The Editor’s Guide to Beat Matching: Seamless Integration of Music and Motion in FCPX

How to Edit the Beat and Sync Videos to Music in Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Elevating Your Listenership Experience: The Highest-Rated 7 Audio Converters for Online Broadcasts

As the popularity of streaming services like YouTube and Twitch Gaming continues to grow, so does the need for high-quality audio in streams. If you want more viewers and followers, you have to make sure your content sounds great. To do this, you have to invest in good streaming mixers.

An audio mixer will help you adjust the levels of your different audio sources and add effects like reverb and delay. This can result in a world of difference in how your live stream sounds.

To help you find the best audio mixer for streaming, we’ve put together a list of the six best options on the market. So read on to find the perfect audio mixer for adding icing on the cake for your streams!

1. Pyle Professional Audio Mixer Sound Board Console
2. Mackie Mix8 8-Channel Compact Mixer
3. TC-Helicon GO XLR Broadcast Production Studio Mixer
4. YAMAHA MG06X 6-Input Compact Stereo Mixer
5. YOUSHARES Portable Digital Audio Mixer
6. Soundcraft EPM12 High-Performance 12-Channel Audio Mixer

• Bonus Tips: How To Record Your Live Stream Easily And Quickly?

Why Do You Need An Audio Mixer For Streaming?

If you’ve ever wondered why some people’s audio sounds so much better than others when streaming, it’s likely because they’re using an audio mixer.

An audio mixer is a console that takes multiple audio signals and combines them into one signal. This allows you to control the individual levels of each sound, as well as add special effects like EQ and reverb.

While you don’t necessarily need an audio mixer to stream, it can certainly make your life easier. So, if you’re planning on doing any sort of professional streaming, this device is a must-have. However, they can be expensive, complicated to use, and sometimes add latency to your live audio.

6 best Audio Mixer for Streaming

1.Pyle Professional Audio Mixer Sound Board Console

A Cost-Effective Audio Mixer

Product details

Price	$90.52 (With a discount)
Compatibility	External USB, Computer PC, Flash drive, Bluetooth device
Item Dimensions LxWxH	2.26 x 9.69 x 9.26 inches
Number of Channels	6
Connectivity Technology	Interface, XLR, USB, Bluetooth
Mic & Stereo line inputs	XLR, unbalanced 1/4” Plug with plus 48V Phantom button
Power supply	100V-240V (plus/minus 15V DC power adapter)

Introduction

Looking for a professional audio mixer that can take the sound in your streams to the next level? You need the Pyle Professional Audio Mixer Sound Board Console.

The console has 6 channels to mix multiple audio sources at once and also comes with an ultra-musical 3-band EQ for each channel so you can fine-tune the sound.

This audio mixer features that will help you create the perfect sound, such as support for XLR and an unbalanced 1/4” Plug with a +48V Phantom button, Bluetooth connectivity, ED Peak Level Indicator, and extra low noise. The downside, however, is the lack of customization options for streaming music.

Pros

• Has an audio interface and a USB sound card
• Easy-to-use functionalities
• Compatible with universal digital files
• high headroom mixer
• Rugged steel chassis

Cons

• Only basic music streaming capabilities

2.Mackie Mix8 8-Channel Compact Mixer

Best Artistic Audio Mixer

Product details

Price	$99.99
Compatibility	1 mic/line input
Item Dimensions LxWxH	9.6 x 7.8 x 2.1 inches
Number of Channels	8 Channels
Connectivity Technology	Auxiliary
Mic & Stereo line inputs	Dual Mic/Line Inputs with studio-level audio quality and 2 stereos 1/4” line inputs
Power supply	100-240V

Introduction

Mackie Mix8 8-Channel Compact Mixer is designed for podcasters, YouTubers, and other content creators who need a high-quality mixer in a small form factor.

Despite its small size, Mackie Mix8 gives a high-quality sound and is durable. The mixer has 8 channels - each with its level control, a 3-band EQ on all channels, phantom power for studio condenser mic, and 2 1/4” line input.

When it comes to design, this livestream sound mixer has a rugged, durable, and reliable structure. Moreover, it is compact in size and offers high portability.

Although this mixer is perfect for home studios or small venues, you won’t find enough channels to tune your music for large events.

Pros

• Supports 2 microphones at a time
• Affordable and easy to set up
• Compact design
• Mono and stereo inputs
  li>Headphone output having a separate volume control

Cons

• Not suitable as a primary mixer

3. TC-Helicon GO XLR Broadcast Production Studio Mixer

Super-fast USB Audio Mixer For Streaming

Product details

Price	$399.00 (after discount)
Compatibility	Windows 7, 8, and 10
Item Dimensions LxWxH	6.5 x 11 x 2.75 inches
Number of Channels	4-channels
Connectivity Technology	USB
Mic & Stereo line inputs	Mic Preamps: 1 x XLR, 1 x 1/8” TRS.
Power supply	12V DC

Introduction

The TC-Helicon GO XLR is an excellent audio mixer for streaming that gives you all the controls you need to create professional podcasts or videos.

The mixer has four channel mixers that let you control the audio sources in real-time, 48V phantom power for XLR mic, and a MIDAS preamp that lets you create a polished, professional sound.

With its vocal effects, including Morph, Reverb, Robot, Pitch Shift, HardTune, Megaphone, and Echo, you can fine-tune your music and engage your audiences like never before.

From its tons of customization options to RGB lighting and instant mute option to numerous audio effects, this audio mixer has everything a gamer or streamer needs. Like any other high-end sound mixer, TC-Helicon GO XLR is not cheap and comes with a huge price tag of $399 (after a 27% discount).

Pros

• Comes with customizable motorized faders
• Supports optical input for PlayStation/Xbox
• Built-in vocal effects and audio effects
• Instant mute button
• Easy to use and set up

Cons

• Not affordable for some users
• Only compatible with Windows operating system

4. YAMAHA MG06X 6-Input Compact Stereo Mixer

Best Lightweight Audio Mixer For Live Streaming

Product details

Price	US$143.20
Compatibility	PC
Item Dimensions LxWxH	10.63 x 9.53 x 4.69 inches
Number of Channels	6
Connectivity Technology	USB
Mic & Stereo line inputs	Max. 2 Mic / 6 Line Inputs (2 mono + 2 stereos)
Power supply	100-240V

Introduction

The Yamaha MG06X 6-Input Compact Stereo is a compact mixer that packs a lot of punch. With its onboard processors with 24 SPX digital effects, 48V phantom power, EQ, and High-pass Filters, the MG06X can easily handle live performances, recording sessions, and more.

And thanks to its intuitive interface, and compact and flexible design, the Yamaha MG06X is easy to take with you wherever you go. The mixer also features two mono XLR/TRS combo inputs with studio-quality preamps, two stereo line inputs, and a high-quality sound Op-amp.

Yamaha MG06X’s 1 Knob compressors make it easy to get punchy bass lines, a tighter snare, lively guitars, and a cleaner vocal sound. This top-of-the-line audio mixer provides peak performance and unrivaled sound quality, making it perfect for small-to-medium-sized venues. However, its input system is very slow and takes time to start audio.

Pros

• Delivers clean and natural sound
• 2 band EQ on all mono channels
• Durable and flexible design
• TRS and XLR 10 1/4 stereo output
• XLR 2 mono mic/line input and 2 1/4 stereo input
• BMS10A microphone stand adapter (optional)

Cons

• Customer service is not good

5.YOUSHARES Portable Digital Audio Mixer

Best Budget-Friendly Audio Mixer

Product details

Price	$69.99
Compatibility	Bluetooth, Laptop, Smartphones, and Tablets
Item Dimensions LxWxH	10.87 x 10.28 x 3.23 inches
Number of Channels	6
Connectivity Technology	Interface, Xlr, USB, Bluetooth
Mic & Stereo line inputs	4 XLR/TRS combined mono mic/line input jacks and 2 TRS & 2 RCA stereo input jacks
Power supply	DC 5V low voltage power supply

Introduction

The YOUSHARES Portable Digital Audio Mixer is a great tool for mixing multiple audio signals. This six-channel mixer has four XLR/TRS combined mono mic/line input jacks and two TRS & two RCA stereo input jacks, making it perfect for a variety of applications.

YOUSHARES audio mixer also has 24 DSP multipurpose effects, high and low sound adjustment, 48V phantom power, and is compatible with Bluetooth, smartphones, tablets, and laptops. This makes it perfect for daily use or on most occasions.

The mixer’s compact and durable design makes it highly portable, but it is not suitable for large events.

Pros

• Easy to Adjust
• The 4-channel mixing console and monitor paths
• Low-noise 4-channel audio mixer
• Built-in 48V phantom power
• high-definition headset output port
• 24 DSP multipurpose effects

Cons

• Not many channels for large events

6. Soundcraft EPM12 High-Performance 12-Channel Audio Mixer

High-end Audio Mixer For Live Streaming

Product details

Price	$439.00
Compatibility	Computer
Item Dimensions LxWxH	14.25 x 17 x 3.56 inches
Number of Channels	12+2
Connectivity Technology	Auxiliary
Mic & Stereo line inputs	XLR inputs and 2-band EQ on stereo inputs
Power supply	230 Volts

Introduction

The EPM12 is a high-performance 12-channel audio mixer with 2 configurable auxiliary buses, XLR-type, and 1/4-inches metal jack connector sockets.

The EPM12 has a stereo headphone output (stereo RCA) and an independent record output for monitoring. The input channels also have 3-band EQs with a swept mid control on mono inputs and +48V phantom power.

The EPM12 is designed to be compact, easy to use, and has an easy-to-read LCD display that can handle various tasks at once. One downside, however, is that this audio mixer is highly expensive and can cost you up to $439.00.

Pros

• 14 different channels
• 2 auxiliary buses
• 3-band EQ and +48V phantom power
• Precision GB30 mic preamps

Cons

• Extremely expensive

Bonus Tips: How To Record Your Live Stream Easily And Quickly?

Recording your live stream can be a great way to create content for your gaming channel or vlog. But it can also be a pain to set up and manage if you’re not familiar with the process.

Luckily, there are many user-friendly screen recorder programs available. Still, we recommend using Wondershare Filmora - a great option for gamers and vloggers, as it’s easy to use and comes with all the advanced features you need to record and edit your live stream.

Conclusion

In this article, we’ve provided a detailed review of the 6 best audio mixers for streaming live content on different platforms.

After testing and researching the six different audio mixers, we have concluded that the YOUSHARES Portable Digital Audio Mixer is the best audio console for streaming. This mixer is an affordable option that provides good sound quality and is easy to use. The Soundcraft EPM12 High-Performance 12-Channel Audio Mixer is a great choice for those who want a higher-end option.

We’ve also discussed a bonus tip for using Filmora to record your live streams and keep it for later sharing or any other purpose. Hopefully, you find this comprehensive review helpful and can now make the right buying decision.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Why Do You Need An Audio Mixer For Streaming?

If you’ve ever wondered why some people’s audio sounds so much better than others when streaming, it’s likely because they’re using an audio mixer.

An audio mixer is a console that takes multiple audio signals and combines them into one signal. This allows you to control the individual levels of each sound, as well as add special effects like EQ and reverb.

While you don’t necessarily need an audio mixer to stream, it can certainly make your life easier. So, if you’re planning on doing any sort of professional streaming, this device is a must-have. However, they can be expensive, complicated to use, and sometimes add latency to your live audio.

6 best Audio Mixer for Streaming

1.Pyle Professional Audio Mixer Sound Board Console

A Cost-Effective Audio Mixer

Product details

Price	$90.52 (With a discount)
Compatibility	External USB, Computer PC, Flash drive, Bluetooth device
Item Dimensions LxWxH	2.26 x 9.69 x 9.26 inches
Number of Channels	6
Connectivity Technology	Interface, XLR, USB, Bluetooth
Mic & Stereo line inputs	XLR, unbalanced 1/4” Plug with plus 48V Phantom button
Power supply	100V-240V (plus/minus 15V DC power adapter)

Introduction

Looking for a professional audio mixer that can take the sound in your streams to the next level? You need the Pyle Professional Audio Mixer Sound Board Console.

The console has 6 channels to mix multiple audio sources at once and also comes with an ultra-musical 3-band EQ for each channel so you can fine-tune the sound.

This audio mixer features that will help you create the perfect sound, such as support for XLR and an unbalanced 1/4” Plug with a +48V Phantom button, Bluetooth connectivity, ED Peak Level Indicator, and extra low noise. The downside, however, is the lack of customization options for streaming music.

Pros

• Has an audio interface and a USB sound card
• Easy-to-use functionalities
• Compatible with universal digital files
• high headroom mixer
• Rugged steel chassis

Cons

• Only basic music streaming capabilities

2.Mackie Mix8 8-Channel Compact Mixer

Best Artistic Audio Mixer

Product details

Price	$99.99
Compatibility	1 mic/line input
Item Dimensions LxWxH	9.6 x 7.8 x 2.1 inches
Number of Channels	8 Channels
Connectivity Technology	Auxiliary
Mic & Stereo line inputs	Dual Mic/Line Inputs with studio-level audio quality and 2 stereos 1/4” line inputs
Power supply	100-240V

Introduction

Mackie Mix8 8-Channel Compact Mixer is designed for podcasters, YouTubers, and other content creators who need a high-quality mixer in a small form factor.

Despite its small size, Mackie Mix8 gives a high-quality sound and is durable. The mixer has 8 channels - each with its level control, a 3-band EQ on all channels, phantom power for studio condenser mic, and 2 1/4” line input.

When it comes to design, this livestream sound mixer has a rugged, durable, and reliable structure. Moreover, it is compact in size and offers high portability.

Although this mixer is perfect for home studios or small venues, you won’t find enough channels to tune your music for large events.

Pros

• Supports 2 microphones at a time
• Affordable and easy to set up
• Compact design
• Mono and stereo inputs
  li>Headphone output having a separate volume control

Cons

• Not suitable as a primary mixer

3. TC-Helicon GO XLR Broadcast Production Studio Mixer

Super-fast USB Audio Mixer For Streaming

Product details

Price	$399.00 (after discount)
Compatibility	Windows 7, 8, and 10
Item Dimensions LxWxH	6.5 x 11 x 2.75 inches
Number of Channels	4-channels
Connectivity Technology	USB
Mic & Stereo line inputs	Mic Preamps: 1 x XLR, 1 x 1/8” TRS.
Power supply	12V DC

Introduction

The TC-Helicon GO XLR is an excellent audio mixer for streaming that gives you all the controls you need to create professional podcasts or videos.

The mixer has four channel mixers that let you control the audio sources in real-time, 48V phantom power for XLR mic, and a MIDAS preamp that lets you create a polished, professional sound.

With its vocal effects, including Morph, Reverb, Robot, Pitch Shift, HardTune, Megaphone, and Echo, you can fine-tune your music and engage your audiences like never before.

From its tons of customization options to RGB lighting and instant mute option to numerous audio effects, this audio mixer has everything a gamer or streamer needs. Like any other high-end sound mixer, TC-Helicon GO XLR is not cheap and comes with a huge price tag of $399 (after a 27% discount).

Pros

• Comes with customizable motorized faders
• Supports optical input for PlayStation/Xbox
• Built-in vocal effects and audio effects
• Instant mute button
• Easy to use and set up

Cons

• Not affordable for some users
• Only compatible with Windows operating system

4. YAMAHA MG06X 6-Input Compact Stereo Mixer

Best Lightweight Audio Mixer For Live Streaming

Product details

Price	US$143.20
Compatibility	PC
Item Dimensions LxWxH	10.63 x 9.53 x 4.69 inches
Number of Channels	6
Connectivity Technology	USB
Mic & Stereo line inputs	Max. 2 Mic / 6 Line Inputs (2 mono + 2 stereos)
Power supply	100-240V

Introduction

The Yamaha MG06X 6-Input Compact Stereo is a compact mixer that packs a lot of punch. With its onboard processors with 24 SPX digital effects, 48V phantom power, EQ, and High-pass Filters, the MG06X can easily handle live performances, recording sessions, and more.

And thanks to its intuitive interface, and compact and flexible design, the Yamaha MG06X is easy to take with you wherever you go. The mixer also features two mono XLR/TRS combo inputs with studio-quality preamps, two stereo line inputs, and a high-quality sound Op-amp.

Yamaha MG06X’s 1 Knob compressors make it easy to get punchy bass lines, a tighter snare, lively guitars, and a cleaner vocal sound. This top-of-the-line audio mixer provides peak performance and unrivaled sound quality, making it perfect for small-to-medium-sized venues. However, its input system is very slow and takes time to start audio.

Pros

• Delivers clean and natural sound
• 2 band EQ on all mono channels
• Durable and flexible design
• TRS and XLR 10 1/4 stereo output
• XLR 2 mono mic/line input and 2 1/4 stereo input
• BMS10A microphone stand adapter (optional)

Cons

• Customer service is not good

5.YOUSHARES Portable Digital Audio Mixer

Best Budget-Friendly Audio Mixer

Product details

Price	$69.99
Compatibility	Bluetooth, Laptop, Smartphones, and Tablets
Item Dimensions LxWxH	10.87 x 10.28 x 3.23 inches
Number of Channels	6
Connectivity Technology	Interface, Xlr, USB, Bluetooth
Mic & Stereo line inputs	4 XLR/TRS combined mono mic/line input jacks and 2 TRS & 2 RCA stereo input jacks
Power supply	DC 5V low voltage power supply

Introduction

The YOUSHARES Portable Digital Audio Mixer is a great tool for mixing multiple audio signals. This six-channel mixer has four XLR/TRS combined mono mic/line input jacks and two TRS & two RCA stereo input jacks, making it perfect for a variety of applications.

YOUSHARES audio mixer also has 24 DSP multipurpose effects, high and low sound adjustment, 48V phantom power, and is compatible with Bluetooth, smartphones, tablets, and laptops. This makes it perfect for daily use or on most occasions.

The mixer’s compact and durable design makes it highly portable, but it is not suitable for large events.

Pros

• Easy to Adjust
• The 4-channel mixing console and monitor paths
• Low-noise 4-channel audio mixer
• Built-in 48V phantom power
• high-definition headset output port
• 24 DSP multipurpose effects

Cons

• Not many channels for large events

6. Soundcraft EPM12 High-Performance 12-Channel Audio Mixer

High-end Audio Mixer For Live Streaming

Product details

Price	$439.00
Compatibility	Computer
Item Dimensions LxWxH	14.25 x 17 x 3.56 inches
Number of Channels	12+2
Connectivity Technology	Auxiliary
Mic & Stereo line inputs	XLR inputs and 2-band EQ on stereo inputs
Power supply	230 Volts

Introduction

The EPM12 is a high-performance 12-channel audio mixer with 2 configurable auxiliary buses, XLR-type, and 1/4-inches metal jack connector sockets.

The EPM12 has a stereo headphone output (stereo RCA) and an independent record output for monitoring. The input channels also have 3-band EQs with a swept mid control on mono inputs and +48V phantom power.

The EPM12 is designed to be compact, easy to use, and has an easy-to-read LCD display that can handle various tasks at once. One downside, however, is that this audio mixer is highly expensive and can cost you up to $439.00.

Pros

• 14 different channels
• 2 auxiliary buses
• 3-band EQ and +48V phantom power
• Precision GB30 mic preamps

Cons

• Extremely expensive

Bonus Tips: How To Record Your Live Stream Easily And Quickly?

Recording your live stream can be a great way to create content for your gaming channel or vlog. But it can also be a pain to set up and manage if you’re not familiar with the process.

Luckily, there are many user-friendly screen recorder programs available. Still, we recommend using Wondershare Filmora - a great option for gamers and vloggers, as it’s easy to use and comes with all the advanced features you need to record and edit your live stream.

Conclusion

In this article, we’ve provided a detailed review of the 6 best audio mixers for streaming live content on different platforms.

After testing and researching the six different audio mixers, we have concluded that the YOUSHARES Portable Digital Audio Mixer is the best audio console for streaming. This mixer is an affordable option that provides good sound quality and is easy to use. The Soundcraft EPM12 High-Performance 12-Channel Audio Mixer is a great choice for those who want a higher-end option.

We’ve also discussed a bonus tip for using Filmora to record your live streams and keep it for later sharing or any other purpose. Hopefully, you find this comprehensive review helpful and can now make the right buying decision.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Silencing the Stridor: Techniques for Defeating Hiss in Professional Recordings

Creating content can be fun most of the time. The shoot is perfect and the scenes are spotless. You are confident that you got everything right. But then, when you listen to the recording, you notice a continuous hissing sound. This takes you back as you have to decide to remove hiss from audio before editing the video. Luckily, several hiss removal approaches will work just fine. In this article, we take you through the audio cleanup process to help you with your hiss reduction efforts.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Also read: