In 2024, Transformative Soundscape Design Proven Strategies for Smooth Volume Fading and Elevating with Adobe After Effects
Transformative Soundscape Design: Proven Strategies for Smooth Volume Fading and Elevating with Adobe After Effects
How to Fade In and Fade Out Audio in Adobe After Effects
Benjamin Arango
Mar 27, 2024• Proven solutions
Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.
However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.
Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>
Adding the Fade In and Fade Out Effects to Audio Files in AE
Step 1: Check audio waveform in After Effects
Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.
Step 2: Add a keyframe to the audio file
The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .
You may also like: 15 Free After Effects Templates to Power up Your Video
Step 3: Complete Fade out/in audio in After Effects
Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.
Tips For Making Better Fade In and Fade Out Effects
The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.
1. Avoid Hard Cuts
A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.
You may also like: How to Cut Video in After Effects
2. Be Mindful of Audio Compression
Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.
3. Use the Fade In and Fade Out Effects Creatively
Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.
Conclusion
Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.
If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.
However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.
Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>
Adding the Fade In and Fade Out Effects to Audio Files in AE
Step 1: Check audio waveform in After Effects
Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.
Step 2: Add a keyframe to the audio file
The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .
You may also like: 15 Free After Effects Templates to Power up Your Video
Step 3: Complete Fade out/in audio in After Effects
Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.
Tips For Making Better Fade In and Fade Out Effects
The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.
1. Avoid Hard Cuts
A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.
You may also like: How to Cut Video in After Effects
2. Be Mindful of Audio Compression
Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.
3. Use the Fade In and Fade Out Effects Creatively
Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.
Conclusion
Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.
If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.
However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.
Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>
Adding the Fade In and Fade Out Effects to Audio Files in AE
Step 1: Check audio waveform in After Effects
Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.
Step 2: Add a keyframe to the audio file
The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .
You may also like: 15 Free After Effects Templates to Power up Your Video
Step 3: Complete Fade out/in audio in After Effects
Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.
Tips For Making Better Fade In and Fade Out Effects
The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.
1. Avoid Hard Cuts
A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.
You may also like: How to Cut Video in After Effects
2. Be Mindful of Audio Compression
Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.
3. Use the Fade In and Fade Out Effects Creatively
Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.
Conclusion
Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.
If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.
However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.
Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>
Adding the Fade In and Fade Out Effects to Audio Files in AE
Step 1: Check audio waveform in After Effects
Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.
Step 2: Add a keyframe to the audio file
The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .
You may also like: 15 Free After Effects Templates to Power up Your Video
Step 3: Complete Fade out/in audio in After Effects
Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.
Tips For Making Better Fade In and Fade Out Effects
The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.
1. Avoid Hard Cuts
A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.
You may also like: How to Cut Video in After Effects
2. Be Mindful of Audio Compression
Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.
3. Use the Fade In and Fade Out Effects Creatively
Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.
Conclusion
Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.
If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Enhancing Cinematic Soundscape: Fading and Amplifying Audio Effectively with Keyframing in macOS Filmora
How to Fade In/Out Audio with Keyframes in Filmora for Mac
Benjamin Arango
Aug 18, 2022• Proven solutions
Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.
If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.
Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?
Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.
Step 1: Launch to Add Media Files
Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.
You can also execute “File > Import Media > Import media files” to bring the files into the timeline.
Step 2: Edit Audio
Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.
Increase or decrease the volume level based on which the clips should play.
Step 3: Adjust Volume and Add Keyframe
Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.
Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.
To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.
Part 2: How to Modify Audio Keyframes in Filmora for Mac?
Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.
Step 1: Modify Audio Keyframe
The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.
Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.
Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.
Step 2: Change Soundwaves
Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.
Step 3: Remove Background Noise
To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.
Step 4: Edit the Volume
If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.
It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.
Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?
Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.
Method 1
Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.
Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.
Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.
Method 2
- You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
- Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.
Conclusion
No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Aug 18, 2022• Proven solutions
Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.
If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.
Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?
Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.
Step 1: Launch to Add Media Files
Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.
You can also execute “File > Import Media > Import media files” to bring the files into the timeline.
Step 2: Edit Audio
Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.
Increase or decrease the volume level based on which the clips should play.
Step 3: Adjust Volume and Add Keyframe
Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.
Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.
To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.
Part 2: How to Modify Audio Keyframes in Filmora for Mac?
Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.
Step 1: Modify Audio Keyframe
The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.
Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.
Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.
Step 2: Change Soundwaves
Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.
Step 3: Remove Background Noise
To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.
Step 4: Edit the Volume
If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.
It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.
Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?
Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.
Method 1
Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.
Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.
Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.
Method 2
- You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
- Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.
Conclusion
No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Aug 18, 2022• Proven solutions
Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.
If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.
Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?
Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.
Step 1: Launch to Add Media Files
Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.
You can also execute “File > Import Media > Import media files” to bring the files into the timeline.
Step 2: Edit Audio
Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.
Increase or decrease the volume level based on which the clips should play.
Step 3: Adjust Volume and Add Keyframe
Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.
Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.
To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.
Part 2: How to Modify Audio Keyframes in Filmora for Mac?
Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.
Step 1: Modify Audio Keyframe
The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.
Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.
Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.
Step 2: Change Soundwaves
Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.
Step 3: Remove Background Noise
To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.
Step 4: Edit the Volume
If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.
It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.
Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?
Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.
Method 1
Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.
Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.
Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.
Method 2
- You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
- Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.
Conclusion
No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Aug 18, 2022• Proven solutions
Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.
If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.
Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?
Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.
Step 1: Launch to Add Media Files
Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.
You can also execute “File > Import Media > Import media files” to bring the files into the timeline.
Step 2: Edit Audio
Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.
Increase or decrease the volume level based on which the clips should play.
Step 3: Adjust Volume and Add Keyframe
Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.
Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.
To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.
Part 2: How to Modify Audio Keyframes in Filmora for Mac?
Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.
Step 1: Modify Audio Keyframe
The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.
Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.
Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.
Step 2: Change Soundwaves
Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.
Step 3: Remove Background Noise
To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.
Step 4: Edit the Volume
If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.
It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.
Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?
Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.
Method 1
Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.
Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.
Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.
Method 2
- You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
- Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.
Conclusion
No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Advanced Methods for Reducing Storage Space Needed for Media Files
How to Lower Volume of the Media Files
Liza Brown
Mar 27, 2024• Proven solutions
Sometimes the audio of the media files is too loud no matter how much you lower the volume on your speakers. Sometimes it’s because the video source itself was too quiet, or it was encoded at a loud volume. Although these media files come in many different formats, the method for lower the volume is relatively simple and universal. Using a video editing program like Wondershare Filmora (originally Wondershare Video Editor) , you will simply take advantage of the audio editor within the program to lower the volume. Here is a step-by-step guide to tell you how to lower volume in the media files.
Try this free software to lower the volume in the media files
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Lower Volume of the Media Files Step by Step Guide
1 Add media files you want to lower volume
After downloading and running this program, click “Import” to begin importing the files. This process many take several seconds depending on the size of the media file. Then the file will appear in the “User’s Album” of program. Drag the imported file to the Timeline.
2 Lower volume of the media files
Double click the target file and the “Editing” Window will appear. Then switch to the “Audio” column, reduce volume by dragging the volume level slider left. Don’t worry if you don’t get the sound right the first time. You can reset the volume by clicking the “Reset” button. After adjusting the volume, click the play icon to listen to the effect.
Tip: There are more functions in this column, such as Fade in/fade out, fine tune the pitch, etc. If you want to add more effects, go to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.
3 Save the files
Then hit the “Create” icon to save the edited files. You can save your files to different formats such as WMV, MOV, AVI, MKV, MP4 or save to play on different devices such as iPhone, iPad, PSP and Zune. To do this, switch to the related tab, enter the preset settings and press “Create” to begin the export. The exported file should have the same video, but with louder audio. You can also burn the files to DVD or directly upload to YouTube if you choose.
See, it’s so easy to lower the volume of the media files. Besides this function, this powerful video editing tool also supports trimming, cropping, adding video effects and loads more. Now just download it and explore more features of it!
Here is a video tutorial for you:
About Filmora video editor:
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
Sometimes the audio of the media files is too loud no matter how much you lower the volume on your speakers. Sometimes it’s because the video source itself was too quiet, or it was encoded at a loud volume. Although these media files come in many different formats, the method for lower the volume is relatively simple and universal. Using a video editing program like Wondershare Filmora (originally Wondershare Video Editor) , you will simply take advantage of the audio editor within the program to lower the volume. Here is a step-by-step guide to tell you how to lower volume in the media files.
Try this free software to lower the volume in the media files
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Lower Volume of the Media Files Step by Step Guide
1 Add media files you want to lower volume
After downloading and running this program, click “Import” to begin importing the files. This process many take several seconds depending on the size of the media file. Then the file will appear in the “User’s Album” of program. Drag the imported file to the Timeline.
2 Lower volume of the media files
Double click the target file and the “Editing” Window will appear. Then switch to the “Audio” column, reduce volume by dragging the volume level slider left. Don’t worry if you don’t get the sound right the first time. You can reset the volume by clicking the “Reset” button. After adjusting the volume, click the play icon to listen to the effect.
Tip: There are more functions in this column, such as Fade in/fade out, fine tune the pitch, etc. If you want to add more effects, go to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.
3 Save the files
Then hit the “Create” icon to save the edited files. You can save your files to different formats such as WMV, MOV, AVI, MKV, MP4 or save to play on different devices such as iPhone, iPad, PSP and Zune. To do this, switch to the related tab, enter the preset settings and press “Create” to begin the export. The exported file should have the same video, but with louder audio. You can also burn the files to DVD or directly upload to YouTube if you choose.
See, it’s so easy to lower the volume of the media files. Besides this function, this powerful video editing tool also supports trimming, cropping, adding video effects and loads more. Now just download it and explore more features of it!
Here is a video tutorial for you:
About Filmora video editor:
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
Sometimes the audio of the media files is too loud no matter how much you lower the volume on your speakers. Sometimes it’s because the video source itself was too quiet, or it was encoded at a loud volume. Although these media files come in many different formats, the method for lower the volume is relatively simple and universal. Using a video editing program like Wondershare Filmora (originally Wondershare Video Editor) , you will simply take advantage of the audio editor within the program to lower the volume. Here is a step-by-step guide to tell you how to lower volume in the media files.
Try this free software to lower the volume in the media files
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Lower Volume of the Media Files Step by Step Guide
1 Add media files you want to lower volume
After downloading and running this program, click “Import” to begin importing the files. This process many take several seconds depending on the size of the media file. Then the file will appear in the “User’s Album” of program. Drag the imported file to the Timeline.
2 Lower volume of the media files
Double click the target file and the “Editing” Window will appear. Then switch to the “Audio” column, reduce volume by dragging the volume level slider left. Don’t worry if you don’t get the sound right the first time. You can reset the volume by clicking the “Reset” button. After adjusting the volume, click the play icon to listen to the effect.
Tip: There are more functions in this column, such as Fade in/fade out, fine tune the pitch, etc. If you want to add more effects, go to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.
3 Save the files
Then hit the “Create” icon to save the edited files. You can save your files to different formats such as WMV, MOV, AVI, MKV, MP4 or save to play on different devices such as iPhone, iPad, PSP and Zune. To do this, switch to the related tab, enter the preset settings and press “Create” to begin the export. The exported file should have the same video, but with louder audio. You can also burn the files to DVD or directly upload to YouTube if you choose.
See, it’s so easy to lower the volume of the media files. Besides this function, this powerful video editing tool also supports trimming, cropping, adding video effects and loads more. Now just download it and explore more features of it!
Here is a video tutorial for you:
About Filmora video editor:
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Liza Brown
Mar 27, 2024• Proven solutions
Sometimes the audio of the media files is too loud no matter how much you lower the volume on your speakers. Sometimes it’s because the video source itself was too quiet, or it was encoded at a loud volume. Although these media files come in many different formats, the method for lower the volume is relatively simple and universal. Using a video editing program like Wondershare Filmora (originally Wondershare Video Editor) , you will simply take advantage of the audio editor within the program to lower the volume. Here is a step-by-step guide to tell you how to lower volume in the media files.
Try this free software to lower the volume in the media files
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Lower Volume of the Media Files Step by Step Guide
1 Add media files you want to lower volume
After downloading and running this program, click “Import” to begin importing the files. This process many take several seconds depending on the size of the media file. Then the file will appear in the “User’s Album” of program. Drag the imported file to the Timeline.
2 Lower volume of the media files
Double click the target file and the “Editing” Window will appear. Then switch to the “Audio” column, reduce volume by dragging the volume level slider left. Don’t worry if you don’t get the sound right the first time. You can reset the volume by clicking the “Reset” button. After adjusting the volume, click the play icon to listen to the effect.
Tip: There are more functions in this column, such as Fade in/fade out, fine tune the pitch, etc. If you want to add more effects, go to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.
3 Save the files
Then hit the “Create” icon to save the edited files. You can save your files to different formats such as WMV, MOV, AVI, MKV, MP4 or save to play on different devices such as iPhone, iPad, PSP and Zune. To do this, switch to the related tab, enter the preset settings and press “Create” to begin the export. The exported file should have the same video, but with louder audio. You can also burn the files to DVD or directly upload to YouTube if you choose.
See, it’s so easy to lower the volume of the media files. Besides this function, this powerful video editing tool also supports trimming, cropping, adding video effects and loads more. Now just download it and explore more features of it!
Here is a video tutorial for you:
About Filmora video editor:
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Liza Brown
Liza Brown is a writer and a lover of all things video.
Follow @Liza Brown
Also read:
- 2024 Approved Tips and Tricks for Syncing Audio in Animated Windows GIFs
- New In 2024, Boosting Call Joy with 5 Hilarious Voice Transformation Hacks
- Updated 2024 Approved Mastering the Art of Volume Control A Guide to Seamless Audio Transitions in Adobe After Effects
- New In 2024, Trail the Echoes of Game Soundscape
- New In 2024, Top 3 Premier Audio Amplification Websites for MP3s
- New Sonic Clarity Mastering Silence in Recorded Sound with Wondershare Filmora
- New In 2024, The Pro Guide to Silencing Ambient Music in Audacity for Pristine Recordings
- Updated 2024 Approved Voice Your Ideas for Free! Explore Top 9 Text-to-Speech Tools Online
- New 2024 Approved How to Record & Add Voiceover to Videos
- New How to Remove Audio From Video in Magix Movie Edit Pro
- Updated Eleven Strategies of Online Bliss A Listicle for a Tranquil State of Mind
- Tips for Enhancing iPhones Audio Experience by Disabling Ducking
- A Comprehensive Guide to PC Speaker Monitoring and Editing via Audacity for 2024
- New 2024 Approved Exploring the Peaks of MAGIX Samplitude A Comprehensive Review
- New In 2024, Linux Audioscapes Discover the 5 Leading Audio Recorders in Free Operating Systems
- Must-Listen YouTube Podcasts and Songs for 2024
- Unveiling the Essentials A Deep Dive Into Hip-Hop Culture
- Updated In 2024, Exploring the Finest Free, Web-Integrated Digital Audio Workstations
- New Advanced Techniques for Audio Detachment in Newly Updated MKV Files (MKV-2023)
- New Unveiling the Hidden Capabilities of TwistedWaves Audio Manipulation Toolkit for 2024
- New In 2024, Simple Vocal Transformation Facilities Analysis of Capabilities, Guidelines for Usage, and Multiple Approaches
- New From Surrounding Symphonies to Quietude The Gradual Roadmap for Eradicating Ambient Melodies
- Mastering the Airwaves An In-Depth Look at the Leading Free & Paid Podcast to Text Conversion Applications for 2024
- New 2024 Approved Steps for Extracting Audio From an MP4 Clip
- In 2024, 13+ Accessible No-Cost Audio Engineering Applications for All Platforms
- 2024 Approved Exploring 8 Premium and Affordable DAWs for Windows Enthusiasts
- New 2024 Approved How to Record on GarageBand? A Complete Guideline
- In 2024, The Premier Software Choices for Capturing the Essence of Your Strumming
- Updated Contemporary Techniques for Crafting Effective Audio Echoes for 2024
- New In 2024, SonicShifter Empowering You to Redefine Identity in Online Conversations on Skype.
- New Prime 11 Mobile Audio Processing Software for Creatives for 2024
- Updated Pioneering the Silent Echo Techniques and Tools for Gradual Audio Fading Released for 2024
- The Ultimate Guide to Purified Soundtracks Techniques and Software for Distraction-Free Voices Online
- How to Quickly Fix Bluetooth Not Working on Infinix Hot 30i | Dr.fone
- A How-To Guide on Bypassing the iPhone 14 Pro iCloud Lock
- How to Transfer Videos from Honor X50 to iPad | Dr.fone
- How to get the dragon scale and evolution-enabled pokemon On Honor X8b? | Dr.fone
- The Magnificent Art of Pokemon Go Streaming On Tecno Spark Go (2023)? | Dr.fone
- Here are Different Ways to Find Pokemon Go Trainer Codes to Add to Your Account On Apple iPhone 8 Plus | Dr.fone
- How to Share/Fake Location on WhatsApp for Apple iPhone 15 Pro Max | Dr.fone
- 3 Solutions to Hard Reset Lava Blaze Pro 5G Phone Using PC | Dr.fone
- In 2024, Top 10 Best Spy Watches For your Apple iPhone 13 Pro | Dr.fone
- Unlock iPhone 14 screen lock without password
- In 2024, Pokemon Go Error 12 Failed to Detect Location On Realme 11X 5G? | Dr.fone
- What To Do When Xiaomi Redmi Note 13 5G Has Black Screen of Death? | Dr.fone
- The Ultimate Guide to Xiaomi Redmi Note 12 Pro 5G Pattern Lock Screen Everything You Need to Know
- In 2024, AVS Video Editor Features, Pros, and Cons
- 5 Quick Methods to Bypass Xiaomi Redmi K70 Pro FRP
- Updated In 2024, The Ultimate List 5 Best Photo Slideshow Software for Beginners
- How To Activate and Use Life360 Ghost Mode On Realme GT 3 | Dr.fone
- How to Hard Reset Xiaomi 14 Ultra Without Password | Dr.fone
- Title: In 2024, Transformative Soundscape Design Proven Strategies for Smooth Volume Fading and Elevating with Adobe After Effects
- Author: Kate
- Created at : 2024-05-05 07:40:03
- Updated at : 2024-05-06 07:40:03
- Link: https://audio-editing.techidaily.com/in-2024-transformative-soundscape-design-proven-strategies-for-smooth-volume-fading-and-elevating-with-adobe-after-effects/
- License: This work is licensed under CC BY-NC-SA 4.0.