The Premier Selection of Zero-Cost Sound Balancers

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Beat Blend Benders: A Curated List of Highest-Rated Audio-Synchronization Editors, 2023

Best Video Editing Apps to Sync Video to the Beat of a Song

Ollie Mattison

Mar 27, 2024• Proven solutions

Learning how to use music to your advantage during the video editing process takes a lot of practice. Making a cut and changing a shot in sync with the music can be more complicated than it sounds, since performing this video editing task requires a great deal of precision.

The videos that are synced to music are becoming more popular on social media, but before you can join the video creators who are creating this type of video, you must first find an app that enables you to sync a video to music beats effortlessly. In this article, I’ll share some best apps that you can use to sync videos to the beats of a song on macOS, Windows, iOS, and Android operating systems.

You may also like: How to Make Beats for Your Music Videos

9 Best Sync Video to Music Beat Apps

The complexity of the projects you want to create is the best way to decide which video editing app is the right choice for you. Moreover, the versatility of the video editing tools syncs video to music beat apps offer should help you determine if a video editor can cater to all your video editing needs. Here are some of the best sync video to music beat apps for Smartphones, Mac, and PC computers.

1. Wondershare Filmora

The new version of Filmora now features the Auto Beat Sync tool, which can be used to adjust the music with the video clips automatically. It would definitely save your time and make video editing easier for you. Check the below videos to learn more about Filmora’s Auto Beat Sync

Compatibility: macOS, Windows 7/8/8.1/10/11

Auto Beat Sync in Filmora is easy if you followed the video tutorial above. And here are the step by step tutorial for syncing video to music beat in Filmora:

• Select Auto Beat Sync: Choose Auto Beat Sync on the startup windows of Filmora.
• Import your video clip and music file to Filmora: drag and drop your media file to the media library.
• Choose Auto Beat Sync: Click on the Auto Beat Sync and Filmora will do the rest for you.
• You can also use Auto Highlight to make your video stands out.

If you still have more questions about syncing the beat in Filmora, you can also try Beat Syncing Tips for more information.

To improve your video editing and create a more stunning video, you can use the package Filmora & Filmstock video templates”, click the image below to see how to make your storytelling more engaging.

Filmstock Stock Media Library ](https://filmstock.wondershare.com/creative-theme-tutorial?spm=rs.filmora%5Fweb&source%5Fchannel=seo%5Farticle )

2. Premiere Elements

Price: $59.99 as a single app

Compatibility: macOS, Windows

Premiere Elements was created to simplify and automate the video editing process, which is the reason why syncing video clips to the beats of a song is a quick and easy process. You just have to add an audio file to the timeline and use the app’s Beat Detection feature to add markers to the song you selected. Customizing the settings of the Beat Detection option won’t take you much more than a few moments, but you should keep in mind that this tool is only available in the Expert view of the app. Furthermore, you can add new markers to an audio file from the Expert timeline by clicking on the Set Beat Marker icon if you want to make more cuts in your videos.

3. Cyberlink PowerDirector

Price: $99,99

Compatibility: Windows

Cyberlink PowerDirector lets you detect beats and generate markers both automatically and manually, which enables you to choose the method that is best suited for the project you are working on. After you add an audio file to the app’s timeline, you should right-click on it and chose the Use Automatic Music Beat Detection option.

You can then set the minimum amount of time between two beat markers and click on the Detect button if you want to add markers automatically. Optionally you can also add markers during playback manually by clicking on the Add button or using the A keyboard shortcut. When done you should click on the Apply button in the Automatic Music Beat Detection dialogue box and beat markers are going to be added to the timeline automatically. Nonetheless, you must edit all video clips you want to add to your project manually.

4. Adobe Premiere Pro

Price: $20,99 as a single app

Compatibility: macOS, Windows

Adobe Premiere Pro is much more than a simple sync video to music beat app because it is probably one of the most powerful video editing software products ever created. The process of editing a video to the beat of a song in Adobe Premiere Pro is a bit technical since you have to add all the markers to a sequence manually, set In and Out points for each clip you would like to add to the timeline, and automate that sequence so that the app can place your footage on the timeline in the order you selected. The BeatEdit extension can help you automate the process of adding beat markers to a sequence you created in Adobe Premiere Pro, but you must spend a hundred dollars on this extension if you want to generate markers automatically.

5. Final Cut Pro X

Price: $299,99

Compatibility: macOS

There are several different ways to sync videos to the music beats in Final Cut Pro X, but this video editing software doesn’t allow you to add beat markers automatically. Installing the BeatMark X application will enable you to add markers to the audio file you want to use as a soundtrack of your video and create an XML file you can import into Final Cut Pro X. However, automating the process of adding the footage and creating the cuts isn’t possible, although the video editor lets you use generators that somewhat simplify this process. FCPX is a professional video editing software equipped with all the tools that are necessary to create a full-feature film, which makes it a bad and expensive choice for inexperienced video editors who are just looking for a quick way to sync their videos to the beat of a song. For more studio-problem, please see this article: Practical Guide on How to Sync Audio and Video in Final Cut Pro X 2021 .

6. Splice

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later

In case you are recording a lot of videos with your iPhone or iPad, then Splice is one of the best video editing apps you can install on your device. Besides a versatile set of video editing tools that enable you to cut video clips or apply filters to them, the app also syncs videos to the beat of a song automatically and it adds transitions at the cuts to ensure a smoother flow of a video. Splice is also equipped with a huge library of royalty-free music and a built-in voice recorder which enables you to sync your videos to different genres of music or even to your own voice. The free version of the app, however, offers only limited options and you must opt for a monthly or annual subscription model in order to gain access to all of Splice’s features.

7.Quik – GoPro Video Editor

Price: Free

Compatibility: iOS 10.0 or later, Android 5.0 and up

The footage you record with a GoPro camera is going to look much better if you add some music to it. Quick lets you edit photos and videos captured with a broad range of Smartphones and GoPro cameras. There are more than twenty themes to choose from that contain transitions and predesigned graphics you can use to create different types of videos. This cross-platform app syncs all transitions you add between the video clips with the beats of the song you’re using as a soundtrack automatically, which enables you to create dynamic videos. Quick’s audio library contains over a hundred songs you can use for free, and you can also import music from iTunes, Dropbox, iCloud Drive, or Google Drive into the app. Once your videos are synced to the beats of a song you can share them to Instagram, Snapchat, Facebook, and various other social networks.

8. Beat Sync Maker

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later

Roland Corporation has manufactured some of the most iconic instruments in the history of electronic music, so it is no wonder that their Beat Sync Maker is one of the best apps DJs can use to create VJ-ing for their performances. The Auto Beat Sync technology detects beats automatically and syncs them with visual effects. You can choose from five types of visual effects, apply them to the videos you are mixing and adjust their intensity by simply dragging a slider left or right. What’s more, the app features 18 pre-installed video clips you can use for mixing and it also allows you to import video clips that are stored on your iPhone’s or iPad’s camera roll. The maximum duration of a video you can export from the free version of this app is limited to just thirty seconds, and you must make an in-app purchase if you want to create longer videos with Beat Sync Maker.

9. Magisto

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later , Android 5.0 and up , web-based

Video content creators who don’t want to go through the video editing process every time they want to post a new video on social media should consider using Magisto. The app’s AI automatically merges photos or videos and creates the content you can share on social media in just a few minutes. Magisto lets you choose from different editing styles like Memories, Pets or Holidays, and enables you to import footage from the device’s gallery or from Google Photos. The app also grants you access to a huge music library of songs you can use free of charge, but it also allows you to import the music you want to use in a video. Magisto generates videos automatically and syncs the cuts to the beats of the song you selected. The only downside is that you are not going to have any control over how the videos are synced to the beats or make any changes after a video is generated.

Conclusion

Sound and music are often overlooked during the video editing process, which often reduces the quality of a video. A simple video editing technique like syncing the cuts with beats of a song can help you create dynamic videos that gather thousands of views, shares, and likes on social media. However, having the right sync video to music beat app is essential if you want to create professional-looking videos. Which app are you going to use to sync videos to the beats of a song? Leave a comment and let us know.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Learning how to use music to your advantage during the video editing process takes a lot of practice. Making a cut and changing a shot in sync with the music can be more complicated than it sounds, since performing this video editing task requires a great deal of precision.

The videos that are synced to music are becoming more popular on social media, but before you can join the video creators who are creating this type of video, you must first find an app that enables you to sync a video to music beats effortlessly. In this article, I’ll share some best apps that you can use to sync videos to the beats of a song on macOS, Windows, iOS, and Android operating systems.

You may also like: How to Make Beats for Your Music Videos

9 Best Sync Video to Music Beat Apps

The complexity of the projects you want to create is the best way to decide which video editing app is the right choice for you. Moreover, the versatility of the video editing tools syncs video to music beat apps offer should help you determine if a video editor can cater to all your video editing needs. Here are some of the best sync video to music beat apps for Smartphones, Mac, and PC computers.

1. Wondershare Filmora

The new version of Filmora now features the Auto Beat Sync tool, which can be used to adjust the music with the video clips automatically. It would definitely save your time and make video editing easier for you. Check the below videos to learn more about Filmora’s Auto Beat Sync

Compatibility: macOS, Windows 7/8/8.1/10/11

Auto Beat Sync in Filmora is easy if you followed the video tutorial above. And here are the step by step tutorial for syncing video to music beat in Filmora:

• Select Auto Beat Sync: Choose Auto Beat Sync on the startup windows of Filmora.
• Import your video clip and music file to Filmora: drag and drop your media file to the media library.
• Choose Auto Beat Sync: Click on the Auto Beat Sync and Filmora will do the rest for you.
• You can also use Auto Highlight to make your video stands out.

If you still have more questions about syncing the beat in Filmora, you can also try Beat Syncing Tips for more information.

To improve your video editing and create a more stunning video, you can use the package Filmora & Filmstock video templates”, click the image below to see how to make your storytelling more engaging.

Filmstock Stock Media Library ](https://filmstock.wondershare.com/creative-theme-tutorial?spm=rs.filmora%5Fweb&source%5Fchannel=seo%5Farticle )

2. Premiere Elements

Price: $59.99 as a single app

Compatibility: macOS, Windows

Premiere Elements was created to simplify and automate the video editing process, which is the reason why syncing video clips to the beats of a song is a quick and easy process. You just have to add an audio file to the timeline and use the app’s Beat Detection feature to add markers to the song you selected. Customizing the settings of the Beat Detection option won’t take you much more than a few moments, but you should keep in mind that this tool is only available in the Expert view of the app. Furthermore, you can add new markers to an audio file from the Expert timeline by clicking on the Set Beat Marker icon if you want to make more cuts in your videos.

3. Cyberlink PowerDirector

Price: $99,99

Compatibility: Windows

Cyberlink PowerDirector lets you detect beats and generate markers both automatically and manually, which enables you to choose the method that is best suited for the project you are working on. After you add an audio file to the app’s timeline, you should right-click on it and chose the Use Automatic Music Beat Detection option.

You can then set the minimum amount of time between two beat markers and click on the Detect button if you want to add markers automatically. Optionally you can also add markers during playback manually by clicking on the Add button or using the A keyboard shortcut. When done you should click on the Apply button in the Automatic Music Beat Detection dialogue box and beat markers are going to be added to the timeline automatically. Nonetheless, you must edit all video clips you want to add to your project manually.

4. Adobe Premiere Pro

Price: $20,99 as a single app

Compatibility: macOS, Windows

Adobe Premiere Pro is much more than a simple sync video to music beat app because it is probably one of the most powerful video editing software products ever created. The process of editing a video to the beat of a song in Adobe Premiere Pro is a bit technical since you have to add all the markers to a sequence manually, set In and Out points for each clip you would like to add to the timeline, and automate that sequence so that the app can place your footage on the timeline in the order you selected. The BeatEdit extension can help you automate the process of adding beat markers to a sequence you created in Adobe Premiere Pro, but you must spend a hundred dollars on this extension if you want to generate markers automatically.

5. Final Cut Pro X

Price: $299,99

Compatibility: macOS

There are several different ways to sync videos to the music beats in Final Cut Pro X, but this video editing software doesn’t allow you to add beat markers automatically. Installing the BeatMark X application will enable you to add markers to the audio file you want to use as a soundtrack of your video and create an XML file you can import into Final Cut Pro X. However, automating the process of adding the footage and creating the cuts isn’t possible, although the video editor lets you use generators that somewhat simplify this process. FCPX is a professional video editing software equipped with all the tools that are necessary to create a full-feature film, which makes it a bad and expensive choice for inexperienced video editors who are just looking for a quick way to sync their videos to the beat of a song. For more studio-problem, please see this article: Practical Guide on How to Sync Audio and Video in Final Cut Pro X 2021 .

6. Splice

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later

In case you are recording a lot of videos with your iPhone or iPad, then Splice is one of the best video editing apps you can install on your device. Besides a versatile set of video editing tools that enable you to cut video clips or apply filters to them, the app also syncs videos to the beat of a song automatically and it adds transitions at the cuts to ensure a smoother flow of a video. Splice is also equipped with a huge library of royalty-free music and a built-in voice recorder which enables you to sync your videos to different genres of music or even to your own voice. The free version of the app, however, offers only limited options and you must opt for a monthly or annual subscription model in order to gain access to all of Splice’s features.

7.Quik – GoPro Video Editor

Price: Free

Compatibility: iOS 10.0 or later, Android 5.0 and up

The footage you record with a GoPro camera is going to look much better if you add some music to it. Quick lets you edit photos and videos captured with a broad range of Smartphones and GoPro cameras. There are more than twenty themes to choose from that contain transitions and predesigned graphics you can use to create different types of videos. This cross-platform app syncs all transitions you add between the video clips with the beats of the song you’re using as a soundtrack automatically, which enables you to create dynamic videos. Quick’s audio library contains over a hundred songs you can use for free, and you can also import music from iTunes, Dropbox, iCloud Drive, or Google Drive into the app. Once your videos are synced to the beats of a song you can share them to Instagram, Snapchat, Facebook, and various other social networks.

8. Beat Sync Maker

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later

Roland Corporation has manufactured some of the most iconic instruments in the history of electronic music, so it is no wonder that their Beat Sync Maker is one of the best apps DJs can use to create VJ-ing for their performances. The Auto Beat Sync technology detects beats automatically and syncs them with visual effects. You can choose from five types of visual effects, apply them to the videos you are mixing and adjust their intensity by simply dragging a slider left or right. What’s more, the app features 18 pre-installed video clips you can use for mixing and it also allows you to import video clips that are stored on your iPhone’s or iPad’s camera roll. The maximum duration of a video you can export from the free version of this app is limited to just thirty seconds, and you must make an in-app purchase if you want to create longer videos with Beat Sync Maker.

9. Magisto

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later , Android 5.0 and up , web-based

Video content creators who don’t want to go through the video editing process every time they want to post a new video on social media should consider using Magisto. The app’s AI automatically merges photos or videos and creates the content you can share on social media in just a few minutes. Magisto lets you choose from different editing styles like Memories, Pets or Holidays, and enables you to import footage from the device’s gallery or from Google Photos. The app also grants you access to a huge music library of songs you can use free of charge, but it also allows you to import the music you want to use in a video. Magisto generates videos automatically and syncs the cuts to the beats of the song you selected. The only downside is that you are not going to have any control over how the videos are synced to the beats or make any changes after a video is generated.

Conclusion

Sound and music are often overlooked during the video editing process, which often reduces the quality of a video. A simple video editing technique like syncing the cuts with beats of a song can help you create dynamic videos that gather thousands of views, shares, and likes on social media. However, having the right sync video to music beat app is essential if you want to create professional-looking videos. Which app are you going to use to sync videos to the beats of a song? Leave a comment and let us know.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Learning how to use music to your advantage during the video editing process takes a lot of practice. Making a cut and changing a shot in sync with the music can be more complicated than it sounds, since performing this video editing task requires a great deal of precision.

The videos that are synced to music are becoming more popular on social media, but before you can join the video creators who are creating this type of video, you must first find an app that enables you to sync a video to music beats effortlessly. In this article, I’ll share some best apps that you can use to sync videos to the beats of a song on macOS, Windows, iOS, and Android operating systems.

You may also like: How to Make Beats for Your Music Videos

9 Best Sync Video to Music Beat Apps

The complexity of the projects you want to create is the best way to decide which video editing app is the right choice for you. Moreover, the versatility of the video editing tools syncs video to music beat apps offer should help you determine if a video editor can cater to all your video editing needs. Here are some of the best sync video to music beat apps for Smartphones, Mac, and PC computers.

1. Wondershare Filmora

The new version of Filmora now features the Auto Beat Sync tool, which can be used to adjust the music with the video clips automatically. It would definitely save your time and make video editing easier for you. Check the below videos to learn more about Filmora’s Auto Beat Sync

Compatibility: macOS, Windows 7/8/8.1/10/11

Auto Beat Sync in Filmora is easy if you followed the video tutorial above. And here are the step by step tutorial for syncing video to music beat in Filmora:

• Select Auto Beat Sync: Choose Auto Beat Sync on the startup windows of Filmora.
• Import your video clip and music file to Filmora: drag and drop your media file to the media library.
• Choose Auto Beat Sync: Click on the Auto Beat Sync and Filmora will do the rest for you.
• You can also use Auto Highlight to make your video stands out.

If you still have more questions about syncing the beat in Filmora, you can also try Beat Syncing Tips for more information.

To improve your video editing and create a more stunning video, you can use the package Filmora & Filmstock video templates”, click the image below to see how to make your storytelling more engaging.

Filmstock Stock Media Library ](https://filmstock.wondershare.com/creative-theme-tutorial?spm=rs.filmora%5Fweb&source%5Fchannel=seo%5Farticle )

2. Premiere Elements

Price: $59.99 as a single app

Compatibility: macOS, Windows

Premiere Elements was created to simplify and automate the video editing process, which is the reason why syncing video clips to the beats of a song is a quick and easy process. You just have to add an audio file to the timeline and use the app’s Beat Detection feature to add markers to the song you selected. Customizing the settings of the Beat Detection option won’t take you much more than a few moments, but you should keep in mind that this tool is only available in the Expert view of the app. Furthermore, you can add new markers to an audio file from the Expert timeline by clicking on the Set Beat Marker icon if you want to make more cuts in your videos.

3. Cyberlink PowerDirector

Price: $99,99

Compatibility: Windows

Cyberlink PowerDirector lets you detect beats and generate markers both automatically and manually, which enables you to choose the method that is best suited for the project you are working on. After you add an audio file to the app’s timeline, you should right-click on it and chose the Use Automatic Music Beat Detection option.

You can then set the minimum amount of time between two beat markers and click on the Detect button if you want to add markers automatically. Optionally you can also add markers during playback manually by clicking on the Add button or using the A keyboard shortcut. When done you should click on the Apply button in the Automatic Music Beat Detection dialogue box and beat markers are going to be added to the timeline automatically. Nonetheless, you must edit all video clips you want to add to your project manually.

4. Adobe Premiere Pro

Price: $20,99 as a single app

Compatibility: macOS, Windows

Adobe Premiere Pro is much more than a simple sync video to music beat app because it is probably one of the most powerful video editing software products ever created. The process of editing a video to the beat of a song in Adobe Premiere Pro is a bit technical since you have to add all the markers to a sequence manually, set In and Out points for each clip you would like to add to the timeline, and automate that sequence so that the app can place your footage on the timeline in the order you selected. The BeatEdit extension can help you automate the process of adding beat markers to a sequence you created in Adobe Premiere Pro, but you must spend a hundred dollars on this extension if you want to generate markers automatically.

5. Final Cut Pro X

Price: $299,99

Compatibility: macOS

There are several different ways to sync videos to the music beats in Final Cut Pro X, but this video editing software doesn’t allow you to add beat markers automatically. Installing the BeatMark X application will enable you to add markers to the audio file you want to use as a soundtrack of your video and create an XML file you can import into Final Cut Pro X. However, automating the process of adding the footage and creating the cuts isn’t possible, although the video editor lets you use generators that somewhat simplify this process. FCPX is a professional video editing software equipped with all the tools that are necessary to create a full-feature film, which makes it a bad and expensive choice for inexperienced video editors who are just looking for a quick way to sync their videos to the beat of a song. For more studio-problem, please see this article: Practical Guide on How to Sync Audio and Video in Final Cut Pro X 2021 .

6. Splice

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later

In case you are recording a lot of videos with your iPhone or iPad, then Splice is one of the best video editing apps you can install on your device. Besides a versatile set of video editing tools that enable you to cut video clips or apply filters to them, the app also syncs videos to the beat of a song automatically and it adds transitions at the cuts to ensure a smoother flow of a video. Splice is also equipped with a huge library of royalty-free music and a built-in voice recorder which enables you to sync your videos to different genres of music or even to your own voice. The free version of the app, however, offers only limited options and you must opt for a monthly or annual subscription model in order to gain access to all of Splice’s features.

7.Quik – GoPro Video Editor

Price: Free

Compatibility: iOS 10.0 or later, Android 5.0 and up

The footage you record with a GoPro camera is going to look much better if you add some music to it. Quick lets you edit photos and videos captured with a broad range of Smartphones and GoPro cameras. There are more than twenty themes to choose from that contain transitions and predesigned graphics you can use to create different types of videos. This cross-platform app syncs all transitions you add between the video clips with the beats of the song you’re using as a soundtrack automatically, which enables you to create dynamic videos. Quick’s audio library contains over a hundred songs you can use for free, and you can also import music from iTunes, Dropbox, iCloud Drive, or Google Drive into the app. Once your videos are synced to the beats of a song you can share them to Instagram, Snapchat, Facebook, and various other social networks.

8. Beat Sync Maker

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later

Roland Corporation has manufactured some of the most iconic instruments in the history of electronic music, so it is no wonder that their Beat Sync Maker is one of the best apps DJs can use to create VJ-ing for their performances. The Auto Beat Sync technology detects beats automatically and syncs them with visual effects. You can choose from five types of visual effects, apply them to the videos you are mixing and adjust their intensity by simply dragging a slider left or right. What’s more, the app features 18 pre-installed video clips you can use for mixing and it also allows you to import video clips that are stored on your iPhone’s or iPad’s camera roll. The maximum duration of a video you can export from the free version of this app is limited to just thirty seconds, and you must make an in-app purchase if you want to create longer videos with Beat Sync Maker.

9. Magisto

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later , Android 5.0 and up , web-based

Video content creators who don’t want to go through the video editing process every time they want to post a new video on social media should consider using Magisto. The app’s AI automatically merges photos or videos and creates the content you can share on social media in just a few minutes. Magisto lets you choose from different editing styles like Memories, Pets or Holidays, and enables you to import footage from the device’s gallery or from Google Photos. The app also grants you access to a huge music library of songs you can use free of charge, but it also allows you to import the music you want to use in a video. Magisto generates videos automatically and syncs the cuts to the beats of the song you selected. The only downside is that you are not going to have any control over how the videos are synced to the beats or make any changes after a video is generated.

Conclusion

Sound and music are often overlooked during the video editing process, which often reduces the quality of a video. A simple video editing technique like syncing the cuts with beats of a song can help you create dynamic videos that gather thousands of views, shares, and likes on social media. However, having the right sync video to music beat app is essential if you want to create professional-looking videos. Which app are you going to use to sync videos to the beats of a song? Leave a comment and let us know.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Learning how to use music to your advantage during the video editing process takes a lot of practice. Making a cut and changing a shot in sync with the music can be more complicated than it sounds, since performing this video editing task requires a great deal of precision.

The videos that are synced to music are becoming more popular on social media, but before you can join the video creators who are creating this type of video, you must first find an app that enables you to sync a video to music beats effortlessly. In this article, I’ll share some best apps that you can use to sync videos to the beats of a song on macOS, Windows, iOS, and Android operating systems.

You may also like: How to Make Beats for Your Music Videos

9 Best Sync Video to Music Beat Apps

The complexity of the projects you want to create is the best way to decide which video editing app is the right choice for you. Moreover, the versatility of the video editing tools syncs video to music beat apps offer should help you determine if a video editor can cater to all your video editing needs. Here are some of the best sync video to music beat apps for Smartphones, Mac, and PC computers.

1. Wondershare Filmora

The new version of Filmora now features the Auto Beat Sync tool, which can be used to adjust the music with the video clips automatically. It would definitely save your time and make video editing easier for you. Check the below videos to learn more about Filmora’s Auto Beat Sync

Compatibility: macOS, Windows 7/8/8.1/10/11

Auto Beat Sync in Filmora is easy if you followed the video tutorial above. And here are the step by step tutorial for syncing video to music beat in Filmora:

• Select Auto Beat Sync: Choose Auto Beat Sync on the startup windows of Filmora.
• Import your video clip and music file to Filmora: drag and drop your media file to the media library.
• Choose Auto Beat Sync: Click on the Auto Beat Sync and Filmora will do the rest for you.
• You can also use Auto Highlight to make your video stands out.

If you still have more questions about syncing the beat in Filmora, you can also try Beat Syncing Tips for more information.

To improve your video editing and create a more stunning video, you can use the package Filmora & Filmstock video templates”, click the image below to see how to make your storytelling more engaging.

Filmstock Stock Media Library ](https://filmstock.wondershare.com/creative-theme-tutorial?spm=rs.filmora%5Fweb&source%5Fchannel=seo%5Farticle )

2. Premiere Elements

Price: $59.99 as a single app

Compatibility: macOS, Windows

Premiere Elements was created to simplify and automate the video editing process, which is the reason why syncing video clips to the beats of a song is a quick and easy process. You just have to add an audio file to the timeline and use the app’s Beat Detection feature to add markers to the song you selected. Customizing the settings of the Beat Detection option won’t take you much more than a few moments, but you should keep in mind that this tool is only available in the Expert view of the app. Furthermore, you can add new markers to an audio file from the Expert timeline by clicking on the Set Beat Marker icon if you want to make more cuts in your videos.

3. Cyberlink PowerDirector

Price: $99,99

Compatibility: Windows

Cyberlink PowerDirector lets you detect beats and generate markers both automatically and manually, which enables you to choose the method that is best suited for the project you are working on. After you add an audio file to the app’s timeline, you should right-click on it and chose the Use Automatic Music Beat Detection option.

You can then set the minimum amount of time between two beat markers and click on the Detect button if you want to add markers automatically. Optionally you can also add markers during playback manually by clicking on the Add button or using the A keyboard shortcut. When done you should click on the Apply button in the Automatic Music Beat Detection dialogue box and beat markers are going to be added to the timeline automatically. Nonetheless, you must edit all video clips you want to add to your project manually.

4. Adobe Premiere Pro

Price: $20,99 as a single app

Compatibility: macOS, Windows

Adobe Premiere Pro is much more than a simple sync video to music beat app because it is probably one of the most powerful video editing software products ever created. The process of editing a video to the beat of a song in Adobe Premiere Pro is a bit technical since you have to add all the markers to a sequence manually, set In and Out points for each clip you would like to add to the timeline, and automate that sequence so that the app can place your footage on the timeline in the order you selected. The BeatEdit extension can help you automate the process of adding beat markers to a sequence you created in Adobe Premiere Pro, but you must spend a hundred dollars on this extension if you want to generate markers automatically.

5. Final Cut Pro X

Price: $299,99

Compatibility: macOS

There are several different ways to sync videos to the music beats in Final Cut Pro X, but this video editing software doesn’t allow you to add beat markers automatically. Installing the BeatMark X application will enable you to add markers to the audio file you want to use as a soundtrack of your video and create an XML file you can import into Final Cut Pro X. However, automating the process of adding the footage and creating the cuts isn’t possible, although the video editor lets you use generators that somewhat simplify this process. FCPX is a professional video editing software equipped with all the tools that are necessary to create a full-feature film, which makes it a bad and expensive choice for inexperienced video editors who are just looking for a quick way to sync their videos to the beat of a song. For more studio-problem, please see this article: Practical Guide on How to Sync Audio and Video in Final Cut Pro X 2021 .

6. Splice

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later

In case you are recording a lot of videos with your iPhone or iPad, then Splice is one of the best video editing apps you can install on your device. Besides a versatile set of video editing tools that enable you to cut video clips or apply filters to them, the app also syncs videos to the beat of a song automatically and it adds transitions at the cuts to ensure a smoother flow of a video. Splice is also equipped with a huge library of royalty-free music and a built-in voice recorder which enables you to sync your videos to different genres of music or even to your own voice. The free version of the app, however, offers only limited options and you must opt for a monthly or annual subscription model in order to gain access to all of Splice’s features.

7.Quik – GoPro Video Editor

Price: Free

Compatibility: iOS 10.0 or later, Android 5.0 and up

The footage you record with a GoPro camera is going to look much better if you add some music to it. Quick lets you edit photos and videos captured with a broad range of Smartphones and GoPro cameras. There are more than twenty themes to choose from that contain transitions and predesigned graphics you can use to create different types of videos. This cross-platform app syncs all transitions you add between the video clips with the beats of the song you’re using as a soundtrack automatically, which enables you to create dynamic videos. Quick’s audio library contains over a hundred songs you can use for free, and you can also import music from iTunes, Dropbox, iCloud Drive, or Google Drive into the app. Once your videos are synced to the beats of a song you can share them to Instagram, Snapchat, Facebook, and various other social networks.

8. Beat Sync Maker

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later

Roland Corporation has manufactured some of the most iconic instruments in the history of electronic music, so it is no wonder that their Beat Sync Maker is one of the best apps DJs can use to create VJ-ing for their performances. The Auto Beat Sync technology detects beats automatically and syncs them with visual effects. You can choose from five types of visual effects, apply them to the videos you are mixing and adjust their intensity by simply dragging a slider left or right. What’s more, the app features 18 pre-installed video clips you can use for mixing and it also allows you to import video clips that are stored on your iPhone’s or iPad’s camera roll. The maximum duration of a video you can export from the free version of this app is limited to just thirty seconds, and you must make an in-app purchase if you want to create longer videos with Beat Sync Maker.

9. Magisto

Price: Free, but offers in-app purchases

Compatibility: iOS 11.0 or later , Android 5.0 and up , web-based

Video content creators who don’t want to go through the video editing process every time they want to post a new video on social media should consider using Magisto. The app’s AI automatically merges photos or videos and creates the content you can share on social media in just a few minutes. Magisto lets you choose from different editing styles like Memories, Pets or Holidays, and enables you to import footage from the device’s gallery or from Google Photos. The app also grants you access to a huge music library of songs you can use free of charge, but it also allows you to import the music you want to use in a video. Magisto generates videos automatically and syncs the cuts to the beats of the song you selected. The only downside is that you are not going to have any control over how the videos are synced to the beats or make any changes after a video is generated.

Conclusion

Sound and music are often overlooked during the video editing process, which often reduces the quality of a video. A simple video editing technique like syncing the cuts with beats of a song can help you create dynamic videos that gather thousands of views, shares, and likes on social media. However, having the right sync video to music beat app is essential if you want to create professional-looking videos. Which app are you going to use to sync videos to the beats of a song? Leave a comment and let us know.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ultimate Anime Character Reimaginings: Best Software for Desktop & Mobile Users

If you’re a die-hard anime fan and obsessed with some Japanese characters, you deserve the best anime voice changer. It can be quite hectic for some people to search for the right anime girl voice changer.

Just so you know, voice modifications go a long way rather than just gaming and streaming with anime voices for fun. One can even earn a nice fortune with anime background voices. Beginners could get some dollars per sentence, while many professionals can earn above a hundred dollars.

Sounds interesting? Then keep reading below to check out some of the best voice changers and how to use them! This article will guide you step-by-step, whether you wish to use Voicemod or Premier pro to create an anime voice.

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1: Change Voice into Anime With Voicemod

Voicemod is a free and popular anime voice changer that is famous among many ZOOM, Google Hangout and Duo users. It allows content creators and gamers to easily change voices into their favorite anime characters. Streaming is more enjoyable when coupled with the fun voice modification features! Currently, it supports Windows 7/8/10 64-bit computers.

Voicemod is a voice modifier that can be used with any streaming platform from Twitch to Omegle and several others. You can also add “effects” through the soundboard and alter background effects as per your need! There is a surprisingly vast library, and you can even make alterations in the character’s voice, amazing right? Whether you’re a PUBG fan or you belong from the CS: GO or Fortnite teams, Voicemod works with a wide range of games.

You should be a Voicemod PRO user, however, if not, you can still learn these steps and become one easily. Hence, to enjoy the features Voicemode enables you with, get started with the guidelines below!

Firstly, you need to access Voicemod PRO and tap onto the “Voice Maker” option from the list.

We will choose accordingly from the various options Voicemod PRO provides, such as robotic voice or any other fictional character. You will tap on the “Double Pitch” generator button for the users looking for an anime voice changer.

To configure the Anime voice, you will have to adjust Pitch: Mix I 100%, Pitch I 80%, and Humanizer I OFF. On the other hand, Mix II 100%, Pitch II 70%, and Humanizer II ON.

That’s it! You’re all set now to enjoy the game with the perfect anime voice. Sound like your favorite anime character and impress other fans and weebs out there!

To configure the Anime voice, you will have to adjust Pitch as follows: Mix I 100%, Pitch I 80%, and Humanizer I OFF. On the other hand, Mix II 100%, Pitch II 70%, and Humanizer II ON.

Part 2: Make an Anime Voice in Adobe Premiere

Adobe Premiere is a software application for video content creators and editors. In the case of TV series or dramas, even professional actors often need a bit of pitch adjustment to voices. Pitch shifting is not only made easy but accessible to all as well in Premiere Pro. Below all the key steps are highlighted, which provide you with the precise process of making anime voice in PR.

Firstly, the audio recording needs to be uploaded to Adobe Premiere Pro. We can also directly record the audio in the Premiere Pro timeline.

Secondly, we will choose the effect we wish to apply. In this case, the “Pitch Shifter” effect is applied. Tap on the effects list, choose “pitch shifter,” and then drag down to the audio file.

Next, it’s time to adjust the pitch as per the need. We can shift the pitch higher for a sharp female voice or down for heavier vocals. If you now have achieved the desired results, you know how to use this anime girl voice changer.

Besides the Pitch Shifter feature in Premiere Pro, you can also use the equalizer to adjust the voice too. With an equalizer, you can give nasal effects to your audio. This effect is usually a popular trend with anime voice changers. To give nasal effects, you have to load the EQ first. Next, you need to cut or boost the frequencies as per your need. The limit provided is usually 1k to 1.2k Hz.

These are the main effects one gets to choose from when using Adobe Premiere.

Part 3: Cartoon and Animate Your Voice with Adobe Audition in Real-Time

Now Adobe Audition is another Adobe application specifically made for editing audio content. Most users would advise you of this anime girl voice changer because of its ease of use. Also the fact that it is specifically for audio adjustments makes it more favorable.

Adobe Audition is a digital audio workstation and an amazing option for those wishing to make a career in anime voice changing. Whether you wish to lower pitch, change echo levels, or reverb your voice recording, it has a huge library of effects.

To use this real-time voice changer, the first tab you have to open is the top-left “Multitrack” button and create a new multitrack session.

In track 1, tap the “R” button which will turn your microphone for voice recording. Next, tap the “I” button to hear the effects you apply while editing.

Choose your desired effect from the library tab and test it while you adjust other settings.

And that’s it! It is that easy to make settings in Adobe Audition.

Audition provides you a toolkit, in which you can add features and presets for further work. This anime voice changer is professional-level software that allows anime lovers to stream for fun and work with outstanding features.

You can also create amazingly smooth podcasts and design several effects. Now, what’s better than creating and designing your sound effects?

Surely now, many of your confusions regarding anime voice changers would be cleared. Next up on the list is a highly portable mobile app.

Part 4: Create Anime Voice on Mobile with Voice Changer App

1. Voice Changer - anime voice effects changing the game

Available for: Android

With this one, you can easily edit, mix, or disguise voices and get all your content edits done right on your phone. It is a mix of features provided in recording apps and voice editors. It has a wide range of fictional characters, albeit not as much as the other software suggested above.

You can type in a character you wish to modify your voice and apply it to your recording. This one’s mostly used by teenagers and streaming enthusiasts just for fun and is nice entertainment on the go. So if you’re looking for a memory-friendly anime girl voice changer, don’t worry! Even the smallest kid in the house can learn to use it.

2. Voice Changer Plus

Available for: iPad

This is another creative mobile voice changer app for iPad users. Widen your horizons with the amazing sound-changing options provided in this software. Voice changer plus is a step ahead in the work of anime edits. While being more of an entertainment app, you can also work with this smoothly. Whether you’re a beginner at using anime voice changers or not, don’t worry. This application is really easy to use and smoothly works on sufficient memory. Listen to your voice backward or reverbed with this creative tool.

Since now you have a nice idea of how the most popular anime voice changers work, you’re ready! Whether you’re looking to make a career in anime background voicing or just streaming for fun, go ahead! All the applications suggested here are super-easy to use and even free.

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1: Change Voice into Anime With Voicemod

Voicemod is a free and popular anime voice changer that is famous among many ZOOM, Google Hangout and Duo users. It allows content creators and gamers to easily change voices into their favorite anime characters. Streaming is more enjoyable when coupled with the fun voice modification features! Currently, it supports Windows 7/8/10 64-bit computers.

Voicemod is a voice modifier that can be used with any streaming platform from Twitch to Omegle and several others. You can also add “effects” through the soundboard and alter background effects as per your need! There is a surprisingly vast library, and you can even make alterations in the character’s voice, amazing right? Whether you’re a PUBG fan or you belong from the CS: GO or Fortnite teams, Voicemod works with a wide range of games.

You should be a Voicemod PRO user, however, if not, you can still learn these steps and become one easily. Hence, to enjoy the features Voicemode enables you with, get started with the guidelines below!

Firstly, you need to access Voicemod PRO and tap onto the “Voice Maker” option from the list.

We will choose accordingly from the various options Voicemod PRO provides, such as robotic voice or any other fictional character. You will tap on the “Double Pitch” generator button for the users looking for an anime voice changer.

To configure the Anime voice, you will have to adjust Pitch: Mix I 100%, Pitch I 80%, and Humanizer I OFF. On the other hand, Mix II 100%, Pitch II 70%, and Humanizer II ON.

That’s it! You’re all set now to enjoy the game with the perfect anime voice. Sound like your favorite anime character and impress other fans and weebs out there!

To configure the Anime voice, you will have to adjust Pitch as follows: Mix I 100%, Pitch I 80%, and Humanizer I OFF. On the other hand, Mix II 100%, Pitch II 70%, and Humanizer II ON.

Part 2: Make an Anime Voice in Adobe Premiere

Adobe Premiere is a software application for video content creators and editors. In the case of TV series or dramas, even professional actors often need a bit of pitch adjustment to voices. Pitch shifting is not only made easy but accessible to all as well in Premiere Pro. Below all the key steps are highlighted, which provide you with the precise process of making anime voice in PR.

Firstly, the audio recording needs to be uploaded to Adobe Premiere Pro. We can also directly record the audio in the Premiere Pro timeline.

Secondly, we will choose the effect we wish to apply. In this case, the “Pitch Shifter” effect is applied. Tap on the effects list, choose “pitch shifter,” and then drag down to the audio file.

Next, it’s time to adjust the pitch as per the need. We can shift the pitch higher for a sharp female voice or down for heavier vocals. If you now have achieved the desired results, you know how to use this anime girl voice changer.

Besides the Pitch Shifter feature in Premiere Pro, you can also use the equalizer to adjust the voice too. With an equalizer, you can give nasal effects to your audio. This effect is usually a popular trend with anime voice changers. To give nasal effects, you have to load the EQ first. Next, you need to cut or boost the frequencies as per your need. The limit provided is usually 1k to 1.2k Hz.

These are the main effects one gets to choose from when using Adobe Premiere.

Part 3: Cartoon and Animate Your Voice with Adobe Audition in Real-Time

Now Adobe Audition is another Adobe application specifically made for editing audio content. Most users would advise you of this anime girl voice changer because of its ease of use. Also the fact that it is specifically for audio adjustments makes it more favorable.

Adobe Audition is a digital audio workstation and an amazing option for those wishing to make a career in anime voice changing. Whether you wish to lower pitch, change echo levels, or reverb your voice recording, it has a huge library of effects.

To use this real-time voice changer, the first tab you have to open is the top-left “Multitrack” button and create a new multitrack session.

In track 1, tap the “R” button which will turn your microphone for voice recording. Next, tap the “I” button to hear the effects you apply while editing.

Choose your desired effect from the library tab and test it while you adjust other settings.

And that’s it! It is that easy to make settings in Adobe Audition.

Audition provides you a toolkit, in which you can add features and presets for further work. This anime voice changer is professional-level software that allows anime lovers to stream for fun and work with outstanding features.

You can also create amazingly smooth podcasts and design several effects. Now, what’s better than creating and designing your sound effects?

Surely now, many of your confusions regarding anime voice changers would be cleared. Next up on the list is a highly portable mobile app.

Part 4: Create Anime Voice on Mobile with Voice Changer App

1. Voice Changer - anime voice effects changing the game

Available for: Android

With this one, you can easily edit, mix, or disguise voices and get all your content edits done right on your phone. It is a mix of features provided in recording apps and voice editors. It has a wide range of fictional characters, albeit not as much as the other software suggested above.

You can type in a character you wish to modify your voice and apply it to your recording. This one’s mostly used by teenagers and streaming enthusiasts just for fun and is nice entertainment on the go. So if you’re looking for a memory-friendly anime girl voice changer, don’t worry! Even the smallest kid in the house can learn to use it.

2. Voice Changer Plus

Available for: iPad

This is another creative mobile voice changer app for iPad users. Widen your horizons with the amazing sound-changing options provided in this software. Voice changer plus is a step ahead in the work of anime edits. While being more of an entertainment app, you can also work with this smoothly. Whether you’re a beginner at using anime voice changers or not, don’t worry. This application is really easy to use and smoothly works on sufficient memory. Listen to your voice backward or reverbed with this creative tool.

Since now you have a nice idea of how the most popular anime voice changers work, you’re ready! Whether you’re looking to make a career in anime background voicing or just streaming for fun, go ahead! All the applications suggested here are super-easy to use and even free.

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1: Change Voice into Anime With Voicemod

Voicemod is a free and popular anime voice changer that is famous among many ZOOM, Google Hangout and Duo users. It allows content creators and gamers to easily change voices into their favorite anime characters. Streaming is more enjoyable when coupled with the fun voice modification features! Currently, it supports Windows 7/8/10 64-bit computers.

Voicemod is a voice modifier that can be used with any streaming platform from Twitch to Omegle and several others. You can also add “effects” through the soundboard and alter background effects as per your need! There is a surprisingly vast library, and you can even make alterations in the character’s voice, amazing right? Whether you’re a PUBG fan or you belong from the CS: GO or Fortnite teams, Voicemod works with a wide range of games.

You should be a Voicemod PRO user, however, if not, you can still learn these steps and become one easily. Hence, to enjoy the features Voicemode enables you with, get started with the guidelines below!

Firstly, you need to access Voicemod PRO and tap onto the “Voice Maker” option from the list.

We will choose accordingly from the various options Voicemod PRO provides, such as robotic voice or any other fictional character. You will tap on the “Double Pitch” generator button for the users looking for an anime voice changer.

To configure the Anime voice, you will have to adjust Pitch: Mix I 100%, Pitch I 80%, and Humanizer I OFF. On the other hand, Mix II 100%, Pitch II 70%, and Humanizer II ON.

That’s it! You’re all set now to enjoy the game with the perfect anime voice. Sound like your favorite anime character and impress other fans and weebs out there!

To configure the Anime voice, you will have to adjust Pitch as follows: Mix I 100%, Pitch I 80%, and Humanizer I OFF. On the other hand, Mix II 100%, Pitch II 70%, and Humanizer II ON.

Part 2: Make an Anime Voice in Adobe Premiere

Adobe Premiere is a software application for video content creators and editors. In the case of TV series or dramas, even professional actors often need a bit of pitch adjustment to voices. Pitch shifting is not only made easy but accessible to all as well in Premiere Pro. Below all the key steps are highlighted, which provide you with the precise process of making anime voice in PR.

Firstly, the audio recording needs to be uploaded to Adobe Premiere Pro. We can also directly record the audio in the Premiere Pro timeline.

Secondly, we will choose the effect we wish to apply. In this case, the “Pitch Shifter” effect is applied. Tap on the effects list, choose “pitch shifter,” and then drag down to the audio file.

Next, it’s time to adjust the pitch as per the need. We can shift the pitch higher for a sharp female voice or down for heavier vocals. If you now have achieved the desired results, you know how to use this anime girl voice changer.

Besides the Pitch Shifter feature in Premiere Pro, you can also use the equalizer to adjust the voice too. With an equalizer, you can give nasal effects to your audio. This effect is usually a popular trend with anime voice changers. To give nasal effects, you have to load the EQ first. Next, you need to cut or boost the frequencies as per your need. The limit provided is usually 1k to 1.2k Hz.

These are the main effects one gets to choose from when using Adobe Premiere.

Part 3: Cartoon and Animate Your Voice with Adobe Audition in Real-Time

Now Adobe Audition is another Adobe application specifically made for editing audio content. Most users would advise you of this anime girl voice changer because of its ease of use. Also the fact that it is specifically for audio adjustments makes it more favorable.

Adobe Audition is a digital audio workstation and an amazing option for those wishing to make a career in anime voice changing. Whether you wish to lower pitch, change echo levels, or reverb your voice recording, it has a huge library of effects.

To use this real-time voice changer, the first tab you have to open is the top-left “Multitrack” button and create a new multitrack session.

In track 1, tap the “R” button which will turn your microphone for voice recording. Next, tap the “I” button to hear the effects you apply while editing.

Choose your desired effect from the library tab and test it while you adjust other settings.

And that’s it! It is that easy to make settings in Adobe Audition.

Audition provides you a toolkit, in which you can add features and presets for further work. This anime voice changer is professional-level software that allows anime lovers to stream for fun and work with outstanding features.

You can also create amazingly smooth podcasts and design several effects. Now, what’s better than creating and designing your sound effects?

Surely now, many of your confusions regarding anime voice changers would be cleared. Next up on the list is a highly portable mobile app.

Part 4: Create Anime Voice on Mobile with Voice Changer App

1. Voice Changer - anime voice effects changing the game

Available for: Android

With this one, you can easily edit, mix, or disguise voices and get all your content edits done right on your phone. It is a mix of features provided in recording apps and voice editors. It has a wide range of fictional characters, albeit not as much as the other software suggested above.

You can type in a character you wish to modify your voice and apply it to your recording. This one’s mostly used by teenagers and streaming enthusiasts just for fun and is nice entertainment on the go. So if you’re looking for a memory-friendly anime girl voice changer, don’t worry! Even the smallest kid in the house can learn to use it.

2. Voice Changer Plus

Available for: iPad

This is another creative mobile voice changer app for iPad users. Widen your horizons with the amazing sound-changing options provided in this software. Voice changer plus is a step ahead in the work of anime edits. While being more of an entertainment app, you can also work with this smoothly. Whether you’re a beginner at using anime voice changers or not, don’t worry. This application is really easy to use and smoothly works on sufficient memory. Listen to your voice backward or reverbed with this creative tool.

Since now you have a nice idea of how the most popular anime voice changers work, you’re ready! Whether you’re looking to make a career in anime background voicing or just streaming for fun, go ahead! All the applications suggested here are super-easy to use and even free.

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1: Change Voice into Anime With Voicemod

Voicemod is a free and popular anime voice changer that is famous among many ZOOM, Google Hangout and Duo users. It allows content creators and gamers to easily change voices into their favorite anime characters. Streaming is more enjoyable when coupled with the fun voice modification features! Currently, it supports Windows 7/8/10 64-bit computers.

Voicemod is a voice modifier that can be used with any streaming platform from Twitch to Omegle and several others. You can also add “effects” through the soundboard and alter background effects as per your need! There is a surprisingly vast library, and you can even make alterations in the character’s voice, amazing right? Whether you’re a PUBG fan or you belong from the CS: GO or Fortnite teams, Voicemod works with a wide range of games.

You should be a Voicemod PRO user, however, if not, you can still learn these steps and become one easily. Hence, to enjoy the features Voicemode enables you with, get started with the guidelines below!

Firstly, you need to access Voicemod PRO and tap onto the “Voice Maker” option from the list.

We will choose accordingly from the various options Voicemod PRO provides, such as robotic voice or any other fictional character. You will tap on the “Double Pitch” generator button for the users looking for an anime voice changer.

To configure the Anime voice, you will have to adjust Pitch: Mix I 100%, Pitch I 80%, and Humanizer I OFF. On the other hand, Mix II 100%, Pitch II 70%, and Humanizer II ON.

That’s it! You’re all set now to enjoy the game with the perfect anime voice. Sound like your favorite anime character and impress other fans and weebs out there!

To configure the Anime voice, you will have to adjust Pitch as follows: Mix I 100%, Pitch I 80%, and Humanizer I OFF. On the other hand, Mix II 100%, Pitch II 70%, and Humanizer II ON.

Part 2: Make an Anime Voice in Adobe Premiere

Adobe Premiere is a software application for video content creators and editors. In the case of TV series or dramas, even professional actors often need a bit of pitch adjustment to voices. Pitch shifting is not only made easy but accessible to all as well in Premiere Pro. Below all the key steps are highlighted, which provide you with the precise process of making anime voice in PR.

Firstly, the audio recording needs to be uploaded to Adobe Premiere Pro. We can also directly record the audio in the Premiere Pro timeline.

Secondly, we will choose the effect we wish to apply. In this case, the “Pitch Shifter” effect is applied. Tap on the effects list, choose “pitch shifter,” and then drag down to the audio file.

Next, it’s time to adjust the pitch as per the need. We can shift the pitch higher for a sharp female voice or down for heavier vocals. If you now have achieved the desired results, you know how to use this anime girl voice changer.

Besides the Pitch Shifter feature in Premiere Pro, you can also use the equalizer to adjust the voice too. With an equalizer, you can give nasal effects to your audio. This effect is usually a popular trend with anime voice changers. To give nasal effects, you have to load the EQ first. Next, you need to cut or boost the frequencies as per your need. The limit provided is usually 1k to 1.2k Hz.

These are the main effects one gets to choose from when using Adobe Premiere.

Part 3: Cartoon and Animate Your Voice with Adobe Audition in Real-Time

Now Adobe Audition is another Adobe application specifically made for editing audio content. Most users would advise you of this anime girl voice changer because of its ease of use. Also the fact that it is specifically for audio adjustments makes it more favorable.

Adobe Audition is a digital audio workstation and an amazing option for those wishing to make a career in anime voice changing. Whether you wish to lower pitch, change echo levels, or reverb your voice recording, it has a huge library of effects.

To use this real-time voice changer, the first tab you have to open is the top-left “Multitrack” button and create a new multitrack session.

In track 1, tap the “R” button which will turn your microphone for voice recording. Next, tap the “I” button to hear the effects you apply while editing.

Choose your desired effect from the library tab and test it while you adjust other settings.

And that’s it! It is that easy to make settings in Adobe Audition.

Audition provides you a toolkit, in which you can add features and presets for further work. This anime voice changer is professional-level software that allows anime lovers to stream for fun and work with outstanding features.

You can also create amazingly smooth podcasts and design several effects. Now, what’s better than creating and designing your sound effects?

Surely now, many of your confusions regarding anime voice changers would be cleared. Next up on the list is a highly portable mobile app.

Part 4: Create Anime Voice on Mobile with Voice Changer App

1. Voice Changer - anime voice effects changing the game

Available for: Android

With this one, you can easily edit, mix, or disguise voices and get all your content edits done right on your phone. It is a mix of features provided in recording apps and voice editors. It has a wide range of fictional characters, albeit not as much as the other software suggested above.

You can type in a character you wish to modify your voice and apply it to your recording. This one’s mostly used by teenagers and streaming enthusiasts just for fun and is nice entertainment on the go. So if you’re looking for a memory-friendly anime girl voice changer, don’t worry! Even the smallest kid in the house can learn to use it.

2. Voice Changer Plus

Available for: iPad

This is another creative mobile voice changer app for iPad users. Widen your horizons with the amazing sound-changing options provided in this software. Voice changer plus is a step ahead in the work of anime edits. While being more of an entertainment app, you can also work with this smoothly. Whether you’re a beginner at using anime voice changers or not, don’t worry. This application is really easy to use and smoothly works on sufficient memory. Listen to your voice backward or reverbed with this creative tool.

Since now you have a nice idea of how the most popular anime voice changers work, you’re ready! Whether you’re looking to make a career in anime background voicing or just streaming for fun, go ahead! All the applications suggested here are super-easy to use and even free.

Also read: