Mastering Silence: Techniques for Eliminating Sibilance in Recordings

Creating content can be fun most of the time. The shoot is perfect and the scenes are spotless. You are confident that you got everything right. But then, when you listen to the recording, you notice a continuous hissing sound. This takes you back as you have to decide to remove hiss from audio before editing the video. Luckily, several hiss removal approaches will work just fine. In this article, we take you through the audio cleanup process to help you with your hiss reduction efforts.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

The Technician’s Guide to Transforming Distorted Audio Into High-Quality Video Content

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

“Cost-Free Audio Enhancement in Photos for Android and Windows Users”

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

If you have a special occasion coming up, then the best way to make it better is to add music to photo. If you’re wondering how to add music to photo then we have a collection of free websites and apps to add music to the photos of your choice.

We are going to take you on a journey to capture the magic of special moments and make them better. Read on to learn about the best apps to add music to photo, websites providing this service for free. You can choose to add music to one photo or multiples.

In this article

01 [Before Adding Music To Photo, What Do You Need To Prepare?](#Part 1)

02 [Add Music To Photo On Pc](#Part 2)

03 [App To Add Music In Photo ](#Part 3)

04 [How About Adding Music To Photo Online [Pros & Cons]](#Part 4)

Part 1 Before Adding Music To Photo, What Do You Need To Prepare?

This is the golden question you need to ask yourself before you dive into creating the perfect musical image. What does the occasion stand for? What values are you hoping to showcase? What moments make you cherish the bonds between you and the recipient? What sets them apart from the rest?

These are all worthwhile questions to ask before you start compiling your photos. Find the photos that commemorate the best parts of the relationship. Find images that highlight that. Now, let’s look at how to add music in photo.

Part 2 Add Music To Photo On Pc

There are many ways to add music to photo on your PC. You can learn how to add music on photos online and offline. The internet offers several websites where you can browse online and add music to photo.

2.1 For Win & Mac

When you’re trying to learn how to add music with photo, you’re going to need a video editor. If you want to turn your fondest memories into a stunning slideshow or a thoughtful video, then this software is the solution for you.

● Wondershare Filmora

Wondershare Filmora is a brand new way to conduct video editing. This helps if you’re just starting out and wondering ‘how do I add music to a photo?’. This also works if you’re a professional If you’re looking for the best video editor online for free to add music to photo? Then wonder no more, because you can use Wondershare Filmora today! It can be downloaded online and can be used on your desktop or MacBook.

There are two ways to save time and increase your efficiency. Let’s get the ball rolling with these two ways.

Firstly, you can simply import the photos. It doesn’t matter if you have one photo or many. You can simply add them to the Wondershare Filmora timeline using the “Import” function on the ‘Media’ tab.

Follow this up by adding the music to the timeline. You can edit the duration of each video, the music clip that plays when this image is on the screen. It lets you edit your music clip to fit the photos. Export the resultant clip in your preferred format.

2.2 Only For Mac

Mac users need never fear, we’ve got you covered on how to add music in a photo.

● iMovie

iMovie software is the classic way to enhance your storytelling skills through the cinematic enhancements offered. It’s a way to enhance photos, add music to video. iMovie can easily help you learn how to add music to one photo or many. You can edit the images with some special effects for each image. Simply export the video when you’re done.

It also comes in app form.

● Wondershare Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Secondly, you can use Wondershare Filmora on your macOS. One of the better video editing tools out there.

It is well suited for both beginners and those working in the industry. It’s well regarded by both.

You can add music to photos free if you download the free version of the software. You can choose to import audio from your personal files. Another option is to use audio from the royalty-free library available on Filmora.

It lets you drag and drop each image to import the file. You can also apply individual effects to the images when you’re editing. The best part? You can use a green screen to create a picture-in-picture effect.

As a bonus, you can also use some effect or animation to make the photo interesting, With the editing option, you can rotate the image, crop, or flip the image vertically. As for the animation, you can use keyframing to create incredible animations on Filmora.

Part 3 App To Add Music In Photo

Our phones are an indispensable part of our lives. We can use them to find a free app to add music to photos. We can quickly add music to photo in apps for free with the following recommendations.

BeeCut (iOS)

BeeCut is the app to add music to photo. You can add a single image or multiple images using this app. Download this app on the App Store. This app allows you to not just add music to photo but also cut, crop, and rotate the images. You can add transitions and effects to make entertaining content.

Enrich your storytelling with popular video aspect ratios on the market. After you’re happy with the editing, simply download the file as 1080p or in HD. The downloaded file will not have any watermarks and you won’t even have to pay a fee for the output.

Photo Video Maker With Music (Android)

Photo Video Maker With Music is an app on android available through the Play Store. It’s the kind of software that can add music to photo app for android. If you’re looking for the perfect add music to photo app download, this is the one to go for. It helps you create a video with just images and music.

It can function as a slideshow and video-maker. It uses high-quality downloads and smoother transitions to make the experience better. You can add as many photos and videos as you like in any sequence. You can also upload songs from your device or online. You can even add music to video from google photos.

To the online photo add music of your choice. Add music to one photo in app or many photos, at your convenience. If you’re looking for the perfect ‘add music to photo’ app download then this is the music for you.

Part 4 How About Adding Music To Photo Online [Pros & Cons]

If you don’t want to bother with the hassle of downloading software that can help. Then you can use these online websites for a fast, easy and convenient way to create magic.

InVideo

InVideo is an easy and stunning way to add music to photo. This online platform can provide customizable templates that let your creativity shine. It can even create particular templates for different social media platforms like Facebook, YouTube, Instagram, and more.

Thanks to the user-friendly nature, you can add transformative elements to the images to hone their shine. It offers an inbuilt library with millions of stock footage, images, and royalty-free music.

You can also add incredible effects, light features, and other kinds of cool effects. Even if you don’t know how to add music to a gif in photoshop, you can do it easily here.

Animoto

Animoto provides slideshow content that is a great way to promote your adventures, establish a business, and keep and convey memorable moments. Animoto’s slideshow creator is simple to get and master.

To convey your narrative, easily import your images and video clips into this online slideshow builder, then add text and audio. Once you’ve finished your video, feel free to share it with family and friends.

You can benefit from the customized templates available. It offers thematic templates as well. This makes creating the video that much sweeter.

The output formats are all HD. You can achieve crystalline clarity with this online tool.

Pros

Convenient

Expedites the editing process

Offers an opportunity to explore cool effects on images

Allows you to pick personal or Royalty-free music

Free service

Cons

Time-consuming

Some can support only one soundtrack or only one image.

It can be slow and laborious with slow internet speed

If you want to ensure the content you create is not limited by the number of photos or duration, you can choose Wondershare Filmora.

With Filmora, you are not limited in either the length of the video, the quality of audio, or the sequence. It can help polish your creation with better image quality enhancements, effects that are transformative.

It can improve your efficiency, helping you create your video quickly. This makes your photos more interesting and emotionally fulfilling.

With many of these software, incorporating music is as simple as dragging a recording onto a timeline. You can use any of these software to add music to photo. You can easily upload audio to a photo if you grasp enough to use a smartphone. Picking music that will compliment your idea is the tricky aspect.

Quality is the foundation of art, and the only way to properly enhance your art is to practice. Don’t be scared to take images of such things that most people overlook. Utilize things through music that most people aren’t aware of to help your work thrive!

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Try It Free Try It Free

If you have a special occasion coming up, then the best way to make it better is to add music to photo. If you’re wondering how to add music to photo then we have a collection of free websites and apps to add music to the photos of your choice.

We are going to take you on a journey to capture the magic of special moments and make them better. Read on to learn about the best apps to add music to photo, websites providing this service for free. You can choose to add music to one photo or multiples.

In this article

01 [Before Adding Music To Photo, What Do You Need To Prepare?](#Part 1)

02 [Add Music To Photo On Pc](#Part 2)

03 [App To Add Music In Photo ](#Part 3)

04 [How About Adding Music To Photo Online [Pros & Cons]](#Part 4)

Part 1 Before Adding Music To Photo, What Do You Need To Prepare?

This is the golden question you need to ask yourself before you dive into creating the perfect musical image. What does the occasion stand for? What values are you hoping to showcase? What moments make you cherish the bonds between you and the recipient? What sets them apart from the rest?

These are all worthwhile questions to ask before you start compiling your photos. Find the photos that commemorate the best parts of the relationship. Find images that highlight that. Now, let’s look at how to add music in photo.

Part 2 Add Music To Photo On Pc

There are many ways to add music to photo on your PC. You can learn how to add music on photos online and offline. The internet offers several websites where you can browse online and add music to photo.

2.1 For Win & Mac

When you’re trying to learn how to add music with photo, you’re going to need a video editor. If you want to turn your fondest memories into a stunning slideshow or a thoughtful video, then this software is the solution for you.

● Wondershare Filmora

Wondershare Filmora is a brand new way to conduct video editing. This helps if you’re just starting out and wondering ‘how do I add music to a photo?’. This also works if you’re a professional If you’re looking for the best video editor online for free to add music to photo? Then wonder no more, because you can use Wondershare Filmora today! It can be downloaded online and can be used on your desktop or MacBook.

There are two ways to save time and increase your efficiency. Let’s get the ball rolling with these two ways.

Firstly, you can simply import the photos. It doesn’t matter if you have one photo or many. You can simply add them to the Wondershare Filmora timeline using the “Import” function on the ‘Media’ tab.

Follow this up by adding the music to the timeline. You can edit the duration of each video, the music clip that plays when this image is on the screen. It lets you edit your music clip to fit the photos. Export the resultant clip in your preferred format.

2.2 Only For Mac

Mac users need never fear, we’ve got you covered on how to add music in a photo.

● iMovie

iMovie software is the classic way to enhance your storytelling skills through the cinematic enhancements offered. It’s a way to enhance photos, add music to video. iMovie can easily help you learn how to add music to one photo or many. You can edit the images with some special effects for each image. Simply export the video when you’re done.

It also comes in app form.

● Wondershare Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Secondly, you can use Wondershare Filmora on your macOS. One of the better video editing tools out there.

It is well suited for both beginners and those working in the industry. It’s well regarded by both.

You can add music to photos free if you download the free version of the software. You can choose to import audio from your personal files. Another option is to use audio from the royalty-free library available on Filmora.

It lets you drag and drop each image to import the file. You can also apply individual effects to the images when you’re editing. The best part? You can use a green screen to create a picture-in-picture effect.

As a bonus, you can also use some effect or animation to make the photo interesting, With the editing option, you can rotate the image, crop, or flip the image vertically. As for the animation, you can use keyframing to create incredible animations on Filmora.

Part 3 App To Add Music In Photo

Our phones are an indispensable part of our lives. We can use them to find a free app to add music to photos. We can quickly add music to photo in apps for free with the following recommendations.

BeeCut (iOS)

BeeCut is the app to add music to photo. You can add a single image or multiple images using this app. Download this app on the App Store. This app allows you to not just add music to photo but also cut, crop, and rotate the images. You can add transitions and effects to make entertaining content.

Enrich your storytelling with popular video aspect ratios on the market. After you’re happy with the editing, simply download the file as 1080p or in HD. The downloaded file will not have any watermarks and you won’t even have to pay a fee for the output.

Photo Video Maker With Music (Android)

Photo Video Maker With Music is an app on android available through the Play Store. It’s the kind of software that can add music to photo app for android. If you’re looking for the perfect add music to photo app download, this is the one to go for. It helps you create a video with just images and music.

It can function as a slideshow and video-maker. It uses high-quality downloads and smoother transitions to make the experience better. You can add as many photos and videos as you like in any sequence. You can also upload songs from your device or online. You can even add music to video from google photos.

To the online photo add music of your choice. Add music to one photo in app or many photos, at your convenience. If you’re looking for the perfect ‘add music to photo’ app download then this is the music for you.

Part 4 How About Adding Music To Photo Online [Pros & Cons]

If you don’t want to bother with the hassle of downloading software that can help. Then you can use these online websites for a fast, easy and convenient way to create magic.

InVideo

InVideo is an easy and stunning way to add music to photo. This online platform can provide customizable templates that let your creativity shine. It can even create particular templates for different social media platforms like Facebook, YouTube, Instagram, and more.

Thanks to the user-friendly nature, you can add transformative elements to the images to hone their shine. It offers an inbuilt library with millions of stock footage, images, and royalty-free music.

You can also add incredible effects, light features, and other kinds of cool effects. Even if you don’t know how to add music to a gif in photoshop, you can do it easily here.

Animoto

Animoto provides slideshow content that is a great way to promote your adventures, establish a business, and keep and convey memorable moments. Animoto’s slideshow creator is simple to get and master.

To convey your narrative, easily import your images and video clips into this online slideshow builder, then add text and audio. Once you’ve finished your video, feel free to share it with family and friends.

You can benefit from the customized templates available. It offers thematic templates as well. This makes creating the video that much sweeter.

The output formats are all HD. You can achieve crystalline clarity with this online tool.

Pros

Convenient

Expedites the editing process

Offers an opportunity to explore cool effects on images

Allows you to pick personal or Royalty-free music

Free service

Cons

Time-consuming

Some can support only one soundtrack or only one image.

It can be slow and laborious with slow internet speed

If you want to ensure the content you create is not limited by the number of photos or duration, you can choose Wondershare Filmora.

With Filmora, you are not limited in either the length of the video, the quality of audio, or the sequence. It can help polish your creation with better image quality enhancements, effects that are transformative.

It can improve your efficiency, helping you create your video quickly. This makes your photos more interesting and emotionally fulfilling.

With many of these software, incorporating music is as simple as dragging a recording onto a timeline. You can use any of these software to add music to photo. You can easily upload audio to a photo if you grasp enough to use a smartphone. Picking music that will compliment your idea is the tricky aspect.

Quality is the foundation of art, and the only way to properly enhance your art is to practice. Don’t be scared to take images of such things that most people overlook. Utilize things through music that most people aren’t aware of to help your work thrive!

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Try It Free Try It Free

If you have a special occasion coming up, then the best way to make it better is to add music to photo. If you’re wondering how to add music to photo then we have a collection of free websites and apps to add music to the photos of your choice.

We are going to take you on a journey to capture the magic of special moments and make them better. Read on to learn about the best apps to add music to photo, websites providing this service for free. You can choose to add music to one photo or multiples.

In this article

01 [Before Adding Music To Photo, What Do You Need To Prepare?](#Part 1)

02 [Add Music To Photo On Pc](#Part 2)

03 [App To Add Music In Photo ](#Part 3)

04 [How About Adding Music To Photo Online [Pros & Cons]](#Part 4)

Part 1 Before Adding Music To Photo, What Do You Need To Prepare?

This is the golden question you need to ask yourself before you dive into creating the perfect musical image. What does the occasion stand for? What values are you hoping to showcase? What moments make you cherish the bonds between you and the recipient? What sets them apart from the rest?

These are all worthwhile questions to ask before you start compiling your photos. Find the photos that commemorate the best parts of the relationship. Find images that highlight that. Now, let’s look at how to add music in photo.

Part 2 Add Music To Photo On Pc

There are many ways to add music to photo on your PC. You can learn how to add music on photos online and offline. The internet offers several websites where you can browse online and add music to photo.

2.1 For Win & Mac

When you’re trying to learn how to add music with photo, you’re going to need a video editor. If you want to turn your fondest memories into a stunning slideshow or a thoughtful video, then this software is the solution for you.

● Wondershare Filmora

Wondershare Filmora is a brand new way to conduct video editing. This helps if you’re just starting out and wondering ‘how do I add music to a photo?’. This also works if you’re a professional If you’re looking for the best video editor online for free to add music to photo? Then wonder no more, because you can use Wondershare Filmora today! It can be downloaded online and can be used on your desktop or MacBook.

There are two ways to save time and increase your efficiency. Let’s get the ball rolling with these two ways.

Firstly, you can simply import the photos. It doesn’t matter if you have one photo or many. You can simply add them to the Wondershare Filmora timeline using the “Import” function on the ‘Media’ tab.

Follow this up by adding the music to the timeline. You can edit the duration of each video, the music clip that plays when this image is on the screen. It lets you edit your music clip to fit the photos. Export the resultant clip in your preferred format.

2.2 Only For Mac

Mac users need never fear, we’ve got you covered on how to add music in a photo.

● iMovie

iMovie software is the classic way to enhance your storytelling skills through the cinematic enhancements offered. It’s a way to enhance photos, add music to video. iMovie can easily help you learn how to add music to one photo or many. You can edit the images with some special effects for each image. Simply export the video when you’re done.

It also comes in app form.

● Wondershare Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Secondly, you can use Wondershare Filmora on your macOS. One of the better video editing tools out there.

It is well suited for both beginners and those working in the industry. It’s well regarded by both.

You can add music to photos free if you download the free version of the software. You can choose to import audio from your personal files. Another option is to use audio from the royalty-free library available on Filmora.

It lets you drag and drop each image to import the file. You can also apply individual effects to the images when you’re editing. The best part? You can use a green screen to create a picture-in-picture effect.

As a bonus, you can also use some effect or animation to make the photo interesting, With the editing option, you can rotate the image, crop, or flip the image vertically. As for the animation, you can use keyframing to create incredible animations on Filmora.

Part 3 App To Add Music In Photo

Our phones are an indispensable part of our lives. We can use them to find a free app to add music to photos. We can quickly add music to photo in apps for free with the following recommendations.

BeeCut (iOS)

BeeCut is the app to add music to photo. You can add a single image or multiple images using this app. Download this app on the App Store. This app allows you to not just add music to photo but also cut, crop, and rotate the images. You can add transitions and effects to make entertaining content.

Enrich your storytelling with popular video aspect ratios on the market. After you’re happy with the editing, simply download the file as 1080p or in HD. The downloaded file will not have any watermarks and you won’t even have to pay a fee for the output.

Photo Video Maker With Music (Android)

Photo Video Maker With Music is an app on android available through the Play Store. It’s the kind of software that can add music to photo app for android. If you’re looking for the perfect add music to photo app download, this is the one to go for. It helps you create a video with just images and music.

It can function as a slideshow and video-maker. It uses high-quality downloads and smoother transitions to make the experience better. You can add as many photos and videos as you like in any sequence. You can also upload songs from your device or online. You can even add music to video from google photos.

To the online photo add music of your choice. Add music to one photo in app or many photos, at your convenience. If you’re looking for the perfect ‘add music to photo’ app download then this is the music for you.

Part 4 How About Adding Music To Photo Online [Pros & Cons]

If you don’t want to bother with the hassle of downloading software that can help. Then you can use these online websites for a fast, easy and convenient way to create magic.

InVideo

InVideo is an easy and stunning way to add music to photo. This online platform can provide customizable templates that let your creativity shine. It can even create particular templates for different social media platforms like Facebook, YouTube, Instagram, and more.

Thanks to the user-friendly nature, you can add transformative elements to the images to hone their shine. It offers an inbuilt library with millions of stock footage, images, and royalty-free music.

You can also add incredible effects, light features, and other kinds of cool effects. Even if you don’t know how to add music to a gif in photoshop, you can do it easily here.

Animoto

Animoto provides slideshow content that is a great way to promote your adventures, establish a business, and keep and convey memorable moments. Animoto’s slideshow creator is simple to get and master.

To convey your narrative, easily import your images and video clips into this online slideshow builder, then add text and audio. Once you’ve finished your video, feel free to share it with family and friends.

You can benefit from the customized templates available. It offers thematic templates as well. This makes creating the video that much sweeter.

The output formats are all HD. You can achieve crystalline clarity with this online tool.

Pros

Convenient

Expedites the editing process

Offers an opportunity to explore cool effects on images

Allows you to pick personal or Royalty-free music

Free service

Cons

Time-consuming

Some can support only one soundtrack or only one image.

It can be slow and laborious with slow internet speed

If you want to ensure the content you create is not limited by the number of photos or duration, you can choose Wondershare Filmora.

With Filmora, you are not limited in either the length of the video, the quality of audio, or the sequence. It can help polish your creation with better image quality enhancements, effects that are transformative.

It can improve your efficiency, helping you create your video quickly. This makes your photos more interesting and emotionally fulfilling.

With many of these software, incorporating music is as simple as dragging a recording onto a timeline. You can use any of these software to add music to photo. You can easily upload audio to a photo if you grasp enough to use a smartphone. Picking music that will compliment your idea is the tricky aspect.

Quality is the foundation of art, and the only way to properly enhance your art is to practice. Don’t be scared to take images of such things that most people overlook. Utilize things through music that most people aren’t aware of to help your work thrive!

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Try It Free Try It Free

If you have a special occasion coming up, then the best way to make it better is to add music to photo. If you’re wondering how to add music to photo then we have a collection of free websites and apps to add music to the photos of your choice.

We are going to take you on a journey to capture the magic of special moments and make them better. Read on to learn about the best apps to add music to photo, websites providing this service for free. You can choose to add music to one photo or multiples.

In this article

01 [Before Adding Music To Photo, What Do You Need To Prepare?](#Part 1)

02 [Add Music To Photo On Pc](#Part 2)

03 [App To Add Music In Photo ](#Part 3)

04 [How About Adding Music To Photo Online [Pros & Cons]](#Part 4)

Part 1 Before Adding Music To Photo, What Do You Need To Prepare?

This is the golden question you need to ask yourself before you dive into creating the perfect musical image. What does the occasion stand for? What values are you hoping to showcase? What moments make you cherish the bonds between you and the recipient? What sets them apart from the rest?

These are all worthwhile questions to ask before you start compiling your photos. Find the photos that commemorate the best parts of the relationship. Find images that highlight that. Now, let’s look at how to add music in photo.

Part 2 Add Music To Photo On Pc

There are many ways to add music to photo on your PC. You can learn how to add music on photos online and offline. The internet offers several websites where you can browse online and add music to photo.

2.1 For Win & Mac

When you’re trying to learn how to add music with photo, you’re going to need a video editor. If you want to turn your fondest memories into a stunning slideshow or a thoughtful video, then this software is the solution for you.

● Wondershare Filmora

Wondershare Filmora is a brand new way to conduct video editing. This helps if you’re just starting out and wondering ‘how do I add music to a photo?’. This also works if you’re a professional If you’re looking for the best video editor online for free to add music to photo? Then wonder no more, because you can use Wondershare Filmora today! It can be downloaded online and can be used on your desktop or MacBook.

There are two ways to save time and increase your efficiency. Let’s get the ball rolling with these two ways.

Firstly, you can simply import the photos. It doesn’t matter if you have one photo or many. You can simply add them to the Wondershare Filmora timeline using the “Import” function on the ‘Media’ tab.

Follow this up by adding the music to the timeline. You can edit the duration of each video, the music clip that plays when this image is on the screen. It lets you edit your music clip to fit the photos. Export the resultant clip in your preferred format.

2.2 Only For Mac

Mac users need never fear, we’ve got you covered on how to add music in a photo.

● iMovie

iMovie software is the classic way to enhance your storytelling skills through the cinematic enhancements offered. It’s a way to enhance photos, add music to video. iMovie can easily help you learn how to add music to one photo or many. You can edit the images with some special effects for each image. Simply export the video when you’re done.

It also comes in app form.

● Wondershare Filmora

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Secondly, you can use Wondershare Filmora on your macOS. One of the better video editing tools out there.

It is well suited for both beginners and those working in the industry. It’s well regarded by both.

You can add music to photos free if you download the free version of the software. You can choose to import audio from your personal files. Another option is to use audio from the royalty-free library available on Filmora.

It lets you drag and drop each image to import the file. You can also apply individual effects to the images when you’re editing. The best part? You can use a green screen to create a picture-in-picture effect.

As a bonus, you can also use some effect or animation to make the photo interesting, With the editing option, you can rotate the image, crop, or flip the image vertically. As for the animation, you can use keyframing to create incredible animations on Filmora.

Part 3 App To Add Music In Photo

Our phones are an indispensable part of our lives. We can use them to find a free app to add music to photos. We can quickly add music to photo in apps for free with the following recommendations.

BeeCut (iOS)

BeeCut is the app to add music to photo. You can add a single image or multiple images using this app. Download this app on the App Store. This app allows you to not just add music to photo but also cut, crop, and rotate the images. You can add transitions and effects to make entertaining content.

Enrich your storytelling with popular video aspect ratios on the market. After you’re happy with the editing, simply download the file as 1080p or in HD. The downloaded file will not have any watermarks and you won’t even have to pay a fee for the output.

Photo Video Maker With Music (Android)

Photo Video Maker With Music is an app on android available through the Play Store. It’s the kind of software that can add music to photo app for android. If you’re looking for the perfect add music to photo app download, this is the one to go for. It helps you create a video with just images and music.

It can function as a slideshow and video-maker. It uses high-quality downloads and smoother transitions to make the experience better. You can add as many photos and videos as you like in any sequence. You can also upload songs from your device or online. You can even add music to video from google photos.

To the online photo add music of your choice. Add music to one photo in app or many photos, at your convenience. If you’re looking for the perfect ‘add music to photo’ app download then this is the music for you.

Part 4 How About Adding Music To Photo Online [Pros & Cons]

If you don’t want to bother with the hassle of downloading software that can help. Then you can use these online websites for a fast, easy and convenient way to create magic.

InVideo

InVideo is an easy and stunning way to add music to photo. This online platform can provide customizable templates that let your creativity shine. It can even create particular templates for different social media platforms like Facebook, YouTube, Instagram, and more.

Thanks to the user-friendly nature, you can add transformative elements to the images to hone their shine. It offers an inbuilt library with millions of stock footage, images, and royalty-free music.

You can also add incredible effects, light features, and other kinds of cool effects. Even if you don’t know how to add music to a gif in photoshop, you can do it easily here.

Animoto

Animoto provides slideshow content that is a great way to promote your adventures, establish a business, and keep and convey memorable moments. Animoto’s slideshow creator is simple to get and master.

To convey your narrative, easily import your images and video clips into this online slideshow builder, then add text and audio. Once you’ve finished your video, feel free to share it with family and friends.

You can benefit from the customized templates available. It offers thematic templates as well. This makes creating the video that much sweeter.

The output formats are all HD. You can achieve crystalline clarity with this online tool.

Pros

Convenient

Expedites the editing process

Offers an opportunity to explore cool effects on images

Allows you to pick personal or Royalty-free music

Free service

Cons

Time-consuming

Some can support only one soundtrack or only one image.

It can be slow and laborious with slow internet speed

If you want to ensure the content you create is not limited by the number of photos or duration, you can choose Wondershare Filmora.

With Filmora, you are not limited in either the length of the video, the quality of audio, or the sequence. It can help polish your creation with better image quality enhancements, effects that are transformative.

It can improve your efficiency, helping you create your video quickly. This makes your photos more interesting and emotionally fulfilling.

With many of these software, incorporating music is as simple as dragging a recording onto a timeline. You can use any of these software to add music to photo. You can easily upload audio to a photo if you grasp enough to use a smartphone. Picking music that will compliment your idea is the tricky aspect.

Quality is the foundation of art, and the only way to properly enhance your art is to practice. Don’t be scared to take images of such things that most people overlook. Utilize things through music that most people aren’t aware of to help your work thrive!

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Also read: