Elevating Your Podcast Experience with Advanced Audacity Techniques for 2024

Elevating Your Podcast Experience with Advanced Audacity Techniques

Free audio recording & editing software audacity for podcasts is available for Windows, Linux, & macOS. Even though it’s not expressly built for podcasts, it is a popular option for recording podcasts. If you don’t mind a steep learning curve, you can easily record, edit, & export a high-quality podcast with this software.

How to Record a Podcast using Audacity

Despite its complexity, audacity for podcasts doesn’t need a detailed understanding of the software’s internals to begin using it. As a beginner, we explain all of the initial settings and basic editing choices you’ll need to know and how to output in a format that can be used for podcasting.

Here’s how to get started recording your podcast using Audacity for Podcasts:

By selecting the box to the left of your microphone, you may choose your audio host. Select MME for Windows and Core Audio for Mac OS X.

Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

Speak normally into the microphone you’ve placed on your computer.

Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each microphone is assigned a separate audio channel if you have numerous microphones connected to an audio interface or mixer. There must be a separate microphone and channel for each participant on your podcast so that you can edit them separately and make sure they all sound well together.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

To begin recording your podcast, press the red Record button.

When you’ve finished recording your podcast, press the black Stop button.

Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

Audacity for Podcasts not only allows you to record your podcast, but it also allows you to edit it afterward. It is possible to send your raw podcast to the internet as soon as you complete the recording, but editing may add a degree of polish that makes it more pleasurable for the listener.

You may use Audacity to re-arrange your podcast’s flow by cutting and relocating portions, reducing clipping, and even deleting background noise if one of your mics was too near or someone was talking too loudly. Audacity can even alter the levels of individual recordings.

Some of these editing chores are more difficult than others, but if you just have high-quality equipment & have your settings ideal, the podcast may not need a lot of effort. Check over a few different portions of your podcast to get a sense of how much work has to be done on it before publishing.

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

Make your choice of music for the opening, outro, or anything else you’d want to include.

It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

After you’ve finished editing your podcast, listen to it one more time to ensure you’re satisfied with the outcome, then save it to ensure you don’t lose your work if anything goes wrong during the export process. When you export your podcast, you’re creating an audio file that you can publish to your podcast host and share with others.

Here’s how to export the Audacity podcast:

Select File > Export > Export as… from the File menu.
After giving your podcast a name, click Save.
If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

For recording, editing, & mixing your own podcast, an Audacity is a great option. And, like many podcasters, you could discover it meets your long-term requirements. With regard to voice effects, we talk about how people may use Filmora to modify and improve their voices. Filmora has the ability to re-speak video and audio, as well as previously recorded voiceovers. Video, audio, and voiceover files may all benefit from the Timeline’s Pitch feature. Change the tonality of a video or recording to give it a unique sound. It’s easy to replace the voices in the videos using Filmora. A video or narrative should accompany your viral in order for it to be effective. Changing Pitch allows you to alter the pitch of your voice. You may modify the pace of the video to alter the voice (Optional). Make a backup copy of the altered media.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

Speak normally into the microphone you’ve placed on your computer.

Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

To begin recording your podcast, press the red Record button.

When you’ve finished recording your podcast, press the black Stop button.

Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

Make your choice of music for the opening, outro, or anything else you’d want to include.

It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

Here’s how to export the Audacity podcast:

Select File > Export > Export as… from the File menu.
After giving your podcast a name, click Save.
If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

Speak normally into the microphone you’ve placed on your computer.

Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

To begin recording your podcast, press the red Record button.

When you’ve finished recording your podcast, press the black Stop button.

Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

Make your choice of music for the opening, outro, or anything else you’d want to include.

It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

Here’s how to export the Audacity podcast:

Select File > Export > Export as… from the File menu.
After giving your podcast a name, click Save.
If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

Speak normally into the microphone you’ve placed on your computer.

Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

To begin recording your podcast, press the red Record button.

When you’ve finished recording your podcast, press the black Stop button.

Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

Make your choice of music for the opening, outro, or anything else you’d want to include.

It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

Here’s how to export the Audacity podcast:

Select File > Export > Export as… from the File menu.
After giving your podcast a name, click Save.
If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

The Pathway to Pristine Data: Utilizing AI for Improved Audio Quality

How to DeNoise AI

There have often been times when we took some photo or video with our mobile phones or digital cameras, but we found out later that the clip contained hiss, some compression or particles. Everyone, especially in this digital world, is trying to make their content as clean as possible, without impurities, for the audiences to watch, enjoy, and stay with the creators. So, you might find it really uncomfortable when you are in this kind of situation. But what you can do, is doable – you can depend on a video denoise software!

There are a lot of online or offline tools you could use to do that, and we have discussed a lot of them on our web-site, and now, we will review yet another way to achieve your desired result when it comes to noise and grain. So, in today’s article, we will touch upon how to AI DeNoise your image!

The case with this intelligent noise reduction for 2022 is that noise reduction software has been the same for over a decade. This is when DeNoise AI comes to play, because its approach is something new – it uses deep learning. The process is lengthy and focuses on learning millions of images, thus let DeNoise AI to accurately distinguish between real image detail and noise. This is so important because with this new technique, now it is possible to denoise images while actually recovering important detail, something that was impossible a few years ago.

Topaz DeNoise AI has a very simple and intuitive interface with different noise removal options. Anyway, using it in the most effective way would require some knowledge. Oh, and, it would be a headache if you have a slow computer!..

So, as mentioned, traditional noise reduction software most of the time reduces the original detail in the images, but DeNoise AI’s noise reduction eliminates noise, meanwhile, preserves the detail and even enhances it. The new update of Topaz DeNoise AI offers different advanced DeNoise AI Models that can be integrated perfectly into your workflow; you can use it as a standalone piece of software or as a plugin for Adobe Photoshop or Lightroom.

How to AI DeNoise a file

Let’s just suppose you don’t have the software. So, download and install Topaz DeNoise AI. Go to Topaz Labs and select your operating system: Windows or Macintosh OS. Then, install the program.

Once the installation is finished, you will be able to see the Topaz DeNoise AI icon among your applications. Topaz DeNoise AI plugins for Lightroom or Photoshop would also be added there automatically, without any further intervention. But, if that is not the case, it’s ok to add them manually.

The first time you open Topaz DeNoise AI, you can either log in with your Topaz Labs account or try the Denoise AI 30-day free trial.

So, let’s discover how to use DeNoise AI in its different versions!

First, how to remove digital noise with DeNoise AI: DeNoise AI supports most of the commonly used photography files like raw files, dng, tiff, jpegs, etc. So, open the program, drag or open your image and select the best AI model.

In the upper right corner, you will find a toolbar with these options:

Preview Options:

To change the view mode of the photo you’re working with, you can select:

Original (original photo preview)
Single (denoised photo preview).
Split (Original and denoised photo preview with a split slider)
Side by Side ( Original and denoised photo preview)
Comparison ( Compare how the different Ai Models work in your photos at the same time).

Zoom

Zoom in on your images to accurately check the process’s progress.

Denoise AI full review and tutorial

On the right side, you’ll find:

A navigator with the selected zoom box.
A list with the following DeNoise AI Models:
Standard: Broadly developed noise reduction that maintains detail.
Clear: Best for photos with smooth and rounded surfaces such as skin, rocks, water, etc.
Low light: Best for low-light conditions and heavy noise
Severe noise: Best for extremely noisy photos
Raw: The newest AI model in DeNoise. It provides excellent noise reduction, preserving detail, and authentic color starting from a RAW file.
Main Settings. The Auto mode works great in most situations. However, it can be pretty aggressive and give your photos a washed-out look. With Manual Mode, you can set the adjustments according to your taste.
The Post-processing sliders help reduce any color noise remaining in your photos and preserve original detail.
Save Image: To set your output settings before saving your images.

Then, adjust the setting sliders (you can just select Auto mode here); now, apply the adjustments locally, if necessary, using the mask tool; and, save the file with the output settings selected.

Second, let’ts move to DeNoise AI workflow.

If you are trying to find the simplest way to start with DeNoise Ai, it’s better to use the suggested mode, - Light bulb icon! This will automatically select an AI model, and will do so based oon your image. Anyway, in order to remove digital noise there, it’s the best to use the updated comparison view. The reason is obvious – you can take a look right away and compare varied AI models, or the same ones with some different settings to your liking.

So, how to do just that? Well, select the AI model and fine-tune the adjustment using the following settings:

Remove Noise: This slider is wonderful!. It removes the noise in your photo, but doesn’t kind of wash out the images. Values between 10-50 are the best in most cases.
Enhance Sharpness: It sharpens and recovers the detail in images that may become a bit blurry after denoising. It would be excessive if you set the values over 30, in case you would like to avoid odd textures.

After that, you can refine your results with these DeNoise AI Post-processing adjustments:

Recover Original Detail: It helps recover some detail that has been washed out after the noise reduction and adds a bit of grain to keep the image natural. 20-40 points is more than enough.
Color Noise Reduction: This is a powerful tool that reduces any color noise remaining in your images. Zoom in on a dark area and adjust the slider until the color noise disappears and you are happy with the result!

And, the last topic to discuss is DeNoise AI Masking Tool! The software includes a very simple Mask tool in case you want to denoise the image only in certain areas and not in others. So, the key here is that DeNoise AI will apply your adjustments only to the areas that you paint in red.

You need to ckeck the Overlay tool to see the red color while painting. When you are satisfied with the areas you panted, After painting over these areas, you will see a preview of your mask in black and white. Here, white shows the adjustments while black hides them. Following this, DeNoise AI will just be applied to the areas painted in white.

And, the masking settings are:

Add/Subtract: to paint in white or black and reveal or hide your adjustments.
Size: to change the size of your brush.
Softness: to change the hardness of your brush. Being 0 is the hardest and 100 the softest.
Opacity: to vary the opacity of the mask to add precise local adjustments.
Mask options: to clear or invert your mask.
Overlay: to show in red these areas where you are painting.

Once you finish creating your mask, just click on the “apply mask” button, and there you go!

Wondershare Filmora X

Even though we discussed in so much detail how to DeNoise AI our images, it’s important to keep in mind that even videos need denoising. So, we decided to keep you informed about how to do that, as well. Wondershare Filmora X is something that can help us with that – it can change our damaged scene into something more acceptable. And in order to do so, first, you need to go to the Effects panel and type: “Smart Denoise”, then, right-click on the video and choose Edit Properties.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

With this, you will see the Smart Denoise, where you are able to change opacity of the clip, threshold and radius.

You can now reduce Opacity until you are satisfied with the result. The box next to Smart Denoise will show you the scene before and after the effect.

Of course, it is much easier than DeNoise AI looks and works, and it’s worth the try – will take so much less minutes!

Bonus tip: Wondershare Filmora audio denoise

We already explained how video image and video denoising work, but, denoising not only means digital noise on the screen, of course. It can be literally a noise! The sound which is not so pleasant to listen to… Audio background denoising is to remove unwanted hum from the audio in order for it to become more hearable. So, doing this in Wondershare Filmora works in a quite easy way. Use the guideline:

Drag and drop your video into the timeline. Right-click on the clip and hit Detach Audio, which will let you separate audio and video from one another and make sure you can work on them one by one.

Double-click on the audio track and have access to the editing panel, where you can see Remove background noise – it is not needed to emphasize what this option does for you!

Keep in mind that there is a second way to achieve the same result as well, but this in case you don’t want to detach the audio: Double-click on the video clip in the timeline, the editing panel opens, so switch to Audio. Checking the box next to Remove background noise will show that there are three levels – weak, mid, and strong, and of course, you can choose to your liking!

If the voice recording doesn’t sound natural anymore, you can do the following: Click on Customize and Customize Equalizer window will open.

On the left, you can see the low tunes, while the highs are on the right. Background noises are often on the left, so you can lower them to get rid of them, but in order to have a more natural sound, raise the middle ones a little – and you are done when you are content with the sound!

So, in this article, you learned about different noises, and about different tools and programs to denoise your images, videos, and audios! Pretty enlightening, ha? Let’s hope this is something you are looking for, and will put to good use very, very soon!

Free Download For macOS 10.14 or later

With this, you will see the Smart Denoise, where you are able to change opacity of the clip, threshold and radius.

You can now reduce Opacity until you are satisfied with the result. The box next to Smart Denoise will show you the scene before and after the effect.

Of course, it is much easier than DeNoise AI looks and works, and it’s worth the try – will take so much less minutes!

Bonus tip: Wondershare Filmora audio denoise

Drag and drop your video into the timeline. Right-click on the clip and hit Detach Audio, which will let you separate audio and video from one another and make sure you can work on them one by one.

Double-click on the audio track and have access to the editing panel, where you can see Remove background noise – it is not needed to emphasize what this option does for you!

If the voice recording doesn’t sound natural anymore, you can do the following: Click on Customize and Customize Equalizer window will open.

5 Amazing Voice Changer for Google Meet

Voice Changers are devices or software that are programmed in such a way that they change the tone, pitch, and format of your voice. You can sound different with voice changers. Do you know that you can use voice changers for Google meet?

Google Meet is widely used for online group calls. How exciting will it be if you speak with an unrecognizable voice on Google Meet? Let us talk a little about Google Meet Voice Changers so that you can have fun.

1. AV Voice Changer

Altering and changing your voice on Google Meet is fun with AV Voice Changer. With this software, you can sound younger, older, deeper, and more. AV Voice Changer can be easily accessed, and you can easily modify your voice. An amazing thing about this voice changer is converting files in batches. With this software, you can have more fun in less time and with less action.

Key Features

The software allows you to cut and mix, morph and record. Not only this, but you can also modify your voice or other audio files.
AV Voice Changer is compatible with different messaging services. For instance, Google, Yahoo, Zoom, Skype, and others.
The voice changer has a variety of sound effects to offer you. Moreover, it is very efficient as it can process all the selected files at once.

2. Voxal Voice Changer

When it comes to changing your voice, Voxal Voice Changer is famous software. This voice changer is the best for Google Meet. This program is ideal for changing and altering your voice in music, games, and other platforms. The voice changer has a simple interface that even beginners can understand everything.

The software is available for both Windows and Mac, 32-bit and 64-bit. You can use Voxal Voice changer for free, but for professional settings, its commercial license can be purchased.

Key Features

The software is compatible with all existing games and applications such as CSGO, Rainbow Six Siege, and Skype. Moreover, the software works well with Google Meet.
The fascinating thing about Voxal Voice Changer is that it uses less CPU space. Interestingly, no specific hardware is required.
It allows you to create custom voice effects and evens voice for any characters in audiobooks.

3. MorphVOX Pro

MorphVOX Pro is a voice modifier that works perfectly with Google Meet and online calls. With this software, you can improve your communication experience. It has various sound effects that modify and alter your voice.

The voice changer has amazing audio features with which you can customize your voice and the way it sounds. This Google meet voice changer can transform your voice to sound like male or female.

Key Features

The voice changer is amazing as it has high-quality voice-changing features. It also has sound effects and built-in voices.
With MorphVOX Pro, you can customize features of the joystick, hotkey shortcuts as well as mouse buttons.
The voice-changing software can easily be integrated with different online games and chat programs. Moreover, it is compatible with both Mac and Windows.

4. Clownfish Voice Changer for Chrome

The best voice changer for Google Meet is Clownfish for Chrome. This is a Chrome Extension to alter and modify your voice. The voice changer was created for any call session that takes place on chrome tabs. This is why Clownfish for Chrome is perfect for Google Meet.

Any web application that uses a microphone or audio can use Clownfish for Chrome. The web versions of Teams, Skype, Discord, etc., can work with this voice changer.

Key Features

The voice changer offers a variety of different effects. For instance, Male pitch, female pitch, helium, custom pitch, baby, alien, Atari, etc.
Clownfish for Chrome is compatible with different devices. Also, it is available for both 32-bit and 64-bit.
You can access the voice changer easily from the Chrome browser. It is very reliable for Google Meet. Moreover, you can convert text to speech with Clownfish Voice Changer.

5. VoiceMod

Do you know any voice changer that is free and widely used? We are talking about VoiceMod. You can use this voice changer for Google Meet and change your voice to a wide range of effects catalog. With VoiceMod, you can sound funny, professional, or else sound like a girl and many more. It is easy to use and set up the voice changer.

Key Features

With this voice changer, you can get a real-time demo of different voice effects. The tool is efficient enough to modify your voice within seconds.
VoiceMod is compatible with many platforms such as WhatsApp Desktop, TeamSpeak, Discord, League of Legends, and Fortnite. Moreover, it supports Windows 7, 8, 8.1, and 10. The voice changer will soon be available for Linux and Mac.
It easily integrates with Stream Deck and Streamlabs OBS. The integration takes less than a minute.

Part 2. Tips and Tricks to Help You Better Use Google Meet

Google Meet is a widely used platform for online group calls. With Google Meet voice changers, you can have fun during the long exhaustive group calls. Are you interested in learning more about Google Meet? The following section of this article will share various tips with which you can use Google Meet in a better way. Let’s start without any further delay.

· Change your Background

Do you know that you can change your background on Google Meet? For the sake of privacy or maybe just for fun, you can change the background on Google Meet call. This is also known as Virtual Background, where you add your desired background or choose a background from the library of the app. With Google meet, you can also blur the background.

· Change the Layout

By default, the layout of Google Meet is set to Auto-switch. With this layout, the participants that speak are displayed as active participants. Who doesn’t like to change things a bit? There are 3 different layouts for Google Meet other than the default layout. You can select and switch between the different options and change the layout.

· Schedule a Meeting

Have you ever forgotten any of your meetings? Things like this will never happen again if you use Google Calendar. Google Meet has an integrated Google Calendar. You can mark the calendar whenever you schedule a meeting. Moreover, with Google Meet, you can also add members and notify them about the scheduled meeting so that no one forgets anything.

· Pin the Speaker

Have you ever faced difficulty in finding the person who is speaking in a meeting? You can now pin the important person on Google Meet. With this, your struggle of always finding the speaker comes to an end. For this, click on the person who is speaking and pin them to the main screen, making them visible for you all the time. You can un-pin them by re-clicking.

Last Words

To have a healthy and happy life, you should enjoy the little moments. In the same way, you can enjoy boring meetings if you take help from voice changers. This article has talked about the 5 best Voice Changers for Google Meet. We also shared a few tips so that you can use Google Meet in a better way.

02 Tips and Tricks to Help You Better Use Google Meet

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later