Perfecting the Playback: Speed and Pitch Control for Enhanced Soundscapes in Adobe Rush

How to Change Audio Speed and Pitch in Adobe Rush

Liza Brown

Mar 27, 2024• Proven solutions

Don’t you just hate the sound of your own voice? As much as most of us have perfectly pleasant voices, regardless of how they sound when we hear them played back, sometimes we just don’t have a good quality voice for video making.

Some people try to get around this by relying on the written word. While that’s OK in some situations, it’s just not as engaging as a high-quality voiceover. So, what can you do?

Many video makers have found great success in altering their voice ever so slightly. If they have a tendency to garble, slowing things down can help them get their point across better. Similarly, if they have a somewhat squeaky voice, adjusting the tone down a couple of notches can make them appear more authoritative.

Good video editing tools will allow you to play with the speed and pitch of your audio recordings, and not just voices either. Perhaps you want to jazz up a piece of music by playing it faster or add a playful element to your video by cranking the pitch of the music up to chipmunk levels.

Whatever you have in mind, being able to edit the speed and tone of audio in our videos opens up a world of possibilities for voiceover, music and more.

Adjusting speed and pitch in Adobe Rush

We were excited to see what Adobe had in store for us as soon as they started talking about Rush. Branded a tool for the social media generation, it promised incredible usability, effortless integration with a variety of platforms and all the wonderful editing powers that Adobe are renowned for.

However, there have been more than a few oversights in what Adobe actually produced.

Users have complained that its slow, that rendering takes too long and that the software can be unstable. Worse than that, it seems that a number of key features are missing, such as being able to adjust the speed of video and to change the pitch and speed of audio too.

In short, if you’re looking for a way to edit audio to be slower or faster, higher or lower in Adobe Rush, you simply can’t. However, there is an alternative.

From the team at Wondershare comes a package known as Filmora ; an all in one video editing suite designed to do everything you need, and more. Within the capabilities of this software is the ability to edit your audio’s pitch and speed, so that you can create the perfect auditory accompaniment to your movies and videos.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio in Filmora

Using the tools built into Filmora, you can change the pitch and speed of audio in just a few clicks. The function works on all imported audio, whether its attached to the video, recorded separately or is music that you’ve added to your library.

We’ll talk you thorough how to use these editing tools, so that you know you’ve got an alternative to Adobe Rush.

The easiest way to edit the pitch of the audio in Filmora is to use the edit button on the control panel. Highlight the clip you want to edit, then use the button which features three lines with sliders.

Clicking this button will open up the edit menu, which allows you to edit video, audio, color and motion. Within the audio edit, you can fade the soundtrack in and out, can alter the pitch and can adjust the volume and equalizer settings too.

Within this menu, a handy tool will allow you to ‘remove background noise’ also. You can also set audio to fade in or out and can adjust the equalizer to suit the type of audio you’re working with.

To change the speed of the audio along with the pictures, you can use the speedometer button above your track. You can also right click the clip and choose ‘Speed and duration’, or even use the shortcut ctrl+R to open the speed change menu directly.

If you wish to change the speed of the audio without changing the video at all, you’ll need to detach the audio from the video clip. This is simple; just right click the clip in question and select ‘Detach Audio’. You can now edit the audio independently of the video.

Of course, if you’re working on audio which is standalone, e.g. a voiceover or some music you want to play with your video, there’s no requirement to detach it from any video clip.

On the right-hand side of the screen, you’ll also discover the Audio Mixer, in the button with the musical notes on it. Clicking on this brings up an advanced audio adjuster, which can help you create a better audio quality for your video.

This allows you to adjust the specific settings of the videos you’ve uploaded, as well as any additional audio tracks you’ve added to your project. You can work in stereo or surround sound and can control the direction of all the audio within the mixer.

Wondershare Filmora has managed to not only provide a service Adobe has not, they’ve made it super easy too. Why don’t you try out the free version of Filmora for yourself and see why we recommend this for all your video editing needs.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Don’t you just hate the sound of your own voice? As much as most of us have perfectly pleasant voices, regardless of how they sound when we hear them played back, sometimes we just don’t have a good quality voice for video making.

Some people try to get around this by relying on the written word. While that’s OK in some situations, it’s just not as engaging as a high-quality voiceover. So, what can you do?

Many video makers have found great success in altering their voice ever so slightly. If they have a tendency to garble, slowing things down can help them get their point across better. Similarly, if they have a somewhat squeaky voice, adjusting the tone down a couple of notches can make them appear more authoritative.

Good video editing tools will allow you to play with the speed and pitch of your audio recordings, and not just voices either. Perhaps you want to jazz up a piece of music by playing it faster or add a playful element to your video by cranking the pitch of the music up to chipmunk levels.

Whatever you have in mind, being able to edit the speed and tone of audio in our videos opens up a world of possibilities for voiceover, music and more.

Adjusting speed and pitch in Adobe Rush

We were excited to see what Adobe had in store for us as soon as they started talking about Rush. Branded a tool for the social media generation, it promised incredible usability, effortless integration with a variety of platforms and all the wonderful editing powers that Adobe are renowned for.

However, there have been more than a few oversights in what Adobe actually produced.

Users have complained that its slow, that rendering takes too long and that the software can be unstable. Worse than that, it seems that a number of key features are missing, such as being able to adjust the speed of video and to change the pitch and speed of audio too.

In short, if you’re looking for a way to edit audio to be slower or faster, higher or lower in Adobe Rush, you simply can’t. However, there is an alternative.

From the team at Wondershare comes a package known as Filmora ; an all in one video editing suite designed to do everything you need, and more. Within the capabilities of this software is the ability to edit your audio’s pitch and speed, so that you can create the perfect auditory accompaniment to your movies and videos.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio in Filmora

Using the tools built into Filmora, you can change the pitch and speed of audio in just a few clicks. The function works on all imported audio, whether its attached to the video, recorded separately or is music that you’ve added to your library.

We’ll talk you thorough how to use these editing tools, so that you know you’ve got an alternative to Adobe Rush.

The easiest way to edit the pitch of the audio in Filmora is to use the edit button on the control panel. Highlight the clip you want to edit, then use the button which features three lines with sliders.

Clicking this button will open up the edit menu, which allows you to edit video, audio, color and motion. Within the audio edit, you can fade the soundtrack in and out, can alter the pitch and can adjust the volume and equalizer settings too.

Within this menu, a handy tool will allow you to ‘remove background noise’ also. You can also set audio to fade in or out and can adjust the equalizer to suit the type of audio you’re working with.

To change the speed of the audio along with the pictures, you can use the speedometer button above your track. You can also right click the clip and choose ‘Speed and duration’, or even use the shortcut ctrl+R to open the speed change menu directly.

If you wish to change the speed of the audio without changing the video at all, you’ll need to detach the audio from the video clip. This is simple; just right click the clip in question and select ‘Detach Audio’. You can now edit the audio independently of the video.

Of course, if you’re working on audio which is standalone, e.g. a voiceover or some music you want to play with your video, there’s no requirement to detach it from any video clip.

On the right-hand side of the screen, you’ll also discover the Audio Mixer, in the button with the musical notes on it. Clicking on this brings up an advanced audio adjuster, which can help you create a better audio quality for your video.

This allows you to adjust the specific settings of the videos you’ve uploaded, as well as any additional audio tracks you’ve added to your project. You can work in stereo or surround sound and can control the direction of all the audio within the mixer.

Wondershare Filmora has managed to not only provide a service Adobe has not, they’ve made it super easy too. Why don’t you try out the free version of Filmora for yourself and see why we recommend this for all your video editing needs.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Don’t you just hate the sound of your own voice? As much as most of us have perfectly pleasant voices, regardless of how they sound when we hear them played back, sometimes we just don’t have a good quality voice for video making.

Some people try to get around this by relying on the written word. While that’s OK in some situations, it’s just not as engaging as a high-quality voiceover. So, what can you do?

Many video makers have found great success in altering their voice ever so slightly. If they have a tendency to garble, slowing things down can help them get their point across better. Similarly, if they have a somewhat squeaky voice, adjusting the tone down a couple of notches can make them appear more authoritative.

Good video editing tools will allow you to play with the speed and pitch of your audio recordings, and not just voices either. Perhaps you want to jazz up a piece of music by playing it faster or add a playful element to your video by cranking the pitch of the music up to chipmunk levels.

Whatever you have in mind, being able to edit the speed and tone of audio in our videos opens up a world of possibilities for voiceover, music and more.

Adjusting speed and pitch in Adobe Rush

We were excited to see what Adobe had in store for us as soon as they started talking about Rush. Branded a tool for the social media generation, it promised incredible usability, effortless integration with a variety of platforms and all the wonderful editing powers that Adobe are renowned for.

However, there have been more than a few oversights in what Adobe actually produced.

Users have complained that its slow, that rendering takes too long and that the software can be unstable. Worse than that, it seems that a number of key features are missing, such as being able to adjust the speed of video and to change the pitch and speed of audio too.

In short, if you’re looking for a way to edit audio to be slower or faster, higher or lower in Adobe Rush, you simply can’t. However, there is an alternative.

From the team at Wondershare comes a package known as Filmora ; an all in one video editing suite designed to do everything you need, and more. Within the capabilities of this software is the ability to edit your audio’s pitch and speed, so that you can create the perfect auditory accompaniment to your movies and videos.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio in Filmora

Using the tools built into Filmora, you can change the pitch and speed of audio in just a few clicks. The function works on all imported audio, whether its attached to the video, recorded separately or is music that you’ve added to your library.

We’ll talk you thorough how to use these editing tools, so that you know you’ve got an alternative to Adobe Rush.

The easiest way to edit the pitch of the audio in Filmora is to use the edit button on the control panel. Highlight the clip you want to edit, then use the button which features three lines with sliders.

Clicking this button will open up the edit menu, which allows you to edit video, audio, color and motion. Within the audio edit, you can fade the soundtrack in and out, can alter the pitch and can adjust the volume and equalizer settings too.

Within this menu, a handy tool will allow you to ‘remove background noise’ also. You can also set audio to fade in or out and can adjust the equalizer to suit the type of audio you’re working with.

To change the speed of the audio along with the pictures, you can use the speedometer button above your track. You can also right click the clip and choose ‘Speed and duration’, or even use the shortcut ctrl+R to open the speed change menu directly.

If you wish to change the speed of the audio without changing the video at all, you’ll need to detach the audio from the video clip. This is simple; just right click the clip in question and select ‘Detach Audio’. You can now edit the audio independently of the video.

Of course, if you’re working on audio which is standalone, e.g. a voiceover or some music you want to play with your video, there’s no requirement to detach it from any video clip.

On the right-hand side of the screen, you’ll also discover the Audio Mixer, in the button with the musical notes on it. Clicking on this brings up an advanced audio adjuster, which can help you create a better audio quality for your video.

This allows you to adjust the specific settings of the videos you’ve uploaded, as well as any additional audio tracks you’ve added to your project. You can work in stereo or surround sound and can control the direction of all the audio within the mixer.

Wondershare Filmora has managed to not only provide a service Adobe has not, they’ve made it super easy too. Why don’t you try out the free version of Filmora for yourself and see why we recommend this for all your video editing needs.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Don’t you just hate the sound of your own voice? As much as most of us have perfectly pleasant voices, regardless of how they sound when we hear them played back, sometimes we just don’t have a good quality voice for video making.

Some people try to get around this by relying on the written word. While that’s OK in some situations, it’s just not as engaging as a high-quality voiceover. So, what can you do?

Many video makers have found great success in altering their voice ever so slightly. If they have a tendency to garble, slowing things down can help them get their point across better. Similarly, if they have a somewhat squeaky voice, adjusting the tone down a couple of notches can make them appear more authoritative.

Good video editing tools will allow you to play with the speed and pitch of your audio recordings, and not just voices either. Perhaps you want to jazz up a piece of music by playing it faster or add a playful element to your video by cranking the pitch of the music up to chipmunk levels.

Whatever you have in mind, being able to edit the speed and tone of audio in our videos opens up a world of possibilities for voiceover, music and more.

Adjusting speed and pitch in Adobe Rush

We were excited to see what Adobe had in store for us as soon as they started talking about Rush. Branded a tool for the social media generation, it promised incredible usability, effortless integration with a variety of platforms and all the wonderful editing powers that Adobe are renowned for.

However, there have been more than a few oversights in what Adobe actually produced.

Users have complained that its slow, that rendering takes too long and that the software can be unstable. Worse than that, it seems that a number of key features are missing, such as being able to adjust the speed of video and to change the pitch and speed of audio too.

In short, if you’re looking for a way to edit audio to be slower or faster, higher or lower in Adobe Rush, you simply can’t. However, there is an alternative.

From the team at Wondershare comes a package known as Filmora ; an all in one video editing suite designed to do everything you need, and more. Within the capabilities of this software is the ability to edit your audio’s pitch and speed, so that you can create the perfect auditory accompaniment to your movies and videos.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio in Filmora

Using the tools built into Filmora, you can change the pitch and speed of audio in just a few clicks. The function works on all imported audio, whether its attached to the video, recorded separately or is music that you’ve added to your library.

We’ll talk you thorough how to use these editing tools, so that you know you’ve got an alternative to Adobe Rush.

The easiest way to edit the pitch of the audio in Filmora is to use the edit button on the control panel. Highlight the clip you want to edit, then use the button which features three lines with sliders.

Clicking this button will open up the edit menu, which allows you to edit video, audio, color and motion. Within the audio edit, you can fade the soundtrack in and out, can alter the pitch and can adjust the volume and equalizer settings too.

Within this menu, a handy tool will allow you to ‘remove background noise’ also. You can also set audio to fade in or out and can adjust the equalizer to suit the type of audio you’re working with.

To change the speed of the audio along with the pictures, you can use the speedometer button above your track. You can also right click the clip and choose ‘Speed and duration’, or even use the shortcut ctrl+R to open the speed change menu directly.

If you wish to change the speed of the audio without changing the video at all, you’ll need to detach the audio from the video clip. This is simple; just right click the clip in question and select ‘Detach Audio’. You can now edit the audio independently of the video.

Of course, if you’re working on audio which is standalone, e.g. a voiceover or some music you want to play with your video, there’s no requirement to detach it from any video clip.

On the right-hand side of the screen, you’ll also discover the Audio Mixer, in the button with the musical notes on it. Clicking on this brings up an advanced audio adjuster, which can help you create a better audio quality for your video.

This allows you to adjust the specific settings of the videos you’ve uploaded, as well as any additional audio tracks you’ve added to your project. You can work in stereo or surround sound and can control the direction of all the audio within the mixer.

Wondershare Filmora has managed to not only provide a service Adobe has not, they’ve made it super easy too. Why don’t you try out the free version of Filmora for yourself and see why we recommend this for all your video editing needs.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Ultimate Guide to Clear Sound: Eradicating Audio Distortion in Multimedia Projects

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Streamlining Your Projects: Techniques for Trimming Video Audio on iOS Devices

Cutting Audio in iMovie: A Guide for Mac and iPhone Users

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Also read: