Mastering Sound Levels: Adjusting Volume on Audacity

Audacity is a free, open access, cross-platform sound editing and recording tool. It is compatible with Windows, Mac OS X, Linux, and various other operating systems. All of these aspects have contributed to Audacity’s worldwide popularity. Audacity features an amplified effect that alters the loudness of your chosen audio and other practical tools that can change the sound in different ways.

As a result, Audacity can not only assist you in modifying the level of an audio file, but it can also help you equalize, reduce, normalize, and so on.

Yes, you have heard it right, Audacity increase volume, but the primary question is how? But don’t worry, you will get the answer after reading the article. This article will explain how you can increase or decrease the volume of a whole and a specific segment of the audio file. Let’s get started.

In this article

01 How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

Blending the Tunes and Pictures: A Step-by-Step Guide to Audio Video Integration in Current Technology

How to Merge Video and Audio

Shanoon Cox

Mar 27, 2024• Proven solutions

Sometimes you want to merge an new audio track to the source video or overlap the original audio of the video. Then Wondershare Filmora might come in handy. This video editing application supports various video formats like MP4, FLV, AVI and MKV and has an ability to add/replace the audio in a video file without requiring any extra codec. You can even record your own voiceover and add it to the original video. This article introduces how to merge video and audio with this powerful tool.

To begin with, get a free trial of Wondershare Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1. Import the video and audio files

Wondershare Filmora has a simplistic and intuitive interface. You can either drag and drop files to the media library directly or click “Import” button to load as many audio or video files as you need. This video editing tool supports a vast range of formats, so you don’t need to worry about any loading problems.

2. Merge Video and Audio

After importing your videos to the media library, you can drag-n-drop the video and audio files to the video and audio track respectively. After that, you can align the video with the audio file on the timeline to merge them. Or if you want to replace the audio in the source video with the new audio file, you can right click the video on the track, select Detach Audio, and the original audio from the video will be detached out to the audio track. Then you can delete the detached audio from the track, add your new audio file to the audio track again, and finally align it with the video.

Tip: If the audio file needs further editing, just double click it on the audio track, and the audio editing panel will pop up. Then you can adjust the volume, set fade in/fade out, tune the pitch and denoise the audio as you like.

3. Export the file

After aligning the video with the audio on the timeline, hit “Export” to merge them together. You can save it as any file format you like. Besides that, you can also upload the merged video to YouTube directly, or burn to DVD.

So if you need an audio or video merger for your media files, give Wondershare Filmora a try and see what it does for you.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Sometimes you want to merge an new audio track to the source video or overlap the original audio of the video. Then Wondershare Filmora might come in handy. This video editing application supports various video formats like MP4, FLV, AVI and MKV and has an ability to add/replace the audio in a video file without requiring any extra codec. You can even record your own voiceover and add it to the original video. This article introduces how to merge video and audio with this powerful tool.

To begin with, get a free trial of Wondershare Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1. Import the video and audio files

Wondershare Filmora has a simplistic and intuitive interface. You can either drag and drop files to the media library directly or click “Import” button to load as many audio or video files as you need. This video editing tool supports a vast range of formats, so you don’t need to worry about any loading problems.

2. Merge Video and Audio

After importing your videos to the media library, you can drag-n-drop the video and audio files to the video and audio track respectively. After that, you can align the video with the audio file on the timeline to merge them. Or if you want to replace the audio in the source video with the new audio file, you can right click the video on the track, select Detach Audio, and the original audio from the video will be detached out to the audio track. Then you can delete the detached audio from the track, add your new audio file to the audio track again, and finally align it with the video.

Tip: If the audio file needs further editing, just double click it on the audio track, and the audio editing panel will pop up. Then you can adjust the volume, set fade in/fade out, tune the pitch and denoise the audio as you like.

3. Export the file

After aligning the video with the audio on the timeline, hit “Export” to merge them together. You can save it as any file format you like. Besides that, you can also upload the merged video to YouTube directly, or burn to DVD.

So if you need an audio or video merger for your media files, give Wondershare Filmora a try and see what it does for you.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Sometimes you want to merge an new audio track to the source video or overlap the original audio of the video. Then Wondershare Filmora might come in handy. This video editing application supports various video formats like MP4, FLV, AVI and MKV and has an ability to add/replace the audio in a video file without requiring any extra codec. You can even record your own voiceover and add it to the original video. This article introduces how to merge video and audio with this powerful tool.

To begin with, get a free trial of Wondershare Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1. Import the video and audio files

Wondershare Filmora has a simplistic and intuitive interface. You can either drag and drop files to the media library directly or click “Import” button to load as many audio or video files as you need. This video editing tool supports a vast range of formats, so you don’t need to worry about any loading problems.

2. Merge Video and Audio

After importing your videos to the media library, you can drag-n-drop the video and audio files to the video and audio track respectively. After that, you can align the video with the audio file on the timeline to merge them. Or if you want to replace the audio in the source video with the new audio file, you can right click the video on the track, select Detach Audio, and the original audio from the video will be detached out to the audio track. Then you can delete the detached audio from the track, add your new audio file to the audio track again, and finally align it with the video.

Tip: If the audio file needs further editing, just double click it on the audio track, and the audio editing panel will pop up. Then you can adjust the volume, set fade in/fade out, tune the pitch and denoise the audio as you like.

3. Export the file

After aligning the video with the audio on the timeline, hit “Export” to merge them together. You can save it as any file format you like. Besides that, you can also upload the merged video to YouTube directly, or burn to DVD.

So if you need an audio or video merger for your media files, give Wondershare Filmora a try and see what it does for you.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Sometimes you want to merge an new audio track to the source video or overlap the original audio of the video. Then Wondershare Filmora might come in handy. This video editing application supports various video formats like MP4, FLV, AVI and MKV and has an ability to add/replace the audio in a video file without requiring any extra codec. You can even record your own voiceover and add it to the original video. This article introduces how to merge video and audio with this powerful tool.

To begin with, get a free trial of Wondershare Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1. Import the video and audio files

Wondershare Filmora has a simplistic and intuitive interface. You can either drag and drop files to the media library directly or click “Import” button to load as many audio or video files as you need. This video editing tool supports a vast range of formats, so you don’t need to worry about any loading problems.

2. Merge Video and Audio

After importing your videos to the media library, you can drag-n-drop the video and audio files to the video and audio track respectively. After that, you can align the video with the audio file on the timeline to merge them. Or if you want to replace the audio in the source video with the new audio file, you can right click the video on the track, select Detach Audio, and the original audio from the video will be detached out to the audio track. Then you can delete the detached audio from the track, add your new audio file to the audio track again, and finally align it with the video.

Tip: If the audio file needs further editing, just double click it on the audio track, and the audio editing panel will pop up. Then you can adjust the volume, set fade in/fade out, tune the pitch and denoise the audio as you like.

3. Export the file

After aligning the video with the audio on the timeline, hit “Export” to merge them together. You can save it as any file format you like. Besides that, you can also upload the merged video to YouTube directly, or burn to DVD.

So if you need an audio or video merger for your media files, give Wondershare Filmora a try and see what it does for you.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Infusing Auditory Experience in Visual Storytelling

Whether you are making a casual video for sharing with friends or making something much more complex for uploading on social media, all videos are not complete without the right music. While you can easily find the right song and music, you may get confused when you want to put music behind video that you may want to upload on social media. Thus, we are here with a complete detailed guide on how to put music over a video. To help you in easily learning how to put music behind a video, we have given multiple methods down below. This includes methods that need a computer, methods to put music on video online, methods on how to put music on Kinemaster, and much more.

In this article

01 [How to Put Music Over a Video?](#Part 1)

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Also read: