“Unveiling the Premier List of Cost-Free Sound Intensity Modifiers”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Adobe Premiere Pro

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

VLC Media Player

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

MP3Gain

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

Thunderous Acclaim: Unearthing Powerful Applause Sounds

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Sound is pretty essential in almost every video. But why? It engages the audience and gives an awakening to emotional responses. It generally helps you create a mood for your entire video. Suppose you have an elevator scene, you may want to make it look realistic by adding the ding sound to give your whole set some effect. Looking for applause sound effect to create a fun element in your videos or presentation? Well, you have come to the right place.

Ever wonder why some videos on YouTube get massive views even with average content? Applause audio is mostly used in presentations or videos to create a sense of motivation. It can make the scenes on the screen more alive and enjoyable. But how do you find the perfect audio that matches your requirement? The key is to use sound to tell your audience a story.

This article will discuss different ways of downloading sound effects and one particular software that caters to all your video editing needs. Sounds interesting? Then without wasting any more time, let’s get into it.

Part 1 Ways to Download All Kinds of Sound Effect

Method 1: Download Using YouTube Downloader

Y2 Mate is an effective working website and gives you the option to convert YouTube videos to mp3. Y2mate allows you to convert & download videos from YouTube, Facebook, Video, Dailymotion, etc., to Mp3 and MP4 in HD quality. Y2mate supports downloading all video formats such as MP4, M4V, 3GP, MP3, etc. You can easily download thousands of videos from YouTube and other sites. All you have to do is –

Step 1: Go to Youtube.com from your web browser.

Step 2: Search the type of Applause/Crowd music you require and click on that.

Step 3: Copy the link to the video.

Step 4: Go to https://www.y2mate.com/en142 .

Step 5: Paste the link of the copied YouTube Video and click enter.

Step 6: There will be a conversion to the mp3 button for your applause sound effect.

Click “Start” to begin the converting procedure.

Step 7: After mp3 conversion, click download, and it will automatically be downloaded and saved to your desktop.

Method 2: Make an Applause Sound Effect Yourself

You cannot always pick and choose ready-made sound effects from the internet. Sometimes, you need custom sounds specific to the context of your video. Regardless of thousands of options you find on YouTube or sound software. Your applause sound effect might not sync with the visuals in your video. You need to create your sounds and be your foley artist.

Shocking, isn’t it? But, this method is proven to be extremely realistic. Not everybody gives it a thought, but most of the sounds you hear in your favorite movies or TV shows are created artificially. For example, a creaking door sound or a slap on a character’s face are created by foley artists using different objects. Similarly, for an applause or crowd sound, gather a group of people, make a proper audience setting, and record them clapping. And that’s when you get your sound effect which is realistic to the extreme.

If you need sound effects for a professional purpose rather than personal use, we recommend using a dedicated audio recorder. The recorder allows you to save the files and edit or omit anything you want. Once you use it, you will notice how it unfolds all the details, even in a simple sound. You can use the original zoom H4N and pack it up with a shotgun microphone.

I guess you have decided which tool you will be using. Here are some things for you to remember –

Going to lecture halls is a great way of recording clear audience applause sound effects. Normally, people behave well in the lobby and don’t scream or yell while clapping.
If you want crowd applause sound effects with lots of cheering and booing, you should go to a football stadium. Whenever a team scores a goal, one side of the stadium will mourn, but the other will explode with applause and laughter.
You can try different games to get a variety of sounds. Normally the crowd size and game type determine how the applause sounds will be. So choose accordingly.
Suppose the video shows a scene of the ocean like the photo above. Then don’t just use the sound of waves and get it over with. Layer it with some other subtle sounds like the chirping of birds and breezes. Covering one sound over another is a great way to make the viewer fully immerse into the video.

Method 3: Use Royalty-Free Websites

Thankfully now we have websites with huge collections of audio snippets and recordings. It will require another article to talk about only the popular free sites. But let’s talk about two highly incredible websites. The first one is Freesound. You already guessed what it does from the name. More than 500k sound clips are at your disposal for free.

And the second website is Avosound. Everything is categorized and arranged under a label. So that it is easier for you to find anything you want, you can just log in and use the files for personal use however you like. But remember to give credit to the original artist if you are using it in a video. The only copyright claim that Freesound demands are when you try to sell it to another party.

If you want to download several yet similar sounds,99sounds is your best choice. 99Sounds is a directory that offers royalty-free themed collections of different sounds.

You can check out this small tutorial for downloading sound clips from these websites.

Step 1: Go to the website. Log in using your username and accept their terms and conditions.

Step 2: You will enter into the big library of sound samples.

Search for your desired one using a keyword like” applause sound effect”.

Step 3: The results will narrow down to the only relevant ones.

Play them one by one and select the appropriate one.

Step 4: Next, go to the import section and send it to your media library.

The applause sound effect mp3 file is downloaded. It’s as easy as this.

Method 4: Outsource Sound Effects

The last method is a paid one. Yes, sometimes we value our time more than money. You might not have the time and patience to create the sound effect you want. The easier way is to get it done by sound artists. There are plenty of SFX experts waiting for you in the marketplace. All you have to do is post the task and the time limit and budget. You will easily find freelancers who offer such services at an affordable price.

The best thing about outsourcing is that you are not confined to a specific location. You can make use of the best talents across the world.

Part 2 Use Filmora to Add Background Music to Your Video

Filmora is a video editor that gives a pinch of extra creativity and magic to your videos. It gives you amazing effects, transitions, music, and sound effects. It’s perfect for those who aspire to be filmmakers and love to do post-production work. Wonder-share Filmora is one of the best video editing software with cool features compared to other competing video editing software. We’ve got you all covered, from the best features to techniques of using them. This is a complete guide about the Filmora App available on Apple Mac/Windows and your iPhone device app store.

Features

You get to edit and export your videos at resolutions up to 4K.
Removal of background noise easily.
Perfect adjustment of White balance and dynamic range of clips.
Pan and zoom movement option available.
You can add up to 5 text tracks and ten music tracks to the timeline.

Guideline for How to Add Sound Effects to Video with Filmora:

Step 1 Import Already Downloaded Applause sound mp3 File

Download the app from the official site if you have not). Launch and bring the audio file to the Filmora app by clicking MEDIA and the IMPORT button below the menu bar. From the drop-down menu, select ‘Import Media Files’ to select the video clip, and then repeat the process to choose the applause sound audio file.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2 Edit the Audio File

You can modify the music by double-tapping the audio on the timeline. It will display the audio panel at the top of the screen. You may arrange the audio to fade in or out, adjust the pitch, speed, and volume, and select the suitable equalization.

Step 3 Merge the Audio File with Video

Drag and drop the audio over the video you are editing on the timeline to merge them.

Step 4 Exporting the Edited Video

After you’ve made the necessary adjustments to your movie and added the dog bark audio, click the ‘EXPORT’ option on the toolbar to export it. The produced file may be saved in.MP4 and.WMV formats, also rename and set your desired resolution.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

Using sound effects that make a scene relatable is nothing less than art. This article has surely cleared your confusion about applause sound effects and how to get them easily. With the help of our guidelines, you can download or create applaud sound effects and then add these effects into the video by using Filmora. We think Filmora has all the toolkits built to assist you in your projects. It is so simple to use, and the result is always top-notch. No wonder it is so loved by amateurs and pro editors worldwide.