Audiophile’s Guide to Clear Audio: Overcoming Background Sibilance and Hum

Creating content can be fun most of the time. The shoot is perfect and the scenes are spotless. You are confident that you got everything right. But then, when you listen to the recording, you notice a continuous hissing sound. This takes you back as you have to decide to remove hiss from audio before editing the video. Luckily, several hiss removal approaches will work just fine. In this article, we take you through the audio cleanup process to help you with your hiss reduction efforts.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Methods to Embed Audios in MKV Files: New Edition Update Guide

How to Add Audio to MKV

Shanoon Cox

Mar 27, 2024• Proven solutions

How to add a .mka audio track to a .mkv video? Is there a simple step-by-step? I tried Mkvmerge but it doesn’t seem to work with this.

You may come across the same problem: want to add audio to MKV but find video editing tools like Mkvmerge doesn’t work. Well, then what’s the available way to do so? In this article, I’ll show you how to add audio to MKV file by using Wondershare Filmora . If you are looking for such a solution, just feel free to see the guide below. This program enables you to add specified audio track to MKV as well as apply more effects to your source file.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1 Add video and audio files

Download and install Wondershare Filmora first. Once run it, click the “Import” button to load both the video and audio files. You can also directly drag and drop the media files to the program.

2 Add audio to MKV

Now what you have to do is to drop the video file to the Video track in the Timeline and audio to the Audio Track. Then you can make the audio file fit your video by trimming or double click the audio file to set fade in/out effects, speed up or slow down it, adjust volume so that it doesn’t drown out the original audio of your video, etc. If you want to remove the original audio, just right click the video in Timeline and select “Audio Detach” and press “Delete” to remove audio from video.

Besides adding an audio file, you can also use Wondershare Filmora (originally Wondershare Video Editor) to record and add your own voiceover. To do this, simply click the “Record” button on the toolbar and record the voiceover in the Record Audio window. Click the red button to get started and “OK” to save it and return to the main interface. The recorded voiceover will then appear in the audio track. Then adjust its position, volume, etc., just like any audio files.

3 Export the new MKV file

After adding audio, click “Play” to preview and listen to the new file. Then click “Create” to export your MKV file. Here are various choices for you: export the video to various video formats, convert the video to play on different mobile devices, upload the video to YouTube instantly or burn video to DVD disc. Select a desired output way and hit “Create” to start exporting the video file with the added audio.

Learn more about Wondershare Filmora:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

How to add a .mka audio track to a .mkv video? Is there a simple step-by-step? I tried Mkvmerge but it doesn’t seem to work with this.

You may come across the same problem: want to add audio to MKV but find video editing tools like Mkvmerge doesn’t work. Well, then what’s the available way to do so? In this article, I’ll show you how to add audio to MKV file by using Wondershare Filmora . If you are looking for such a solution, just feel free to see the guide below. This program enables you to add specified audio track to MKV as well as apply more effects to your source file.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1 Add video and audio files

Download and install Wondershare Filmora first. Once run it, click the “Import” button to load both the video and audio files. You can also directly drag and drop the media files to the program.

2 Add audio to MKV

Now what you have to do is to drop the video file to the Video track in the Timeline and audio to the Audio Track. Then you can make the audio file fit your video by trimming or double click the audio file to set fade in/out effects, speed up or slow down it, adjust volume so that it doesn’t drown out the original audio of your video, etc. If you want to remove the original audio, just right click the video in Timeline and select “Audio Detach” and press “Delete” to remove audio from video.

Besides adding an audio file, you can also use Wondershare Filmora (originally Wondershare Video Editor) to record and add your own voiceover. To do this, simply click the “Record” button on the toolbar and record the voiceover in the Record Audio window. Click the red button to get started and “OK” to save it and return to the main interface. The recorded voiceover will then appear in the audio track. Then adjust its position, volume, etc., just like any audio files.

3 Export the new MKV file

After adding audio, click “Play” to preview and listen to the new file. Then click “Create” to export your MKV file. Here are various choices for you: export the video to various video formats, convert the video to play on different mobile devices, upload the video to YouTube instantly or burn video to DVD disc. Select a desired output way and hit “Create” to start exporting the video file with the added audio.

Learn more about Wondershare Filmora:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

How to add a .mka audio track to a .mkv video? Is there a simple step-by-step? I tried Mkvmerge but it doesn’t seem to work with this.

You may come across the same problem: want to add audio to MKV but find video editing tools like Mkvmerge doesn’t work. Well, then what’s the available way to do so? In this article, I’ll show you how to add audio to MKV file by using Wondershare Filmora . If you are looking for such a solution, just feel free to see the guide below. This program enables you to add specified audio track to MKV as well as apply more effects to your source file.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1 Add video and audio files

Download and install Wondershare Filmora first. Once run it, click the “Import” button to load both the video and audio files. You can also directly drag and drop the media files to the program.

2 Add audio to MKV

Now what you have to do is to drop the video file to the Video track in the Timeline and audio to the Audio Track. Then you can make the audio file fit your video by trimming or double click the audio file to set fade in/out effects, speed up or slow down it, adjust volume so that it doesn’t drown out the original audio of your video, etc. If you want to remove the original audio, just right click the video in Timeline and select “Audio Detach” and press “Delete” to remove audio from video.

Besides adding an audio file, you can also use Wondershare Filmora (originally Wondershare Video Editor) to record and add your own voiceover. To do this, simply click the “Record” button on the toolbar and record the voiceover in the Record Audio window. Click the red button to get started and “OK” to save it and return to the main interface. The recorded voiceover will then appear in the audio track. Then adjust its position, volume, etc., just like any audio files.

3 Export the new MKV file

After adding audio, click “Play” to preview and listen to the new file. Then click “Create” to export your MKV file. Here are various choices for you: export the video to various video formats, convert the video to play on different mobile devices, upload the video to YouTube instantly or burn video to DVD disc. Select a desired output way and hit “Create” to start exporting the video file with the added audio.

Learn more about Wondershare Filmora:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

How to add a .mka audio track to a .mkv video? Is there a simple step-by-step? I tried Mkvmerge but it doesn’t seem to work with this.

You may come across the same problem: want to add audio to MKV but find video editing tools like Mkvmerge doesn’t work. Well, then what’s the available way to do so? In this article, I’ll show you how to add audio to MKV file by using Wondershare Filmora . If you are looking for such a solution, just feel free to see the guide below. This program enables you to add specified audio track to MKV as well as apply more effects to your source file.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1 Add video and audio files

Download and install Wondershare Filmora first. Once run it, click the “Import” button to load both the video and audio files. You can also directly drag and drop the media files to the program.

2 Add audio to MKV

Now what you have to do is to drop the video file to the Video track in the Timeline and audio to the Audio Track. Then you can make the audio file fit your video by trimming or double click the audio file to set fade in/out effects, speed up or slow down it, adjust volume so that it doesn’t drown out the original audio of your video, etc. If you want to remove the original audio, just right click the video in Timeline and select “Audio Detach” and press “Delete” to remove audio from video.

Besides adding an audio file, you can also use Wondershare Filmora (originally Wondershare Video Editor) to record and add your own voiceover. To do this, simply click the “Record” button on the toolbar and record the voiceover in the Record Audio window. Click the red button to get started and “OK” to save it and return to the main interface. The recorded voiceover will then appear in the audio track. Then adjust its position, volume, etc., just like any audio files.

3 Export the new MKV file

After adding audio, click “Play” to preview and listen to the new file. Then click “Create” to export your MKV file. Here are various choices for you: export the video to various video formats, convert the video to play on different mobile devices, upload the video to YouTube instantly or burn video to DVD disc. Select a desired output way and hit “Create” to start exporting the video file with the added audio.

Learn more about Wondershare Filmora:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Top Audio Splitter on Mac - 2024 Update

Top Audio Splitter on Mac in 2024

Shanoon Cox

Mar 27, 2024• Proven solutions

There are times when you need to split audio files with the use of your Mac. The fastest and best way to do the task is with the use of an audio splitter for Mac. There are lots of programs made to split audio tracks. If you are looking for the best free apps for the Mac, then you are on the right page. Below are the top audio splitters for Mac users.

Part 1. Recommended Best Audio Splitting Tool: Wondershare Filmora

Although widely known as the best video editing software for beginners, Wondershare Filmora video editor for Mac also serves as a great audio editing tool. It can split, trim, fade-in or out, change the speed of your audio files, etc.

One surprising feature this tool offers is its multi-audio track feature. Sometimes we need to add not just background music, but also additional voiceovers for a home video we create. It is almost impossible to add both two audio tracks to a video at the same time. However, by using Filmora, you will be able to add up to 3 audio tracks at a time. That means your voiceover, background music, even some funny or emotional sound effects can be added to a video clip simultaneously with one click of the button. Download a free trial version to try it right now:

Below is a brief video introduction to this amazing program:

If you are Windows users, check this tutorial instead.

Part 2. Five Best Audio Trimming Tools You Can Choose

Below are the top 5 audio splitters for Mac devices you can choose to use. Read on to take a close look at them.

1. Mp3splt (Mac)

Mp3splt(Mac) is one of the best audio splitter software available. It is open-source software that has the ability to split MP3 and Ogg Vorbis audio files. It is not only useful to split large MP3 files into smaller files or to divide entire albums into individual tracks, but also easy to use. You just need to select a start and end time position.

The best thing about Mp3splt is that it doesn’t decode the file during the splitting process, which avoids loss due to digital degeneration. If you need to split an album, you can manually input the split points and the filenames, or you can get them through CDDB or .CUE files. The audio splitter Mac software also supports automatic silence split that can be utilized to adjust split points as well as supporting ID3v1 and ID3v2 tags. It is also available for Windows and Linux users.

2. Macsome Audio Splitter Freeware

Another free audio splitting software running on Mac computer that you can use is Macsome Audio Splitter Freeware. It can be used to split MP3 files into smaller files in just a couple of seconds. It preserves the tags and the sound quality of the files while splitting them. It also allows batch splitting, which is good if you have several audio files that you need to split. To split audio files, you can select by time or number of pieces. You can also choose the start and end time to split.

Macsome Audio Splitter Freeware has a playback feature that allows you to play the audio file and adjust its volume. The audio splitter Mac software is compatible with Mac OSX 10.4.x or 10.5.x with at least 512 MB of physical RAM. The only downside is that it can only split audio files that are unprotected or DRM-free.

3. MP3TrueEdit for Mac

MP3TrueEdit is a simple audio splitter Mac tool that has been designed to edit MP3 audio files. While it costs $11.99 on the Mac App Store, you can download and try it for free. The developers have made the app to split or edit files without the need to decompress and recompress the audio. It guarantees that there is no loss in the quality. It is also designed to protect the audio file from becoming corrupt or invalid during the splitting process.

MP3TrueEdit is more than just an audio splitter Mac software. It is an audio editing tool that allows you to edit audio files. It can also be used to record meetings, talks or lectures so that you don’t have to miss a word. You can also record band practice sessions or choir rehearsals. Then you can edit the tempo or pitch of the recording to suit your needs.

4. MP3 Trimmer (Mac)

MP3 Trimmer (Mac) is a quite easy to use audio splitter Mac tool. Not only does it allow you to split MP3 files, it can also be used to edit, join, repair, analyze audio files, and a lot more. There’s no need to re-encode and convert file formats with the use of various applications. All you need is the MP3 Trimmer if you want to remove portions of your MP3 files without losing the quality.

With the MP3 Trimmer, you will be able to remove the undesired portion of the audio file, add some fade-in/fade-out effects, change gain and add silence. If you have a couple of large audio files that needs to be split, then you can benefit from the batch-edit feature of the MP3 Trimmer. It also has built-in tools that will help you analyze and repair broken audio files. It is free to use as long as you want.

5. AudioSlicer for Mac

AudioSlicer is a Cocoa GUI app for Mac OS X. It’s designed to find all the silences in an MP3 file. It also allows you to split the audio file and tag them properly. While there are other audio splitter Mac apps that can do the tasks automatically according to specific criteria, AudioSlicer displays the silences within the specified duration. It allows you to listen to the audio before and after the silence. Then you can decide if you want to do the split at that point. Splitting of the file is done without any loss to the quality because there is no decoding or re-encoding of the audio file during the process. It is compatible with Mac OS X 10.3 and above and supports both Intel Macs and PowerPC.

That’s the best audio trimming software for Mac. The most recommended is Wondershare Filmora for Mac. If you have other good choices, welcome to share with us.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

There are times when you need to split audio files with the use of your Mac. The fastest and best way to do the task is with the use of an audio splitter for Mac. There are lots of programs made to split audio tracks. If you are looking for the best free apps for the Mac, then you are on the right page. Below are the top audio splitters for Mac users.

Part 1. Recommended Best Audio Splitting Tool: Wondershare Filmora

Although widely known as the best video editing software for beginners, Wondershare Filmora video editor for Mac also serves as a great audio editing tool. It can split, trim, fade-in or out, change the speed of your audio files, etc.

One surprising feature this tool offers is its multi-audio track feature. Sometimes we need to add not just background music, but also additional voiceovers for a home video we create. It is almost impossible to add both two audio tracks to a video at the same time. However, by using Filmora, you will be able to add up to 3 audio tracks at a time. That means your voiceover, background music, even some funny or emotional sound effects can be added to a video clip simultaneously with one click of the button. Download a free trial version to try it right now:

Below is a brief video introduction to this amazing program:

If you are Windows users, check this tutorial instead.

Part 2. Five Best Audio Trimming Tools You Can Choose

Below are the top 5 audio splitters for Mac devices you can choose to use. Read on to take a close look at them.

1. Mp3splt (Mac)

Mp3splt(Mac) is one of the best audio splitter software available. It is open-source software that has the ability to split MP3 and Ogg Vorbis audio files. It is not only useful to split large MP3 files into smaller files or to divide entire albums into individual tracks, but also easy to use. You just need to select a start and end time position.

The best thing about Mp3splt is that it doesn’t decode the file during the splitting process, which avoids loss due to digital degeneration. If you need to split an album, you can manually input the split points and the filenames, or you can get them through CDDB or .CUE files. The audio splitter Mac software also supports automatic silence split that can be utilized to adjust split points as well as supporting ID3v1 and ID3v2 tags. It is also available for Windows and Linux users.

2. Macsome Audio Splitter Freeware

Another free audio splitting software running on Mac computer that you can use is Macsome Audio Splitter Freeware. It can be used to split MP3 files into smaller files in just a couple of seconds. It preserves the tags and the sound quality of the files while splitting them. It also allows batch splitting, which is good if you have several audio files that you need to split. To split audio files, you can select by time or number of pieces. You can also choose the start and end time to split.

Macsome Audio Splitter Freeware has a playback feature that allows you to play the audio file and adjust its volume. The audio splitter Mac software is compatible with Mac OSX 10.4.x or 10.5.x with at least 512 MB of physical RAM. The only downside is that it can only split audio files that are unprotected or DRM-free.

3. MP3TrueEdit for Mac

MP3TrueEdit is a simple audio splitter Mac tool that has been designed to edit MP3 audio files. While it costs $11.99 on the Mac App Store, you can download and try it for free. The developers have made the app to split or edit files without the need to decompress and recompress the audio. It guarantees that there is no loss in the quality. It is also designed to protect the audio file from becoming corrupt or invalid during the splitting process.

MP3TrueEdit is more than just an audio splitter Mac software. It is an audio editing tool that allows you to edit audio files. It can also be used to record meetings, talks or lectures so that you don’t have to miss a word. You can also record band practice sessions or choir rehearsals. Then you can edit the tempo or pitch of the recording to suit your needs.

4. MP3 Trimmer (Mac)

MP3 Trimmer (Mac) is a quite easy to use audio splitter Mac tool. Not only does it allow you to split MP3 files, it can also be used to edit, join, repair, analyze audio files, and a lot more. There’s no need to re-encode and convert file formats with the use of various applications. All you need is the MP3 Trimmer if you want to remove portions of your MP3 files without losing the quality.

With the MP3 Trimmer, you will be able to remove the undesired portion of the audio file, add some fade-in/fade-out effects, change gain and add silence. If you have a couple of large audio files that needs to be split, then you can benefit from the batch-edit feature of the MP3 Trimmer. It also has built-in tools that will help you analyze and repair broken audio files. It is free to use as long as you want.

5. AudioSlicer for Mac

AudioSlicer is a Cocoa GUI app for Mac OS X. It’s designed to find all the silences in an MP3 file. It also allows you to split the audio file and tag them properly. While there are other audio splitter Mac apps that can do the tasks automatically according to specific criteria, AudioSlicer displays the silences within the specified duration. It allows you to listen to the audio before and after the silence. Then you can decide if you want to do the split at that point. Splitting of the file is done without any loss to the quality because there is no decoding or re-encoding of the audio file during the process. It is compatible with Mac OS X 10.3 and above and supports both Intel Macs and PowerPC.

That’s the best audio trimming software for Mac. The most recommended is Wondershare Filmora for Mac. If you have other good choices, welcome to share with us.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

There are times when you need to split audio files with the use of your Mac. The fastest and best way to do the task is with the use of an audio splitter for Mac. There are lots of programs made to split audio tracks. If you are looking for the best free apps for the Mac, then you are on the right page. Below are the top audio splitters for Mac users.

Part 1. Recommended Best Audio Splitting Tool: Wondershare Filmora

Although widely known as the best video editing software for beginners, Wondershare Filmora video editor for Mac also serves as a great audio editing tool. It can split, trim, fade-in or out, change the speed of your audio files, etc.

One surprising feature this tool offers is its multi-audio track feature. Sometimes we need to add not just background music, but also additional voiceovers for a home video we create. It is almost impossible to add both two audio tracks to a video at the same time. However, by using Filmora, you will be able to add up to 3 audio tracks at a time. That means your voiceover, background music, even some funny or emotional sound effects can be added to a video clip simultaneously with one click of the button. Download a free trial version to try it right now:

Below is a brief video introduction to this amazing program:

If you are Windows users, check this tutorial instead.

Part 2. Five Best Audio Trimming Tools You Can Choose

Below are the top 5 audio splitters for Mac devices you can choose to use. Read on to take a close look at them.

1. Mp3splt (Mac)

Mp3splt(Mac) is one of the best audio splitter software available. It is open-source software that has the ability to split MP3 and Ogg Vorbis audio files. It is not only useful to split large MP3 files into smaller files or to divide entire albums into individual tracks, but also easy to use. You just need to select a start and end time position.

The best thing about Mp3splt is that it doesn’t decode the file during the splitting process, which avoids loss due to digital degeneration. If you need to split an album, you can manually input the split points and the filenames, or you can get them through CDDB or .CUE files. The audio splitter Mac software also supports automatic silence split that can be utilized to adjust split points as well as supporting ID3v1 and ID3v2 tags. It is also available for Windows and Linux users.

2. Macsome Audio Splitter Freeware

Another free audio splitting software running on Mac computer that you can use is Macsome Audio Splitter Freeware. It can be used to split MP3 files into smaller files in just a couple of seconds. It preserves the tags and the sound quality of the files while splitting them. It also allows batch splitting, which is good if you have several audio files that you need to split. To split audio files, you can select by time or number of pieces. You can also choose the start and end time to split.

Macsome Audio Splitter Freeware has a playback feature that allows you to play the audio file and adjust its volume. The audio splitter Mac software is compatible with Mac OSX 10.4.x or 10.5.x with at least 512 MB of physical RAM. The only downside is that it can only split audio files that are unprotected or DRM-free.

3. MP3TrueEdit for Mac

MP3TrueEdit is a simple audio splitter Mac tool that has been designed to edit MP3 audio files. While it costs $11.99 on the Mac App Store, you can download and try it for free. The developers have made the app to split or edit files without the need to decompress and recompress the audio. It guarantees that there is no loss in the quality. It is also designed to protect the audio file from becoming corrupt or invalid during the splitting process.

MP3TrueEdit is more than just an audio splitter Mac software. It is an audio editing tool that allows you to edit audio files. It can also be used to record meetings, talks or lectures so that you don’t have to miss a word. You can also record band practice sessions or choir rehearsals. Then you can edit the tempo or pitch of the recording to suit your needs.

4. MP3 Trimmer (Mac)

MP3 Trimmer (Mac) is a quite easy to use audio splitter Mac tool. Not only does it allow you to split MP3 files, it can also be used to edit, join, repair, analyze audio files, and a lot more. There’s no need to re-encode and convert file formats with the use of various applications. All you need is the MP3 Trimmer if you want to remove portions of your MP3 files without losing the quality.

With the MP3 Trimmer, you will be able to remove the undesired portion of the audio file, add some fade-in/fade-out effects, change gain and add silence. If you have a couple of large audio files that needs to be split, then you can benefit from the batch-edit feature of the MP3 Trimmer. It also has built-in tools that will help you analyze and repair broken audio files. It is free to use as long as you want.

5. AudioSlicer for Mac

AudioSlicer is a Cocoa GUI app for Mac OS X. It’s designed to find all the silences in an MP3 file. It also allows you to split the audio file and tag them properly. While there are other audio splitter Mac apps that can do the tasks automatically according to specific criteria, AudioSlicer displays the silences within the specified duration. It allows you to listen to the audio before and after the silence. Then you can decide if you want to do the split at that point. Splitting of the file is done without any loss to the quality because there is no decoding or re-encoding of the audio file during the process. It is compatible with Mac OS X 10.3 and above and supports both Intel Macs and PowerPC.

That’s the best audio trimming software for Mac. The most recommended is Wondershare Filmora for Mac. If you have other good choices, welcome to share with us.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

There are times when you need to split audio files with the use of your Mac. The fastest and best way to do the task is with the use of an audio splitter for Mac. There are lots of programs made to split audio tracks. If you are looking for the best free apps for the Mac, then you are on the right page. Below are the top audio splitters for Mac users.

Part 1. Recommended Best Audio Splitting Tool: Wondershare Filmora

Although widely known as the best video editing software for beginners, Wondershare Filmora video editor for Mac also serves as a great audio editing tool. It can split, trim, fade-in or out, change the speed of your audio files, etc.

One surprising feature this tool offers is its multi-audio track feature. Sometimes we need to add not just background music, but also additional voiceovers for a home video we create. It is almost impossible to add both two audio tracks to a video at the same time. However, by using Filmora, you will be able to add up to 3 audio tracks at a time. That means your voiceover, background music, even some funny or emotional sound effects can be added to a video clip simultaneously with one click of the button. Download a free trial version to try it right now:

Below is a brief video introduction to this amazing program:

If you are Windows users, check this tutorial instead.

Part 2. Five Best Audio Trimming Tools You Can Choose

Below are the top 5 audio splitters for Mac devices you can choose to use. Read on to take a close look at them.

1. Mp3splt (Mac)

Mp3splt(Mac) is one of the best audio splitter software available. It is open-source software that has the ability to split MP3 and Ogg Vorbis audio files. It is not only useful to split large MP3 files into smaller files or to divide entire albums into individual tracks, but also easy to use. You just need to select a start and end time position.

The best thing about Mp3splt is that it doesn’t decode the file during the splitting process, which avoids loss due to digital degeneration. If you need to split an album, you can manually input the split points and the filenames, or you can get them through CDDB or .CUE files. The audio splitter Mac software also supports automatic silence split that can be utilized to adjust split points as well as supporting ID3v1 and ID3v2 tags. It is also available for Windows and Linux users.

2. Macsome Audio Splitter Freeware

Another free audio splitting software running on Mac computer that you can use is Macsome Audio Splitter Freeware. It can be used to split MP3 files into smaller files in just a couple of seconds. It preserves the tags and the sound quality of the files while splitting them. It also allows batch splitting, which is good if you have several audio files that you need to split. To split audio files, you can select by time or number of pieces. You can also choose the start and end time to split.

Macsome Audio Splitter Freeware has a playback feature that allows you to play the audio file and adjust its volume. The audio splitter Mac software is compatible with Mac OSX 10.4.x or 10.5.x with at least 512 MB of physical RAM. The only downside is that it can only split audio files that are unprotected or DRM-free.

3. MP3TrueEdit for Mac

MP3TrueEdit is a simple audio splitter Mac tool that has been designed to edit MP3 audio files. While it costs $11.99 on the Mac App Store, you can download and try it for free. The developers have made the app to split or edit files without the need to decompress and recompress the audio. It guarantees that there is no loss in the quality. It is also designed to protect the audio file from becoming corrupt or invalid during the splitting process.

MP3TrueEdit is more than just an audio splitter Mac software. It is an audio editing tool that allows you to edit audio files. It can also be used to record meetings, talks or lectures so that you don’t have to miss a word. You can also record band practice sessions or choir rehearsals. Then you can edit the tempo or pitch of the recording to suit your needs.

4. MP3 Trimmer (Mac)

MP3 Trimmer (Mac) is a quite easy to use audio splitter Mac tool. Not only does it allow you to split MP3 files, it can also be used to edit, join, repair, analyze audio files, and a lot more. There’s no need to re-encode and convert file formats with the use of various applications. All you need is the MP3 Trimmer if you want to remove portions of your MP3 files without losing the quality.

With the MP3 Trimmer, you will be able to remove the undesired portion of the audio file, add some fade-in/fade-out effects, change gain and add silence. If you have a couple of large audio files that needs to be split, then you can benefit from the batch-edit feature of the MP3 Trimmer. It also has built-in tools that will help you analyze and repair broken audio files. It is free to use as long as you want.

5. AudioSlicer for Mac

AudioSlicer is a Cocoa GUI app for Mac OS X. It’s designed to find all the silences in an MP3 file. It also allows you to split the audio file and tag them properly. While there are other audio splitter Mac apps that can do the tasks automatically according to specific criteria, AudioSlicer displays the silences within the specified duration. It allows you to listen to the audio before and after the silence. Then you can decide if you want to do the split at that point. Splitting of the file is done without any loss to the quality because there is no decoding or re-encoding of the audio file during the process. It is compatible with Mac OS X 10.3 and above and supports both Intel Macs and PowerPC.

That’s the best audio trimming software for Mac. The most recommended is Wondershare Filmora for Mac. If you have other good choices, welcome to share with us.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: