The Ultimate Guide to Music-Driven Editing: Perfect Pacing with Beat Alignment in Final Cut Pro X

How to Edit the Beat and Sync Videos to Music in Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

How to Fade In/Out Audio with Keyframes in Filmora for Mac

How to Fade In/Out Audio with Keyframes in Filmora for Mac

Benjamin Arango

Aug 18, 2022• Proven solutions

Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.

If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.

Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?

Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.

Step 1: Launch to Add Media Files

Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.

You can also execute “File > Import Media > Import media files” to bring the files into the timeline.

Step 2: Edit Audio

Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.

Increase or decrease the volume level based on which the clips should play.

Step 3: Adjust Volume and Add Keyframe

Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.

Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.

To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.

Part 2: How to Modify Audio Keyframes in Filmora for Mac?

Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.

Step 1: Modify Audio Keyframe

The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.

Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.

Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.

Step 2: Change Soundwaves

Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.

Step 3: Remove Background Noise

To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.

Step 4: Edit the Volume

If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.

It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.

Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?

Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.

Method 1

Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.

Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.

Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.

Method 2

• You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
• Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.

Conclusion

No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.

If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.

Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?

Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.

Step 1: Launch to Add Media Files

Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.

You can also execute “File > Import Media > Import media files” to bring the files into the timeline.

Step 2: Edit Audio

Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.

Increase or decrease the volume level based on which the clips should play.

Step 3: Adjust Volume and Add Keyframe

Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.

Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.

To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.

Part 2: How to Modify Audio Keyframes in Filmora for Mac?

Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.

Step 1: Modify Audio Keyframe

The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.

Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.

Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.

Step 2: Change Soundwaves

Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.

Step 3: Remove Background Noise

To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.

Step 4: Edit the Volume

If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.

It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.

Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?

Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.

Method 1

Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.

Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.

Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.

Method 2

• You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
• Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.

Conclusion

No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.

If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.

Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?

Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.

Step 1: Launch to Add Media Files

Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.

You can also execute “File > Import Media > Import media files” to bring the files into the timeline.

Step 2: Edit Audio

Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.

Increase or decrease the volume level based on which the clips should play.

Step 3: Adjust Volume and Add Keyframe

Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.

Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.

To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.

Part 2: How to Modify Audio Keyframes in Filmora for Mac?

Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.

Step 1: Modify Audio Keyframe

The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.

Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.

Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.

Step 2: Change Soundwaves

Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.

Step 3: Remove Background Noise

To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.

Step 4: Edit the Volume

If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.

It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.

Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?

Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.

Method 1

Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.

Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.

Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.

Method 2

• You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
• Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.

Conclusion

No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.

If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.

Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?

Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.

Step 1: Launch to Add Media Files

Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.

You can also execute “File > Import Media > Import media files” to bring the files into the timeline.

Step 2: Edit Audio

Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.

Increase or decrease the volume level based on which the clips should play.

Step 3: Adjust Volume and Add Keyframe

Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.

Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.

To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.

Part 2: How to Modify Audio Keyframes in Filmora for Mac?

Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.

Step 1: Modify Audio Keyframe

The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.

Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.

Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.

Step 2: Change Soundwaves

Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.

Step 3: Remove Background Noise

To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.

Step 4: Edit the Volume

If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.

It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.

Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?

Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.

Method 1

Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.

Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.

Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.

Method 2

• You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
• Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.

Conclusion

No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

“Professional Insights on Separating Soundtracks From Visual Media on Apple Technology”

How to Cut Audio from Video on iPhone/Mac

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Also read: