Enhancing Listening Experience: Steps for Standardizing Audio Amplitude in VLC

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Where Can I Find MP3 Cat Sound Effect?

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

You have created a video with amazing transitions, titles, slides etc. but, the action in the video still missing? If yes, then you need to focus on the sound effects. MP3 cat sound effects are best to make your video more effective and attractive as well.

Audio is vital as it connects audiences. Further, the audio raises the entertainment value, elicits emotions, and set the mood. When used correctly, dialogue, audio effects, music, or even silence can drastically improve your movie.

An excellent audio effect can make or break your video. There can also be challenges to finding good sources for sound effects. There are many websites offering royalty-free sound effects which can be easily downloaded.

Let’s look at where you can find cat sound effects in the mp3 format.

Part 1 Websites That Offer Free Sound Effects

Several websites provide free cat sound effects which can be downloaded quickly. Each website has a diverse range of genres, styles, and sounds to choose from.

There are two ways you can go about this. One is by using free sound effects and the other using paid software. Remember, the type of licensure limits free sound effects.

Here are a few options for getting free cat sound effects:

Adobe Audition Sound Effects

Sound effects in Adobe Audition add sophisticated richness to your audio compositions. You can choose from numerous free cat sound effects for everything where soundtracks are essential.

It allows you to add new sounds, emotions, and a dash of humor to your projects. Like adding a cat sound effect to your video!

FreeSound

This website is a database of over 400,000 sound effects available for free download. With an old school website and easy navigation layout.

Remember, not all their sound effects can be used commercially. A few nonscript names, making it challenging to find the right sound.

SoundBible

It is an easy-to-use program for sound effects. You can begin downloading the royalty-free audio effect clips users see as soon as it arrives at the site’s top page. Every clip’s license is prominently illustrated next to it, and there are thousands of them.

You can request a sound from the community if you can’t locate it on SoundBible, a fantastic feature. The only criticism is that browsing for audio is a little cumbersome, and the site design needs a little patience for navigating.

Aside from that, this is a fantastic site, and the community that promotes it deserves recognition.

YouTube

It offers creators an audio library for cat sound effects and other effects too. They are available at the Creator Studio. Once you enter the creator studio, select “Other Features” to find the audio library.

You can find many royalty-free sound effects and music. The sound effects tab allows users to sort by “most popular” and featured music.

Alternatively, you can filter using “Category” and sort through to find the cat sound effects.

Let’s look at a few options to create the cat sound effects!

Option 1: YouTube

You can download a Cat Sound Effect from the YouTube search bar. In order to download the video, you can copy the link and use a YouTube specific video downloading website online.

This website allows users to select the format of the output file. With this, it has never been easier to download videos for either personal views or to convert to audio.

It’s easy to convert a video to an audio file. There are online websites that allow users to convert cat sound effect videos into an mp3 file.

Another way to level up the audio file’s quality is by choosing the highest bitrate. Bitrates from audio can be anywhere from 96 bitrates to 320 bitrates.

Convert the file with a higher bitrate for better quality. Then embed the audio for its intended use.

Option 2: Wondershare Filmora

A slightly more accessible option is to use Wondershare’s Filmora, a video editor with powerful and versatile options to create videos like cinematic masterpieces.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Thanks to intuitive user design, it’s beginner-friendly and allows a sleek finish to videos that make it look professional.

The audio library has varied audio assets available for easy embed when editing with Filmora’s video editing tool. This can even be done with minimal effort from the user.

Filmora’s Royalty-Free sound effects can even be used independently of the software. Just download the sound effects needed, like a cat mp3 sound effect, and use it in your video.

One pro when using Filmora is adding an audio track to a video clip. You can add another audio track at the end and keep overlaying.

This allows audio clips to be used in sync and creates rich aural cues that amp up the entertainment value of your video.

Thanks to the timeline feature in the Filmora studio, you can easily add audio at any insertion point. The audio tracks on the Filmora timeline display audio waveforms.

Filmora also allows users to add their audio files. The music library is sorted into categories and allows searching by title.

The audio mixer can help users adjust the volume of the file when embedded in a video. You can change the audio waveform on the timeline to modify the audio.

Filmora has options to remove any ambient background noise.

Filmora’s Auto Normalization and Silence Detection can help you compose the audio makeup of your video and adjust it accordingly. As a bonus, Filmora’s audio effects have a microphone tool adjacent to the video preview area, making it easy to do voice-overs.

Wondershare Filmora is one of the highest audio and video editing software programs, thanks to its exceptional capabilities and interface.

If you want to produce excellent audio tracks for your film, you should download and install on your computer and take advantage of access to its stunning editing capabilities.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

If you want to add MP3 cat sound effects, then you can take help from the above - mentioned tools. Wondershare Filmora is best to choose various sound effects for your videos. Try it now Try It Free

You have created a video with amazing transitions, titles, slides etc. but, the action in the video still missing? If yes, then you need to focus on the sound effects. MP3 cat sound effects are best to make your video more effective and attractive as well.

Audio is vital as it connects audiences. Further, the audio raises the entertainment value, elicits emotions, and set the mood. When used correctly, dialogue, audio effects, music, or even silence can drastically improve your movie.

An excellent audio effect can make or break your video. There can also be challenges to finding good sources for sound effects. There are many websites offering royalty-free sound effects which can be easily downloaded.

Let’s look at where you can find cat sound effects in the mp3 format.

Part 1 Websites That Offer Free Sound Effects

Several websites provide free cat sound effects which can be downloaded quickly. Each website has a diverse range of genres, styles, and sounds to choose from.

There are two ways you can go about this. One is by using free sound effects and the other using paid software. Remember, the type of licensure limits free sound effects.

Here are a few options for getting free cat sound effects:

Adobe Audition Sound Effects

Sound effects in Adobe Audition add sophisticated richness to your audio compositions. You can choose from numerous free cat sound effects for everything where soundtracks are essential.

It allows you to add new sounds, emotions, and a dash of humor to your projects. Like adding a cat sound effect to your video!

FreeSound

This website is a database of over 400,000 sound effects available for free download. With an old school website and easy navigation layout.

Remember, not all their sound effects can be used commercially. A few nonscript names, making it challenging to find the right sound.

SoundBible

It is an easy-to-use program for sound effects. You can begin downloading the royalty-free audio effect clips users see as soon as it arrives at the site’s top page. Every clip’s license is prominently illustrated next to it, and there are thousands of them.

You can request a sound from the community if you can’t locate it on SoundBible, a fantastic feature. The only criticism is that browsing for audio is a little cumbersome, and the site design needs a little patience for navigating.

Aside from that, this is a fantastic site, and the community that promotes it deserves recognition.

YouTube

It offers creators an audio library for cat sound effects and other effects too. They are available at the Creator Studio. Once you enter the creator studio, select “Other Features” to find the audio library.

You can find many royalty-free sound effects and music. The sound effects tab allows users to sort by “most popular” and featured music.

Alternatively, you can filter using “Category” and sort through to find the cat sound effects.

Let’s look at a few options to create the cat sound effects!

Option 1: YouTube

You can download a Cat Sound Effect from the YouTube search bar. In order to download the video, you can copy the link and use a YouTube specific video downloading website online.

This website allows users to select the format of the output file. With this, it has never been easier to download videos for either personal views or to convert to audio.

It’s easy to convert a video to an audio file. There are online websites that allow users to convert cat sound effect videos into an mp3 file.

Another way to level up the audio file’s quality is by choosing the highest bitrate. Bitrates from audio can be anywhere from 96 bitrates to 320 bitrates.

Convert the file with a higher bitrate for better quality. Then embed the audio for its intended use.

Option 2: Wondershare Filmora

A slightly more accessible option is to use Wondershare’s Filmora, a video editor with powerful and versatile options to create videos like cinematic masterpieces.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Thanks to intuitive user design, it’s beginner-friendly and allows a sleek finish to videos that make it look professional.

The audio library has varied audio assets available for easy embed when editing with Filmora’s video editing tool. This can even be done with minimal effort from the user.

Filmora’s Royalty-Free sound effects can even be used independently of the software. Just download the sound effects needed, like a cat mp3 sound effect, and use it in your video.

One pro when using Filmora is adding an audio track to a video clip. You can add another audio track at the end and keep overlaying.

This allows audio clips to be used in sync and creates rich aural cues that amp up the entertainment value of your video.

Thanks to the timeline feature in the Filmora studio, you can easily add audio at any insertion point. The audio tracks on the Filmora timeline display audio waveforms.

Filmora also allows users to add their audio files. The music library is sorted into categories and allows searching by title.

The audio mixer can help users adjust the volume of the file when embedded in a video. You can change the audio waveform on the timeline to modify the audio.

Filmora has options to remove any ambient background noise.

Filmora’s Auto Normalization and Silence Detection can help you compose the audio makeup of your video and adjust it accordingly. As a bonus, Filmora’s audio effects have a microphone tool adjacent to the video preview area, making it easy to do voice-overs.

Wondershare Filmora is one of the highest audio and video editing software programs, thanks to its exceptional capabilities and interface.

If you want to produce excellent audio tracks for your film, you should download and install on your computer and take advantage of access to its stunning editing capabilities.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

If you want to add MP3 cat sound effects, then you can take help from the above - mentioned tools. Wondershare Filmora is best to choose various sound effects for your videos. Try it now Try It Free

You have created a video with amazing transitions, titles, slides etc. but, the action in the video still missing? If yes, then you need to focus on the sound effects. MP3 cat sound effects are best to make your video more effective and attractive as well.

Audio is vital as it connects audiences. Further, the audio raises the entertainment value, elicits emotions, and set the mood. When used correctly, dialogue, audio effects, music, or even silence can drastically improve your movie.

An excellent audio effect can make or break your video. There can also be challenges to finding good sources for sound effects. There are many websites offering royalty-free sound effects which can be easily downloaded.

Let’s look at where you can find cat sound effects in the mp3 format.

Part 1 Websites That Offer Free Sound Effects

Several websites provide free cat sound effects which can be downloaded quickly. Each website has a diverse range of genres, styles, and sounds to choose from.

There are two ways you can go about this. One is by using free sound effects and the other using paid software. Remember, the type of licensure limits free sound effects.

Here are a few options for getting free cat sound effects:

Adobe Audition Sound Effects

Sound effects in Adobe Audition add sophisticated richness to your audio compositions. You can choose from numerous free cat sound effects for everything where soundtracks are essential.

It allows you to add new sounds, emotions, and a dash of humor to your projects. Like adding a cat sound effect to your video!

FreeSound

This website is a database of over 400,000 sound effects available for free download. With an old school website and easy navigation layout.

Remember, not all their sound effects can be used commercially. A few nonscript names, making it challenging to find the right sound.

SoundBible

It is an easy-to-use program for sound effects. You can begin downloading the royalty-free audio effect clips users see as soon as it arrives at the site’s top page. Every clip’s license is prominently illustrated next to it, and there are thousands of them.

You can request a sound from the community if you can’t locate it on SoundBible, a fantastic feature. The only criticism is that browsing for audio is a little cumbersome, and the site design needs a little patience for navigating.

Aside from that, this is a fantastic site, and the community that promotes it deserves recognition.

YouTube

It offers creators an audio library for cat sound effects and other effects too. They are available at the Creator Studio. Once you enter the creator studio, select “Other Features” to find the audio library.

You can find many royalty-free sound effects and music. The sound effects tab allows users to sort by “most popular” and featured music.

Alternatively, you can filter using “Category” and sort through to find the cat sound effects.

Let’s look at a few options to create the cat sound effects!

Option 1: YouTube

You can download a Cat Sound Effect from the YouTube search bar. In order to download the video, you can copy the link and use a YouTube specific video downloading website online.

This website allows users to select the format of the output file. With this, it has never been easier to download videos for either personal views or to convert to audio.

It’s easy to convert a video to an audio file. There are online websites that allow users to convert cat sound effect videos into an mp3 file.

Another way to level up the audio file’s quality is by choosing the highest bitrate. Bitrates from audio can be anywhere from 96 bitrates to 320 bitrates.

Convert the file with a higher bitrate for better quality. Then embed the audio for its intended use.

Option 2: Wondershare Filmora

A slightly more accessible option is to use Wondershare’s Filmora, a video editor with powerful and versatile options to create videos like cinematic masterpieces.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Thanks to intuitive user design, it’s beginner-friendly and allows a sleek finish to videos that make it look professional.

The audio library has varied audio assets available for easy embed when editing with Filmora’s video editing tool. This can even be done with minimal effort from the user.

Filmora’s Royalty-Free sound effects can even be used independently of the software. Just download the sound effects needed, like a cat mp3 sound effect, and use it in your video.

One pro when using Filmora is adding an audio track to a video clip. You can add another audio track at the end and keep overlaying.

This allows audio clips to be used in sync and creates rich aural cues that amp up the entertainment value of your video.

Thanks to the timeline feature in the Filmora studio, you can easily add audio at any insertion point. The audio tracks on the Filmora timeline display audio waveforms.

Filmora also allows users to add their audio files. The music library is sorted into categories and allows searching by title.

The audio mixer can help users adjust the volume of the file when embedded in a video. You can change the audio waveform on the timeline to modify the audio.

Filmora has options to remove any ambient background noise.

Filmora’s Auto Normalization and Silence Detection can help you compose the audio makeup of your video and adjust it accordingly. As a bonus, Filmora’s audio effects have a microphone tool adjacent to the video preview area, making it easy to do voice-overs.

Wondershare Filmora is one of the highest audio and video editing software programs, thanks to its exceptional capabilities and interface.

If you want to produce excellent audio tracks for your film, you should download and install on your computer and take advantage of access to its stunning editing capabilities.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

If you want to add MP3 cat sound effects, then you can take help from the above - mentioned tools. Wondershare Filmora is best to choose various sound effects for your videos. Try it now Try It Free

You have created a video with amazing transitions, titles, slides etc. but, the action in the video still missing? If yes, then you need to focus on the sound effects. MP3 cat sound effects are best to make your video more effective and attractive as well.

Audio is vital as it connects audiences. Further, the audio raises the entertainment value, elicits emotions, and set the mood. When used correctly, dialogue, audio effects, music, or even silence can drastically improve your movie.

An excellent audio effect can make or break your video. There can also be challenges to finding good sources for sound effects. There are many websites offering royalty-free sound effects which can be easily downloaded.

Let’s look at where you can find cat sound effects in the mp3 format.

Part 1 Websites That Offer Free Sound Effects

Several websites provide free cat sound effects which can be downloaded quickly. Each website has a diverse range of genres, styles, and sounds to choose from.

There are two ways you can go about this. One is by using free sound effects and the other using paid software. Remember, the type of licensure limits free sound effects.

Here are a few options for getting free cat sound effects:

Adobe Audition Sound Effects

Sound effects in Adobe Audition add sophisticated richness to your audio compositions. You can choose from numerous free cat sound effects for everything where soundtracks are essential.

It allows you to add new sounds, emotions, and a dash of humor to your projects. Like adding a cat sound effect to your video!

FreeSound

This website is a database of over 400,000 sound effects available for free download. With an old school website and easy navigation layout.

Remember, not all their sound effects can be used commercially. A few nonscript names, making it challenging to find the right sound.

SoundBible

It is an easy-to-use program for sound effects. You can begin downloading the royalty-free audio effect clips users see as soon as it arrives at the site’s top page. Every clip’s license is prominently illustrated next to it, and there are thousands of them.

You can request a sound from the community if you can’t locate it on SoundBible, a fantastic feature. The only criticism is that browsing for audio is a little cumbersome, and the site design needs a little patience for navigating.

Aside from that, this is a fantastic site, and the community that promotes it deserves recognition.

YouTube

It offers creators an audio library for cat sound effects and other effects too. They are available at the Creator Studio. Once you enter the creator studio, select “Other Features” to find the audio library.

You can find many royalty-free sound effects and music. The sound effects tab allows users to sort by “most popular” and featured music.

Alternatively, you can filter using “Category” and sort through to find the cat sound effects.

Let’s look at a few options to create the cat sound effects!

Option 1: YouTube

You can download a Cat Sound Effect from the YouTube search bar. In order to download the video, you can copy the link and use a YouTube specific video downloading website online.

This website allows users to select the format of the output file. With this, it has never been easier to download videos for either personal views or to convert to audio.

It’s easy to convert a video to an audio file. There are online websites that allow users to convert cat sound effect videos into an mp3 file.

Another way to level up the audio file’s quality is by choosing the highest bitrate. Bitrates from audio can be anywhere from 96 bitrates to 320 bitrates.

Convert the file with a higher bitrate for better quality. Then embed the audio for its intended use.

Option 2: Wondershare Filmora

A slightly more accessible option is to use Wondershare’s Filmora, a video editor with powerful and versatile options to create videos like cinematic masterpieces.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Thanks to intuitive user design, it’s beginner-friendly and allows a sleek finish to videos that make it look professional.

The audio library has varied audio assets available for easy embed when editing with Filmora’s video editing tool. This can even be done with minimal effort from the user.

Filmora’s Royalty-Free sound effects can even be used independently of the software. Just download the sound effects needed, like a cat mp3 sound effect, and use it in your video.

One pro when using Filmora is adding an audio track to a video clip. You can add another audio track at the end and keep overlaying.

This allows audio clips to be used in sync and creates rich aural cues that amp up the entertainment value of your video.

Thanks to the timeline feature in the Filmora studio, you can easily add audio at any insertion point. The audio tracks on the Filmora timeline display audio waveforms.

Filmora also allows users to add their audio files. The music library is sorted into categories and allows searching by title.

The audio mixer can help users adjust the volume of the file when embedded in a video. You can change the audio waveform on the timeline to modify the audio.

Filmora has options to remove any ambient background noise.

Filmora’s Auto Normalization and Silence Detection can help you compose the audio makeup of your video and adjust it accordingly. As a bonus, Filmora’s audio effects have a microphone tool adjacent to the video preview area, making it easy to do voice-overs.

Wondershare Filmora is one of the highest audio and video editing software programs, thanks to its exceptional capabilities and interface.

If you want to produce excellent audio tracks for your film, you should download and install on your computer and take advantage of access to its stunning editing capabilities.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

If you want to add MP3 cat sound effects, then you can take help from the above - mentioned tools. Wondershare Filmora is best to choose various sound effects for your videos. Try it now!

Dynamic Duo: How to Automatically Manage Volume Levels Using Audio Ducking in Adobe Premiere Pro for macOS

Tutorial on Audio Ducking in Adobe Premiere Pro on Mac

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: