A Filmmaker’s Guide to Blending Sound and Visuals with Magix Pro Software

How to add Audio to Video in Magix Movie Edit Pro

Shanoon Cox

Mar 27, 2024• Proven solutions

Having a perfect soundtrack to your videos is as important as having a perfectly captured footage, because the music and sounds you add to your videos, set the atmosphere of the video. Choosing the right music and atmospheric sounds to match the action taking place in the video is an important task that shouldn’t be taken lightly since the video’s reception by the audience depends on it. Failing to lip-sync or to add a knocking sound when someone is entering the room will reduce the realism of your film and break the illusion you tried so hard to create.

Let’s have a look at how you can add and remove audio files to video using Magix Movie Edit Pro video editing software.

How to add audio to video in Magix Movie Edit Pro

Before deciding to remove the audio file that was recorded together with the video clip, make sure that you already have sounds and music that will replace it. Having the audio recordings that match your video perfectly is of utmost importance because if you add files that don’t match the video the final result will be barely watchable.

1.Import the video clip and separate the video and audio

All video clips also contain an audio file, that isn’t displayed on the Magix Movie Edit Pro’s timeline until the two files are separated. In order to separate the audio and video file, you need to select the video file you placed on the timeline, by dragging it from the ‘Import’ tab and dropping it on the video track and then click on the ‘Ungroup’ icon on the editor’s timeline.

2.Remove and replace the files on the audio track

After clicking on the ‘Ungroup’ icon, you will be able to see an audio file on the editor’s audio track. If you would like to remove it from the project entirely, select the audio file and click on the ‘Delete’ button on your keyboard. However, if you would like to keep parts of the original audio track, select the file, place the playhead at the position in the file where you would like to make the cut and then click on the ‘Split objects’ icon on the toolbar. Repeat the same action at the position where you would like the sound file to end.

Adding new audio files to your project is simple, because all you need to do is head over to the ‘Import’ tab, locate the files you want to use in your video on your hard-drive and drag and drop them onto the audio track. Cut out the parts of the audio file you don’t want to use by clicking on the ‘’Split objects’ icon and make sure that the length of the audio matches the length of the video.

3.Edit the audio files

Magix Movie Edit Pro offers a large number of audio effects that can help you create a better soundtrack for your video. Click on the ‘Effects’ tab and slide down to the ‘Audio Effects’ section where you can adjust the volume, clean the background noises in the audio or apply some of many audio effects located under the ‘Audio Effects’ option. Additional audio effects can be purchased at the Magix Movie Edit Pro’s store, but some of the effects can be pricey for consumer-level video editors.

If you would like to merge the freshly created audio file with the video file after you applied all the audio effects you wanted, simply click on the ‘Group’ icon, located next to the ‘Ungroup’ icon on the editor’s toolbar.

Alternative Way of Adding Audio to a Video

Even though adding audio files to videos isn’t such a complicated process in Magix Movie Edit Pro, you might still consider using a video editing software that provides more options for audio editing. Wondershare Filmora will enable you to split, trim, add or remove audio files from your project in just a few simple steps. The software also gives you access to numerous royalty free music tracks that can be used in videos created with Filmora. Producing great visual content with Filmora video editing software is a simple process that can be completed in a short period of time, due to the abundance of the editing tools that make the editing process fast and easy.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Having a perfect soundtrack to your videos is as important as having a perfectly captured footage, because the music and sounds you add to your videos, set the atmosphere of the video. Choosing the right music and atmospheric sounds to match the action taking place in the video is an important task that shouldn’t be taken lightly since the video’s reception by the audience depends on it. Failing to lip-sync or to add a knocking sound when someone is entering the room will reduce the realism of your film and break the illusion you tried so hard to create.

Let’s have a look at how you can add and remove audio files to video using Magix Movie Edit Pro video editing software.

How to add audio to video in Magix Movie Edit Pro

Before deciding to remove the audio file that was recorded together with the video clip, make sure that you already have sounds and music that will replace it. Having the audio recordings that match your video perfectly is of utmost importance because if you add files that don’t match the video the final result will be barely watchable.

1.Import the video clip and separate the video and audio

All video clips also contain an audio file, that isn’t displayed on the Magix Movie Edit Pro’s timeline until the two files are separated. In order to separate the audio and video file, you need to select the video file you placed on the timeline, by dragging it from the ‘Import’ tab and dropping it on the video track and then click on the ‘Ungroup’ icon on the editor’s timeline.

2.Remove and replace the files on the audio track

After clicking on the ‘Ungroup’ icon, you will be able to see an audio file on the editor’s audio track. If you would like to remove it from the project entirely, select the audio file and click on the ‘Delete’ button on your keyboard. However, if you would like to keep parts of the original audio track, select the file, place the playhead at the position in the file where you would like to make the cut and then click on the ‘Split objects’ icon on the toolbar. Repeat the same action at the position where you would like the sound file to end.

Adding new audio files to your project is simple, because all you need to do is head over to the ‘Import’ tab, locate the files you want to use in your video on your hard-drive and drag and drop them onto the audio track. Cut out the parts of the audio file you don’t want to use by clicking on the ‘’Split objects’ icon and make sure that the length of the audio matches the length of the video.

3.Edit the audio files

Magix Movie Edit Pro offers a large number of audio effects that can help you create a better soundtrack for your video. Click on the ‘Effects’ tab and slide down to the ‘Audio Effects’ section where you can adjust the volume, clean the background noises in the audio or apply some of many audio effects located under the ‘Audio Effects’ option. Additional audio effects can be purchased at the Magix Movie Edit Pro’s store, but some of the effects can be pricey for consumer-level video editors.

If you would like to merge the freshly created audio file with the video file after you applied all the audio effects you wanted, simply click on the ‘Group’ icon, located next to the ‘Ungroup’ icon on the editor’s toolbar.

Alternative Way of Adding Audio to a Video

Even though adding audio files to videos isn’t such a complicated process in Magix Movie Edit Pro, you might still consider using a video editing software that provides more options for audio editing. Wondershare Filmora will enable you to split, trim, add or remove audio files from your project in just a few simple steps. The software also gives you access to numerous royalty free music tracks that can be used in videos created with Filmora. Producing great visual content with Filmora video editing software is a simple process that can be completed in a short period of time, due to the abundance of the editing tools that make the editing process fast and easy.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Having a perfect soundtrack to your videos is as important as having a perfectly captured footage, because the music and sounds you add to your videos, set the atmosphere of the video. Choosing the right music and atmospheric sounds to match the action taking place in the video is an important task that shouldn’t be taken lightly since the video’s reception by the audience depends on it. Failing to lip-sync or to add a knocking sound when someone is entering the room will reduce the realism of your film and break the illusion you tried so hard to create.

Let’s have a look at how you can add and remove audio files to video using Magix Movie Edit Pro video editing software.

How to add audio to video in Magix Movie Edit Pro

Before deciding to remove the audio file that was recorded together with the video clip, make sure that you already have sounds and music that will replace it. Having the audio recordings that match your video perfectly is of utmost importance because if you add files that don’t match the video the final result will be barely watchable.

1.Import the video clip and separate the video and audio

All video clips also contain an audio file, that isn’t displayed on the Magix Movie Edit Pro’s timeline until the two files are separated. In order to separate the audio and video file, you need to select the video file you placed on the timeline, by dragging it from the ‘Import’ tab and dropping it on the video track and then click on the ‘Ungroup’ icon on the editor’s timeline.

2.Remove and replace the files on the audio track

After clicking on the ‘Ungroup’ icon, you will be able to see an audio file on the editor’s audio track. If you would like to remove it from the project entirely, select the audio file and click on the ‘Delete’ button on your keyboard. However, if you would like to keep parts of the original audio track, select the file, place the playhead at the position in the file where you would like to make the cut and then click on the ‘Split objects’ icon on the toolbar. Repeat the same action at the position where you would like the sound file to end.

Adding new audio files to your project is simple, because all you need to do is head over to the ‘Import’ tab, locate the files you want to use in your video on your hard-drive and drag and drop them onto the audio track. Cut out the parts of the audio file you don’t want to use by clicking on the ‘’Split objects’ icon and make sure that the length of the audio matches the length of the video.

3.Edit the audio files

Magix Movie Edit Pro offers a large number of audio effects that can help you create a better soundtrack for your video. Click on the ‘Effects’ tab and slide down to the ‘Audio Effects’ section where you can adjust the volume, clean the background noises in the audio or apply some of many audio effects located under the ‘Audio Effects’ option. Additional audio effects can be purchased at the Magix Movie Edit Pro’s store, but some of the effects can be pricey for consumer-level video editors.

If you would like to merge the freshly created audio file with the video file after you applied all the audio effects you wanted, simply click on the ‘Group’ icon, located next to the ‘Ungroup’ icon on the editor’s toolbar.

Alternative Way of Adding Audio to a Video

Even though adding audio files to videos isn’t such a complicated process in Magix Movie Edit Pro, you might still consider using a video editing software that provides more options for audio editing. Wondershare Filmora will enable you to split, trim, add or remove audio files from your project in just a few simple steps. The software also gives you access to numerous royalty free music tracks that can be used in videos created with Filmora. Producing great visual content with Filmora video editing software is a simple process that can be completed in a short period of time, due to the abundance of the editing tools that make the editing process fast and easy.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Having a perfect soundtrack to your videos is as important as having a perfectly captured footage, because the music and sounds you add to your videos, set the atmosphere of the video. Choosing the right music and atmospheric sounds to match the action taking place in the video is an important task that shouldn’t be taken lightly since the video’s reception by the audience depends on it. Failing to lip-sync or to add a knocking sound when someone is entering the room will reduce the realism of your film and break the illusion you tried so hard to create.

Let’s have a look at how you can add and remove audio files to video using Magix Movie Edit Pro video editing software.

How to add audio to video in Magix Movie Edit Pro

Before deciding to remove the audio file that was recorded together with the video clip, make sure that you already have sounds and music that will replace it. Having the audio recordings that match your video perfectly is of utmost importance because if you add files that don’t match the video the final result will be barely watchable.

1.Import the video clip and separate the video and audio

All video clips also contain an audio file, that isn’t displayed on the Magix Movie Edit Pro’s timeline until the two files are separated. In order to separate the audio and video file, you need to select the video file you placed on the timeline, by dragging it from the ‘Import’ tab and dropping it on the video track and then click on the ‘Ungroup’ icon on the editor’s timeline.

2.Remove and replace the files on the audio track

After clicking on the ‘Ungroup’ icon, you will be able to see an audio file on the editor’s audio track. If you would like to remove it from the project entirely, select the audio file and click on the ‘Delete’ button on your keyboard. However, if you would like to keep parts of the original audio track, select the file, place the playhead at the position in the file where you would like to make the cut and then click on the ‘Split objects’ icon on the toolbar. Repeat the same action at the position where you would like the sound file to end.

Adding new audio files to your project is simple, because all you need to do is head over to the ‘Import’ tab, locate the files you want to use in your video on your hard-drive and drag and drop them onto the audio track. Cut out the parts of the audio file you don’t want to use by clicking on the ‘’Split objects’ icon and make sure that the length of the audio matches the length of the video.

3.Edit the audio files

Magix Movie Edit Pro offers a large number of audio effects that can help you create a better soundtrack for your video. Click on the ‘Effects’ tab and slide down to the ‘Audio Effects’ section where you can adjust the volume, clean the background noises in the audio or apply some of many audio effects located under the ‘Audio Effects’ option. Additional audio effects can be purchased at the Magix Movie Edit Pro’s store, but some of the effects can be pricey for consumer-level video editors.

If you would like to merge the freshly created audio file with the video file after you applied all the audio effects you wanted, simply click on the ‘Group’ icon, located next to the ‘Ungroup’ icon on the editor’s toolbar.

Alternative Way of Adding Audio to a Video

Even though adding audio files to videos isn’t such a complicated process in Magix Movie Edit Pro, you might still consider using a video editing software that provides more options for audio editing. Wondershare Filmora will enable you to split, trim, add or remove audio files from your project in just a few simple steps. The software also gives you access to numerous royalty free music tracks that can be used in videos created with Filmora. Producing great visual content with Filmora video editing software is a simple process that can be completed in a short period of time, due to the abundance of the editing tools that make the editing process fast and easy.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

“Achieving Clarity: Step-by-Step Tips to Dial Down Background Sound in Avid Media Composer”

Adobe Premiere Pro is a video editing tool. In the editing world, Premiere Pro has a separate fan base; people use this video editing tool because of its unmatchable features. People love the quality of editing that Premiere Pro delivers. Among its many features, few are color correction, safe margins, rulers, and audio assign.

Moreover, the video editor has an Auto Reframe feature. Along with this, Premiere Pro offers Comparison View and many other things. If you want to learn more about Premiere Pro and how to remove noise from video in Premiere Pro, then stay with us.

In this article

01 Remove Background Noise Premiere Pro

02 How to Mute A Clip in Premiere Pro

03 Tips and Tricks to Help You Better Editing Audio in Premiere Pro

Part 1. Remove Background Noise Premiere Pro

While recording a video, you cannot control every noise. Sometimes, you get disturbed by your doorbell. Sometimes, it’s your neighbor’s horn that might bother you or anything else. What do you do when this happens to you? Do you stop the recording and wait until it’s quiet?

If this is what you do, then let us share a smart solution with you. Background noise can be removed from your video using the remove background noise Premiere Pro feature. Allow us to share its steps to guide you more about it.

Step 1: Import the File

To remove background noise from your videos, you first need to import the media file to Premiere Pro. Then drag and drop the file onto the timeline. After that, you need to select and open the ‘Effects’ menu.

Step 2: Add Denoise Effect

On the right side of the Effects menu, type and search for ‘Denoise.’ Then, you should select the Denoise option and drag it onto the timeline over the media file. The Denoise feature removes nearly 50% of the noise automatically.

Step 3: Denoise Effects Control

The rest of the background noise can be customized. For that, head to the ‘Effects Control’ section. You will see Denoise-related options. There, click on ‘Edit’ for Custom Setup. You can adjust both the ‘Frequency’ and ‘Amount’ values.

Step 4: Voice Enhance Effect

Removing background noise damages the quality of voice. This quality can be improved by using ‘Vocal Enhance.’ You can search it from the search bar in the Effects tab and drag it over to the media file in the timeline. You can also customize this from the ‘Effects Control’ tab.

Part 2. How to Mute A Clip in Premiere Pro

Sometimes, you might need to mute a clip. You can use such clips as your status. You can also add your desired background music and then share the clips. In any case, you need to mute the clip, but what if you don’t know how to mute the clip in Premiere Pro?

Don’t worry because we are here to help you. The following section of this article will share different methods to mute clips in Adobe Premiere Pro.

Method 1: The first method is to mute an entire clip on the timeline. This could be done by checking the Mute Track ‘M’ button. You will find the mute button beside the track name.

Method 2: The next method is to mute a specific clip. For that, go to the ‘Audio’ section from the menu bar. Then, look at the ‘Essential Sound’ panel on the right side of the screen. From you will see various tags. Open your desired tag and check the box against the ‘Mute’ option.

Method 3: Another method that could be used to mute a clip is by right-clicking on the clip that you want to mute. A menu appears on the screen. From that menu, you need to uncheck the ‘Enable’ button. This mutes the clip.

Method 4: The next method demands you to first select the video clip. Then, from the menu bar, head over to the ‘Editing’ tab. There go to the ‘Audio Clip Mixer’ section. You will see volume sliders; drag down the Volume slider to negative to mute the clip.

Part 3. Tips and Tricks to Help You Better Editing Audio in Premiere Pro

As we have mentioned earlier, noise removal damages the overall quality of the audio. All your effort goes to waste if your voice is not clear or anything else. Now that you know how you can handle background noise removal, it’s time to talk about something new and different.

The following section of this article is going to share tips and tricks that could be adopted. These will help you to get better and improved quality while editing audio.

1. Restore Bass

The first tip that we are going to introduce is restoring the bass of the media file. You can do this by using the Parametric Equalizer and dragging it onto the timeline. With an equalizer, you can play with different audio frequencies. Whatsoever suits the best, you can set it.

2. Atmosphere Setting

Its essential to first of all create an atmosphere. For this, you can mix sounds, add reverb and even adjust the loudness. An ambiance audio tag can be used for background noise. You need to set the scene for your music or the dialogue.

3. Compress the Audio

To make the audio better and more consistent, it is essential to compress it. Like the name is presenting, compression lowers the volume of loud parts, increases the volume of fairly quiet parts, it compresses the waveform of audio. After compression, your audio sounds instantly better, especially the voices.

4. Dialogue Adjustments

You can unify different recordings for a common loudness if you tag audio clips as Dialogue. If you plan to add a voiceover to your video, then you must improve the clarity, reduce or remove any background noise and also, adjust the reverb. Subtitles could be added to make the conversation understandable in your video.

5. Remove Noise

The noise of the computer fan or the weird hissing noise of the microphone and other similar things are referred to as Background noise. This can become a distracting element. While editing the audio, it matters that you remove the background noise because it does not get automatically removed. So, to have good audio, always remove background noise.

Bottom Line

If background noise is bothering you, then this problem is resolved. The article above has shared how to remove noise from video in premiere pro. The easy step-by-step guide for removing background noise with Premiere Pro has been shared.

To remove background noise, Premiere Pro is not the only editor. Wondershare Filmora is another stunning and known video editor. You can use the tool to remove background noise from your videos. With this editor, you can also mute your clips.

Not just this, but the editor has many more classic features. Filmora allows keyframing, motion tracking, and doing cool edits with a split-screen. Color match is another offered feature among the many other features of Filmora. It also has an asset library. You can get fantastic effects, transitions, elements, and whatnot from its library.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Mute A Clip in Premiere Pro

03 Tips and Tricks to Help You Better Editing Audio in Premiere Pro

Part 1. Remove Background Noise Premiere Pro

While recording a video, you cannot control every noise. Sometimes, you get disturbed by your doorbell. Sometimes, it’s your neighbor’s horn that might bother you or anything else. What do you do when this happens to you? Do you stop the recording and wait until it’s quiet?

If this is what you do, then let us share a smart solution with you. Background noise can be removed from your video using the remove background noise Premiere Pro feature. Allow us to share its steps to guide you more about it.

Step 1: Import the File

To remove background noise from your videos, you first need to import the media file to Premiere Pro. Then drag and drop the file onto the timeline. After that, you need to select and open the ‘Effects’ menu.

Step 2: Add Denoise Effect

On the right side of the Effects menu, type and search for ‘Denoise.’ Then, you should select the Denoise option and drag it onto the timeline over the media file. The Denoise feature removes nearly 50% of the noise automatically.

Step 3: Denoise Effects Control

The rest of the background noise can be customized. For that, head to the ‘Effects Control’ section. You will see Denoise-related options. There, click on ‘Edit’ for Custom Setup. You can adjust both the ‘Frequency’ and ‘Amount’ values.

Step 4: Voice Enhance Effect

Removing background noise damages the quality of voice. This quality can be improved by using ‘Vocal Enhance.’ You can search it from the search bar in the Effects tab and drag it over to the media file in the timeline. You can also customize this from the ‘Effects Control’ tab.

Part 2. How to Mute A Clip in Premiere Pro

Sometimes, you might need to mute a clip. You can use such clips as your status. You can also add your desired background music and then share the clips. In any case, you need to mute the clip, but what if you don’t know how to mute the clip in Premiere Pro?

Don’t worry because we are here to help you. The following section of this article will share different methods to mute clips in Adobe Premiere Pro.

Method 1: The first method is to mute an entire clip on the timeline. This could be done by checking the Mute Track ‘M’ button. You will find the mute button beside the track name.

Method 2: The next method is to mute a specific clip. For that, go to the ‘Audio’ section from the menu bar. Then, look at the ‘Essential Sound’ panel on the right side of the screen. From you will see various tags. Open your desired tag and check the box against the ‘Mute’ option.

Method 3: Another method that could be used to mute a clip is by right-clicking on the clip that you want to mute. A menu appears on the screen. From that menu, you need to uncheck the ‘Enable’ button. This mutes the clip.

Method 4: The next method demands you to first select the video clip. Then, from the menu bar, head over to the ‘Editing’ tab. There go to the ‘Audio Clip Mixer’ section. You will see volume sliders; drag down the Volume slider to negative to mute the clip.

Part 3. Tips and Tricks to Help You Better Editing Audio in Premiere Pro

As we have mentioned earlier, noise removal damages the overall quality of the audio. All your effort goes to waste if your voice is not clear or anything else. Now that you know how you can handle background noise removal, it’s time to talk about something new and different.

The following section of this article is going to share tips and tricks that could be adopted. These will help you to get better and improved quality while editing audio.

1. Restore Bass

The first tip that we are going to introduce is restoring the bass of the media file. You can do this by using the Parametric Equalizer and dragging it onto the timeline. With an equalizer, you can play with different audio frequencies. Whatsoever suits the best, you can set it.

2. Atmosphere Setting

Its essential to first of all create an atmosphere. For this, you can mix sounds, add reverb and even adjust the loudness. An ambiance audio tag can be used for background noise. You need to set the scene for your music or the dialogue.

3. Compress the Audio

To make the audio better and more consistent, it is essential to compress it. Like the name is presenting, compression lowers the volume of loud parts, increases the volume of fairly quiet parts, it compresses the waveform of audio. After compression, your audio sounds instantly better, especially the voices.

4. Dialogue Adjustments

You can unify different recordings for a common loudness if you tag audio clips as Dialogue. If you plan to add a voiceover to your video, then you must improve the clarity, reduce or remove any background noise and also, adjust the reverb. Subtitles could be added to make the conversation understandable in your video.

5. Remove Noise

The noise of the computer fan or the weird hissing noise of the microphone and other similar things are referred to as Background noise. This can become a distracting element. While editing the audio, it matters that you remove the background noise because it does not get automatically removed. So, to have good audio, always remove background noise.

Bottom Line

If background noise is bothering you, then this problem is resolved. The article above has shared how to remove noise from video in premiere pro. The easy step-by-step guide for removing background noise with Premiere Pro has been shared.

To remove background noise, Premiere Pro is not the only editor. Wondershare Filmora is another stunning and known video editor. You can use the tool to remove background noise from your videos. With this editor, you can also mute your clips.

Not just this, but the editor has many more classic features. Filmora allows keyframing, motion tracking, and doing cool edits with a split-screen. Color match is another offered feature among the many other features of Filmora. It also has an asset library. You can get fantastic effects, transitions, elements, and whatnot from its library.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Mute A Clip in Premiere Pro

03 Tips and Tricks to Help You Better Editing Audio in Premiere Pro

Part 1. Remove Background Noise Premiere Pro

While recording a video, you cannot control every noise. Sometimes, you get disturbed by your doorbell. Sometimes, it’s your neighbor’s horn that might bother you or anything else. What do you do when this happens to you? Do you stop the recording and wait until it’s quiet?

If this is what you do, then let us share a smart solution with you. Background noise can be removed from your video using the remove background noise Premiere Pro feature. Allow us to share its steps to guide you more about it.

Step 1: Import the File

To remove background noise from your videos, you first need to import the media file to Premiere Pro. Then drag and drop the file onto the timeline. After that, you need to select and open the ‘Effects’ menu.

Step 2: Add Denoise Effect

On the right side of the Effects menu, type and search for ‘Denoise.’ Then, you should select the Denoise option and drag it onto the timeline over the media file. The Denoise feature removes nearly 50% of the noise automatically.

Step 3: Denoise Effects Control

The rest of the background noise can be customized. For that, head to the ‘Effects Control’ section. You will see Denoise-related options. There, click on ‘Edit’ for Custom Setup. You can adjust both the ‘Frequency’ and ‘Amount’ values.

Step 4: Voice Enhance Effect

Removing background noise damages the quality of voice. This quality can be improved by using ‘Vocal Enhance.’ You can search it from the search bar in the Effects tab and drag it over to the media file in the timeline. You can also customize this from the ‘Effects Control’ tab.

Part 2. How to Mute A Clip in Premiere Pro

Sometimes, you might need to mute a clip. You can use such clips as your status. You can also add your desired background music and then share the clips. In any case, you need to mute the clip, but what if you don’t know how to mute the clip in Premiere Pro?

Don’t worry because we are here to help you. The following section of this article will share different methods to mute clips in Adobe Premiere Pro.

Method 1: The first method is to mute an entire clip on the timeline. This could be done by checking the Mute Track ‘M’ button. You will find the mute button beside the track name.

Method 2: The next method is to mute a specific clip. For that, go to the ‘Audio’ section from the menu bar. Then, look at the ‘Essential Sound’ panel on the right side of the screen. From you will see various tags. Open your desired tag and check the box against the ‘Mute’ option.

Method 3: Another method that could be used to mute a clip is by right-clicking on the clip that you want to mute. A menu appears on the screen. From that menu, you need to uncheck the ‘Enable’ button. This mutes the clip.

Method 4: The next method demands you to first select the video clip. Then, from the menu bar, head over to the ‘Editing’ tab. There go to the ‘Audio Clip Mixer’ section. You will see volume sliders; drag down the Volume slider to negative to mute the clip.

Part 3. Tips and Tricks to Help You Better Editing Audio in Premiere Pro

As we have mentioned earlier, noise removal damages the overall quality of the audio. All your effort goes to waste if your voice is not clear or anything else. Now that you know how you can handle background noise removal, it’s time to talk about something new and different.

The following section of this article is going to share tips and tricks that could be adopted. These will help you to get better and improved quality while editing audio.

1. Restore Bass

The first tip that we are going to introduce is restoring the bass of the media file. You can do this by using the Parametric Equalizer and dragging it onto the timeline. With an equalizer, you can play with different audio frequencies. Whatsoever suits the best, you can set it.

2. Atmosphere Setting

Its essential to first of all create an atmosphere. For this, you can mix sounds, add reverb and even adjust the loudness. An ambiance audio tag can be used for background noise. You need to set the scene for your music or the dialogue.

3. Compress the Audio

To make the audio better and more consistent, it is essential to compress it. Like the name is presenting, compression lowers the volume of loud parts, increases the volume of fairly quiet parts, it compresses the waveform of audio. After compression, your audio sounds instantly better, especially the voices.

4. Dialogue Adjustments

You can unify different recordings for a common loudness if you tag audio clips as Dialogue. If you plan to add a voiceover to your video, then you must improve the clarity, reduce or remove any background noise and also, adjust the reverb. Subtitles could be added to make the conversation understandable in your video.

5. Remove Noise

The noise of the computer fan or the weird hissing noise of the microphone and other similar things are referred to as Background noise. This can become a distracting element. While editing the audio, it matters that you remove the background noise because it does not get automatically removed. So, to have good audio, always remove background noise.

Bottom Line

If background noise is bothering you, then this problem is resolved. The article above has shared how to remove noise from video in premiere pro. The easy step-by-step guide for removing background noise with Premiere Pro has been shared.

To remove background noise, Premiere Pro is not the only editor. Wondershare Filmora is another stunning and known video editor. You can use the tool to remove background noise from your videos. With this editor, you can also mute your clips.

Not just this, but the editor has many more classic features. Filmora allows keyframing, motion tracking, and doing cool edits with a split-screen. Color match is another offered feature among the many other features of Filmora. It also has an asset library. You can get fantastic effects, transitions, elements, and whatnot from its library.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Mute A Clip in Premiere Pro

03 Tips and Tricks to Help You Better Editing Audio in Premiere Pro

Part 1. Remove Background Noise Premiere Pro

While recording a video, you cannot control every noise. Sometimes, you get disturbed by your doorbell. Sometimes, it’s your neighbor’s horn that might bother you or anything else. What do you do when this happens to you? Do you stop the recording and wait until it’s quiet?

If this is what you do, then let us share a smart solution with you. Background noise can be removed from your video using the remove background noise Premiere Pro feature. Allow us to share its steps to guide you more about it.

Step 1: Import the File

To remove background noise from your videos, you first need to import the media file to Premiere Pro. Then drag and drop the file onto the timeline. After that, you need to select and open the ‘Effects’ menu.

Step 2: Add Denoise Effect

On the right side of the Effects menu, type and search for ‘Denoise.’ Then, you should select the Denoise option and drag it onto the timeline over the media file. The Denoise feature removes nearly 50% of the noise automatically.

Step 3: Denoise Effects Control

The rest of the background noise can be customized. For that, head to the ‘Effects Control’ section. You will see Denoise-related options. There, click on ‘Edit’ for Custom Setup. You can adjust both the ‘Frequency’ and ‘Amount’ values.

Step 4: Voice Enhance Effect

Removing background noise damages the quality of voice. This quality can be improved by using ‘Vocal Enhance.’ You can search it from the search bar in the Effects tab and drag it over to the media file in the timeline. You can also customize this from the ‘Effects Control’ tab.

Part 2. How to Mute A Clip in Premiere Pro

Sometimes, you might need to mute a clip. You can use such clips as your status. You can also add your desired background music and then share the clips. In any case, you need to mute the clip, but what if you don’t know how to mute the clip in Premiere Pro?

Don’t worry because we are here to help you. The following section of this article will share different methods to mute clips in Adobe Premiere Pro.

Method 1: The first method is to mute an entire clip on the timeline. This could be done by checking the Mute Track ‘M’ button. You will find the mute button beside the track name.

Method 2: The next method is to mute a specific clip. For that, go to the ‘Audio’ section from the menu bar. Then, look at the ‘Essential Sound’ panel on the right side of the screen. From you will see various tags. Open your desired tag and check the box against the ‘Mute’ option.

Method 3: Another method that could be used to mute a clip is by right-clicking on the clip that you want to mute. A menu appears on the screen. From that menu, you need to uncheck the ‘Enable’ button. This mutes the clip.

Method 4: The next method demands you to first select the video clip. Then, from the menu bar, head over to the ‘Editing’ tab. There go to the ‘Audio Clip Mixer’ section. You will see volume sliders; drag down the Volume slider to negative to mute the clip.

Part 3. Tips and Tricks to Help You Better Editing Audio in Premiere Pro

As we have mentioned earlier, noise removal damages the overall quality of the audio. All your effort goes to waste if your voice is not clear or anything else. Now that you know how you can handle background noise removal, it’s time to talk about something new and different.

The following section of this article is going to share tips and tricks that could be adopted. These will help you to get better and improved quality while editing audio.

1. Restore Bass

The first tip that we are going to introduce is restoring the bass of the media file. You can do this by using the Parametric Equalizer and dragging it onto the timeline. With an equalizer, you can play with different audio frequencies. Whatsoever suits the best, you can set it.

2. Atmosphere Setting

Its essential to first of all create an atmosphere. For this, you can mix sounds, add reverb and even adjust the loudness. An ambiance audio tag can be used for background noise. You need to set the scene for your music or the dialogue.

3. Compress the Audio

To make the audio better and more consistent, it is essential to compress it. Like the name is presenting, compression lowers the volume of loud parts, increases the volume of fairly quiet parts, it compresses the waveform of audio. After compression, your audio sounds instantly better, especially the voices.

4. Dialogue Adjustments

You can unify different recordings for a common loudness if you tag audio clips as Dialogue. If you plan to add a voiceover to your video, then you must improve the clarity, reduce or remove any background noise and also, adjust the reverb. Subtitles could be added to make the conversation understandable in your video.

5. Remove Noise

The noise of the computer fan or the weird hissing noise of the microphone and other similar things are referred to as Background noise. This can become a distracting element. While editing the audio, it matters that you remove the background noise because it does not get automatically removed. So, to have good audio, always remove background noise.

Bottom Line

If background noise is bothering you, then this problem is resolved. The article above has shared how to remove noise from video in premiere pro. The easy step-by-step guide for removing background noise with Premiere Pro has been shared.

To remove background noise, Premiere Pro is not the only editor. Wondershare Filmora is another stunning and known video editor. You can use the tool to remove background noise from your videos. With this editor, you can also mute your clips.

Not just this, but the editor has many more classic features. Filmora allows keyframing, motion tracking, and doing cool edits with a split-screen. Color match is another offered feature among the many other features of Filmora. It also has an asset library. You can get fantastic effects, transitions, elements, and whatnot from its library.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

“Turn Off Sounds & Import Unique Music for Windows Movie Editor”

How to Mute Audio in Windows Movie Maker?

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: