Best Value Volume Scaling Software: 5 Top Gratis Options

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Plugging Into Precision: The Guide to Free Plugins for AutoTuning Audio with Audacity

Audacity is one of the well-known multi-track audio recorders with in-built audio editing tools. It allows adding effects to tweak audio recordings and songs. In short, it incorporates vocal effects to produce better quality audios. You might not find an autotune feature when correcting the pitch of the song in Audacity software. Moreover, there are no inbuilt tools for tuning recordings.

However, GSnap is one of the free plugins that enable you to autotune in Audacity. GSnap plugin is compatible with Windows, Mac, and Linux operating systems. So, you can download it on any one of them to adjust the pitch of audio recordings. The following article will give you in-depth information about Audacity autotune. Let’s begin.

In this article

01 What is Auto Tune and How Does It Work?

02 Top 3 Best Free Autotune Plugins for Audacity

03 How to AutoTune Your Voice for Free with GSnap on Audacity?

Part 1: What is Auto Tune and How Does It Work?

Autotune is a tool that enables you to adjust the pitch of the audio song or recording. It was launched in 1997. The plugin enjoys a trademark from Antares Audio Technologies. It automatically corrects the out-of-tune vocals in your recording.So, if you are struggling with tuning issues after recording a song in software like Audacity, this Audacity autotune tool can help.

Using autotune plugins is one of the best options to autotune songs in Audacity. They are becoming increasingly popular among singers, music producers, and others. Do you want to know why audio recordings need to be tuned and how they are adjusted using autotune? Here’s the answer.

There are high chances of multiple frequencies becoming intertwined when recording audio. Autotune detects the frequencies that are intertwined and splits them into single frequencies. So, the over-tuned vocals are isolated. In brief, autotune is the process of correcting vocal pitch. There are several plugins that can help you deal with tuning issues on piano, guitar, and other musical instruments.

Part 2: Top 3 Best Free Autotune Plugins for Audacity

Audacity comes with built-in audio recording and editing tools. It also allows you to mix different audios. Plus, you can also cut, split, and splice audio files in this amazing software. However, if you are recording a song in Audacity, it won’t be autotuned. Moreover, you cannot auto-correct the song’s pitch by default. So, you need to install autotune plugins for Audacity recording to enhance your vocal performance.

There are a number of plugins that enable you to fine-tune audios in Audacity. If you are interested in mastering the art of autotune using plugins, we have handpicked the following three best free autotune plugins for Audacity. Let’s get into them one by one.

1. GSnap

GSnap is a free audacity autotune plugin offered by GVST. It enables users to fine-tune the vocalist’s pitch, which is also a very easy and quick process. So, you can refine out-of-tune audio using GSnap. The correction mechanism is simple. First, it identifies over-tuned frequencies and then corrects them. Do you want to know more about GSnap and its advantages? If yes, we have summarized all its features in the list below.

Advantages

• GSnap enables you to configure both high and low frequency to offer the best pitch-correction mechanism.
• Background noise can be filtered out by configuring decibel settings.
• Allows controlling the parameters of a vocal performance through Musical Instrument Digital Interface (MIDI).
• GSnap lets you control the pace.
• Enables calibrating tune
• Free and easily accessible
• Available for Windows operating systems
• Maximum pitch bend can be set
• Customizable speed parameters
• Tune calibration

2. MAutoPitch

MAutoPitch provides automatic tuning for audio recording. This plugin comes with a simple yet intuitive interface to facilitate users. It supports pitch correction for all mainstream musical instruments and vocals. In addition to autotuning, MAuto Pitch is also known for offering creativity in your audio recordings. Stereo expansion is one of the creative features provided in this plugin. Furthermore, it also incorporates formant shift.

It applies the channel separation technique to tune the vocals. Moreover, it incorporates a MIDI controller that enables you to control parameters in real-time audio recording. MAutoPitch offers the following benefits to the users.

Advantages

• Offers safety brick wall limiters to limit audio output to a standardized threshold.
• Utilizes efficient and robust algorithms to cope up with fast computers.
• Advanced GUI to maximize flexibility.
• It includes automatic gain compensation to align input loudness with output loudness.
• Compatible with both Windows and Mac
• Easily accessible without internet
• Free updates
• Unique visualization engine

3. Graillon

Graillon is an auto-tuner with the capacity to take your vocal performance to the next level. It comes with unique features, such as pitch-tracking modulation. This can help you change the input voice. Moreover, it also enables users to create choruses. In short, it makes the voice recording pure. In addition to pitch correction, Graillon also performs the pitch-shifting function. So, it’s an ideal solution for people looking for autotuning tools. Here is a brief overview of the pros of Graillon.

Advantages

• Incorporates 23ms of latency
• Maximizes the sound quality of output
• Optimized pitch shifter
• Ability to produce robotic sounds
• Free access to the tool
• Allows altering the vocal pitch
• Compatibility with all mainstream operating systems including Windows, Mac, Linux, and others
• Simple interface
• Equipped with bit crusher
• A full edition version is also available, which provides state-of-the-art features

Part 3: How to AutoTune Your Voice for Free with GSnap on Audacity?

GSnap is a famous plugin for autotuning audio recordings in Audacity. This plugin is free and can be easily installed on Windows, Mac, and Linux operating systems. If you are wondering how to install and use this plugin to autotune your voice in Audacity, the step-by-step guide highlights the process below.

Step 1: Install GSnap

Access the web link https://www.gvst.co.uk/gsnap.htm and click on download GSnap. Choose the GSnap version that matches your operating system.

Note: Audacity must be installed on your computer before the GSnap plugin is downloaded. Plus, the plugin will be downloaded in a zipped file. So, make sure you have an application installed on your device to unzip the downloaded file.

Step 2: Copy GSnap

Navigate to the download folder and right-click on the zipped GSnap option. Select extract here from the menu and copy the file named GSnap.dll.

Step 3: Paste the copied file

Navigate the plugins folder of Audacity and paste the copied file into the folder.

Step 3: Add plugin

Open Audacity and locate the Effects tab on a recording window. Select add/remove plug-ins, click on the GSnap option, and press enable button.

Note: The GSnap plugin will appear in the list under the effects tab and let you autotune your voice recording. You need to configure settings in a GSnap to get the fine-tuned voice.

For the detailed information, you can check the tutorial about how to add and set up GSnap plugin in Audacity.

Conclusion

Human voices and inputs from musical instruments are not perfect by default. Voice recordings in Audacity are no exception. They also need to be processed to enhance the vocal presentation. So, you need to tune the vocals in one way or another. This article mentions free Audacity autotune tools like GSnap to produce better sounds.

02 Top 3 Best Free Autotune Plugins for Audacity

03 How to AutoTune Your Voice for Free with GSnap on Audacity?

Part 1: What is Auto Tune and How Does It Work?

Autotune is a tool that enables you to adjust the pitch of the audio song or recording. It was launched in 1997. The plugin enjoys a trademark from Antares Audio Technologies. It automatically corrects the out-of-tune vocals in your recording.So, if you are struggling with tuning issues after recording a song in software like Audacity, this Audacity autotune tool can help.

Using autotune plugins is one of the best options to autotune songs in Audacity. They are becoming increasingly popular among singers, music producers, and others. Do you want to know why audio recordings need to be tuned and how they are adjusted using autotune? Here’s the answer.

There are high chances of multiple frequencies becoming intertwined when recording audio. Autotune detects the frequencies that are intertwined and splits them into single frequencies. So, the over-tuned vocals are isolated. In brief, autotune is the process of correcting vocal pitch. There are several plugins that can help you deal with tuning issues on piano, guitar, and other musical instruments.

Part 2: Top 3 Best Free Autotune Plugins for Audacity

Audacity comes with built-in audio recording and editing tools. It also allows you to mix different audios. Plus, you can also cut, split, and splice audio files in this amazing software. However, if you are recording a song in Audacity, it won’t be autotuned. Moreover, you cannot auto-correct the song’s pitch by default. So, you need to install autotune plugins for Audacity recording to enhance your vocal performance.

There are a number of plugins that enable you to fine-tune audios in Audacity. If you are interested in mastering the art of autotune using plugins, we have handpicked the following three best free autotune plugins for Audacity. Let’s get into them one by one.

1. GSnap

GSnap is a free audacity autotune plugin offered by GVST. It enables users to fine-tune the vocalist’s pitch, which is also a very easy and quick process. So, you can refine out-of-tune audio using GSnap. The correction mechanism is simple. First, it identifies over-tuned frequencies and then corrects them. Do you want to know more about GSnap and its advantages? If yes, we have summarized all its features in the list below.

Advantages

• GSnap enables you to configure both high and low frequency to offer the best pitch-correction mechanism.
• Background noise can be filtered out by configuring decibel settings.
• Allows controlling the parameters of a vocal performance through Musical Instrument Digital Interface (MIDI).
• GSnap lets you control the pace.
• Enables calibrating tune
• Free and easily accessible
• Available for Windows operating systems
• Maximum pitch bend can be set
• Customizable speed parameters
• Tune calibration

2. MAutoPitch

MAutoPitch provides automatic tuning for audio recording. This plugin comes with a simple yet intuitive interface to facilitate users. It supports pitch correction for all mainstream musical instruments and vocals. In addition to autotuning, MAuto Pitch is also known for offering creativity in your audio recordings. Stereo expansion is one of the creative features provided in this plugin. Furthermore, it also incorporates formant shift.

It applies the channel separation technique to tune the vocals. Moreover, it incorporates a MIDI controller that enables you to control parameters in real-time audio recording. MAutoPitch offers the following benefits to the users.

Advantages

• Offers safety brick wall limiters to limit audio output to a standardized threshold.
• Utilizes efficient and robust algorithms to cope up with fast computers.
• Advanced GUI to maximize flexibility.
• It includes automatic gain compensation to align input loudness with output loudness.
• Compatible with both Windows and Mac
• Easily accessible without internet
• Free updates
• Unique visualization engine

3. Graillon

Graillon is an auto-tuner with the capacity to take your vocal performance to the next level. It comes with unique features, such as pitch-tracking modulation. This can help you change the input voice. Moreover, it also enables users to create choruses. In short, it makes the voice recording pure. In addition to pitch correction, Graillon also performs the pitch-shifting function. So, it’s an ideal solution for people looking for autotuning tools. Here is a brief overview of the pros of Graillon.

Advantages

• Incorporates 23ms of latency
• Maximizes the sound quality of output
• Optimized pitch shifter
• Ability to produce robotic sounds
• Free access to the tool
• Allows altering the vocal pitch
• Compatibility with all mainstream operating systems including Windows, Mac, Linux, and others
• Simple interface
• Equipped with bit crusher
• A full edition version is also available, which provides state-of-the-art features

Part 3: How to AutoTune Your Voice for Free with GSnap on Audacity?

GSnap is a famous plugin for autotuning audio recordings in Audacity. This plugin is free and can be easily installed on Windows, Mac, and Linux operating systems. If you are wondering how to install and use this plugin to autotune your voice in Audacity, the step-by-step guide highlights the process below.

Step 1: Install GSnap

Access the web link https://www.gvst.co.uk/gsnap.htm and click on download GSnap. Choose the GSnap version that matches your operating system.

Note: Audacity must be installed on your computer before the GSnap plugin is downloaded. Plus, the plugin will be downloaded in a zipped file. So, make sure you have an application installed on your device to unzip the downloaded file.

Step 2: Copy GSnap

Navigate to the download folder and right-click on the zipped GSnap option. Select extract here from the menu and copy the file named GSnap.dll.

Step 3: Paste the copied file

Navigate the plugins folder of Audacity and paste the copied file into the folder.

Step 3: Add plugin

Open Audacity and locate the Effects tab on a recording window. Select add/remove plug-ins, click on the GSnap option, and press enable button.

Note: The GSnap plugin will appear in the list under the effects tab and let you autotune your voice recording. You need to configure settings in a GSnap to get the fine-tuned voice.

For the detailed information, you can check the tutorial about how to add and set up GSnap plugin in Audacity.

Conclusion

Human voices and inputs from musical instruments are not perfect by default. Voice recordings in Audacity are no exception. They also need to be processed to enhance the vocal presentation. So, you need to tune the vocals in one way or another. This article mentions free Audacity autotune tools like GSnap to produce better sounds.

02 Top 3 Best Free Autotune Plugins for Audacity

03 How to AutoTune Your Voice for Free with GSnap on Audacity?

Part 1: What is Auto Tune and How Does It Work?

Autotune is a tool that enables you to adjust the pitch of the audio song or recording. It was launched in 1997. The plugin enjoys a trademark from Antares Audio Technologies. It automatically corrects the out-of-tune vocals in your recording.So, if you are struggling with tuning issues after recording a song in software like Audacity, this Audacity autotune tool can help.

Using autotune plugins is one of the best options to autotune songs in Audacity. They are becoming increasingly popular among singers, music producers, and others. Do you want to know why audio recordings need to be tuned and how they are adjusted using autotune? Here’s the answer.

There are high chances of multiple frequencies becoming intertwined when recording audio. Autotune detects the frequencies that are intertwined and splits them into single frequencies. So, the over-tuned vocals are isolated. In brief, autotune is the process of correcting vocal pitch. There are several plugins that can help you deal with tuning issues on piano, guitar, and other musical instruments.

Part 2: Top 3 Best Free Autotune Plugins for Audacity

Audacity comes with built-in audio recording and editing tools. It also allows you to mix different audios. Plus, you can also cut, split, and splice audio files in this amazing software. However, if you are recording a song in Audacity, it won’t be autotuned. Moreover, you cannot auto-correct the song’s pitch by default. So, you need to install autotune plugins for Audacity recording to enhance your vocal performance.

There are a number of plugins that enable you to fine-tune audios in Audacity. If you are interested in mastering the art of autotune using plugins, we have handpicked the following three best free autotune plugins for Audacity. Let’s get into them one by one.

1. GSnap

GSnap is a free audacity autotune plugin offered by GVST. It enables users to fine-tune the vocalist’s pitch, which is also a very easy and quick process. So, you can refine out-of-tune audio using GSnap. The correction mechanism is simple. First, it identifies over-tuned frequencies and then corrects them. Do you want to know more about GSnap and its advantages? If yes, we have summarized all its features in the list below.

Advantages

• GSnap enables you to configure both high and low frequency to offer the best pitch-correction mechanism.
• Background noise can be filtered out by configuring decibel settings.
• Allows controlling the parameters of a vocal performance through Musical Instrument Digital Interface (MIDI).
• GSnap lets you control the pace.
• Enables calibrating tune
• Free and easily accessible
• Available for Windows operating systems
• Maximum pitch bend can be set
• Customizable speed parameters
• Tune calibration

2. MAutoPitch

MAutoPitch provides automatic tuning for audio recording. This plugin comes with a simple yet intuitive interface to facilitate users. It supports pitch correction for all mainstream musical instruments and vocals. In addition to autotuning, MAuto Pitch is also known for offering creativity in your audio recordings. Stereo expansion is one of the creative features provided in this plugin. Furthermore, it also incorporates formant shift.

It applies the channel separation technique to tune the vocals. Moreover, it incorporates a MIDI controller that enables you to control parameters in real-time audio recording. MAutoPitch offers the following benefits to the users.

Advantages

• Offers safety brick wall limiters to limit audio output to a standardized threshold.
• Utilizes efficient and robust algorithms to cope up with fast computers.
• Advanced GUI to maximize flexibility.
• It includes automatic gain compensation to align input loudness with output loudness.
• Compatible with both Windows and Mac
• Easily accessible without internet
• Free updates
• Unique visualization engine

3. Graillon

Graillon is an auto-tuner with the capacity to take your vocal performance to the next level. It comes with unique features, such as pitch-tracking modulation. This can help you change the input voice. Moreover, it also enables users to create choruses. In short, it makes the voice recording pure. In addition to pitch correction, Graillon also performs the pitch-shifting function. So, it’s an ideal solution for people looking for autotuning tools. Here is a brief overview of the pros of Graillon.

Advantages

• Incorporates 23ms of latency
• Maximizes the sound quality of output
• Optimized pitch shifter
• Ability to produce robotic sounds
• Free access to the tool
• Allows altering the vocal pitch
• Compatibility with all mainstream operating systems including Windows, Mac, Linux, and others
• Simple interface
• Equipped with bit crusher
• A full edition version is also available, which provides state-of-the-art features

Part 3: How to AutoTune Your Voice for Free with GSnap on Audacity?

GSnap is a famous plugin for autotuning audio recordings in Audacity. This plugin is free and can be easily installed on Windows, Mac, and Linux operating systems. If you are wondering how to install and use this plugin to autotune your voice in Audacity, the step-by-step guide highlights the process below.

Step 1: Install GSnap

Access the web link https://www.gvst.co.uk/gsnap.htm and click on download GSnap. Choose the GSnap version that matches your operating system.

Note: Audacity must be installed on your computer before the GSnap plugin is downloaded. Plus, the plugin will be downloaded in a zipped file. So, make sure you have an application installed on your device to unzip the downloaded file.

Step 2: Copy GSnap

Navigate to the download folder and right-click on the zipped GSnap option. Select extract here from the menu and copy the file named GSnap.dll.

Step 3: Paste the copied file

Navigate the plugins folder of Audacity and paste the copied file into the folder.

Step 3: Add plugin

Open Audacity and locate the Effects tab on a recording window. Select add/remove plug-ins, click on the GSnap option, and press enable button.

Note: The GSnap plugin will appear in the list under the effects tab and let you autotune your voice recording. You need to configure settings in a GSnap to get the fine-tuned voice.

For the detailed information, you can check the tutorial about how to add and set up GSnap plugin in Audacity.

Conclusion

Human voices and inputs from musical instruments are not perfect by default. Voice recordings in Audacity are no exception. They also need to be processed to enhance the vocal presentation. So, you need to tune the vocals in one way or another. This article mentions free Audacity autotune tools like GSnap to produce better sounds.

02 Top 3 Best Free Autotune Plugins for Audacity

03 How to AutoTune Your Voice for Free with GSnap on Audacity?

Part 1: What is Auto Tune and How Does It Work?

Autotune is a tool that enables you to adjust the pitch of the audio song or recording. It was launched in 1997. The plugin enjoys a trademark from Antares Audio Technologies. It automatically corrects the out-of-tune vocals in your recording.So, if you are struggling with tuning issues after recording a song in software like Audacity, this Audacity autotune tool can help.

Using autotune plugins is one of the best options to autotune songs in Audacity. They are becoming increasingly popular among singers, music producers, and others. Do you want to know why audio recordings need to be tuned and how they are adjusted using autotune? Here’s the answer.

There are high chances of multiple frequencies becoming intertwined when recording audio. Autotune detects the frequencies that are intertwined and splits them into single frequencies. So, the over-tuned vocals are isolated. In brief, autotune is the process of correcting vocal pitch. There are several plugins that can help you deal with tuning issues on piano, guitar, and other musical instruments.

Part 2: Top 3 Best Free Autotune Plugins for Audacity

Audacity comes with built-in audio recording and editing tools. It also allows you to mix different audios. Plus, you can also cut, split, and splice audio files in this amazing software. However, if you are recording a song in Audacity, it won’t be autotuned. Moreover, you cannot auto-correct the song’s pitch by default. So, you need to install autotune plugins for Audacity recording to enhance your vocal performance.

There are a number of plugins that enable you to fine-tune audios in Audacity. If you are interested in mastering the art of autotune using plugins, we have handpicked the following three best free autotune plugins for Audacity. Let’s get into them one by one.

1. GSnap

GSnap is a free audacity autotune plugin offered by GVST. It enables users to fine-tune the vocalist’s pitch, which is also a very easy and quick process. So, you can refine out-of-tune audio using GSnap. The correction mechanism is simple. First, it identifies over-tuned frequencies and then corrects them. Do you want to know more about GSnap and its advantages? If yes, we have summarized all its features in the list below.

Advantages

• GSnap enables you to configure both high and low frequency to offer the best pitch-correction mechanism.
• Background noise can be filtered out by configuring decibel settings.
• Allows controlling the parameters of a vocal performance through Musical Instrument Digital Interface (MIDI).
• GSnap lets you control the pace.
• Enables calibrating tune
• Free and easily accessible
• Available for Windows operating systems
• Maximum pitch bend can be set
• Customizable speed parameters
• Tune calibration

2. MAutoPitch

MAutoPitch provides automatic tuning for audio recording. This plugin comes with a simple yet intuitive interface to facilitate users. It supports pitch correction for all mainstream musical instruments and vocals. In addition to autotuning, MAuto Pitch is also known for offering creativity in your audio recordings. Stereo expansion is one of the creative features provided in this plugin. Furthermore, it also incorporates formant shift.

It applies the channel separation technique to tune the vocals. Moreover, it incorporates a MIDI controller that enables you to control parameters in real-time audio recording. MAutoPitch offers the following benefits to the users.

Advantages

• Offers safety brick wall limiters to limit audio output to a standardized threshold.
• Utilizes efficient and robust algorithms to cope up with fast computers.
• Advanced GUI to maximize flexibility.
• It includes automatic gain compensation to align input loudness with output loudness.
• Compatible with both Windows and Mac
• Easily accessible without internet
• Free updates
• Unique visualization engine

3. Graillon

Graillon is an auto-tuner with the capacity to take your vocal performance to the next level. It comes with unique features, such as pitch-tracking modulation. This can help you change the input voice. Moreover, it also enables users to create choruses. In short, it makes the voice recording pure. In addition to pitch correction, Graillon also performs the pitch-shifting function. So, it’s an ideal solution for people looking for autotuning tools. Here is a brief overview of the pros of Graillon.

Advantages

• Incorporates 23ms of latency
• Maximizes the sound quality of output
• Optimized pitch shifter
• Ability to produce robotic sounds
• Free access to the tool
• Allows altering the vocal pitch
• Compatibility with all mainstream operating systems including Windows, Mac, Linux, and others
• Simple interface
• Equipped with bit crusher
• A full edition version is also available, which provides state-of-the-art features

Part 3: How to AutoTune Your Voice for Free with GSnap on Audacity?

GSnap is a famous plugin for autotuning audio recordings in Audacity. This plugin is free and can be easily installed on Windows, Mac, and Linux operating systems. If you are wondering how to install and use this plugin to autotune your voice in Audacity, the step-by-step guide highlights the process below.

Step 1: Install GSnap

Access the web link https://www.gvst.co.uk/gsnap.htm and click on download GSnap. Choose the GSnap version that matches your operating system.

Note: Audacity must be installed on your computer before the GSnap plugin is downloaded. Plus, the plugin will be downloaded in a zipped file. So, make sure you have an application installed on your device to unzip the downloaded file.

Step 2: Copy GSnap

Navigate to the download folder and right-click on the zipped GSnap option. Select extract here from the menu and copy the file named GSnap.dll.

Step 3: Paste the copied file

Navigate the plugins folder of Audacity and paste the copied file into the folder.

Step 3: Add plugin

Open Audacity and locate the Effects tab on a recording window. Select add/remove plug-ins, click on the GSnap option, and press enable button.

Note: The GSnap plugin will appear in the list under the effects tab and let you autotune your voice recording. You need to configure settings in a GSnap to get the fine-tuned voice.

For the detailed information, you can check the tutorial about how to add and set up GSnap plugin in Audacity.

Conclusion

Human voices and inputs from musical instruments are not perfect by default. Voice recordings in Audacity are no exception. They also need to be processed to enhance the vocal presentation. So, you need to tune the vocals in one way or another. This article mentions free Audacity autotune tools like GSnap to produce better sounds.

“Audio Palette for Videos: Curating and Fine-Tuning Melodies in Filmora”

Any media files capture the attention of the viewers through its mesmerizing background music. Choose the perfect soundtracks for your video using an innovative application. You would have come across surplus programs that help to add background music to video. Select the reliable ones and create an interactive video for your needs.

In this article, you will find impressive facts on optimal methods to edit the background music with the help of a reliable application Filmora. It is an incredible app that customizes the videos precisely. Quickly surf the below content to learn more about the Filmora video editor and its relevant features in editing the background music of the media files.

In this article

01 [What is Filmora?](#Part 1)

02 [How to add background music with Filmora](#Part 2)

03 [How to edit background music with Filmora](#Part 3)

Part 1 What is Filmora?

The Filmora is a prestigious product from a giant software developer Wondershare. It is an awesome program that helps you to make reliable edits to the videos. You can use this app to create and edit video files professionally with the help of the in-built functionalities. There are options to import the media files into the working space and edit them by tapping the perfect controls.

This program offers you a platform to make your video interactive and mind-blowing to attract the viewers precisely. Use Filmora to make the best out of the video and due to its simple interface, you can work comfortably hassle-free.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

The remarkable features of Filmora video editor.

● Unleash your imagination by adding miraculous effects to the videos using its in-built filter effects, and transitions.

● Edit the background music of your video and add desired sound effects to engage the users optimally.

● Personalize the videos by changing their background using the Green Screen feature

● Enhance the audio tracks by enabling the audio ducking option

● Split the screens of your video to make it interactive precisely.

These are the incredible functionalities of the Filmora Video Editor application. You can use this program without any prior knowledge as the controls are displayed explicitly for quick access.

Part 2 How to add background music with Filmora

You can add background music to your memorable video captures using the Filmora application. Follow the below steps to carry out the process efficiently.

Step1 Download the application

Go to the official webpage of Filmora video editor and download the correct version of this tool. Then, import the desired media file into the working environment by tapping the Import Media Files option. Then, click and drag the uploaded file into the timeline to make further edits to it.

Step2 Add background music

Now, click the Audio option on the Menu and choose the sound effects at the left pane followed by the desired audio track in the right pane precisely. Right-click the chosen audio file and select Apply option from the pop-up.

You can also click and drag the selected audio file into the working timeline to add background music to the uploaded video.

Step3 Import the edited video

Finally, you can have a preview of the edited video using the Preview panel and click the Export button to share it directly to social media platforms or any local storage space.

The above steps will help you to perform the respective edits on the background music of the video professionally. During the export process, you can make changes to the file format, video resolution. Click the Settings button to work on the advanced options of the edited video.

Part 3 How to edit background music with Filmora

The Filmora applications help you to carry out desired edits on the imported video using its in-built features. To make audio edits, double click on the audio file to make changes on the adjustment sliders that pop up with various options like volume, pitch, fade in and out effects. You can also choose the Denoise option from the popup screen to remove the background noise from the audio clippings.

To customize the audio with advanced settings, then tap Customize option and make manual adjustments. You can manually move the sliders and adjust the values precisely for better results.

There are options to detach the audio signal from the clippings by making a right-click on the media file and selecting Detach Audio option. Add voiceover to the detached audio-video file by using the Record Voiceover feature. This brings great fun and makes your video interactive. You can also trim audio clips and add new tracks as per your requirements. Set the audio speed and duration by right-clicking the audio file.

Use the Audio Equalizer from the popup that opens after a double click on the audio file. Customize the audio track using the in-built settings available with the Equalizer. It includes default, Classic, Low Bass, Sparkle, Pop, soft, and techno. You can also use Audio Mixer and edit the audio signals in two modes like Stereo and surround. The Audio ducking feature in Filmora helps you to lower the background music for a specific duration to enhance the voice of the speaker in the video file. It is used to improve the quality of the audio signal optimally.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

Thus, in this article, you had a better understanding of how to add background music to video precisely. It is a perfect space to make desired edits on your video file using a sophisticated program Filmora video editor. It is a precise app that brings miraculous changes to the media files effortlessly. Create a quality media file using the Filmora video editor application. Connect with this incredible editor and make required changes on the media files to impress the audience in no time. Stay tuned for exciting facts about the best video edits with the help of the Filmora video editor tool. Choose the Filmora app and make reliable edits on memorable videos.

02 [How to add background music with Filmora](#Part 2)

03 [How to edit background music with Filmora](#Part 3)

Part 1 What is Filmora?

The Filmora is a prestigious product from a giant software developer Wondershare. It is an awesome program that helps you to make reliable edits to the videos. You can use this app to create and edit video files professionally with the help of the in-built functionalities. There are options to import the media files into the working space and edit them by tapping the perfect controls.

This program offers you a platform to make your video interactive and mind-blowing to attract the viewers precisely. Use Filmora to make the best out of the video and due to its simple interface, you can work comfortably hassle-free.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

The remarkable features of Filmora video editor.

● Unleash your imagination by adding miraculous effects to the videos using its in-built filter effects, and transitions.

● Edit the background music of your video and add desired sound effects to engage the users optimally.

● Personalize the videos by changing their background using the Green Screen feature

● Enhance the audio tracks by enabling the audio ducking option

● Split the screens of your video to make it interactive precisely.

These are the incredible functionalities of the Filmora Video Editor application. You can use this program without any prior knowledge as the controls are displayed explicitly for quick access.

Part 2 How to add background music with Filmora

You can add background music to your memorable video captures using the Filmora application. Follow the below steps to carry out the process efficiently.

Step1 Download the application

Go to the official webpage of Filmora video editor and download the correct version of this tool. Then, import the desired media file into the working environment by tapping the Import Media Files option. Then, click and drag the uploaded file into the timeline to make further edits to it.

Step2 Add background music

Now, click the Audio option on the Menu and choose the sound effects at the left pane followed by the desired audio track in the right pane precisely. Right-click the chosen audio file and select Apply option from the pop-up.

You can also click and drag the selected audio file into the working timeline to add background music to the uploaded video.

Step3 Import the edited video

Finally, you can have a preview of the edited video using the Preview panel and click the Export button to share it directly to social media platforms or any local storage space.

The above steps will help you to perform the respective edits on the background music of the video professionally. During the export process, you can make changes to the file format, video resolution. Click the Settings button to work on the advanced options of the edited video.

Part 3 How to edit background music with Filmora

The Filmora applications help you to carry out desired edits on the imported video using its in-built features. To make audio edits, double click on the audio file to make changes on the adjustment sliders that pop up with various options like volume, pitch, fade in and out effects. You can also choose the Denoise option from the popup screen to remove the background noise from the audio clippings.

To customize the audio with advanced settings, then tap Customize option and make manual adjustments. You can manually move the sliders and adjust the values precisely for better results.

There are options to detach the audio signal from the clippings by making a right-click on the media file and selecting Detach Audio option. Add voiceover to the detached audio-video file by using the Record Voiceover feature. This brings great fun and makes your video interactive. You can also trim audio clips and add new tracks as per your requirements. Set the audio speed and duration by right-clicking the audio file.

Use the Audio Equalizer from the popup that opens after a double click on the audio file. Customize the audio track using the in-built settings available with the Equalizer. It includes default, Classic, Low Bass, Sparkle, Pop, soft, and techno. You can also use Audio Mixer and edit the audio signals in two modes like Stereo and surround. The Audio ducking feature in Filmora helps you to lower the background music for a specific duration to enhance the voice of the speaker in the video file. It is used to improve the quality of the audio signal optimally.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

Thus, in this article, you had a better understanding of how to add background music to video precisely. It is a perfect space to make desired edits on your video file using a sophisticated program Filmora video editor. It is a precise app that brings miraculous changes to the media files effortlessly. Create a quality media file using the Filmora video editor application. Connect with this incredible editor and make required changes on the media files to impress the audience in no time. Stay tuned for exciting facts about the best video edits with the help of the Filmora video editor tool. Choose the Filmora app and make reliable edits on memorable videos.

02 [How to add background music with Filmora](#Part 2)

03 [How to edit background music with Filmora](#Part 3)

Part 1 What is Filmora?

The Filmora is a prestigious product from a giant software developer Wondershare. It is an awesome program that helps you to make reliable edits to the videos. You can use this app to create and edit video files professionally with the help of the in-built functionalities. There are options to import the media files into the working space and edit them by tapping the perfect controls.

This program offers you a platform to make your video interactive and mind-blowing to attract the viewers precisely. Use Filmora to make the best out of the video and due to its simple interface, you can work comfortably hassle-free.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

The remarkable features of Filmora video editor.

● Unleash your imagination by adding miraculous effects to the videos using its in-built filter effects, and transitions.

● Edit the background music of your video and add desired sound effects to engage the users optimally.

● Personalize the videos by changing their background using the Green Screen feature

● Enhance the audio tracks by enabling the audio ducking option

● Split the screens of your video to make it interactive precisely.

These are the incredible functionalities of the Filmora Video Editor application. You can use this program without any prior knowledge as the controls are displayed explicitly for quick access.

Part 2 How to add background music with Filmora

You can add background music to your memorable video captures using the Filmora application. Follow the below steps to carry out the process efficiently.

Step1 Download the application

Go to the official webpage of Filmora video editor and download the correct version of this tool. Then, import the desired media file into the working environment by tapping the Import Media Files option. Then, click and drag the uploaded file into the timeline to make further edits to it.

Step2 Add background music

Now, click the Audio option on the Menu and choose the sound effects at the left pane followed by the desired audio track in the right pane precisely. Right-click the chosen audio file and select Apply option from the pop-up.

You can also click and drag the selected audio file into the working timeline to add background music to the uploaded video.

Step3 Import the edited video

Finally, you can have a preview of the edited video using the Preview panel and click the Export button to share it directly to social media platforms or any local storage space.

The above steps will help you to perform the respective edits on the background music of the video professionally. During the export process, you can make changes to the file format, video resolution. Click the Settings button to work on the advanced options of the edited video.

Part 3 How to edit background music with Filmora

The Filmora applications help you to carry out desired edits on the imported video using its in-built features. To make audio edits, double click on the audio file to make changes on the adjustment sliders that pop up with various options like volume, pitch, fade in and out effects. You can also choose the Denoise option from the popup screen to remove the background noise from the audio clippings.

To customize the audio with advanced settings, then tap Customize option and make manual adjustments. You can manually move the sliders and adjust the values precisely for better results.

There are options to detach the audio signal from the clippings by making a right-click on the media file and selecting Detach Audio option. Add voiceover to the detached audio-video file by using the Record Voiceover feature. This brings great fun and makes your video interactive. You can also trim audio clips and add new tracks as per your requirements. Set the audio speed and duration by right-clicking the audio file.

Use the Audio Equalizer from the popup that opens after a double click on the audio file. Customize the audio track using the in-built settings available with the Equalizer. It includes default, Classic, Low Bass, Sparkle, Pop, soft, and techno. You can also use Audio Mixer and edit the audio signals in two modes like Stereo and surround. The Audio ducking feature in Filmora helps you to lower the background music for a specific duration to enhance the voice of the speaker in the video file. It is used to improve the quality of the audio signal optimally.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

Thus, in this article, you had a better understanding of how to add background music to video precisely. It is a perfect space to make desired edits on your video file using a sophisticated program Filmora video editor. It is a precise app that brings miraculous changes to the media files effortlessly. Create a quality media file using the Filmora video editor application. Connect with this incredible editor and make required changes on the media files to impress the audience in no time. Stay tuned for exciting facts about the best video edits with the help of the Filmora video editor tool. Choose the Filmora app and make reliable edits on memorable videos.

02 [How to add background music with Filmora](#Part 2)

03 [How to edit background music with Filmora](#Part 3)

Part 1 What is Filmora?

The Filmora is a prestigious product from a giant software developer Wondershare. It is an awesome program that helps you to make reliable edits to the videos. You can use this app to create and edit video files professionally with the help of the in-built functionalities. There are options to import the media files into the working space and edit them by tapping the perfect controls.

This program offers you a platform to make your video interactive and mind-blowing to attract the viewers precisely. Use Filmora to make the best out of the video and due to its simple interface, you can work comfortably hassle-free.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

The remarkable features of Filmora video editor.

● Unleash your imagination by adding miraculous effects to the videos using its in-built filter effects, and transitions.

● Edit the background music of your video and add desired sound effects to engage the users optimally.

● Personalize the videos by changing their background using the Green Screen feature

● Enhance the audio tracks by enabling the audio ducking option

● Split the screens of your video to make it interactive precisely.

These are the incredible functionalities of the Filmora Video Editor application. You can use this program without any prior knowledge as the controls are displayed explicitly for quick access.

Part 2 How to add background music with Filmora

You can add background music to your memorable video captures using the Filmora application. Follow the below steps to carry out the process efficiently.

Step1 Download the application

Go to the official webpage of Filmora video editor and download the correct version of this tool. Then, import the desired media file into the working environment by tapping the Import Media Files option. Then, click and drag the uploaded file into the timeline to make further edits to it.

Step2 Add background music

Now, click the Audio option on the Menu and choose the sound effects at the left pane followed by the desired audio track in the right pane precisely. Right-click the chosen audio file and select Apply option from the pop-up.

You can also click and drag the selected audio file into the working timeline to add background music to the uploaded video.

Step3 Import the edited video

Finally, you can have a preview of the edited video using the Preview panel and click the Export button to share it directly to social media platforms or any local storage space.

The above steps will help you to perform the respective edits on the background music of the video professionally. During the export process, you can make changes to the file format, video resolution. Click the Settings button to work on the advanced options of the edited video.

Part 3 How to edit background music with Filmora

The Filmora applications help you to carry out desired edits on the imported video using its in-built features. To make audio edits, double click on the audio file to make changes on the adjustment sliders that pop up with various options like volume, pitch, fade in and out effects. You can also choose the Denoise option from the popup screen to remove the background noise from the audio clippings.

To customize the audio with advanced settings, then tap Customize option and make manual adjustments. You can manually move the sliders and adjust the values precisely for better results.

There are options to detach the audio signal from the clippings by making a right-click on the media file and selecting Detach Audio option. Add voiceover to the detached audio-video file by using the Record Voiceover feature. This brings great fun and makes your video interactive. You can also trim audio clips and add new tracks as per your requirements. Set the audio speed and duration by right-clicking the audio file.

Use the Audio Equalizer from the popup that opens after a double click on the audio file. Customize the audio track using the in-built settings available with the Equalizer. It includes default, Classic, Low Bass, Sparkle, Pop, soft, and techno. You can also use Audio Mixer and edit the audio signals in two modes like Stereo and surround. The Audio ducking feature in Filmora helps you to lower the background music for a specific duration to enhance the voice of the speaker in the video file. It is used to improve the quality of the audio signal optimally.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Conclusion

Thus, in this article, you had a better understanding of how to add background music to video precisely. It is a perfect space to make desired edits on your video file using a sophisticated program Filmora video editor. It is a precise app that brings miraculous changes to the media files effortlessly. Create a quality media file using the Filmora video editor application. Connect with this incredible editor and make required changes on the media files to impress the audience in no time. Stay tuned for exciting facts about the best video edits with the help of the Filmora video editor tool. Choose the Filmora app and make reliable edits on memorable videos.

Also read: