“Critical Picks: The 5 Most Accessible Harmonics Adjuster Tools”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

Click here

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Leading Internet MP3 Editing Solution

Online Audio & Mp3 Cutter, Audio Trimmer is a simple online tool which lets you trim your audio files on the fly. Choose your file and click Upload to get started! Uploaded files are stored in a temporary folder and automatically removed from the server within two hours.

It always makes me exciting that we can cut MP3 files and merge several parts into one file using those mp3 cutter and joiner software. For example, nowadays most people use MP3 cutter software to cut the best part of a song as their ringtones or cut the best part of many different songs and merge them into one song. And here’s a list of best free 8 mp3 cutter and joiner software recommend for you. These let you cut pieces of audio from audio files easily. These free software offer various features, like cutting MP3 audio files, fade in and fade out, choosing start point and end point, create ringtones for mobile phones from audio files, create various sound clips for presentations, making of audio books, making of jokes etc

Filmora Audio Recorder

Record computer system audio

Capture microphone audio

Customize recording volume

Record screen and webcam as well

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Also read: