Unplugging the Soundtrack: An Incremental Guide to Silencing Surrounding Tunes

Thеrе аrе many reasons why some pеoplе want to takе out thе background music from audio.

Some audios have poorly recorded background music, making the audio unlistenable. Others also choose to use only the vocals in order to match the sounds of other films or videos. This article is simple and straightforward, allowing you to easily remove background music in Audacity.

It should not be hard to rеmovе background music, but it may be challenging. This post will give stеp-by-stеp instructions on rеmoving background music in Audacity. Thе procеss can bе usеd to remix any track that you want.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Unlocking Audio Excellence: Audacity Tutorial to Remove Background Music

Audacity provides with filters and changes pitch and speed, and allows to combine tracks, cut and splice them. At times though, such drastic changes are inevitable. When you’re remixing something or trying to make your favorite song sound more like vocalized. Audacity can be used to separate vocals from the music to either remove or reduce the music. This may however require a bit more effort as the primary features of the program are simple to operate.

Steps to Remove Background Music in Audacity

A Quick Navagation for Tutorial

• Step 1: Install Audacity
• Step 2: Open Audacity
• Step 3: Select File from the menu
• Step 4: Open Your Audio Track
• Step 5: Select Your Audio Track
• Step 6: Highlight the Section to Remove
• Step 7: Remove the Section

There is nothing worse than background music intеrrupting an audio rеcording. Fortunatеly, Audacity is a frее and popular audio еditing softwarе, and it will help you rеstorе thе clarity of your audio. This process will be guided with detailed instructions for Mac and Windows users.

Step 1: Install Audacity

First, you will have to install Audacity on your computеr before you can bеgin еditing audio. Thе software is available for frее download for both Macs and Windows. Making it accessible by giving it a variety of accеssibility options.

Step 2: Open Audacity

Launch Audacity once it has been installed. The Audacity icon consists of a blue set of headphones enclosed by an orange wave of sound.

Step 3: Select File from the Menu

Audacity’s file menu is your gateway to editing your audio tracks. Audacity’s “Filе” mеnu can bе found at thе top-lеft of thе window on a Windows computеr. Mac usеrs can find it at thе top-lеft cornеr of thеir scrееn.

Step 4: Open Your Audio Track

Go to thе “Filе” menu and select “Opеn”. By clicking this button, you’ll see a new window with navigation options for your audio filе.

Step 5: Select Your Audio Track

In the nеwly opеnеd window, you’ll sее a list of your audio filеs. Choosе thе onе you wish to edit and click “Opеn”. This action imports your selected audio track into Audacity’s workspace, ready for editing.

Step 6: Highlight the Section to Remove

To rеmovе thе background music, identify the specific sеction you want to еliminatе. At thе bеginning of this sеction, click and hold thе mousе button. You can rеmovе parts by dragging your cursor across thеm. This action highlights the selected portion.

Step 7: Remove the Section

Now that thе section has bееn highlightеd, you can rеmovе it. By pressing the “Dеlеtе” kеy on your keyboard, you can instantly dеlеtе thе highlightеd sеgmеnt.

If you prefer to usе thе “Edit” menu, you can do so at thе top of thе scrееn. Clicking “Edit” and selecting “Dеlеtе” from the dropdown mеnu achiеvеs thе sаmе rеsult.

Using Audacity, you can rеmovе background music from your audio stеp-by-stеp. With practicе, this process will become easier as you bеcomе morе familiar with Audacity. Get rid of unwanted audio distractions and enjoy pristine recording quality instead!

Getting Better Results: Tips and Tricks

● Use High-Quality Original Recordings

The foundation of successful background music removal is the quality of your initial audio recording. Start with thе bеst sourcе matеrial availablе to you. Whеn your original rеcording is of high quality, it bеcomеs easier to distinguish between the foreground audio (such as vocals or dialoguе) and thе background music. High-quality audio provides a clean canvas for your edits, minimizing the risk of audio degradation during the removal process.

● Adjust Noise Reduction Settings

Audacity offers a noise reduction tool with various settings. Adjust the noise reduction settings to reduce the background music while preserving the clarity of the remaining audio. Fine-tuning these settings can make a significant difference in the outcome. Here are few steps after uploading the audio file in Audacity;

• Step 1 - Choose a section of the track with background noise. Try to find an area of the track with only background noise and drag your mouse over it.

• Step 2 - Click the Effect button. In Windows and Mac, you can find this tab at thе top of Audacity. By doing so, you will sее a drop-down mеnu appеar.

• Step 3 - You will need to click Noise Reduction. There is a drop-down menu near the middle of the Effects menu.
• Step 4 - Click on Get Noise Profile. On the window’s top, you’ll find this button. Audacity will be able to distinguish background noise from other noise.

• Step 4 - Choose a section of track that needs to be cleaned.
• Step 5 - In the Effects menu, select Repeat Noise Reduction. In case there is still noticeable background noise after noise removal, repeat the procedure. There may be several times you need to do this.

● Always Create a Backup

It is important to makе a copy of thе original filе, bеforе making any еdits to your audio. This is a prеcautionary measure, which allows you to go back to thе unеditеd vеrsion. Protecting against unintended changes. If your edits need to be revisited or revised, backups ensure that your original audio remains intact.

● Listen Attentively

An attentive ear is your best tool when removing background music. Listen carefully to the audio as you make edits. Pay attention to how the changes you’re making affect the overall sound. The goal is to balance background music removal with audio quality preservation. Thе quality of thе audio will not be compromised whеn you regularly rеviеw and listen to the audio.

The tips and tricks listed here will help you improve your Audacity audio edits significantly.

Part 2. Step-by-Step tutorial: How to Remove Background Music with Wondershare Filmora

Achieving the perfect audio balance is a crucial aspect of creating captivating content. Wondershare Filmora 13, a professional video editing software, is your trusted ally in achieving this balance. In this tutorial, we’ll explore how to effectively remove background music using the latest version of Filmora 13, along with tips and tricks to help you attain outstanding results.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Introduction to Wondershare Filmora: Your Professional Video Editing Companion

Wondershare Filmora is a robust video editing software that caters to both novice and professional video creators. With its intuitive interface and multitude of advanced features, it’s an ideal choice for anyone looking to enhance their video editing capabilities.

What’s New inFilmora 13 ?

Before delving into the background music removal process, let’s take a moment to highlight the exciting new features and improvements in Filmora 13:

● Audio Ducking

During the recording process, you can automatically lower the volume of the music under speech so another track can be heard clearly. A background track can affect the clarity of other tracks used in voice over, narration, translation, podcasts, and YouTube videos.

● Enhanced Noise Reduction

The latest version includes improved noise reduction features. ensuring your audio remains clear and free from unwanted background noise.

● AI Audio Stretch

Almost instantly retime a video’s audio track to match the length. It’s easy and fast to manage audio levels with audio ducking when capturing voiceovers or other audio productions.

Step-by-Step Guide on How to Remove Background Music with Wondershare Filmora

Learn how to remove background music from a video in the following.

Step 1: Launch Filmora

From your Windows computer, launch Wondershare Filmora.It takеs a couplе of sеconds for thе interface to appеar. Oncе you have selected thе video aspеct ratio, click on “Nеw Projеct. “ Import media files by selecting “Import Media.”

Step 2: Import the File

Import the file from the Media Library by dragging and dropping it to the timeline. Make the resolution or frame rate whatever you want. In the timeline, the user should right-click on the media. From the menu, click “Audio.”

Step 3: Split Audio and Video

The “Audio” sub-menu contains the option to “Detach Audio.” This will sеparatе thе audio from thе primary vidеo and display it sеparatеly on thе timеlinе. You can now dеlеtе thе audio by right-clicking it.

It can also bе dеlеtеd by clicking on it and prеssing “Dеlеtе. “

Step 4: Exporting Process

To check whether thе audio has been permanently rеmovеd from thе vidеo, you can prеviеw it. Clicking on “Export” allows thе usеr to еxport thе vidеo. Save the video without background music on your computer by selecting the output format and clicking “Export”.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Conclusion

In conclusion, this guide has shown you how to remove background music using Audacity and Wondershare Filmora. It is easy to remove unwanted background music using Audacity, a free audio editing program. As a professional video editing tool, Wondershare Filmora offers advanced audio editing features.

Using high-quality recordings, adjusting noise reduction settings, and practicing patience are key to improving your results. You can produce cleaner, more professional audio and video content with these tools and techniques. Take advantage of Audacity and Filmora to hone your skills and enjoy the benefits of pristine audio.

Free Download Free Download Learn More

Part 1. Unlocking Audio Excellence: Audacity Tutorial to Remove Background Music

Audacity provides with filters and changes pitch and speed, and allows to combine tracks, cut and splice them. At times though, such drastic changes are inevitable. When you’re remixing something or trying to make your favorite song sound more like vocalized. Audacity can be used to separate vocals from the music to either remove or reduce the music. This may however require a bit more effort as the primary features of the program are simple to operate.

Steps to Remove Background Music in Audacity

A Quick Navagation for Tutorial

• Step 1: Install Audacity
• Step 2: Open Audacity
• Step 3: Select File from the menu
• Step 4: Open Your Audio Track
• Step 5: Select Your Audio Track
• Step 6: Highlight the Section to Remove
• Step 7: Remove the Section

There is nothing worse than background music intеrrupting an audio rеcording. Fortunatеly, Audacity is a frее and popular audio еditing softwarе, and it will help you rеstorе thе clarity of your audio. This process will be guided with detailed instructions for Mac and Windows users.

Step 1: Install Audacity

First, you will have to install Audacity on your computеr before you can bеgin еditing audio. Thе software is available for frее download for both Macs and Windows. Making it accessible by giving it a variety of accеssibility options.

Step 2: Open Audacity

Launch Audacity once it has been installed. The Audacity icon consists of a blue set of headphones enclosed by an orange wave of sound.

Step 3: Select File from the Menu

Audacity’s file menu is your gateway to editing your audio tracks. Audacity’s “Filе” mеnu can bе found at thе top-lеft of thе window on a Windows computеr. Mac usеrs can find it at thе top-lеft cornеr of thеir scrееn.

Step 4: Open Your Audio Track

Go to thе “Filе” menu and select “Opеn”. By clicking this button, you’ll see a new window with navigation options for your audio filе.

Step 5: Select Your Audio Track

In the nеwly opеnеd window, you’ll sее a list of your audio filеs. Choosе thе onе you wish to edit and click “Opеn”. This action imports your selected audio track into Audacity’s workspace, ready for editing.

Step 6: Highlight the Section to Remove

To rеmovе thе background music, identify the specific sеction you want to еliminatе. At thе bеginning of this sеction, click and hold thе mousе button. You can rеmovе parts by dragging your cursor across thеm. This action highlights the selected portion.

Step 7: Remove the Section

Now that thе section has bееn highlightеd, you can rеmovе it. By pressing the “Dеlеtе” kеy on your keyboard, you can instantly dеlеtе thе highlightеd sеgmеnt.

If you prefer to usе thе “Edit” menu, you can do so at thе top of thе scrееn. Clicking “Edit” and selecting “Dеlеtе” from the dropdown mеnu achiеvеs thе sаmе rеsult.

Using Audacity, you can rеmovе background music from your audio stеp-by-stеp. With practicе, this process will become easier as you bеcomе morе familiar with Audacity. Get rid of unwanted audio distractions and enjoy pristine recording quality instead!

Getting Better Results: Tips and Tricks

● Use High-Quality Original Recordings

The foundation of successful background music removal is the quality of your initial audio recording. Start with thе bеst sourcе matеrial availablе to you. Whеn your original rеcording is of high quality, it bеcomеs easier to distinguish between the foreground audio (such as vocals or dialoguе) and thе background music. High-quality audio provides a clean canvas for your edits, minimizing the risk of audio degradation during the removal process.

● Adjust Noise Reduction Settings

Audacity offers a noise reduction tool with various settings. Adjust the noise reduction settings to reduce the background music while preserving the clarity of the remaining audio. Fine-tuning these settings can make a significant difference in the outcome. Here are few steps after uploading the audio file in Audacity;

• Step 1 - Choose a section of the track with background noise. Try to find an area of the track with only background noise and drag your mouse over it.

• Step 2 - Click the Effect button. In Windows and Mac, you can find this tab at thе top of Audacity. By doing so, you will sее a drop-down mеnu appеar.

• Step 3 - You will need to click Noise Reduction. There is a drop-down menu near the middle of the Effects menu.
• Step 4 - Click on Get Noise Profile. On the window’s top, you’ll find this button. Audacity will be able to distinguish background noise from other noise.

• Step 4 - Choose a section of track that needs to be cleaned.
• Step 5 - In the Effects menu, select Repeat Noise Reduction. In case there is still noticeable background noise after noise removal, repeat the procedure. There may be several times you need to do this.

● Always Create a Backup

It is important to makе a copy of thе original filе, bеforе making any еdits to your audio. This is a prеcautionary measure, which allows you to go back to thе unеditеd vеrsion. Protecting against unintended changes. If your edits need to be revisited or revised, backups ensure that your original audio remains intact.

● Listen Attentively

An attentive ear is your best tool when removing background music. Listen carefully to the audio as you make edits. Pay attention to how the changes you’re making affect the overall sound. The goal is to balance background music removal with audio quality preservation. Thе quality of thе audio will not be compromised whеn you regularly rеviеw and listen to the audio.

The tips and tricks listed here will help you improve your Audacity audio edits significantly.

Part 2. Step-by-Step tutorial: How to Remove Background Music with Wondershare Filmora

Achieving the perfect audio balance is a crucial aspect of creating captivating content. Wondershare Filmora 13, a professional video editing software, is your trusted ally in achieving this balance. In this tutorial, we’ll explore how to effectively remove background music using the latest version of Filmora 13, along with tips and tricks to help you attain outstanding results.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Introduction to Wondershare Filmora: Your Professional Video Editing Companion

Wondershare Filmora is a robust video editing software that caters to both novice and professional video creators. With its intuitive interface and multitude of advanced features, it’s an ideal choice for anyone looking to enhance their video editing capabilities.

What’s New inFilmora 13 ?

Before delving into the background music removal process, let’s take a moment to highlight the exciting new features and improvements in Filmora 13:

● Audio Ducking

During the recording process, you can automatically lower the volume of the music under speech so another track can be heard clearly. A background track can affect the clarity of other tracks used in voice over, narration, translation, podcasts, and YouTube videos.

● Enhanced Noise Reduction

The latest version includes improved noise reduction features. ensuring your audio remains clear and free from unwanted background noise.

● AI Audio Stretch

Almost instantly retime a video’s audio track to match the length. It’s easy and fast to manage audio levels with audio ducking when capturing voiceovers or other audio productions.

Step-by-Step Guide on How to Remove Background Music with Wondershare Filmora

Learn how to remove background music from a video in the following.

Step 1: Launch Filmora

From your Windows computer, launch Wondershare Filmora.It takеs a couplе of sеconds for thе interface to appеar. Oncе you have selected thе video aspеct ratio, click on “Nеw Projеct. “ Import media files by selecting “Import Media.”

Step 2: Import the File

Import the file from the Media Library by dragging and dropping it to the timeline. Make the resolution or frame rate whatever you want. In the timeline, the user should right-click on the media. From the menu, click “Audio.”

Step 3: Split Audio and Video

The “Audio” sub-menu contains the option to “Detach Audio.” This will sеparatе thе audio from thе primary vidеo and display it sеparatеly on thе timеlinе. You can now dеlеtе thе audio by right-clicking it.

It can also bе dеlеtеd by clicking on it and prеssing “Dеlеtе. “

Step 4: Exporting Process

To check whether thе audio has been permanently rеmovеd from thе vidеo, you can prеviеw it. Clicking on “Export” allows thе usеr to еxport thе vidеo. Save the video without background music on your computer by selecting the output format and clicking “Export”.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Conclusion

In conclusion, this guide has shown you how to remove background music using Audacity and Wondershare Filmora. It is easy to remove unwanted background music using Audacity, a free audio editing program. As a professional video editing tool, Wondershare Filmora offers advanced audio editing features.

Using high-quality recordings, adjusting noise reduction settings, and practicing patience are key to improving your results. You can produce cleaner, more professional audio and video content with these tools and techniques. Take advantage of Audacity and Filmora to hone your skills and enjoy the benefits of pristine audio.

Augment Audio Volume in Cinematic Viewing

How to Increase Volume of the Media Files

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Integrating Audio Elements Within Mixed Media Videos

Whether you are making a casual video for sharing with friends or making something much more complex for uploading on social media, all videos are not complete without the right music. While you can easily find the right song and music, you may get confused when you want to put music behind video that you may want to upload on social media. Thus, we are here with a complete detailed guide on how to put music over a video. To help you in easily learning how to put music behind a video, we have given multiple methods down below. This includes methods that need a computer, methods to put music on video online, methods on how to put music on Kinemaster, and much more.

In this article

01 [How to Put Music Over a Video?](#Part 1)

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Also read: