Updated 2024 Approved Synchronize Your Tracks A Guide to Normalizing Audio with DaVinci Resolve

Synchronize Your Tracks: A Guide to Normalizing Audio with DaVinci Resolve

How To Normalize Audio In DaVinci Resolve

It happens a lot of times that we are not satisfied with several details our videos and audios contain, and we need to edit them. One of the most common problems we face is that our volumes are not normalized, and we need to take some extra time in order to achieve the best result for our audiences. Even with little or no knowledge about this very specific topic, we need to inform ourselves and find the solutions, make our videos more watch-able and our audios more listen-able, so to say.

There are several ways the audio normalization is achieved. One type is called peak normalization, helping adjust the recording based on the highest signal level present in the recording; the second is loudness normalization, adjusting the recording based on perceived loudness. RMS (Root-Mean-Square) changes the value of all the samples, where their average electrical volume overall is a specified level.

Mostly, there are two reasons why we should give audio normalization a try. You need to decide yourself, what is your reason and expected outcome when you use audio normalization. First is when your aim is to get the maximum volume, but the second boils down to matching different volumes with each other.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

More concretely, in general, audio normalization is when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, “the norm” for the project. It means that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

You can have the desired result using different kinds of software. Nowadays, a lot of programs offer you the tool which facilitates this process. So, one of them would be DaVinci Resolve, which we are going to discuss in this article.

What is DaVinci Resolve? The description goes: “DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool!” so, let’s discover what this software can do to help us balance the audio!

So, how to balance your audio in DaVinci Resolve? We are going to discuss everything step by step – how to set your target loudness level, how to monitor the loudness, and how you can use the automation feature.

Well, of course, have the program installed and opened. Then, add your video with the audio you want to edit or the audio separately, if that’s what you are aiming to do.

The first step you need to make is to set your target loudness level – for this, find the little settings button on the right bottom of the program and click on it. Now, go down to the Fairlight menu and change the Target Loudness Level. If you are doing the audio normalization for the Youtube content, then it is recommended to set it to -14 LUFS.

Next, you are going to head to the Fairlight page and make sure that your meters are open. the loudness meter is on the right top of the layout of the program, and it goes from +9 to -15 LUFS.

Here, zero represents exactly what our target loudness level is, in this case, as you remember, we set it to -14 LUFS. So, ensure that our loudness is as close as zero as possible on the meter, but you can also make it lower, such as -3. Whenever you play, you will be able to see that there are some numbers popping up to the right of the meter.

The first one, you’ll find, is Short – constantly changing, indicating how far above or below the target loudness level you are at a given time. Short Max tells you how far above or below your target loudness level the loudest point of your video is. Range is a measure of your quietest pick to your loudest peak, and the last one is Integrated – it gives you the overall loudness of your video in relation to your target loudness level. Integrated is the number we aim to keep around -3 or 0.

We can use our main slider (next to the sequence on the right) to make our video louder or quieter until we hit that target loudness level.

Also, there is an automation tool that can help you dial in your loudness. In order to access this feature, find a red icon, looking like a wave with kind of a key frames.

Next, open up your Index (on the far top panel, a little bit from the left), and make sure you are in the tracks menu in your editing index.

What you want to do is to make your main track visible on the timeline, so hit on the eyeball next to your main and go to your timeline, where you will expand your main track until you see your Loudness History options.

Here, you will need to check in the box next to Integrated and turn on the Loudness History. This will show the integrated loudness level, adjust your main track’s volume accordingly, so you are below the zero line. And, that’s actually it!

How to normalize audio in Wondershare Filmora X?

Even though doing this with the help of DaVinci Resolve is really helpful, and, let’s say, sophisticated, you might find it a little complicated, in case you were not so familiar with video/audio editing. So, we would like you to have some information about what alternative you can turn to, and in this case, it’s worth bringing up a software - Wondershare Filmora X . With it, you will find that the same task can be carried out wonderfully. It is also a video editor, but it is one of the easiest to use in the word, supported by Mac and Windows. Filmora offers a great, neat, user-friendly interface, and helps you understand the very basics of editing. Actually, it has not been long since Wondershare Filmora X introduced the feature to normalize the audio. So, you might want download the latest version of Filmora X and start following along the steps we are going to provide for you to understand how audio normalization works on Filmora X .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Free Download For macOS 10.14 or later

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

“Audacity Installation Made Easy: The Ultimate Chromebook Checklist”

Audacity has emerged as one of the greatest free audio editing tools for Mac, Linux, & Windows operating systems. With a wide range of capabilities and quality attributes, it is a basic and straightforward audio editing application. While Audacity for Chromebook and Chrome OS isn’t supported, does it imply you won’t be utilizing them in the future? Not at all.

A few simple steps are all that is needed to have Audacity for Chromebook installed on your Chromebook. First, let’s have a look at some of the features this device has to offer.

Features of Audacity for Chromebook

Audacity offers a wide range of editing features right inside its user-friendly interface, and it won’t hold back when it comes to personalization even if it costs nothing. Because it has built-in dithering and is superbly compatible with 32-bit/384kHz audio, it’s difficult to ignore this really effective open-source utility. Importing & mixing audio files is a breeze using Audacity, allowing you to combine stereo, mono, and even multitrack recordings. However, it’s worth noting that there are now just a few possibilities for the latter.

In addition, Audacity for Chromebook has low system requirements, to the point where it works even if your PC is able to power on. Using this editing program, you may mix and match multiple audio formats and sample rates to create a single, cohesive piece of work. In addition, when it comes to editing, you’ll enjoy the unparalleled ease of cutting, copying, and pasting, trimming to the sample level, duplicating, and even adding bespoke fades with the discretely introduced envelope tool.

Audacity seems to have all of the essential impacts. Whether you’re looking for preset EQ curves like those found on a telephone or an AM radio, or Bass and Treble improvements, this versatile program has you covered. With the Auto-Duck tool, you may add a voiceover and other essential features to a podcast, such as a compressor, limiter reverb, and phaser reverb. It’s an excellent choice if you don’t have a lot of extra requirements. Even if you don’t use it often, Audacity will be the last piece of editing software you ever buy.

Installing Audacity for Chromebook

Apps for Chromebooks are often downloaded through the Google Play Store approach. However, sinceAudacity for Chromebook does not support our low-power systems, we must go the other route. To put it another way, you’ll have to use Linux to get Audacity.

Linux is pre-installed on most Chromebooks, however, it is still in Beta. Go to the Settings menu and choose Enable from the drop-down menu to use this feature. Please go here for further information on how to enable Linux on your Chromebook. If your device has this wonderful function, you may follow the instructions below to properly install Audacity for Chromebook.

Open the Linux Terminal in the Launcher.

This is what you’ll see when you click on the Terminal.

To begin installing Audacity, enter the following command in the Terminal window that has already opened.

If you’ve done everything correctly up to this point, you’ll be able to enjoy the full benefits of the Linux operating system. What follows instead is a bewildering cacophony of bluster.

It seems that Linux is questioning whether or not you wish to proceed. To respond, use the “y” key on your keyboard.

This screenshot shows how the installation process is progressing.

Finally, you’ll notice the green-colored text at the finish of the orders. Your program has been successfully installed, as shown by this message.

It’s only a matter of selecting Audacity from the Launcher.

How to Uninstall Audacity

Just like installing it, Audacity can be uninstalled with a few clicks. For this, execute the command below in the Linux Terminal (and you can copy & paste it).

sudo apt remove audacity

When this is done on Linux, you’ll be asked whether you want to proceed with the uninstalling procedure or not. If you hit “y” the same way as previously, Audacity will be removed from your Chromebook in a matter of seconds.

A screenshot of Audacity in operation is here.

While recording your podcast using the built-in microphone on your Chromebook is a great way to start, it’s not the only way to fine-tune the final product. You must drag the track and sound to the center of the screen in order to begin the magic with this program. Once you’ve done this, you’ll be offered a variety of alternatives to get the editing process started.

Using Audacity for multitrack recording & editing is doable, but it’s best to use non-linear tools if primary focus is on that element. Apart from that, Audacity is widely regarded as one of the best audio editors on the market.

Conclusion

Your Chromebook may be able to run a variety of audio recording applications. As with Audacity, you won’t be limited in your ability to produce high-quality music with a wide range of unique effects. We also go through Filmora’s voice effects & how users may use them to change and improve their voices. Filmora allows you to re-voice video/audio & previously recorded voiceovers. For video/audio & voiceover files, the Pitch option on the Timeline may be used. Change the tone of a video and recording to make it sound different. You can quickly alter the voices in the videos using Filmora. Your viral should be accompanied by a story or a video. Using the Changing Pitch option, you may change the pitch of your voice. You may modify the pace of the video to change your voice (Optional). Make a duplicate of the video or audio that has been altered.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

This is what you’ll see when you click on the Terminal.

To begin installing Audacity, enter the following command in the Terminal window that has already opened.

If you’ve done everything correctly up to this point, you’ll be able to enjoy the full benefits of the Linux operating system. What follows instead is a bewildering cacophony of bluster.

It seems that Linux is questioning whether or not you wish to proceed. To respond, use the “y” key on your keyboard.

This screenshot shows how the installation process is progressing.

Finally, you’ll notice the green-colored text at the finish of the orders. Your program has been successfully installed, as shown by this message.

It’s only a matter of selecting Audacity from the Launcher.

How to Uninstall Audacity

Just like installing it, Audacity can be uninstalled with a few clicks. For this, execute the command below in the Linux Terminal (and you can copy & paste it).

sudo apt remove audacity

A screenshot of Audacity in operation is here.

Conclusion

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

This is what you’ll see when you click on the Terminal.

To begin installing Audacity, enter the following command in the Terminal window that has already opened.

If you’ve done everything correctly up to this point, you’ll be able to enjoy the full benefits of the Linux operating system. What follows instead is a bewildering cacophony of bluster.

It seems that Linux is questioning whether or not you wish to proceed. To respond, use the “y” key on your keyboard.

This screenshot shows how the installation process is progressing.

Finally, you’ll notice the green-colored text at the finish of the orders. Your program has been successfully installed, as shown by this message.

It’s only a matter of selecting Audacity from the Launcher.

How to Uninstall Audacity

Just like installing it, Audacity can be uninstalled with a few clicks. For this, execute the command below in the Linux Terminal (and you can copy & paste it).

sudo apt remove audacity

A screenshot of Audacity in operation is here.

Conclusion

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

This is what you’ll see when you click on the Terminal.

To begin installing Audacity, enter the following command in the Terminal window that has already opened.

If you’ve done everything correctly up to this point, you’ll be able to enjoy the full benefits of the Linux operating system. What follows instead is a bewildering cacophony of bluster.

It seems that Linux is questioning whether or not you wish to proceed. To respond, use the “y” key on your keyboard.

This screenshot shows how the installation process is progressing.

Finally, you’ll notice the green-colored text at the finish of the orders. Your program has been successfully installed, as shown by this message.

It’s only a matter of selecting Audacity from the Launcher.

How to Uninstall Audacity

Just like installing it, Audacity can be uninstalled with a few clicks. For this, execute the command below in the Linux Terminal (and you can copy & paste it).

sudo apt remove audacity

A screenshot of Audacity in operation is here.

Conclusion

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

HarmonySoft Masterclass: Exploring the Intricacies of AVS Editing Features, Customer Testimonials & Similar Products

You might have tried using the audio editor for fun. Have you ever tried using a fun kind of audio editor for both professional and non-professional purposes? We have an option for you! AVS Audio Editor is editing software that is used for fun as well as professional reasons. It is a great editor because of its features and ease of working.

You can use any audio editor to make your content better, but in this case of the article, we will be discussing AVS Audio Editor Software. Read the review and enjoy!

Part 1. AVS Audio Editor Product Details

What is AVS Audio Editor ? It is multi-functional audio editing software. You can use it to do basic editing like cut, paste, trim and merge different audio tracks. The editor allows the user to use multiple audio formats, including WMA, MP2, etc. AVS Audio Editor portable has a built-in audio equalizer which allows for editing volumes and performing Noise Reduction along with it.

AVS Audio Editor is also an audio recorder. It has around 20 effects and filters that the user can choose from. Moreover, you can use the AVS sound editor to extract audio from videos and use them for different purposes.

Operating System	Windows 7/10/11, Windows 8.x
Processor	Dual-Core (Intel i3 or AMD Equitant)
RAM	2GB or Higher
Video	Windows 7/10/11, Windows 8.x compatible video card
Sound	Windows 7/10/11, Windows 8.x compatible sound card
File Size	47.32 MB

Part 2. Key Features of AVS Audio Editor

AVS Audio Editor portable is a brilliant choice for editing and transforming your audio files. The reason behind this is the features and editing options that one can avail of from this editor. If you are not aware of much of its features, then this section will prove helpful for you. Let’s talk about some features that you can get from AVS Audio Editor.

· Editing Options

What diverse editing options do you get from AVS Audio Editor? Well, you can easily Trim, Cut, Join, Delete, Split audio files. Moreover, mixing different audio tracks and blending them is also offered by this editor.

· Effects

AVS editor is a great editing option because of the effects it offers. While editing with AVS Audio Editor, don’t forget to try its sound effects like Echo, Chorus, Reverb, etc. In addition to that, use its Remove Noise, Change Sound Bitrate, Equalizer options.

· View Options

Do you know how many different view options AVS Audio Editor offers? After you open the tool, head to the View section from the top menu bar, you will see 3 different view options. With AVS editor, view your files in Waveform, Spectral View, and also Envelope View.

Part 3. Pros and Cons of AVS Audio Editor

Now that you know about AVS Audio Editor and its features, are you excited to learn something else about it? Well, the following section of this article will shed light on the pros and cons that you get if you use this editor. Let’s start!

Benefits

If we talk about the ease of using this audio editor and its customer service quality, AVS Audio Editor is a 4-star audio editor.
Do you love to create your ringtones? For anyone who loves to use customized ringtones, try AVS Audio Editor portable.
This audio editor is perfect for enhancing audio quality, even from cassette tape recordings. Moreover, you can trim files with an AVS editor.
Want to know the best thing about AVS Audio Editor? It offers a Text-to-Speech feature where you can get the natural-sounding voice of your written text.

Drawback

The biggest downside of this audio editor is that AVS Audio Editor does not support Mac and Linux systems.

Part 4. How to Use AVS Audio Editor?

Do you have any idea how easy it is to use AVS Audio Editor? From easy editing, you can achieve audio files edited like professionals. If you are scared of using the editor for the first time, try these steps that are shared for your assistance. Let’s get started!

Step 1: Start by installing and launching the audio editor on your device. After that, you should import the media file. For that, tap on the ‘Open’ button to import from your device. Or else, you can also use the ‘Import from Video’ option.

Step 2: As soon as the file has been imported to the editor, you should start the editing by accessing the ‘Edit’ tab. Different editing options like audio cut, mix, etc., are offered by AVS audio editor, which you can easily avail. You can also convert sample type.

Step 3: Are you ready to know about the different effects that you get from this editor? Well, AVS editor provides some stunning options like Amplify, AutoCorrect, Noise Removal, Delete Silence, Normalize, Compress, and much more. Head to the ‘Effects’ tab to access these options.

Step 4: After the fun and all the editing is over, save the final file. You can either save by hitting on the ‘Save’ icon. Or else, the file can also be saved by tapping on the ‘File’ tab and selecting the ‘Save’ option.

Part 5. Alternatives for AVS Audio Editor

AVS Audio Editor might not be used by some people due to some issues. There are alternatives for this editor as well. We are discussing two different alternatives for AVS Audio Editor. The two discussed editors are the best options available in the market that can replace AVS editors.

MixPad Multitrack Recording Software

MixPad is an intuitive and easy audio editing software. You can use it on Windows and macOS supported devices. It can mix an unlimited number of audio and can record new audio as well. You can use pre-recorded tracks for editing and mixing purposes. It has a built-in library full of sound effects and music. MixPad supports uploading to social media platforms; along with that, it supports audio in multiple formats.

Adobe Audition

Adobe Audition is a top-notch audio editing software. You can use it for editing along with recording audio. It allows you to merge different tracks and remix them as per your needs. Audition also allows the users to restore and repair audios. You can use the editor to achieve professional finishing even if you are not a professional. Adobe Audition is a powerful software to work with.

Final Thoughts

After reading this detailed review on AVS Audio Editor, what have you learned? This article talked about the audio editor, its features, and a guideline for its steps has also been shared. If we ask you to name another great audio editor, can you? You probably don’t know about Wondershare Filmora Audio Editor if you can’t answer this question. Filmora is a great and powerful audio editor with so many different features.

If we talk about its features, you will never turn back to ordinary editors. The unmatched editor comes with features like Audio Ducking, Audio Equalizer, Audio Denoise, and so much more. You can name the feature, and Filmora has it. Some basic editing tools include Trim, Split, Cut, Adjust Audio, etc. You should surely look into this tool while managing your audio if you look forward to a seamless experience.

02 Key Features of AVS Audio Editor

03 Pros and Cons of AVS Audio Editor

04 How to Use AVS Audio Editor?

05 Alternatives for AVS Audio Editor

Part 1. AVS Audio Editor Product Details

Operating System	Windows 7/10/11, Windows 8.x
Processor	Dual-Core (Intel i3 or AMD Equitant)
RAM	2GB or Higher
Video	Windows 7/10/11, Windows 8.x compatible video card
Sound	Windows 7/10/11, Windows 8.x compatible sound card
File Size	47.32 MB