and vloggers. It has PC and MAC versions, and it can be downloaded with an easy-to-read manual. Before you begin the noise reduction process, assess your audio recording, taking note of parts that have background noise and the different background sounds in the recording. You should also form the habit of taking a separate recording of the ROOM TONE. You can know more infomation of Audacity from PCmag review . This recording will provide a clear sample of the background noise in the room and will be very useful in the noise reduction process. See steps below:

• The first step is to create a NOISE PROFILE. This profile tells Audacity the nature of the noise to be reduced or eliminated from the audio recording. To create a NOISE PROFILE, open your ROOM TONE recording and click on EFFECT > NOISE REDUCTION.
• If you didn’t make a ROOM TONE recording, then open the audio file you want to process. Once opened, click and drag over a section that contains mostly noise to select it. Then, click on EFFECT > NOISE REDUCTION.

• Once a new window labelled ‘STEP 1’ opens, click on the ‘GET NOISE PROFILE’ button. This creates the NOISE PROFILE which Audacity will use in the noise reduction process.

• Next, select the entire audio file that requires noise reduction. Then, select NOISE REDUCTION from the EFFECTS tab on the top menu bar.
• When the new window labelled ‘STEP 2’ opens, take your time to enter the settings that give you the desired level of noise reduction. Carefully adjust the bands for NOISE REDUCTION, SENSITIVITY and FREQUENCY SMOOTHING.

• Now, click the PREVIEW button to hear the effect of your noise reduction settings. If you are not satisfied with the preview, you can adjust the settings bars until you achieve a good result.
• You should also click on the RESIDUE radio button to hear the sounds that will be eliminated from your recording if your chosen settings are applied. This can be very useful as some settings can result in the loss of valuable audio content. If you hear valuable audio content captured in the residue, adjust your settings accordingly. Try as much as possible to minimize the loss of valuable audio content.
• Once you are satisfied with your audio preview and residue, click the OK button with the REDUCE radio button selected. This will perform the noise reduction effect on your audio recording.

Conclusion

Keep in mind that noise reduction is not a perfect process and strong noise reduction settings can result in the loss of valuable audio content. Whether you choose to use Audacity or Filmora, try to strike the right balance between getting rid of background sounds and retaining valuable audio content.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

For a recording to have good audio quality , it needs to have as little background noise as possible. Background noise is any constant sound which was not intentionally added to an audio recording. The lesser the background noise a listener can hear, the better the quality of an audio recording. This is why noise reduction is a very important part of the finishing process for audio recordings.

Noise reduction is the process of getting rid of any constant background noises or interfering sounds that muddy the clarity of your audio recording or distract from its substance. With noise reduction, you can get rid of constant background sounds like the hum of a machine, the buzz of a fan, whistles, whines, and hisses.

The good news is that with software like Audacity, amateurs and professionals can easily do noise reduction in a few simple steps. In this post, we show you how to easily do noise reduction in Audacity.

Part 1: How to do noise reduction in Audacity

Audacity is a lightweight opensource audio recording and editing software that’s used by many serious podcasters and vloggers. It has PC and MAC versions, and it can be downloaded with an easy-to-read manual. Before you begin the noise reduction process, assess your audio recording, taking note of parts that have background noise and the different background sounds in the recording. You should also form the habit of taking a separate recording of the ROOM TONE. You can know more infomation of Audacity from PCmag review . This recording will provide a clear sample of the background noise in the room and will be very useful in the noise reduction process. See steps below:

• The first step is to create a NOISE PROFILE. This profile tells Audacity the nature of the noise to be reduced or eliminated from the audio recording. To create a NOISE PROFILE, open your ROOM TONE recording and click on EFFECT > NOISE REDUCTION.
• If you didn’t make a ROOM TONE recording, then open the audio file you want to process. Once opened, click and drag over a section that contains mostly noise to select it. Then, click on EFFECT > NOISE REDUCTION.

• Once a new window labelled ‘STEP 1’ opens, click on the ‘GET NOISE PROFILE’ button. This creates the NOISE PROFILE which Audacity will use in the noise reduction process.

• Next, select the entire audio file that requires noise reduction. Then, select NOISE REDUCTION from the EFFECTS tab on the top menu bar.
• When the new window labelled ‘STEP 2’ opens, take your time to enter the settings that give you the desired level of noise reduction. Carefully adjust the bands for NOISE REDUCTION, SENSITIVITY and FREQUENCY SMOOTHING.

• Now, click the PREVIEW button to hear the effect of your noise reduction settings. If you are not satisfied with the preview, you can adjust the settings bars until you achieve a good result.
• You should also click on the RESIDUE radio button to hear the sounds that will be eliminated from your recording if your chosen settings are applied. This can be very useful as some settings can result in the loss of valuable audio content. If you hear valuable audio content captured in the residue, adjust your settings accordingly. Try as much as possible to minimize the loss of valuable audio content.
• Once you are satisfied with your audio preview and residue, click the OK button with the REDUCE radio button selected. This will perform the noise reduction effect on your audio recording.

Conclusion

Keep in mind that noise reduction is not a perfect process and strong noise reduction settings can result in the loss of valuable audio content. Whether you choose to use Audacity or Filmora, try to strike the right balance between getting rid of background sounds and retaining valuable audio content.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Also read: