“A Curated Selection of Freely Available Sound Pressure Balancers”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Mastering the Art of Detaching Sound From Visuals in Adobe Premiere Pro

Are you into the creative industry? Do you need to detach audio from a video? Are you a fan of Premiere Pro?

With the media industry progressing, advanced features are on the rise. Each upgrade is for the creator’s ease. The well-developed functions limit the stress at the workplace. Don’t you agree? The media production needs to detach audio from video. It is essential to censor audio out or eliminate unwanted background noise.

Most often, audio has to be detached for B-roll. One can detach audio Premiere Pro effortlessly. The article covers the procedure to extract and separate audio from a video. We shall also have a preview of Filmora. So, what are we waiting for? Let us commence this!

In this article

01 How Can You Extract, Separate, or Detach Audio from Video? [Premiere Pro]

02 Tips to Detach or Remove Audio From Video in Filmora

Part 1: How Can You Extract, Separate, or Detach Audio from Video? [Premiere Pro]

Premiere Pro detaches audio flawlessly. Adobe Premiere Pro is a video editing software. With creative tools, a flexible interface, and powerful capabilities, Premiere Pro turns your raw footage into something extraordinary. It enables you to perform color grading, color correction, and transitions effectively. The largest toolset has made life bearable for creators.

Additionally, Adobe Premiere Pro has an excellent range of collaboration tools. There are learning tools to guide the beginner towards a successful process. These tutorials have assisted the user in performing basic operations productively. The refined video editing tools have created a revolution in the market. The Auto Reframe feature changes the crop selection by keeping the attention where it is due.

Are you invested in detaching the audio process? Worry no more as we have got you. Premiere Pro doesn’t leave its users empty-handed. Audio extraction and separation both would be included in this section.

Audio Extraction Process

The audio extraction procedure is a great way to lubricate the editing process. The audio is extracted to add new audio master clips in this phenomenon. The channel mapping, duration, gain, speed, and footage adjustment are applied to the extracted clips. The original content remains preserved.

Before detaching audio, let us shift our focus to extracting it. So, are you with us? Follow the step-by-step below to extract audio from the video.

Step 1: Launching Premiere Pro

Open Adobe Premiere Pro. Press ‘New Project’ from the interface that appears. The default settings are good to go. However, make sure that the output location is appropriate. Hit ‘OK.’

Step 2: Importing the Clips

Now, click on ‘Media Browser’ from the middle panel. Import the targeted video clips to initiate the process. Select the videos whose audio has to be extracted. Head to the ‘Clip’ section and choose ‘Audio Options.’ Hit ‘Extract Audio’ afterward.

Step 3: File Extraction

In a couple of seconds, Premiere Pro creates duplicate audio files. The original video clips are not affected in any way. Moving on, let us move on to export the extracted audio clips.

Step 4: Exporting Process

Mark in and out points on your sequence for the session you wish to export. Mute the rest of the tracks. Now, navigate to the ‘File,’ press ‘Export,’ and then ‘Media.’ For encoding format, choose between MP3 and WAV form audio based on the original file format. Choose the output location. Hit ‘Export,’ and you are done.

Audio Detaching Process

Similarly, audio separation is another way to access a part of the audio. It permits you to use any audio section and make necessary edits to it. To detach audio in Premiere Pro, kindly follow the guidelines below.

Step 1: Importing the Media Files

Launch Premiere Pro from your computer. The interface opens up in seconds. The user is recommended to browse the targeted video with attached audio. Add it to the timeline of the Premiere Pro.

Step 2: Unlinking Process

After that, right-click on the clip. Choose ‘Unlink’ from the list of options that appear. The user can easily select and edit both the audio and video content. However, you can also separate audio using another faster process.

Step 3: Deleting Process

Hold down the ALT key from your keyboard and click on the audio clip to do this more effectively. Use the ‘Delete’ button and get rid of it once and for all. Now, make necessary edits, and you are done for the day!

Part 2: Tips to Detach or Remove Audio From Video in Filmora

Wondershare Filmora needs no introduction. Filmora has always had something refined to offer in a world full of video editors. Wouldn’t you agree? A content creator needs a video editing tool with an interactive interface with balanced functions.

Filmora knows different tricks to keep creative professionals invested in it. From keyframing to motion tracking and green screen to color matching, Wondershare Filmora wouldn’t disappoint you. The optimized GPU detection brings productivity to work. As far as audio editing is concerned, Filmora has advanced tools on the go.

The audio equalizer and audio mixer fine-tune the music and adjust the audio of separate tracks, respectively. You can split audio, adjust the audio volume, and perform audio ducking. The creative creators can also add a voiceover and trim the clips. The original audio of the video can also be replaced technically. Isn’t that the whole dream?

In short, Filmora has everything under one platform. There is no need to download extensive video editors for each functionality.

Moving on to the section, we shall discuss the procedure to detach or remove audio using this exceptional tool. So, let us try this!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Browsing the Video

Download Wondershare Filmora in your system. Launch it as soon as the process is concluded. Import the targeted video files into the program. Drag the video from the library onto the timeline.

Step 2: Removing Audio

To remove the audio, right-click on the video file from the timeline. Click on ‘Detach audio’ from the options that appear. The audio file is separated from the video file. It is displayed in another track below the video track.

Step 3: Final Process

Now, the user is free to make edits to the audio and perform modifications as deemed necessary. Delete the separated audio track if you wish to add a new voiceover or audio in the background. You can do so by clicking on the trash button above the timeline.

Conclusion

The raw videos undergo treatment to look ravishing. Don’t you think? Without the needed editing, these videos wouldn’t stand anywhere. After the original audio is detached, a better message is expressed to replace it with promising content.

The article introduced Premiere Pro. Moreover, how to detach audio from video Premiere Pro was also discussed in detail. If you want to extract audio from video, this write-up will help you. Wondershare Filmora is a video editing software with great tools to get the trick done in seconds.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 Tips to Detach or Remove Audio From Video in Filmora

Part 1: How Can You Extract, Separate, or Detach Audio from Video? [Premiere Pro]

Premiere Pro detaches audio flawlessly. Adobe Premiere Pro is a video editing software. With creative tools, a flexible interface, and powerful capabilities, Premiere Pro turns your raw footage into something extraordinary. It enables you to perform color grading, color correction, and transitions effectively. The largest toolset has made life bearable for creators.

Additionally, Adobe Premiere Pro has an excellent range of collaboration tools. There are learning tools to guide the beginner towards a successful process. These tutorials have assisted the user in performing basic operations productively. The refined video editing tools have created a revolution in the market. The Auto Reframe feature changes the crop selection by keeping the attention where it is due.

Are you invested in detaching the audio process? Worry no more as we have got you. Premiere Pro doesn’t leave its users empty-handed. Audio extraction and separation both would be included in this section.

Audio Extraction Process

The audio extraction procedure is a great way to lubricate the editing process. The audio is extracted to add new audio master clips in this phenomenon. The channel mapping, duration, gain, speed, and footage adjustment are applied to the extracted clips. The original content remains preserved.

Before detaching audio, let us shift our focus to extracting it. So, are you with us? Follow the step-by-step below to extract audio from the video.

Step 1: Launching Premiere Pro

Open Adobe Premiere Pro. Press ‘New Project’ from the interface that appears. The default settings are good to go. However, make sure that the output location is appropriate. Hit ‘OK.’

Step 2: Importing the Clips

Now, click on ‘Media Browser’ from the middle panel. Import the targeted video clips to initiate the process. Select the videos whose audio has to be extracted. Head to the ‘Clip’ section and choose ‘Audio Options.’ Hit ‘Extract Audio’ afterward.

Step 3: File Extraction

In a couple of seconds, Premiere Pro creates duplicate audio files. The original video clips are not affected in any way. Moving on, let us move on to export the extracted audio clips.

Step 4: Exporting Process

Mark in and out points on your sequence for the session you wish to export. Mute the rest of the tracks. Now, navigate to the ‘File,’ press ‘Export,’ and then ‘Media.’ For encoding format, choose between MP3 and WAV form audio based on the original file format. Choose the output location. Hit ‘Export,’ and you are done.

Audio Detaching Process

Similarly, audio separation is another way to access a part of the audio. It permits you to use any audio section and make necessary edits to it. To detach audio in Premiere Pro, kindly follow the guidelines below.

Step 1: Importing the Media Files

Launch Premiere Pro from your computer. The interface opens up in seconds. The user is recommended to browse the targeted video with attached audio. Add it to the timeline of the Premiere Pro.

Step 2: Unlinking Process

After that, right-click on the clip. Choose ‘Unlink’ from the list of options that appear. The user can easily select and edit both the audio and video content. However, you can also separate audio using another faster process.

Step 3: Deleting Process

Hold down the ALT key from your keyboard and click on the audio clip to do this more effectively. Use the ‘Delete’ button and get rid of it once and for all. Now, make necessary edits, and you are done for the day!

Part 2: Tips to Detach or Remove Audio From Video in Filmora

Wondershare Filmora needs no introduction. Filmora has always had something refined to offer in a world full of video editors. Wouldn’t you agree? A content creator needs a video editing tool with an interactive interface with balanced functions.

Filmora knows different tricks to keep creative professionals invested in it. From keyframing to motion tracking and green screen to color matching, Wondershare Filmora wouldn’t disappoint you. The optimized GPU detection brings productivity to work. As far as audio editing is concerned, Filmora has advanced tools on the go.

The audio equalizer and audio mixer fine-tune the music and adjust the audio of separate tracks, respectively. You can split audio, adjust the audio volume, and perform audio ducking. The creative creators can also add a voiceover and trim the clips. The original audio of the video can also be replaced technically. Isn’t that the whole dream?

In short, Filmora has everything under one platform. There is no need to download extensive video editors for each functionality.

Moving on to the section, we shall discuss the procedure to detach or remove audio using this exceptional tool. So, let us try this!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Browsing the Video

Download Wondershare Filmora in your system. Launch it as soon as the process is concluded. Import the targeted video files into the program. Drag the video from the library onto the timeline.

Step 2: Removing Audio

To remove the audio, right-click on the video file from the timeline. Click on ‘Detach audio’ from the options that appear. The audio file is separated from the video file. It is displayed in another track below the video track.

Step 3: Final Process

Now, the user is free to make edits to the audio and perform modifications as deemed necessary. Delete the separated audio track if you wish to add a new voiceover or audio in the background. You can do so by clicking on the trash button above the timeline.

Conclusion

The raw videos undergo treatment to look ravishing. Don’t you think? Without the needed editing, these videos wouldn’t stand anywhere. After the original audio is detached, a better message is expressed to replace it with promising content.

The article introduced Premiere Pro. Moreover, how to detach audio from video Premiere Pro was also discussed in detail. If you want to extract audio from video, this write-up will help you. Wondershare Filmora is a video editing software with great tools to get the trick done in seconds.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 Tips to Detach or Remove Audio From Video in Filmora

Part 1: How Can You Extract, Separate, or Detach Audio from Video? [Premiere Pro]

Premiere Pro detaches audio flawlessly. Adobe Premiere Pro is a video editing software. With creative tools, a flexible interface, and powerful capabilities, Premiere Pro turns your raw footage into something extraordinary. It enables you to perform color grading, color correction, and transitions effectively. The largest toolset has made life bearable for creators.

Additionally, Adobe Premiere Pro has an excellent range of collaboration tools. There are learning tools to guide the beginner towards a successful process. These tutorials have assisted the user in performing basic operations productively. The refined video editing tools have created a revolution in the market. The Auto Reframe feature changes the crop selection by keeping the attention where it is due.

Are you invested in detaching the audio process? Worry no more as we have got you. Premiere Pro doesn’t leave its users empty-handed. Audio extraction and separation both would be included in this section.

Audio Extraction Process

The audio extraction procedure is a great way to lubricate the editing process. The audio is extracted to add new audio master clips in this phenomenon. The channel mapping, duration, gain, speed, and footage adjustment are applied to the extracted clips. The original content remains preserved.

Before detaching audio, let us shift our focus to extracting it. So, are you with us? Follow the step-by-step below to extract audio from the video.

Step 1: Launching Premiere Pro

Open Adobe Premiere Pro. Press ‘New Project’ from the interface that appears. The default settings are good to go. However, make sure that the output location is appropriate. Hit ‘OK.’

Step 2: Importing the Clips

Now, click on ‘Media Browser’ from the middle panel. Import the targeted video clips to initiate the process. Select the videos whose audio has to be extracted. Head to the ‘Clip’ section and choose ‘Audio Options.’ Hit ‘Extract Audio’ afterward.

Step 3: File Extraction

In a couple of seconds, Premiere Pro creates duplicate audio files. The original video clips are not affected in any way. Moving on, let us move on to export the extracted audio clips.

Step 4: Exporting Process

Mark in and out points on your sequence for the session you wish to export. Mute the rest of the tracks. Now, navigate to the ‘File,’ press ‘Export,’ and then ‘Media.’ For encoding format, choose between MP3 and WAV form audio based on the original file format. Choose the output location. Hit ‘Export,’ and you are done.

Audio Detaching Process

Similarly, audio separation is another way to access a part of the audio. It permits you to use any audio section and make necessary edits to it. To detach audio in Premiere Pro, kindly follow the guidelines below.

Step 1: Importing the Media Files

Launch Premiere Pro from your computer. The interface opens up in seconds. The user is recommended to browse the targeted video with attached audio. Add it to the timeline of the Premiere Pro.

Step 2: Unlinking Process

After that, right-click on the clip. Choose ‘Unlink’ from the list of options that appear. The user can easily select and edit both the audio and video content. However, you can also separate audio using another faster process.

Step 3: Deleting Process

Hold down the ALT key from your keyboard and click on the audio clip to do this more effectively. Use the ‘Delete’ button and get rid of it once and for all. Now, make necessary edits, and you are done for the day!

Part 2: Tips to Detach or Remove Audio From Video in Filmora

Wondershare Filmora needs no introduction. Filmora has always had something refined to offer in a world full of video editors. Wouldn’t you agree? A content creator needs a video editing tool with an interactive interface with balanced functions.

Filmora knows different tricks to keep creative professionals invested in it. From keyframing to motion tracking and green screen to color matching, Wondershare Filmora wouldn’t disappoint you. The optimized GPU detection brings productivity to work. As far as audio editing is concerned, Filmora has advanced tools on the go.

The audio equalizer and audio mixer fine-tune the music and adjust the audio of separate tracks, respectively. You can split audio, adjust the audio volume, and perform audio ducking. The creative creators can also add a voiceover and trim the clips. The original audio of the video can also be replaced technically. Isn’t that the whole dream?

In short, Filmora has everything under one platform. There is no need to download extensive video editors for each functionality.

Moving on to the section, we shall discuss the procedure to detach or remove audio using this exceptional tool. So, let us try this!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Browsing the Video

Download Wondershare Filmora in your system. Launch it as soon as the process is concluded. Import the targeted video files into the program. Drag the video from the library onto the timeline.

Step 2: Removing Audio

To remove the audio, right-click on the video file from the timeline. Click on ‘Detach audio’ from the options that appear. The audio file is separated from the video file. It is displayed in another track below the video track.

Step 3: Final Process

Now, the user is free to make edits to the audio and perform modifications as deemed necessary. Delete the separated audio track if you wish to add a new voiceover or audio in the background. You can do so by clicking on the trash button above the timeline.

Conclusion

The raw videos undergo treatment to look ravishing. Don’t you think? Without the needed editing, these videos wouldn’t stand anywhere. After the original audio is detached, a better message is expressed to replace it with promising content.

The article introduced Premiere Pro. Moreover, how to detach audio from video Premiere Pro was also discussed in detail. If you want to extract audio from video, this write-up will help you. Wondershare Filmora is a video editing software with great tools to get the trick done in seconds.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 Tips to Detach or Remove Audio From Video in Filmora

Part 1: How Can You Extract, Separate, or Detach Audio from Video? [Premiere Pro]

Premiere Pro detaches audio flawlessly. Adobe Premiere Pro is a video editing software. With creative tools, a flexible interface, and powerful capabilities, Premiere Pro turns your raw footage into something extraordinary. It enables you to perform color grading, color correction, and transitions effectively. The largest toolset has made life bearable for creators.

Additionally, Adobe Premiere Pro has an excellent range of collaboration tools. There are learning tools to guide the beginner towards a successful process. These tutorials have assisted the user in performing basic operations productively. The refined video editing tools have created a revolution in the market. The Auto Reframe feature changes the crop selection by keeping the attention where it is due.

Are you invested in detaching the audio process? Worry no more as we have got you. Premiere Pro doesn’t leave its users empty-handed. Audio extraction and separation both would be included in this section.

Audio Extraction Process

The audio extraction procedure is a great way to lubricate the editing process. The audio is extracted to add new audio master clips in this phenomenon. The channel mapping, duration, gain, speed, and footage adjustment are applied to the extracted clips. The original content remains preserved.

Before detaching audio, let us shift our focus to extracting it. So, are you with us? Follow the step-by-step below to extract audio from the video.

Step 1: Launching Premiere Pro

Open Adobe Premiere Pro. Press ‘New Project’ from the interface that appears. The default settings are good to go. However, make sure that the output location is appropriate. Hit ‘OK.’

Step 2: Importing the Clips

Now, click on ‘Media Browser’ from the middle panel. Import the targeted video clips to initiate the process. Select the videos whose audio has to be extracted. Head to the ‘Clip’ section and choose ‘Audio Options.’ Hit ‘Extract Audio’ afterward.

Step 3: File Extraction

In a couple of seconds, Premiere Pro creates duplicate audio files. The original video clips are not affected in any way. Moving on, let us move on to export the extracted audio clips.

Step 4: Exporting Process

Mark in and out points on your sequence for the session you wish to export. Mute the rest of the tracks. Now, navigate to the ‘File,’ press ‘Export,’ and then ‘Media.’ For encoding format, choose between MP3 and WAV form audio based on the original file format. Choose the output location. Hit ‘Export,’ and you are done.

Audio Detaching Process

Similarly, audio separation is another way to access a part of the audio. It permits you to use any audio section and make necessary edits to it. To detach audio in Premiere Pro, kindly follow the guidelines below.

Step 1: Importing the Media Files

Launch Premiere Pro from your computer. The interface opens up in seconds. The user is recommended to browse the targeted video with attached audio. Add it to the timeline of the Premiere Pro.

Step 2: Unlinking Process

After that, right-click on the clip. Choose ‘Unlink’ from the list of options that appear. The user can easily select and edit both the audio and video content. However, you can also separate audio using another faster process.

Step 3: Deleting Process

Hold down the ALT key from your keyboard and click on the audio clip to do this more effectively. Use the ‘Delete’ button and get rid of it once and for all. Now, make necessary edits, and you are done for the day!

Part 2: Tips to Detach or Remove Audio From Video in Filmora

Wondershare Filmora needs no introduction. Filmora has always had something refined to offer in a world full of video editors. Wouldn’t you agree? A content creator needs a video editing tool with an interactive interface with balanced functions.

Filmora knows different tricks to keep creative professionals invested in it. From keyframing to motion tracking and green screen to color matching, Wondershare Filmora wouldn’t disappoint you. The optimized GPU detection brings productivity to work. As far as audio editing is concerned, Filmora has advanced tools on the go.

The audio equalizer and audio mixer fine-tune the music and adjust the audio of separate tracks, respectively. You can split audio, adjust the audio volume, and perform audio ducking. The creative creators can also add a voiceover and trim the clips. The original audio of the video can also be replaced technically. Isn’t that the whole dream?

In short, Filmora has everything under one platform. There is no need to download extensive video editors for each functionality.

Moving on to the section, we shall discuss the procedure to detach or remove audio using this exceptional tool. So, let us try this!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Browsing the Video

Download Wondershare Filmora in your system. Launch it as soon as the process is concluded. Import the targeted video files into the program. Drag the video from the library onto the timeline.

Step 2: Removing Audio

To remove the audio, right-click on the video file from the timeline. Click on ‘Detach audio’ from the options that appear. The audio file is separated from the video file. It is displayed in another track below the video track.

Step 3: Final Process

Now, the user is free to make edits to the audio and perform modifications as deemed necessary. Delete the separated audio track if you wish to add a new voiceover or audio in the background. You can do so by clicking on the trash button above the timeline.

Conclusion

The raw videos undergo treatment to look ravishing. Don’t you think? Without the needed editing, these videos wouldn’t stand anywhere. After the original audio is detached, a better message is expressed to replace it with promising content.

The article introduced Premiere Pro. Moreover, how to detach audio from video Premiere Pro was also discussed in detail. If you want to extract audio from video, this write-up will help you. Wondershare Filmora is a video editing software with great tools to get the trick done in seconds.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Cutting-Edge Mac Sound Slicer: Enhanced & Refined Features

Top Audio Splitter on Mac in 2024

Shanoon Cox

Mar 27, 2024• Proven solutions

There are times when you need to split audio files with the use of your Mac. The fastest and best way to do the task is with the use of an audio splitter for Mac. There are lots of programs made to split audio tracks. If you are looking for the best free apps for the Mac, then you are on the right page. Below are the top audio splitters for Mac users.

Part 1. Recommended Best Audio Splitting Tool: Wondershare Filmora

Although widely known as the best video editing software for beginners, Wondershare Filmora video editor for Mac also serves as a great audio editing tool. It can split, trim, fade-in or out, change the speed of your audio files, etc.

One surprising feature this tool offers is its multi-audio track feature. Sometimes we need to add not just background music, but also additional voiceovers for a home video we create. It is almost impossible to add both two audio tracks to a video at the same time. However, by using Filmora, you will be able to add up to 3 audio tracks at a time. That means your voiceover, background music, even some funny or emotional sound effects can be added to a video clip simultaneously with one click of the button. Download a free trial version to try it right now:

Below is a brief video introduction to this amazing program:

If you are Windows users, check this tutorial instead.

Part 2. Five Best Audio Trimming Tools You Can Choose

Below are the top 5 audio splitters for Mac devices you can choose to use. Read on to take a close look at them.

1. Mp3splt (Mac)

Mp3splt(Mac) is one of the best audio splitter software available. It is open-source software that has the ability to split MP3 and Ogg Vorbis audio files. It is not only useful to split large MP3 files into smaller files or to divide entire albums into individual tracks, but also easy to use. You just need to select a start and end time position.

The best thing about Mp3splt is that it doesn’t decode the file during the splitting process, which avoids loss due to digital degeneration. If you need to split an album, you can manually input the split points and the filenames, or you can get them through CDDB or .CUE files. The audio splitter Mac software also supports automatic silence split that can be utilized to adjust split points as well as supporting ID3v1 and ID3v2 tags. It is also available for Windows and Linux users.

2. Macsome Audio Splitter Freeware

Another free audio splitting software running on Mac computer that you can use is Macsome Audio Splitter Freeware. It can be used to split MP3 files into smaller files in just a couple of seconds. It preserves the tags and the sound quality of the files while splitting them. It also allows batch splitting, which is good if you have several audio files that you need to split. To split audio files, you can select by time or number of pieces. You can also choose the start and end time to split.

Macsome Audio Splitter Freeware has a playback feature that allows you to play the audio file and adjust its volume. The audio splitter Mac software is compatible with Mac OSX 10.4.x or 10.5.x with at least 512 MB of physical RAM. The only downside is that it can only split audio files that are unprotected or DRM-free.

3. MP3TrueEdit for Mac

MP3TrueEdit is a simple audio splitter Mac tool that has been designed to edit MP3 audio files. While it costs $11.99 on the Mac App Store, you can download and try it for free. The developers have made the app to split or edit files without the need to decompress and recompress the audio. It guarantees that there is no loss in the quality. It is also designed to protect the audio file from becoming corrupt or invalid during the splitting process.

MP3TrueEdit is more than just an audio splitter Mac software. It is an audio editing tool that allows you to edit audio files. It can also be used to record meetings, talks or lectures so that you don’t have to miss a word. You can also record band practice sessions or choir rehearsals. Then you can edit the tempo or pitch of the recording to suit your needs.

4. MP3 Trimmer (Mac)

MP3 Trimmer (Mac) is a quite easy to use audio splitter Mac tool. Not only does it allow you to split MP3 files, it can also be used to edit, join, repair, analyze audio files, and a lot more. There’s no need to re-encode and convert file formats with the use of various applications. All you need is the MP3 Trimmer if you want to remove portions of your MP3 files without losing the quality.

With the MP3 Trimmer, you will be able to remove the undesired portion of the audio file, add some fade-in/fade-out effects, change gain and add silence. If you have a couple of large audio files that needs to be split, then you can benefit from the batch-edit feature of the MP3 Trimmer. It also has built-in tools that will help you analyze and repair broken audio files. It is free to use as long as you want.

5. AudioSlicer for Mac

AudioSlicer is a Cocoa GUI app for Mac OS X. It’s designed to find all the silences in an MP3 file. It also allows you to split the audio file and tag them properly. While there are other audio splitter Mac apps that can do the tasks automatically according to specific criteria, AudioSlicer displays the silences within the specified duration. It allows you to listen to the audio before and after the silence. Then you can decide if you want to do the split at that point. Splitting of the file is done without any loss to the quality because there is no decoding or re-encoding of the audio file during the process. It is compatible with Mac OS X 10.3 and above and supports both Intel Macs and PowerPC.

That’s the best audio trimming software for Mac. The most recommended is Wondershare Filmora for Mac. If you have other good choices, welcome to share with us.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

There are times when you need to split audio files with the use of your Mac. The fastest and best way to do the task is with the use of an audio splitter for Mac. There are lots of programs made to split audio tracks. If you are looking for the best free apps for the Mac, then you are on the right page. Below are the top audio splitters for Mac users.

Part 1. Recommended Best Audio Splitting Tool: Wondershare Filmora

Although widely known as the best video editing software for beginners, Wondershare Filmora video editor for Mac also serves as a great audio editing tool. It can split, trim, fade-in or out, change the speed of your audio files, etc.

One surprising feature this tool offers is its multi-audio track feature. Sometimes we need to add not just background music, but also additional voiceovers for a home video we create. It is almost impossible to add both two audio tracks to a video at the same time. However, by using Filmora, you will be able to add up to 3 audio tracks at a time. That means your voiceover, background music, even some funny or emotional sound effects can be added to a video clip simultaneously with one click of the button. Download a free trial version to try it right now:

Below is a brief video introduction to this amazing program:

If you are Windows users, check this tutorial instead.

Part 2. Five Best Audio Trimming Tools You Can Choose

Below are the top 5 audio splitters for Mac devices you can choose to use. Read on to take a close look at them.

1. Mp3splt (Mac)

Mp3splt(Mac) is one of the best audio splitter software available. It is open-source software that has the ability to split MP3 and Ogg Vorbis audio files. It is not only useful to split large MP3 files into smaller files or to divide entire albums into individual tracks, but also easy to use. You just need to select a start and end time position.

The best thing about Mp3splt is that it doesn’t decode the file during the splitting process, which avoids loss due to digital degeneration. If you need to split an album, you can manually input the split points and the filenames, or you can get them through CDDB or .CUE files. The audio splitter Mac software also supports automatic silence split that can be utilized to adjust split points as well as supporting ID3v1 and ID3v2 tags. It is also available for Windows and Linux users.

2. Macsome Audio Splitter Freeware

Another free audio splitting software running on Mac computer that you can use is Macsome Audio Splitter Freeware. It can be used to split MP3 files into smaller files in just a couple of seconds. It preserves the tags and the sound quality of the files while splitting them. It also allows batch splitting, which is good if you have several audio files that you need to split. To split audio files, you can select by time or number of pieces. You can also choose the start and end time to split.

Macsome Audio Splitter Freeware has a playback feature that allows you to play the audio file and adjust its volume. The audio splitter Mac software is compatible with Mac OSX 10.4.x or 10.5.x with at least 512 MB of physical RAM. The only downside is that it can only split audio files that are unprotected or DRM-free.

3. MP3TrueEdit for Mac

MP3TrueEdit is a simple audio splitter Mac tool that has been designed to edit MP3 audio files. While it costs $11.99 on the Mac App Store, you can download and try it for free. The developers have made the app to split or edit files without the need to decompress and recompress the audio. It guarantees that there is no loss in the quality. It is also designed to protect the audio file from becoming corrupt or invalid during the splitting process.

MP3TrueEdit is more than just an audio splitter Mac software. It is an audio editing tool that allows you to edit audio files. It can also be used to record meetings, talks or lectures so that you don’t have to miss a word. You can also record band practice sessions or choir rehearsals. Then you can edit the tempo or pitch of the recording to suit your needs.

4. MP3 Trimmer (Mac)

MP3 Trimmer (Mac) is a quite easy to use audio splitter Mac tool. Not only does it allow you to split MP3 files, it can also be used to edit, join, repair, analyze audio files, and a lot more. There’s no need to re-encode and convert file formats with the use of various applications. All you need is the MP3 Trimmer if you want to remove portions of your MP3 files without losing the quality.

With the MP3 Trimmer, you will be able to remove the undesired portion of the audio file, add some fade-in/fade-out effects, change gain and add silence. If you have a couple of large audio files that needs to be split, then you can benefit from the batch-edit feature of the MP3 Trimmer. It also has built-in tools that will help you analyze and repair broken audio files. It is free to use as long as you want.

5. AudioSlicer for Mac

AudioSlicer is a Cocoa GUI app for Mac OS X. It’s designed to find all the silences in an MP3 file. It also allows you to split the audio file and tag them properly. While there are other audio splitter Mac apps that can do the tasks automatically according to specific criteria, AudioSlicer displays the silences within the specified duration. It allows you to listen to the audio before and after the silence. Then you can decide if you want to do the split at that point. Splitting of the file is done without any loss to the quality because there is no decoding or re-encoding of the audio file during the process. It is compatible with Mac OS X 10.3 and above and supports both Intel Macs and PowerPC.

That’s the best audio trimming software for Mac. The most recommended is Wondershare Filmora for Mac. If you have other good choices, welcome to share with us.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

There are times when you need to split audio files with the use of your Mac. The fastest and best way to do the task is with the use of an audio splitter for Mac. There are lots of programs made to split audio tracks. If you are looking for the best free apps for the Mac, then you are on the right page. Below are the top audio splitters for Mac users.

Part 1. Recommended Best Audio Splitting Tool: Wondershare Filmora

Although widely known as the best video editing software for beginners, Wondershare Filmora video editor for Mac also serves as a great audio editing tool. It can split, trim, fade-in or out, change the speed of your audio files, etc.

One surprising feature this tool offers is its multi-audio track feature. Sometimes we need to add not just background music, but also additional voiceovers for a home video we create. It is almost impossible to add both two audio tracks to a video at the same time. However, by using Filmora, you will be able to add up to 3 audio tracks at a time. That means your voiceover, background music, even some funny or emotional sound effects can be added to a video clip simultaneously with one click of the button. Download a free trial version to try it right now:

Below is a brief video introduction to this amazing program:

If you are Windows users, check this tutorial instead.

Part 2. Five Best Audio Trimming Tools You Can Choose

Below are the top 5 audio splitters for Mac devices you can choose to use. Read on to take a close look at them.

1. Mp3splt (Mac)

Mp3splt(Mac) is one of the best audio splitter software available. It is open-source software that has the ability to split MP3 and Ogg Vorbis audio files. It is not only useful to split large MP3 files into smaller files or to divide entire albums into individual tracks, but also easy to use. You just need to select a start and end time position.

The best thing about Mp3splt is that it doesn’t decode the file during the splitting process, which avoids loss due to digital degeneration. If you need to split an album, you can manually input the split points and the filenames, or you can get them through CDDB or .CUE files. The audio splitter Mac software also supports automatic silence split that can be utilized to adjust split points as well as supporting ID3v1 and ID3v2 tags. It is also available for Windows and Linux users.

2. Macsome Audio Splitter Freeware

Another free audio splitting software running on Mac computer that you can use is Macsome Audio Splitter Freeware. It can be used to split MP3 files into smaller files in just a couple of seconds. It preserves the tags and the sound quality of the files while splitting them. It also allows batch splitting, which is good if you have several audio files that you need to split. To split audio files, you can select by time or number of pieces. You can also choose the start and end time to split.

Macsome Audio Splitter Freeware has a playback feature that allows you to play the audio file and adjust its volume. The audio splitter Mac software is compatible with Mac OSX 10.4.x or 10.5.x with at least 512 MB of physical RAM. The only downside is that it can only split audio files that are unprotected or DRM-free.

3. MP3TrueEdit for Mac

MP3TrueEdit is a simple audio splitter Mac tool that has been designed to edit MP3 audio files. While it costs $11.99 on the Mac App Store, you can download and try it for free. The developers have made the app to split or edit files without the need to decompress and recompress the audio. It guarantees that there is no loss in the quality. It is also designed to protect the audio file from becoming corrupt or invalid during the splitting process.

MP3TrueEdit is more than just an audio splitter Mac software. It is an audio editing tool that allows you to edit audio files. It can also be used to record meetings, talks or lectures so that you don’t have to miss a word. You can also record band practice sessions or choir rehearsals. Then you can edit the tempo or pitch of the recording to suit your needs.

4. MP3 Trimmer (Mac)

MP3 Trimmer (Mac) is a quite easy to use audio splitter Mac tool. Not only does it allow you to split MP3 files, it can also be used to edit, join, repair, analyze audio files, and a lot more. There’s no need to re-encode and convert file formats with the use of various applications. All you need is the MP3 Trimmer if you want to remove portions of your MP3 files without losing the quality.

With the MP3 Trimmer, you will be able to remove the undesired portion of the audio file, add some fade-in/fade-out effects, change gain and add silence. If you have a couple of large audio files that needs to be split, then you can benefit from the batch-edit feature of the MP3 Trimmer. It also has built-in tools that will help you analyze and repair broken audio files. It is free to use as long as you want.

5. AudioSlicer for Mac

AudioSlicer is a Cocoa GUI app for Mac OS X. It’s designed to find all the silences in an MP3 file. It also allows you to split the audio file and tag them properly. While there are other audio splitter Mac apps that can do the tasks automatically according to specific criteria, AudioSlicer displays the silences within the specified duration. It allows you to listen to the audio before and after the silence. Then you can decide if you want to do the split at that point. Splitting of the file is done without any loss to the quality because there is no decoding or re-encoding of the audio file during the process. It is compatible with Mac OS X 10.3 and above and supports both Intel Macs and PowerPC.

That’s the best audio trimming software for Mac. The most recommended is Wondershare Filmora for Mac. If you have other good choices, welcome to share with us.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

There are times when you need to split audio files with the use of your Mac. The fastest and best way to do the task is with the use of an audio splitter for Mac. There are lots of programs made to split audio tracks. If you are looking for the best free apps for the Mac, then you are on the right page. Below are the top audio splitters for Mac users.

Part 1. Recommended Best Audio Splitting Tool: Wondershare Filmora

Although widely known as the best video editing software for beginners, Wondershare Filmora video editor for Mac also serves as a great audio editing tool. It can split, trim, fade-in or out, change the speed of your audio files, etc.

One surprising feature this tool offers is its multi-audio track feature. Sometimes we need to add not just background music, but also additional voiceovers for a home video we create. It is almost impossible to add both two audio tracks to a video at the same time. However, by using Filmora, you will be able to add up to 3 audio tracks at a time. That means your voiceover, background music, even some funny or emotional sound effects can be added to a video clip simultaneously with one click of the button. Download a free trial version to try it right now:

Below is a brief video introduction to this amazing program:

If you are Windows users, check this tutorial instead.

Part 2. Five Best Audio Trimming Tools You Can Choose

Below are the top 5 audio splitters for Mac devices you can choose to use. Read on to take a close look at them.

1. Mp3splt (Mac)

Mp3splt(Mac) is one of the best audio splitter software available. It is open-source software that has the ability to split MP3 and Ogg Vorbis audio files. It is not only useful to split large MP3 files into smaller files or to divide entire albums into individual tracks, but also easy to use. You just need to select a start and end time position.

The best thing about Mp3splt is that it doesn’t decode the file during the splitting process, which avoids loss due to digital degeneration. If you need to split an album, you can manually input the split points and the filenames, or you can get them through CDDB or .CUE files. The audio splitter Mac software also supports automatic silence split that can be utilized to adjust split points as well as supporting ID3v1 and ID3v2 tags. It is also available for Windows and Linux users.

2. Macsome Audio Splitter Freeware

Another free audio splitting software running on Mac computer that you can use is Macsome Audio Splitter Freeware. It can be used to split MP3 files into smaller files in just a couple of seconds. It preserves the tags and the sound quality of the files while splitting them. It also allows batch splitting, which is good if you have several audio files that you need to split. To split audio files, you can select by time or number of pieces. You can also choose the start and end time to split.

Macsome Audio Splitter Freeware has a playback feature that allows you to play the audio file and adjust its volume. The audio splitter Mac software is compatible with Mac OSX 10.4.x or 10.5.x with at least 512 MB of physical RAM. The only downside is that it can only split audio files that are unprotected or DRM-free.

3. MP3TrueEdit for Mac

MP3TrueEdit is a simple audio splitter Mac tool that has been designed to edit MP3 audio files. While it costs $11.99 on the Mac App Store, you can download and try it for free. The developers have made the app to split or edit files without the need to decompress and recompress the audio. It guarantees that there is no loss in the quality. It is also designed to protect the audio file from becoming corrupt or invalid during the splitting process.

MP3TrueEdit is more than just an audio splitter Mac software. It is an audio editing tool that allows you to edit audio files. It can also be used to record meetings, talks or lectures so that you don’t have to miss a word. You can also record band practice sessions or choir rehearsals. Then you can edit the tempo or pitch of the recording to suit your needs.

4. MP3 Trimmer (Mac)

MP3 Trimmer (Mac) is a quite easy to use audio splitter Mac tool. Not only does it allow you to split MP3 files, it can also be used to edit, join, repair, analyze audio files, and a lot more. There’s no need to re-encode and convert file formats with the use of various applications. All you need is the MP3 Trimmer if you want to remove portions of your MP3 files without losing the quality.

With the MP3 Trimmer, you will be able to remove the undesired portion of the audio file, add some fade-in/fade-out effects, change gain and add silence. If you have a couple of large audio files that needs to be split, then you can benefit from the batch-edit feature of the MP3 Trimmer. It also has built-in tools that will help you analyze and repair broken audio files. It is free to use as long as you want.

5. AudioSlicer for Mac

AudioSlicer is a Cocoa GUI app for Mac OS X. It’s designed to find all the silences in an MP3 file. It also allows you to split the audio file and tag them properly. While there are other audio splitter Mac apps that can do the tasks automatically according to specific criteria, AudioSlicer displays the silences within the specified duration. It allows you to listen to the audio before and after the silence. Then you can decide if you want to do the split at that point. Splitting of the file is done without any loss to the quality because there is no decoding or re-encoding of the audio file during the process. It is compatible with Mac OS X 10.3 and above and supports both Intel Macs and PowerPC.

That’s the best audio trimming software for Mac. The most recommended is Wondershare Filmora for Mac. If you have other good choices, welcome to share with us.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: