Troubleshooting Sound Quality: Strategies for Easing Audio Deformation

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

“Detaching Sound Effects From Videos Using Adobe Premiere Pro – Step by Step”

Are you into the creative industry? Do you need to detach audio from a video? Are you a fan of Premiere Pro?

With the media industry progressing, advanced features are on the rise. Each upgrade is for the creator’s ease. The well-developed functions limit the stress at the workplace. Don’t you agree? The media production needs to detach audio from video. It is essential to censor audio out or eliminate unwanted background noise.

Most often, audio has to be detached for B-roll. One can detach audio Premiere Pro effortlessly. The article covers the procedure to extract and separate audio from a video. We shall also have a preview of Filmora. So, what are we waiting for? Let us commence this!

In this article

01 How Can You Extract, Separate, or Detach Audio from Video? [Premiere Pro]

02 Tips to Detach or Remove Audio From Video in Filmora

Part 1: How Can You Extract, Separate, or Detach Audio from Video? [Premiere Pro]

Premiere Pro detaches audio flawlessly. Adobe Premiere Pro is a video editing software. With creative tools, a flexible interface, and powerful capabilities, Premiere Pro turns your raw footage into something extraordinary. It enables you to perform color grading, color correction, and transitions effectively. The largest toolset has made life bearable for creators.

Additionally, Adobe Premiere Pro has an excellent range of collaboration tools. There are learning tools to guide the beginner towards a successful process. These tutorials have assisted the user in performing basic operations productively. The refined video editing tools have created a revolution in the market. The Auto Reframe feature changes the crop selection by keeping the attention where it is due.

Are you invested in detaching the audio process? Worry no more as we have got you. Premiere Pro doesn’t leave its users empty-handed. Audio extraction and separation both would be included in this section.

Audio Extraction Process

The audio extraction procedure is a great way to lubricate the editing process. The audio is extracted to add new audio master clips in this phenomenon. The channel mapping, duration, gain, speed, and footage adjustment are applied to the extracted clips. The original content remains preserved.

Before detaching audio, let us shift our focus to extracting it. So, are you with us? Follow the step-by-step below to extract audio from the video.

Step 1: Launching Premiere Pro

Open Adobe Premiere Pro. Press ‘New Project’ from the interface that appears. The default settings are good to go. However, make sure that the output location is appropriate. Hit ‘OK.’

Step 2: Importing the Clips

Now, click on ‘Media Browser’ from the middle panel. Import the targeted video clips to initiate the process. Select the videos whose audio has to be extracted. Head to the ‘Clip’ section and choose ‘Audio Options.’ Hit ‘Extract Audio’ afterward.

Step 3: File Extraction

In a couple of seconds, Premiere Pro creates duplicate audio files. The original video clips are not affected in any way. Moving on, let us move on to export the extracted audio clips.

Step 4: Exporting Process

Mark in and out points on your sequence for the session you wish to export. Mute the rest of the tracks. Now, navigate to the ‘File,’ press ‘Export,’ and then ‘Media.’ For encoding format, choose between MP3 and WAV form audio based on the original file format. Choose the output location. Hit ‘Export,’ and you are done.

Audio Detaching Process

Similarly, audio separation is another way to access a part of the audio. It permits you to use any audio section and make necessary edits to it. To detach audio in Premiere Pro, kindly follow the guidelines below.

Step 1: Importing the Media Files

Launch Premiere Pro from your computer. The interface opens up in seconds. The user is recommended to browse the targeted video with attached audio. Add it to the timeline of the Premiere Pro.

Step 2: Unlinking Process

After that, right-click on the clip. Choose ‘Unlink’ from the list of options that appear. The user can easily select and edit both the audio and video content. However, you can also separate audio using another faster process.

Step 3: Deleting Process

Hold down the ALT key from your keyboard and click on the audio clip to do this more effectively. Use the ‘Delete’ button and get rid of it once and for all. Now, make necessary edits, and you are done for the day!

Part 2: Tips to Detach or Remove Audio From Video in Filmora

Wondershare Filmora needs no introduction. Filmora has always had something refined to offer in a world full of video editors. Wouldn’t you agree? A content creator needs a video editing tool with an interactive interface with balanced functions.

Filmora knows different tricks to keep creative professionals invested in it. From keyframing to motion tracking and green screen to color matching, Wondershare Filmora wouldn’t disappoint you. The optimized GPU detection brings productivity to work. As far as audio editing is concerned, Filmora has advanced tools on the go.

The audio equalizer and audio mixer fine-tune the music and adjust the audio of separate tracks, respectively. You can split audio, adjust the audio volume, and perform audio ducking. The creative creators can also add a voiceover and trim the clips. The original audio of the video can also be replaced technically. Isn’t that the whole dream?

In short, Filmora has everything under one platform. There is no need to download extensive video editors for each functionality.

Moving on to the section, we shall discuss the procedure to detach or remove audio using this exceptional tool. So, let us try this!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Browsing the Video

Download Wondershare Filmora in your system. Launch it as soon as the process is concluded. Import the targeted video files into the program. Drag the video from the library onto the timeline.

Step 2: Removing Audio

To remove the audio, right-click on the video file from the timeline. Click on ‘Detach audio’ from the options that appear. The audio file is separated from the video file. It is displayed in another track below the video track.

Step 3: Final Process

Now, the user is free to make edits to the audio and perform modifications as deemed necessary. Delete the separated audio track if you wish to add a new voiceover or audio in the background. You can do so by clicking on the trash button above the timeline.

Conclusion

The raw videos undergo treatment to look ravishing. Don’t you think? Without the needed editing, these videos wouldn’t stand anywhere. After the original audio is detached, a better message is expressed to replace it with promising content.

The article introduced Premiere Pro. Moreover, how to detach audio from video Premiere Pro was also discussed in detail. If you want to extract audio from video, this write-up will help you. Wondershare Filmora is a video editing software with great tools to get the trick done in seconds.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 Tips to Detach or Remove Audio From Video in Filmora

Part 1: How Can You Extract, Separate, or Detach Audio from Video? [Premiere Pro]

Premiere Pro detaches audio flawlessly. Adobe Premiere Pro is a video editing software. With creative tools, a flexible interface, and powerful capabilities, Premiere Pro turns your raw footage into something extraordinary. It enables you to perform color grading, color correction, and transitions effectively. The largest toolset has made life bearable for creators.

Additionally, Adobe Premiere Pro has an excellent range of collaboration tools. There are learning tools to guide the beginner towards a successful process. These tutorials have assisted the user in performing basic operations productively. The refined video editing tools have created a revolution in the market. The Auto Reframe feature changes the crop selection by keeping the attention where it is due.

Are you invested in detaching the audio process? Worry no more as we have got you. Premiere Pro doesn’t leave its users empty-handed. Audio extraction and separation both would be included in this section.

Audio Extraction Process

The audio extraction procedure is a great way to lubricate the editing process. The audio is extracted to add new audio master clips in this phenomenon. The channel mapping, duration, gain, speed, and footage adjustment are applied to the extracted clips. The original content remains preserved.

Before detaching audio, let us shift our focus to extracting it. So, are you with us? Follow the step-by-step below to extract audio from the video.

Step 1: Launching Premiere Pro

Open Adobe Premiere Pro. Press ‘New Project’ from the interface that appears. The default settings are good to go. However, make sure that the output location is appropriate. Hit ‘OK.’

Step 2: Importing the Clips

Now, click on ‘Media Browser’ from the middle panel. Import the targeted video clips to initiate the process. Select the videos whose audio has to be extracted. Head to the ‘Clip’ section and choose ‘Audio Options.’ Hit ‘Extract Audio’ afterward.

Step 3: File Extraction

In a couple of seconds, Premiere Pro creates duplicate audio files. The original video clips are not affected in any way. Moving on, let us move on to export the extracted audio clips.

Step 4: Exporting Process

Mark in and out points on your sequence for the session you wish to export. Mute the rest of the tracks. Now, navigate to the ‘File,’ press ‘Export,’ and then ‘Media.’ For encoding format, choose between MP3 and WAV form audio based on the original file format. Choose the output location. Hit ‘Export,’ and you are done.

Audio Detaching Process

Similarly, audio separation is another way to access a part of the audio. It permits you to use any audio section and make necessary edits to it. To detach audio in Premiere Pro, kindly follow the guidelines below.

Step 1: Importing the Media Files

Launch Premiere Pro from your computer. The interface opens up in seconds. The user is recommended to browse the targeted video with attached audio. Add it to the timeline of the Premiere Pro.

Step 2: Unlinking Process

After that, right-click on the clip. Choose ‘Unlink’ from the list of options that appear. The user can easily select and edit both the audio and video content. However, you can also separate audio using another faster process.

Step 3: Deleting Process

Hold down the ALT key from your keyboard and click on the audio clip to do this more effectively. Use the ‘Delete’ button and get rid of it once and for all. Now, make necessary edits, and you are done for the day!

Part 2: Tips to Detach or Remove Audio From Video in Filmora

Wondershare Filmora needs no introduction. Filmora has always had something refined to offer in a world full of video editors. Wouldn’t you agree? A content creator needs a video editing tool with an interactive interface with balanced functions.

Filmora knows different tricks to keep creative professionals invested in it. From keyframing to motion tracking and green screen to color matching, Wondershare Filmora wouldn’t disappoint you. The optimized GPU detection brings productivity to work. As far as audio editing is concerned, Filmora has advanced tools on the go.

The audio equalizer and audio mixer fine-tune the music and adjust the audio of separate tracks, respectively. You can split audio, adjust the audio volume, and perform audio ducking. The creative creators can also add a voiceover and trim the clips. The original audio of the video can also be replaced technically. Isn’t that the whole dream?

In short, Filmora has everything under one platform. There is no need to download extensive video editors for each functionality.

Moving on to the section, we shall discuss the procedure to detach or remove audio using this exceptional tool. So, let us try this!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Browsing the Video

Download Wondershare Filmora in your system. Launch it as soon as the process is concluded. Import the targeted video files into the program. Drag the video from the library onto the timeline.

Step 2: Removing Audio

To remove the audio, right-click on the video file from the timeline. Click on ‘Detach audio’ from the options that appear. The audio file is separated from the video file. It is displayed in another track below the video track.

Step 3: Final Process

Now, the user is free to make edits to the audio and perform modifications as deemed necessary. Delete the separated audio track if you wish to add a new voiceover or audio in the background. You can do so by clicking on the trash button above the timeline.

Conclusion

The raw videos undergo treatment to look ravishing. Don’t you think? Without the needed editing, these videos wouldn’t stand anywhere. After the original audio is detached, a better message is expressed to replace it with promising content.

The article introduced Premiere Pro. Moreover, how to detach audio from video Premiere Pro was also discussed in detail. If you want to extract audio from video, this write-up will help you. Wondershare Filmora is a video editing software with great tools to get the trick done in seconds.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 Tips to Detach or Remove Audio From Video in Filmora

Part 1: How Can You Extract, Separate, or Detach Audio from Video? [Premiere Pro]

Premiere Pro detaches audio flawlessly. Adobe Premiere Pro is a video editing software. With creative tools, a flexible interface, and powerful capabilities, Premiere Pro turns your raw footage into something extraordinary. It enables you to perform color grading, color correction, and transitions effectively. The largest toolset has made life bearable for creators.

Additionally, Adobe Premiere Pro has an excellent range of collaboration tools. There are learning tools to guide the beginner towards a successful process. These tutorials have assisted the user in performing basic operations productively. The refined video editing tools have created a revolution in the market. The Auto Reframe feature changes the crop selection by keeping the attention where it is due.

Are you invested in detaching the audio process? Worry no more as we have got you. Premiere Pro doesn’t leave its users empty-handed. Audio extraction and separation both would be included in this section.

Audio Extraction Process

The audio extraction procedure is a great way to lubricate the editing process. The audio is extracted to add new audio master clips in this phenomenon. The channel mapping, duration, gain, speed, and footage adjustment are applied to the extracted clips. The original content remains preserved.

Before detaching audio, let us shift our focus to extracting it. So, are you with us? Follow the step-by-step below to extract audio from the video.

Step 1: Launching Premiere Pro

Open Adobe Premiere Pro. Press ‘New Project’ from the interface that appears. The default settings are good to go. However, make sure that the output location is appropriate. Hit ‘OK.’

Step 2: Importing the Clips

Now, click on ‘Media Browser’ from the middle panel. Import the targeted video clips to initiate the process. Select the videos whose audio has to be extracted. Head to the ‘Clip’ section and choose ‘Audio Options.’ Hit ‘Extract Audio’ afterward.

Step 3: File Extraction

In a couple of seconds, Premiere Pro creates duplicate audio files. The original video clips are not affected in any way. Moving on, let us move on to export the extracted audio clips.

Step 4: Exporting Process

Mark in and out points on your sequence for the session you wish to export. Mute the rest of the tracks. Now, navigate to the ‘File,’ press ‘Export,’ and then ‘Media.’ For encoding format, choose between MP3 and WAV form audio based on the original file format. Choose the output location. Hit ‘Export,’ and you are done.

Audio Detaching Process

Similarly, audio separation is another way to access a part of the audio. It permits you to use any audio section and make necessary edits to it. To detach audio in Premiere Pro, kindly follow the guidelines below.

Step 1: Importing the Media Files

Launch Premiere Pro from your computer. The interface opens up in seconds. The user is recommended to browse the targeted video with attached audio. Add it to the timeline of the Premiere Pro.

Step 2: Unlinking Process

After that, right-click on the clip. Choose ‘Unlink’ from the list of options that appear. The user can easily select and edit both the audio and video content. However, you can also separate audio using another faster process.

Step 3: Deleting Process

Hold down the ALT key from your keyboard and click on the audio clip to do this more effectively. Use the ‘Delete’ button and get rid of it once and for all. Now, make necessary edits, and you are done for the day!

Part 2: Tips to Detach or Remove Audio From Video in Filmora

Wondershare Filmora needs no introduction. Filmora has always had something refined to offer in a world full of video editors. Wouldn’t you agree? A content creator needs a video editing tool with an interactive interface with balanced functions.

Filmora knows different tricks to keep creative professionals invested in it. From keyframing to motion tracking and green screen to color matching, Wondershare Filmora wouldn’t disappoint you. The optimized GPU detection brings productivity to work. As far as audio editing is concerned, Filmora has advanced tools on the go.

The audio equalizer and audio mixer fine-tune the music and adjust the audio of separate tracks, respectively. You can split audio, adjust the audio volume, and perform audio ducking. The creative creators can also add a voiceover and trim the clips. The original audio of the video can also be replaced technically. Isn’t that the whole dream?

In short, Filmora has everything under one platform. There is no need to download extensive video editors for each functionality.

Moving on to the section, we shall discuss the procedure to detach or remove audio using this exceptional tool. So, let us try this!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Browsing the Video

Download Wondershare Filmora in your system. Launch it as soon as the process is concluded. Import the targeted video files into the program. Drag the video from the library onto the timeline.

Step 2: Removing Audio

To remove the audio, right-click on the video file from the timeline. Click on ‘Detach audio’ from the options that appear. The audio file is separated from the video file. It is displayed in another track below the video track.

Step 3: Final Process

Now, the user is free to make edits to the audio and perform modifications as deemed necessary. Delete the separated audio track if you wish to add a new voiceover or audio in the background. You can do so by clicking on the trash button above the timeline.

Conclusion

The raw videos undergo treatment to look ravishing. Don’t you think? Without the needed editing, these videos wouldn’t stand anywhere. After the original audio is detached, a better message is expressed to replace it with promising content.

The article introduced Premiere Pro. Moreover, how to detach audio from video Premiere Pro was also discussed in detail. If you want to extract audio from video, this write-up will help you. Wondershare Filmora is a video editing software with great tools to get the trick done in seconds.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 Tips to Detach or Remove Audio From Video in Filmora

Part 1: How Can You Extract, Separate, or Detach Audio from Video? [Premiere Pro]

Premiere Pro detaches audio flawlessly. Adobe Premiere Pro is a video editing software. With creative tools, a flexible interface, and powerful capabilities, Premiere Pro turns your raw footage into something extraordinary. It enables you to perform color grading, color correction, and transitions effectively. The largest toolset has made life bearable for creators.

Additionally, Adobe Premiere Pro has an excellent range of collaboration tools. There are learning tools to guide the beginner towards a successful process. These tutorials have assisted the user in performing basic operations productively. The refined video editing tools have created a revolution in the market. The Auto Reframe feature changes the crop selection by keeping the attention where it is due.

Are you invested in detaching the audio process? Worry no more as we have got you. Premiere Pro doesn’t leave its users empty-handed. Audio extraction and separation both would be included in this section.

Audio Extraction Process

The audio extraction procedure is a great way to lubricate the editing process. The audio is extracted to add new audio master clips in this phenomenon. The channel mapping, duration, gain, speed, and footage adjustment are applied to the extracted clips. The original content remains preserved.

Before detaching audio, let us shift our focus to extracting it. So, are you with us? Follow the step-by-step below to extract audio from the video.

Step 1: Launching Premiere Pro

Open Adobe Premiere Pro. Press ‘New Project’ from the interface that appears. The default settings are good to go. However, make sure that the output location is appropriate. Hit ‘OK.’

Step 2: Importing the Clips

Now, click on ‘Media Browser’ from the middle panel. Import the targeted video clips to initiate the process. Select the videos whose audio has to be extracted. Head to the ‘Clip’ section and choose ‘Audio Options.’ Hit ‘Extract Audio’ afterward.

Step 3: File Extraction

In a couple of seconds, Premiere Pro creates duplicate audio files. The original video clips are not affected in any way. Moving on, let us move on to export the extracted audio clips.

Step 4: Exporting Process

Mark in and out points on your sequence for the session you wish to export. Mute the rest of the tracks. Now, navigate to the ‘File,’ press ‘Export,’ and then ‘Media.’ For encoding format, choose between MP3 and WAV form audio based on the original file format. Choose the output location. Hit ‘Export,’ and you are done.

Audio Detaching Process

Similarly, audio separation is another way to access a part of the audio. It permits you to use any audio section and make necessary edits to it. To detach audio in Premiere Pro, kindly follow the guidelines below.

Step 1: Importing the Media Files

Launch Premiere Pro from your computer. The interface opens up in seconds. The user is recommended to browse the targeted video with attached audio. Add it to the timeline of the Premiere Pro.

Step 2: Unlinking Process

After that, right-click on the clip. Choose ‘Unlink’ from the list of options that appear. The user can easily select and edit both the audio and video content. However, you can also separate audio using another faster process.

Step 3: Deleting Process

Hold down the ALT key from your keyboard and click on the audio clip to do this more effectively. Use the ‘Delete’ button and get rid of it once and for all. Now, make necessary edits, and you are done for the day!

Part 2: Tips to Detach or Remove Audio From Video in Filmora

Wondershare Filmora needs no introduction. Filmora has always had something refined to offer in a world full of video editors. Wouldn’t you agree? A content creator needs a video editing tool with an interactive interface with balanced functions.

Filmora knows different tricks to keep creative professionals invested in it. From keyframing to motion tracking and green screen to color matching, Wondershare Filmora wouldn’t disappoint you. The optimized GPU detection brings productivity to work. As far as audio editing is concerned, Filmora has advanced tools on the go.

The audio equalizer and audio mixer fine-tune the music and adjust the audio of separate tracks, respectively. You can split audio, adjust the audio volume, and perform audio ducking. The creative creators can also add a voiceover and trim the clips. The original audio of the video can also be replaced technically. Isn’t that the whole dream?

In short, Filmora has everything under one platform. There is no need to download extensive video editors for each functionality.

Moving on to the section, we shall discuss the procedure to detach or remove audio using this exceptional tool. So, let us try this!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Browsing the Video

Download Wondershare Filmora in your system. Launch it as soon as the process is concluded. Import the targeted video files into the program. Drag the video from the library onto the timeline.

Step 2: Removing Audio

To remove the audio, right-click on the video file from the timeline. Click on ‘Detach audio’ from the options that appear. The audio file is separated from the video file. It is displayed in another track below the video track.

Step 3: Final Process

Now, the user is free to make edits to the audio and perform modifications as deemed necessary. Delete the separated audio track if you wish to add a new voiceover or audio in the background. You can do so by clicking on the trash button above the timeline.

Conclusion

The raw videos undergo treatment to look ravishing. Don’t you think? Without the needed editing, these videos wouldn’t stand anywhere. After the original audio is detached, a better message is expressed to replace it with promising content.

The article introduced Premiere Pro. Moreover, how to detach audio from video Premiere Pro was also discussed in detail. If you want to extract audio from video, this write-up will help you. Wondershare Filmora is a video editing software with great tools to get the trick done in seconds.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

“Seamless Song Editing on Mac: Unveiling the Most Acclaimed MP3 Cutter Applications”

MP3 Cutter for Mac - Which is the Best MP3 Cutter on Mac?

Benjamin Arango

Jan 23, 2024• Proven solutions

Whether you run a podcast or are a musician who wants to share audio files through Spotify, SoundCloud, YouTube, or any other platform or smartphone app, you need to cut and edit your MP3 files before the final product is ready. Having access to a reliable and feature-rich MP3 cutter for Mac enables you to edit the audio file in a manner that helps you in delivering the exceptional listening experience your audience expects.

This is why it is important to pick your MP3 cutter for Mac wisely while taking into consideration a wide range of factors. Some of the top factors include reliability, performance, cost, and ease of use. If you are just a beginner in this space or don’t want access to highly advanced editing features that professionals use, you can do a great job with the following MP3 cutters that are available on Mac.

Mac MP3 Cutter: 1. Wondershare Filmora - Top Pick

It is feature-rich audio as well as a video editor that allows beginners to edit their audio and video files quickly and easily. It has been specially designed for audio editing amateurs with a simple and user-friendly layout that ensures there is an easy learning curve. With the help of Filmora, you can record your music and voice using a built-in feature and also use it to trim, merge, split, and cut your MP3 files.

Apart from that, you can also make necessary adjustments to volume, pitch, and speed ensuring that your audio has the clarity you need. You can use Filmora for personal use as well to create customized ringtones by cutting songs and add special sound effects to your presentation.

Pros:

1. Cut, merge, split, and edit MP3 files
2. Adjust tempo, speed, pitch, and volume of your audio
3. Add special effects including detaching MP3 audio, fade in and out
4. Wide support for popular audio formats including MP3, AC3, APE, AU, FLAC, M4A, MP2, OGG, WAV, WMA, and more
5. Ability to edit multi-audio tracks and add background music or voiceovers
6. Zero loss of quality with fast editing

Cons:

• May does not have the professional-grade MP3 cutting features

MP3 Cutter 2. MixPad for Mac

Although it has an archaic user interface, MixPad offers a wide range of features including multi-track editing. You can merge multiple MP3 files to create a new file along with splitting them into separate MP3 files. All you need to do is tap a few buttons and you are good to go. Apart from that, you can also record and edit your own music and another type of audio as well. Editing features include joining, recording, trimming, and merging audio files.

While the user interface is a bit daunting to look at, it is quite easy to use and provides all the basic editing features you are looking for. A good option for beginners who don’t want to spend a lot of money on professional software.

Pros

1. Easy to learn user-friendly interface
2. Includes all the basic editing functions including trimming, merging, and splitting
3. Capability to record your own audio and music

Cons

1. An old fashioned interface that doesn’t look as modern
2. Only basic functionality is available
3. Not as feature-rich as Filmora or professional-grade MP3 cutters

MP3 Cutter 3. TunesKit MP3 Cutter

If you are searching for affordable options, you can also consider TunesKit MP3 Cutter for Mac which is an all-around media editor. You can trim, merge, and edit your audio as well as video files without losing any quality. It also supports a wide range of formats including WMV, OGG, MP4, and 3GP.

The software offers a free version which you can try before you pay for the premium version. This will allow you to identify whether the software meets your MP3 cutting requirements fully or not.

Pros

1. Support for a wide range of formats like MP3, AC3, OGG, APE, and more
2. Easy to use software with a free trial
3. Access to basic MP3 cutting options including trim, merge, and edit
4. Outputs lossless audio quality for a premium listening experience

Cons

1. No support for advanced formats like FLAC
2. The user interface isn’t as modern and maybe too simple
3. Not as feature-rich as Filmora when it comes to MP3 cutting

MP3 Cutter 4. WavePad

This is another MP3 cutting software for both beginners and professionals that is compatible with multiple formats. It offers a wide range of audio editing effects, batch processing, and access to basic editing tools like copying and pasting, cutting, amplification, noise reduction, echo, and more.

The software is well-designed and easy to learn for all types of users including beginners.

Pros

1. Support for a wide range of formats including FLAC, VOX, OGG, WMA, AU, MP3, WAV, and AU
2. Modern user-interface that is easy to learn
3. Many MP3 editing features including trimming, copying, pasting, echo, amplification, and more
4. Support for batch processing and a number of editing effects

Cons

1. Audio restoration rendering is comparatively slow
2. It May not have all the professional features you’re looking for

MP3 Cutter 5. Macsome Audio Splitter

Specially designed for macOS users, it is one of the easiest to use free MP3 cutters. You can use it to cut and edit MP3 and ACC files while audio processing remains lossless. It allows you to import multiple files and you can split them one by one depending on what result you are looking for. It also offers the options of ID tags.

Pros

1. Free to use for macOS users
2. Supports basic file formats
3. Very easy to use
4. Convert multiple files at once

Cons

1. Very limited in terms of MP3 editing features
2. Processes files on a one-by-one basis
3. Supports only two formats MP3 and ACC
4. Only suitable for casual MP3 editors

Final Word

While the above mentioned MP3 cutters for Mac are strong in their own right, Wondershare’s Filmora X delivers the best balance of price, performance, reliability, and ease of use. If you are a beginner or an intermediate who is looking to edit or cut MP3 files on Mac without any hassles, Filmora X is one of your best bets.

learn more: How to Easily Cut Large Videos Faster on Mac>>>

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Jan 23, 2024• Proven solutions

Whether you run a podcast or are a musician who wants to share audio files through Spotify, SoundCloud, YouTube, or any other platform or smartphone app, you need to cut and edit your MP3 files before the final product is ready. Having access to a reliable and feature-rich MP3 cutter for Mac enables you to edit the audio file in a manner that helps you in delivering the exceptional listening experience your audience expects.

This is why it is important to pick your MP3 cutter for Mac wisely while taking into consideration a wide range of factors. Some of the top factors include reliability, performance, cost, and ease of use. If you are just a beginner in this space or don’t want access to highly advanced editing features that professionals use, you can do a great job with the following MP3 cutters that are available on Mac.

Mac MP3 Cutter: 1. Wondershare Filmora - Top Pick

It is feature-rich audio as well as a video editor that allows beginners to edit their audio and video files quickly and easily. It has been specially designed for audio editing amateurs with a simple and user-friendly layout that ensures there is an easy learning curve. With the help of Filmora, you can record your music and voice using a built-in feature and also use it to trim, merge, split, and cut your MP3 files.

Apart from that, you can also make necessary adjustments to volume, pitch, and speed ensuring that your audio has the clarity you need. You can use Filmora for personal use as well to create customized ringtones by cutting songs and add special sound effects to your presentation.

Pros:

1. Cut, merge, split, and edit MP3 files
2. Adjust tempo, speed, pitch, and volume of your audio
3. Add special effects including detaching MP3 audio, fade in and out
4. Wide support for popular audio formats including MP3, AC3, APE, AU, FLAC, M4A, MP2, OGG, WAV, WMA, and more
5. Ability to edit multi-audio tracks and add background music or voiceovers
6. Zero loss of quality with fast editing

Cons:

• May does not have the professional-grade MP3 cutting features

MP3 Cutter 2. MixPad for Mac

Although it has an archaic user interface, MixPad offers a wide range of features including multi-track editing. You can merge multiple MP3 files to create a new file along with splitting them into separate MP3 files. All you need to do is tap a few buttons and you are good to go. Apart from that, you can also record and edit your own music and another type of audio as well. Editing features include joining, recording, trimming, and merging audio files.

While the user interface is a bit daunting to look at, it is quite easy to use and provides all the basic editing features you are looking for. A good option for beginners who don’t want to spend a lot of money on professional software.

Pros

1. Easy to learn user-friendly interface
2. Includes all the basic editing functions including trimming, merging, and splitting
3. Capability to record your own audio and music

Cons

1. An old fashioned interface that doesn’t look as modern
2. Only basic functionality is available
3. Not as feature-rich as Filmora or professional-grade MP3 cutters

MP3 Cutter 3. TunesKit MP3 Cutter

If you are searching for affordable options, you can also consider TunesKit MP3 Cutter for Mac which is an all-around media editor. You can trim, merge, and edit your audio as well as video files without losing any quality. It also supports a wide range of formats including WMV, OGG, MP4, and 3GP.

The software offers a free version which you can try before you pay for the premium version. This will allow you to identify whether the software meets your MP3 cutting requirements fully or not.

Pros

1. Support for a wide range of formats like MP3, AC3, OGG, APE, and more
2. Easy to use software with a free trial
3. Access to basic MP3 cutting options including trim, merge, and edit
4. Outputs lossless audio quality for a premium listening experience

Cons

1. No support for advanced formats like FLAC
2. The user interface isn’t as modern and maybe too simple
3. Not as feature-rich as Filmora when it comes to MP3 cutting

MP3 Cutter 4. WavePad

This is another MP3 cutting software for both beginners and professionals that is compatible with multiple formats. It offers a wide range of audio editing effects, batch processing, and access to basic editing tools like copying and pasting, cutting, amplification, noise reduction, echo, and more.

The software is well-designed and easy to learn for all types of users including beginners.

Pros

1. Support for a wide range of formats including FLAC, VOX, OGG, WMA, AU, MP3, WAV, and AU
2. Modern user-interface that is easy to learn
3. Many MP3 editing features including trimming, copying, pasting, echo, amplification, and more
4. Support for batch processing and a number of editing effects

Cons

1. Audio restoration rendering is comparatively slow
2. It May not have all the professional features you’re looking for

MP3 Cutter 5. Macsome Audio Splitter

Specially designed for macOS users, it is one of the easiest to use free MP3 cutters. You can use it to cut and edit MP3 and ACC files while audio processing remains lossless. It allows you to import multiple files and you can split them one by one depending on what result you are looking for. It also offers the options of ID tags.

Pros

1. Free to use for macOS users
2. Supports basic file formats
3. Very easy to use
4. Convert multiple files at once

Cons

1. Very limited in terms of MP3 editing features
2. Processes files on a one-by-one basis
3. Supports only two formats MP3 and ACC
4. Only suitable for casual MP3 editors

Final Word

While the above mentioned MP3 cutters for Mac are strong in their own right, Wondershare’s Filmora X delivers the best balance of price, performance, reliability, and ease of use. If you are a beginner or an intermediate who is looking to edit or cut MP3 files on Mac without any hassles, Filmora X is one of your best bets.

learn more: How to Easily Cut Large Videos Faster on Mac>>>

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Jan 23, 2024• Proven solutions

Whether you run a podcast or are a musician who wants to share audio files through Spotify, SoundCloud, YouTube, or any other platform or smartphone app, you need to cut and edit your MP3 files before the final product is ready. Having access to a reliable and feature-rich MP3 cutter for Mac enables you to edit the audio file in a manner that helps you in delivering the exceptional listening experience your audience expects.

This is why it is important to pick your MP3 cutter for Mac wisely while taking into consideration a wide range of factors. Some of the top factors include reliability, performance, cost, and ease of use. If you are just a beginner in this space or don’t want access to highly advanced editing features that professionals use, you can do a great job with the following MP3 cutters that are available on Mac.

Mac MP3 Cutter: 1. Wondershare Filmora - Top Pick

It is feature-rich audio as well as a video editor that allows beginners to edit their audio and video files quickly and easily. It has been specially designed for audio editing amateurs with a simple and user-friendly layout that ensures there is an easy learning curve. With the help of Filmora, you can record your music and voice using a built-in feature and also use it to trim, merge, split, and cut your MP3 files.

Apart from that, you can also make necessary adjustments to volume, pitch, and speed ensuring that your audio has the clarity you need. You can use Filmora for personal use as well to create customized ringtones by cutting songs and add special sound effects to your presentation.

Pros:

1. Cut, merge, split, and edit MP3 files
2. Adjust tempo, speed, pitch, and volume of your audio
3. Add special effects including detaching MP3 audio, fade in and out
4. Wide support for popular audio formats including MP3, AC3, APE, AU, FLAC, M4A, MP2, OGG, WAV, WMA, and more
5. Ability to edit multi-audio tracks and add background music or voiceovers
6. Zero loss of quality with fast editing

Cons:

• May does not have the professional-grade MP3 cutting features

MP3 Cutter 2. MixPad for Mac

Although it has an archaic user interface, MixPad offers a wide range of features including multi-track editing. You can merge multiple MP3 files to create a new file along with splitting them into separate MP3 files. All you need to do is tap a few buttons and you are good to go. Apart from that, you can also record and edit your own music and another type of audio as well. Editing features include joining, recording, trimming, and merging audio files.

While the user interface is a bit daunting to look at, it is quite easy to use and provides all the basic editing features you are looking for. A good option for beginners who don’t want to spend a lot of money on professional software.

Pros

1. Easy to learn user-friendly interface
2. Includes all the basic editing functions including trimming, merging, and splitting
3. Capability to record your own audio and music

Cons

1. An old fashioned interface that doesn’t look as modern
2. Only basic functionality is available
3. Not as feature-rich as Filmora or professional-grade MP3 cutters

MP3 Cutter 3. TunesKit MP3 Cutter

If you are searching for affordable options, you can also consider TunesKit MP3 Cutter for Mac which is an all-around media editor. You can trim, merge, and edit your audio as well as video files without losing any quality. It also supports a wide range of formats including WMV, OGG, MP4, and 3GP.

The software offers a free version which you can try before you pay for the premium version. This will allow you to identify whether the software meets your MP3 cutting requirements fully or not.

Pros

1. Support for a wide range of formats like MP3, AC3, OGG, APE, and more
2. Easy to use software with a free trial
3. Access to basic MP3 cutting options including trim, merge, and edit
4. Outputs lossless audio quality for a premium listening experience

Cons

1. No support for advanced formats like FLAC
2. The user interface isn’t as modern and maybe too simple
3. Not as feature-rich as Filmora when it comes to MP3 cutting

MP3 Cutter 4. WavePad

This is another MP3 cutting software for both beginners and professionals that is compatible with multiple formats. It offers a wide range of audio editing effects, batch processing, and access to basic editing tools like copying and pasting, cutting, amplification, noise reduction, echo, and more.

The software is well-designed and easy to learn for all types of users including beginners.

Pros

1. Support for a wide range of formats including FLAC, VOX, OGG, WMA, AU, MP3, WAV, and AU
2. Modern user-interface that is easy to learn
3. Many MP3 editing features including trimming, copying, pasting, echo, amplification, and more
4. Support for batch processing and a number of editing effects

Cons

1. Audio restoration rendering is comparatively slow
2. It May not have all the professional features you’re looking for

MP3 Cutter 5. Macsome Audio Splitter

Specially designed for macOS users, it is one of the easiest to use free MP3 cutters. You can use it to cut and edit MP3 and ACC files while audio processing remains lossless. It allows you to import multiple files and you can split them one by one depending on what result you are looking for. It also offers the options of ID tags.

Pros

1. Free to use for macOS users
2. Supports basic file formats
3. Very easy to use
4. Convert multiple files at once

Cons

1. Very limited in terms of MP3 editing features
2. Processes files on a one-by-one basis
3. Supports only two formats MP3 and ACC
4. Only suitable for casual MP3 editors

Final Word

While the above mentioned MP3 cutters for Mac are strong in their own right, Wondershare’s Filmora X delivers the best balance of price, performance, reliability, and ease of use. If you are a beginner or an intermediate who is looking to edit or cut MP3 files on Mac without any hassles, Filmora X is one of your best bets.

learn more: How to Easily Cut Large Videos Faster on Mac>>>

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Jan 23, 2024• Proven solutions

Whether you run a podcast or are a musician who wants to share audio files through Spotify, SoundCloud, YouTube, or any other platform or smartphone app, you need to cut and edit your MP3 files before the final product is ready. Having access to a reliable and feature-rich MP3 cutter for Mac enables you to edit the audio file in a manner that helps you in delivering the exceptional listening experience your audience expects.

This is why it is important to pick your MP3 cutter for Mac wisely while taking into consideration a wide range of factors. Some of the top factors include reliability, performance, cost, and ease of use. If you are just a beginner in this space or don’t want access to highly advanced editing features that professionals use, you can do a great job with the following MP3 cutters that are available on Mac.

Mac MP3 Cutter: 1. Wondershare Filmora - Top Pick

It is feature-rich audio as well as a video editor that allows beginners to edit their audio and video files quickly and easily. It has been specially designed for audio editing amateurs with a simple and user-friendly layout that ensures there is an easy learning curve. With the help of Filmora, you can record your music and voice using a built-in feature and also use it to trim, merge, split, and cut your MP3 files.

Apart from that, you can also make necessary adjustments to volume, pitch, and speed ensuring that your audio has the clarity you need. You can use Filmora for personal use as well to create customized ringtones by cutting songs and add special sound effects to your presentation.

Pros:

1. Cut, merge, split, and edit MP3 files
2. Adjust tempo, speed, pitch, and volume of your audio
3. Add special effects including detaching MP3 audio, fade in and out
4. Wide support for popular audio formats including MP3, AC3, APE, AU, FLAC, M4A, MP2, OGG, WAV, WMA, and more
5. Ability to edit multi-audio tracks and add background music or voiceovers
6. Zero loss of quality with fast editing

Cons:

• May does not have the professional-grade MP3 cutting features

MP3 Cutter 2. MixPad for Mac

Although it has an archaic user interface, MixPad offers a wide range of features including multi-track editing. You can merge multiple MP3 files to create a new file along with splitting them into separate MP3 files. All you need to do is tap a few buttons and you are good to go. Apart from that, you can also record and edit your own music and another type of audio as well. Editing features include joining, recording, trimming, and merging audio files.

While the user interface is a bit daunting to look at, it is quite easy to use and provides all the basic editing features you are looking for. A good option for beginners who don’t want to spend a lot of money on professional software.

Pros

1. Easy to learn user-friendly interface
2. Includes all the basic editing functions including trimming, merging, and splitting
3. Capability to record your own audio and music

Cons

1. An old fashioned interface that doesn’t look as modern
2. Only basic functionality is available
3. Not as feature-rich as Filmora or professional-grade MP3 cutters

MP3 Cutter 3. TunesKit MP3 Cutter

If you are searching for affordable options, you can also consider TunesKit MP3 Cutter for Mac which is an all-around media editor. You can trim, merge, and edit your audio as well as video files without losing any quality. It also supports a wide range of formats including WMV, OGG, MP4, and 3GP.

The software offers a free version which you can try before you pay for the premium version. This will allow you to identify whether the software meets your MP3 cutting requirements fully or not.

Pros

1. Support for a wide range of formats like MP3, AC3, OGG, APE, and more
2. Easy to use software with a free trial
3. Access to basic MP3 cutting options including trim, merge, and edit
4. Outputs lossless audio quality for a premium listening experience

Cons

1. No support for advanced formats like FLAC
2. The user interface isn’t as modern and maybe too simple
3. Not as feature-rich as Filmora when it comes to MP3 cutting

MP3 Cutter 4. WavePad

This is another MP3 cutting software for both beginners and professionals that is compatible with multiple formats. It offers a wide range of audio editing effects, batch processing, and access to basic editing tools like copying and pasting, cutting, amplification, noise reduction, echo, and more.

The software is well-designed and easy to learn for all types of users including beginners.

Pros

1. Support for a wide range of formats including FLAC, VOX, OGG, WMA, AU, MP3, WAV, and AU
2. Modern user-interface that is easy to learn
3. Many MP3 editing features including trimming, copying, pasting, echo, amplification, and more
4. Support for batch processing and a number of editing effects

Cons

1. Audio restoration rendering is comparatively slow
2. It May not have all the professional features you’re looking for

MP3 Cutter 5. Macsome Audio Splitter

Specially designed for macOS users, it is one of the easiest to use free MP3 cutters. You can use it to cut and edit MP3 and ACC files while audio processing remains lossless. It allows you to import multiple files and you can split them one by one depending on what result you are looking for. It also offers the options of ID tags.

Pros

1. Free to use for macOS users
2. Supports basic file formats
3. Very easy to use
4. Convert multiple files at once

Cons

1. Very limited in terms of MP3 editing features
2. Processes files on a one-by-one basis
3. Supports only two formats MP3 and ACC
4. Only suitable for casual MP3 editors

Final Word

While the above mentioned MP3 cutters for Mac are strong in their own right, Wondershare’s Filmora X delivers the best balance of price, performance, reliability, and ease of use. If you are a beginner or an intermediate who is looking to edit or cut MP3 files on Mac without any hassles, Filmora X is one of your best bets.

learn more: How to Easily Cut Large Videos Faster on Mac>>>

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: