Synthesis and Shaping Sounds: The Essential List of Digital Audio Effects to Explore

7 Types of Audio Effects You Should Know

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Navigating the World of Public Domain Photography: The Pexels Experience

There is a great way to make your messages more impactful that is free to use. Pexels is an online creative assets library that features high-resolution photos, including Pexels 4k, and an assortment of audio clips you can use in your creations.

The following are things you need to know about Pexels.com. It includes details on what Pexels is, important user information, and other hidden features of the website. Keep reading to find out more.

Part1: Is Pexels.com free to use?

Yes, Pexels.com is a free online library of stock photos that you can use for personal or commercial purposes with your creations. In addition, photographers submit their images to the platform to allow others to reuse them.

Pexels’ free download policy allows you to obtain images under the Pexels or Creative common licensing rules. In addition, both licenses allow you to use Pexels images and videos for personal and commercial purposes, provided you make alterations to the original.

According to the site’s founders, the following are the reasons why the site is free:

• Its main source of revenue is selling advertisement slots to other paid-content databases.
• You can also donate to the website’s operational costs with a single click. In addition, there is no limitation on how much and how often you can donate.
• Most of the site’s contributors do so willingly to increase their brand exposure. For example, a verified user states that uploading his content to Pexels 4k and Pexels audio has resulted in an influx of high-paying customers.

So, what is the difference between paid and stock photo sites? Paid content databases such as Shutterstock and Deposit photos require you to create a user ID and subscribe to their service. Conversely, stock photo sites like Pexels.com feature free stock images and videos that you can use with minimal restrictions.

For example, the site allows you to use its content on YouTube for personal or commercial reasons, provided you make adjustments to the original asset, and you own the video. In addition, the site’s library features content that its contributors share willingly. As such, you can download content from these sites without creating an account or acknowledging the image owner.

Currently, you can access Pexels through your web browser or download the app on your Android or iOS device. In addition, you can also access the asset library through the Canva application following their merger. Furthermore, you can also download it as a plugin for different content creation software, including Photoshop, MS Office, and Google Slides.

Part2: What can Pexels provide you?

Now that you are aware of Pexels.com’s origin story and access methods, here is a rundown of what free access provides you.

1. 4K images for almost all topics

Pexels.com features a dedicated library of over 40,000 4k images from their contributors. You can access the library by typing 4k in the site’s search engine. In addition, the library is full of 4k images across various topics, including niche subjects such as Nebula and Abstract. Furthermore, the site’s search engine uses search tags to provide more accurate results. For example, by typing 4K Dark in the search engine, the site can narrow down your search to provide more relevant results.

2. Audio

You also get access to Pexels audio, a collection of over 8000 audio clips from the site’s numerous contributors. In addition, all of the Pexels audio’s content is completely free to use for all users. Currently, you can only access the database through your web browser and the iOS app.

3. Video

Another content category that your free access provides you is Pexels video. The database features a collection of over 2000 video clips you can use for your commercial or personal works. In addition, Pexels.com offers various editing tools to make alterations immediately. Furthermore, you also have templates for different content configurations, including social media and YouTube posts.

Part3: What’s Leaderboard and Challenges on Pexels.com?

The Pexels free download leaderboard is a list of the site’s top contributors within the past thirty days. The ranking is based on the number of views of photos and videos you submit within thirty days. For example, you earn the top spot if you receive the most views to your content, provided it is less than thirty days old. As such, each contributor has an equal chance of rising to the top, provided they put in the effort.

On the other hand, Pexels challenges are monthly competitions where contributors submit their best work to win different prizes. Typically, each challenge varies in the category, prizes, and content specifications. For example, the most recent challenge required contributors to upload images projecting friendship.

In addition, there is no limitation to the number of eligible uploads because challenge officials consider all of them. Finally, all images you submit for the Pexels challenge fall under the Pexels license, meaning they are free to use by the site’s visitors.

Part4: What are not allowed on Pexels?

Currently, all of the Pexels creative assets are under the Pexels license, a variation to the creative commons zero license other stock photo sites offer. Although you can access and download the site’s assets for free, there are some restrictions on your usage of them. Here is what Pexels.com’s free download license does not allow you to do with its assets.

1. It can’t be used in a political context

You cannot use Pexels free download videos, images, and audio clips in a political context. This is because some of the assets include identifiable people, and using their image may be seen as their endorsement of your political beliefs. In addition, the situation becomes worse if your ideology contains offensive material and messaging.

Furthermore, the Pexels license also bans using their creative assets to promote your personal brand, especially when they contain any identifiable imagery. By doing so, Pexels.com remains a free resource for people of all creeds, regardless of their political affiliations.

2. Resell the resources

Another thing you cannot do when using Pexels.com is to resell their photos and videos to other stock photograph platforms. Most users attribute this to the site’s owners wanting to maintain a fresher database than its competitors.

In addition, you can also consider the restriction as a way to prevent duplication of results on web searches and prevent the overuse of creative assets. As such, you cannot use their creative assets on items such as print media and physical goods, including T-shirts and mugs.

Part5: FAQs

Why should you create a Pexels account?

Pexels.com seeks to create a simple and fast medium for you to discover free photos and videos. It does so by providing a common platform where contributors can share their work with a greater audience. Here are some of the benefits of creating a Pexels.com account:

• You can create collections for different projects, accessible on different dashboards.
• Continuous free access to every creative asset you have ever downloaded. For example, you can access all images you have downloaded from Pexels 4K.
• You also get a custom homepage that features your latest work and database favorites.
• In addition, you will have access to the site’s community, which has helpful information for all users.

What are the rules for uploading videos on Pexels.com?

Here are the requirements for uploading videos on Pexels.com:

• Your videos must be of resolution 1920 X 1080 and higher.
• All videos should be free of explicit content such as nudity or violence.
• Your videos should not feature any watermarks, branding, or borders.
• The recording and scene transitions should be seamless.
• The site does not permit the uploading of animations.

What are the image uploading requirements on Pexels.com?

Pexels free download accepts images in JPEG format only. In addition, your images must also meet the following conditions.

• All photos need to be at least 4 megapixels and have a minimum resolution of 2592 X 1520 pixels.
• Your images should not contain any explicit material. All photos with graphic nudity and violence are banned from the website.
• Your photos should be well-oriented and should not include watermarks, text elements, or borders when uploading them to your pexelx.com account.

Does Pexels.com accept uploading of mobile photos?

Yes. Using the app, you can upload images from your smartphone’s internal storage directly to Pexels.com. In addition, other requirements must be met before your photo is approved. You can find out more from the upload guidelines on pexel.com.

What alterations can you make to use Pexels photos on your merchandise?

Pexels allows you to use its images for personal and commercial reasons if you alter them and make them your own. Some of the alterations the site recommends include:

• Adding graphic elements to the images using Pexels.com’s editing tool.
• Using part of the Pexels image in a greater project such as a collage or wallpaper.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

The Complete Tutorial on Audible Integration Into Video Editing Using Magix

How to add Audio to Video in Magix Movie Edit Pro

Shanoon Cox

Mar 27, 2024• Proven solutions

Having a perfect soundtrack to your videos is as important as having a perfectly captured footage, because the music and sounds you add to your videos, set the atmosphere of the video. Choosing the right music and atmospheric sounds to match the action taking place in the video is an important task that shouldn’t be taken lightly since the video’s reception by the audience depends on it. Failing to lip-sync or to add a knocking sound when someone is entering the room will reduce the realism of your film and break the illusion you tried so hard to create.

Let’s have a look at how you can add and remove audio files to video using Magix Movie Edit Pro video editing software.

How to add audio to video in Magix Movie Edit Pro

Before deciding to remove the audio file that was recorded together with the video clip, make sure that you already have sounds and music that will replace it. Having the audio recordings that match your video perfectly is of utmost importance because if you add files that don’t match the video the final result will be barely watchable.

1.Import the video clip and separate the video and audio

All video clips also contain an audio file, that isn’t displayed on the Magix Movie Edit Pro’s timeline until the two files are separated. In order to separate the audio and video file, you need to select the video file you placed on the timeline, by dragging it from the ‘Import’ tab and dropping it on the video track and then click on the ‘Ungroup’ icon on the editor’s timeline.

2.Remove and replace the files on the audio track

After clicking on the ‘Ungroup’ icon, you will be able to see an audio file on the editor’s audio track. If you would like to remove it from the project entirely, select the audio file and click on the ‘Delete’ button on your keyboard. However, if you would like to keep parts of the original audio track, select the file, place the playhead at the position in the file where you would like to make the cut and then click on the ‘Split objects’ icon on the toolbar. Repeat the same action at the position where you would like the sound file to end.

Adding new audio files to your project is simple, because all you need to do is head over to the ‘Import’ tab, locate the files you want to use in your video on your hard-drive and drag and drop them onto the audio track. Cut out the parts of the audio file you don’t want to use by clicking on the ‘’Split objects’ icon and make sure that the length of the audio matches the length of the video.

3.Edit the audio files

Magix Movie Edit Pro offers a large number of audio effects that can help you create a better soundtrack for your video. Click on the ‘Effects’ tab and slide down to the ‘Audio Effects’ section where you can adjust the volume, clean the background noises in the audio or apply some of many audio effects located under the ‘Audio Effects’ option. Additional audio effects can be purchased at the Magix Movie Edit Pro’s store, but some of the effects can be pricey for consumer-level video editors.

If you would like to merge the freshly created audio file with the video file after you applied all the audio effects you wanted, simply click on the ‘Group’ icon, located next to the ‘Ungroup’ icon on the editor’s toolbar.

Alternative Way of Adding Audio to a Video

Even though adding audio files to videos isn’t such a complicated process in Magix Movie Edit Pro, you might still consider using a video editing software that provides more options for audio editing. Wondershare Filmora will enable you to split, trim, add or remove audio files from your project in just a few simple steps. The software also gives you access to numerous royalty free music tracks that can be used in videos created with Filmora. Producing great visual content with Filmora video editing software is a simple process that can be completed in a short period of time, due to the abundance of the editing tools that make the editing process fast and easy.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Having a perfect soundtrack to your videos is as important as having a perfectly captured footage, because the music and sounds you add to your videos, set the atmosphere of the video. Choosing the right music and atmospheric sounds to match the action taking place in the video is an important task that shouldn’t be taken lightly since the video’s reception by the audience depends on it. Failing to lip-sync or to add a knocking sound when someone is entering the room will reduce the realism of your film and break the illusion you tried so hard to create.

Let’s have a look at how you can add and remove audio files to video using Magix Movie Edit Pro video editing software.

How to add audio to video in Magix Movie Edit Pro

Before deciding to remove the audio file that was recorded together with the video clip, make sure that you already have sounds and music that will replace it. Having the audio recordings that match your video perfectly is of utmost importance because if you add files that don’t match the video the final result will be barely watchable.

1.Import the video clip and separate the video and audio

All video clips also contain an audio file, that isn’t displayed on the Magix Movie Edit Pro’s timeline until the two files are separated. In order to separate the audio and video file, you need to select the video file you placed on the timeline, by dragging it from the ‘Import’ tab and dropping it on the video track and then click on the ‘Ungroup’ icon on the editor’s timeline.

2.Remove and replace the files on the audio track

After clicking on the ‘Ungroup’ icon, you will be able to see an audio file on the editor’s audio track. If you would like to remove it from the project entirely, select the audio file and click on the ‘Delete’ button on your keyboard. However, if you would like to keep parts of the original audio track, select the file, place the playhead at the position in the file where you would like to make the cut and then click on the ‘Split objects’ icon on the toolbar. Repeat the same action at the position where you would like the sound file to end.

Adding new audio files to your project is simple, because all you need to do is head over to the ‘Import’ tab, locate the files you want to use in your video on your hard-drive and drag and drop them onto the audio track. Cut out the parts of the audio file you don’t want to use by clicking on the ‘’Split objects’ icon and make sure that the length of the audio matches the length of the video.

3.Edit the audio files

Magix Movie Edit Pro offers a large number of audio effects that can help you create a better soundtrack for your video. Click on the ‘Effects’ tab and slide down to the ‘Audio Effects’ section where you can adjust the volume, clean the background noises in the audio or apply some of many audio effects located under the ‘Audio Effects’ option. Additional audio effects can be purchased at the Magix Movie Edit Pro’s store, but some of the effects can be pricey for consumer-level video editors.

If you would like to merge the freshly created audio file with the video file after you applied all the audio effects you wanted, simply click on the ‘Group’ icon, located next to the ‘Ungroup’ icon on the editor’s toolbar.

Alternative Way of Adding Audio to a Video

Even though adding audio files to videos isn’t such a complicated process in Magix Movie Edit Pro, you might still consider using a video editing software that provides more options for audio editing. Wondershare Filmora will enable you to split, trim, add or remove audio files from your project in just a few simple steps. The software also gives you access to numerous royalty free music tracks that can be used in videos created with Filmora. Producing great visual content with Filmora video editing software is a simple process that can be completed in a short period of time, due to the abundance of the editing tools that make the editing process fast and easy.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Having a perfect soundtrack to your videos is as important as having a perfectly captured footage, because the music and sounds you add to your videos, set the atmosphere of the video. Choosing the right music and atmospheric sounds to match the action taking place in the video is an important task that shouldn’t be taken lightly since the video’s reception by the audience depends on it. Failing to lip-sync or to add a knocking sound when someone is entering the room will reduce the realism of your film and break the illusion you tried so hard to create.

Let’s have a look at how you can add and remove audio files to video using Magix Movie Edit Pro video editing software.

How to add audio to video in Magix Movie Edit Pro

Before deciding to remove the audio file that was recorded together with the video clip, make sure that you already have sounds and music that will replace it. Having the audio recordings that match your video perfectly is of utmost importance because if you add files that don’t match the video the final result will be barely watchable.

1.Import the video clip and separate the video and audio

All video clips also contain an audio file, that isn’t displayed on the Magix Movie Edit Pro’s timeline until the two files are separated. In order to separate the audio and video file, you need to select the video file you placed on the timeline, by dragging it from the ‘Import’ tab and dropping it on the video track and then click on the ‘Ungroup’ icon on the editor’s timeline.

2.Remove and replace the files on the audio track

After clicking on the ‘Ungroup’ icon, you will be able to see an audio file on the editor’s audio track. If you would like to remove it from the project entirely, select the audio file and click on the ‘Delete’ button on your keyboard. However, if you would like to keep parts of the original audio track, select the file, place the playhead at the position in the file where you would like to make the cut and then click on the ‘Split objects’ icon on the toolbar. Repeat the same action at the position where you would like the sound file to end.

Adding new audio files to your project is simple, because all you need to do is head over to the ‘Import’ tab, locate the files you want to use in your video on your hard-drive and drag and drop them onto the audio track. Cut out the parts of the audio file you don’t want to use by clicking on the ‘’Split objects’ icon and make sure that the length of the audio matches the length of the video.

3.Edit the audio files

Magix Movie Edit Pro offers a large number of audio effects that can help you create a better soundtrack for your video. Click on the ‘Effects’ tab and slide down to the ‘Audio Effects’ section where you can adjust the volume, clean the background noises in the audio or apply some of many audio effects located under the ‘Audio Effects’ option. Additional audio effects can be purchased at the Magix Movie Edit Pro’s store, but some of the effects can be pricey for consumer-level video editors.

If you would like to merge the freshly created audio file with the video file after you applied all the audio effects you wanted, simply click on the ‘Group’ icon, located next to the ‘Ungroup’ icon on the editor’s toolbar.

Alternative Way of Adding Audio to a Video

Even though adding audio files to videos isn’t such a complicated process in Magix Movie Edit Pro, you might still consider using a video editing software that provides more options for audio editing. Wondershare Filmora will enable you to split, trim, add or remove audio files from your project in just a few simple steps. The software also gives you access to numerous royalty free music tracks that can be used in videos created with Filmora. Producing great visual content with Filmora video editing software is a simple process that can be completed in a short period of time, due to the abundance of the editing tools that make the editing process fast and easy.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Having a perfect soundtrack to your videos is as important as having a perfectly captured footage, because the music and sounds you add to your videos, set the atmosphere of the video. Choosing the right music and atmospheric sounds to match the action taking place in the video is an important task that shouldn’t be taken lightly since the video’s reception by the audience depends on it. Failing to lip-sync or to add a knocking sound when someone is entering the room will reduce the realism of your film and break the illusion you tried so hard to create.

Let’s have a look at how you can add and remove audio files to video using Magix Movie Edit Pro video editing software.

How to add audio to video in Magix Movie Edit Pro

Before deciding to remove the audio file that was recorded together with the video clip, make sure that you already have sounds and music that will replace it. Having the audio recordings that match your video perfectly is of utmost importance because if you add files that don’t match the video the final result will be barely watchable.

1.Import the video clip and separate the video and audio

All video clips also contain an audio file, that isn’t displayed on the Magix Movie Edit Pro’s timeline until the two files are separated. In order to separate the audio and video file, you need to select the video file you placed on the timeline, by dragging it from the ‘Import’ tab and dropping it on the video track and then click on the ‘Ungroup’ icon on the editor’s timeline.

2.Remove and replace the files on the audio track

After clicking on the ‘Ungroup’ icon, you will be able to see an audio file on the editor’s audio track. If you would like to remove it from the project entirely, select the audio file and click on the ‘Delete’ button on your keyboard. However, if you would like to keep parts of the original audio track, select the file, place the playhead at the position in the file where you would like to make the cut and then click on the ‘Split objects’ icon on the toolbar. Repeat the same action at the position where you would like the sound file to end.

Adding new audio files to your project is simple, because all you need to do is head over to the ‘Import’ tab, locate the files you want to use in your video on your hard-drive and drag and drop them onto the audio track. Cut out the parts of the audio file you don’t want to use by clicking on the ‘’Split objects’ icon and make sure that the length of the audio matches the length of the video.

3.Edit the audio files

Magix Movie Edit Pro offers a large number of audio effects that can help you create a better soundtrack for your video. Click on the ‘Effects’ tab and slide down to the ‘Audio Effects’ section where you can adjust the volume, clean the background noises in the audio or apply some of many audio effects located under the ‘Audio Effects’ option. Additional audio effects can be purchased at the Magix Movie Edit Pro’s store, but some of the effects can be pricey for consumer-level video editors.

If you would like to merge the freshly created audio file with the video file after you applied all the audio effects you wanted, simply click on the ‘Group’ icon, located next to the ‘Ungroup’ icon on the editor’s toolbar.

Alternative Way of Adding Audio to a Video

Even though adding audio files to videos isn’t such a complicated process in Magix Movie Edit Pro, you might still consider using a video editing software that provides more options for audio editing. Wondershare Filmora will enable you to split, trim, add or remove audio files from your project in just a few simple steps. The software also gives you access to numerous royalty free music tracks that can be used in videos created with Filmora. Producing great visual content with Filmora video editing software is a simple process that can be completed in a short period of time, due to the abundance of the editing tools that make the editing process fast and easy.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: