Unveiling the Leading Mixers: 5 Highest Rated Audio/Video Combiner Devices

When it comes to video or music production, a lot of work is involved in mixing sound. To facilitate an impressive result, you need a top-quality audio video mixer. This would allow you effectively combine audio files and videos. You also need the mixer to allow you to touch up elements like the sound quality and speed and eliminate background disturbance.

For most music producers, and efficient audio video mixer is crucial. They also need the mixer to be easy to use and efficient enough to offer excellent results. In this article, we’ll explore the five best audio video mixers we could find. Explore this review and choose the mixer that best suits your needs.

Best Audio Video Mixers to Consider

Below, we’ll carefully review the best mixers to take your audio and video files to the next level. So keep reading to find the best fit for you.

1. How to Mix Audio Video Tracks with Wondershare Filmora

Adobe Audition

**Compatibility:**Mac and Windows

This is a next-level audio video mixer that we find to be an excellent option for mixing, recording, editing, and restoring files. This mixing software allows you easily record music or podcast for various platforms. In addition, it offers a sharing feature that will enable you to share directly from the platform. Adobe Audition provides two mixing modes: the waveform view and the multitrack view. While the Waveform view is ideal for stereo editing, the multitrack view allows users to edit tracks on a timeline. Luckily Audition enables you to switch between both views whenever you want, so you don’t have to choose one.

One of the impressive features that make Adobe Audition one of the best audio video mixers in 2022 is the ability to remove silence from inactive parts in the audio file. While doing this, you don’t have to lose sync in the file. As a result, it is ideal for podcasts and interview audios. It also features a loudness radar that allows you to analyze submix, single tracks, full mix, and many more according to several broadcast requirements.

Another nice feature we found impressive with Audition is the DeReverb tool that allows you to eliminate or remove reverberations from the audio file. IT efficiently handles short delays and spacious reverbs in your video and audio files. The sound remover tool is another impressive tool that allows you to remove car alarms, errant bumps, paper shuffling, and other unnecessary sounds from your audio and video file. You also gain access to the music remix tool that allows you to cut new versions of songs without necessarily sending them to the remixer.

You can efficiently adjust the song’s target duration to help you get the perfect fit. You can also customize the splices or favor rhythm elements to ensure the beats remain locked when necessary. All the functions available on Adobe Audition are useful for your audio and video mixes.

Pros

• Strong sound removal, audio restoration, and noise reduction tools
• 100BG cloud storage available for all users
• You can access content and tutorials on how to use the software in the Adobe community
• Various visualization tools
• New loudness meter for streaming services

Cons

• The plans limit the features you have access to
• It doesn’t offer MIDI support

EaseUS Video Mixer

**Compatibility:**Windows

Another excellent audio video mixer you can consider that makes out the list is the EaseUS Video Mixer. Its features go beyond the video editing features and extend to audio-video mixing. It is a mixing software perfect for trimming video clips without limiting the length you can upload.

EaseUS offers a paid plan to access varying advanced filters and effects for your audio and video files. You can also import your files from various storage devices for efficient mixing and editing. The video editing software has a toolbar that gives you direct access to the mixing software. You can split, merge and mix video files as you want. This video mixing software also allows users to speed up or reduce their video speed.

Amongst its unique features is the voiceover feature. A record voiceover button allows you to add a custom voice to your video when you click it. It will include the recording in the video to help you understand how it flows with the video during the preview. The Speech-to-Text feature also allows you to choose the text you want to convert to a sound and automatically include subtitles. You can then mix the video and audio and also trim it appropriately.

Pros

• Hundreds of music tracks you can easily import and mix with video files
• Standard video/audio editing features like acceleration, deacceleration, merging, and splitting
• Ease of use and intuitive interface
• An impressive choice of overlays

Cons

• You can’t export in 1080p when using the free version
• No 4K support
• Edition options are limited when you’re editing raw footage

Logic Pro X

**Compatibility:**Mac

This is one of the best audio video mixers in 2022. It is an Apple product and works as an efficient recording studio where professionals can easily create, edit and mix complex audio and video. This platform allows users to arrange their music files in a single platform in just a few minutes. You can also use the mixing software to capture composition and performances in their highest quality.

One of the top features that Logic Pro X offers users is the Dolby Atmos Support and the availability of over 2000 loops and Apple silicon support. This is in addition to the step sequencer on Login Remote that triggers audio on your iPad. Those who own Airpods understand how impressive Spatial Audio technology is. You can edit your video and audio to feel like you’re at the front of a live gig ow two people are having a conversation right in front of you when listening to a podcast.

It also allows users to export their edited audio and video in Dolby Atmos, which makes the content feel more alive. Its expanded sound library is another impressive feature we love about this tool. There are over 200 instrument and audio patches available with Logic Pro. If you want to mix high-quality songs for various purposes, Logic Pro X is a great fit.

Pros

• You can export your projects to Dolby Atmos
• iOS integration
• users can explore numerous loops, audio patches, and instruments
• You can implement plugins to enhance your audio files

Cons

• You need compatible headphones for Spatial Audio
• The software can lag performance on older PC versions due to its vast size

FL Studio

**Compatibility:**Windows

This is a top audio video mixer for professional song makers and composers looking to create impressive sound clips and music on a single platform. Additionally, there are different production-related features available on the platform. For example, FL Studio offers a full version synth bundle with frequency modulation, subtractive synthesis, and ring modulation. Additionally, it comes with three independent filters, 13 filter types, and some patches were created by deadmau5, amongst others.

The stock plugins in FL Studio can be found within and outside the box, meaning you can install and purchase their preferred DAW. The intuitive workflow of the native plugin is another reason why it is one of the best audio video mixers in 2022. Its main arrangement space is the Playlist, which you can use to sequence patterns of audio and MIDI. In addition, you can mix different audio projects with plugin delay compensation, effect chains, advanced automation, and sidechain control.

Pros

• An extensive number of plugins for users to mix audio project
• Over 100 effects and instruments to master
• Available for Mac and Windows
• Technical support at all times

Cons

• Plan prices tend to increase with updates and added plugins

Audacity

**Compatibility:**Mac and Windows

Another audio video mixer that you can try is Audacity. This open-source mixer allows you to record live sounds with its microphone or built-in mixer. Alternatively, you can import files in various formats or export the recordings all at once or one at a time. You can also edit digitized recordings from your storage device.

This app is also relatively easy to use and navigate. Editing and checking your sound quality with this software is relatively easy to use. It also offers users functions like resampling and dithering to enhance audio and video files.

Pros

• It allows you to cut and merge tracks
• You can easily analyze audio frequencies and use the reports
• New plugins are updated daily
• The spectrogram function provides visuals of sound frequencies

Cons

• Poor UI usability
• Mac version crashes frequently

Alternative Option: Wondershare Filmora

An alternative option that is arguably the best audio video mixer in 2022 is Wondershare Filmora . This top-notch software provides all the tools for efficient video and music editing. Many top-quality features allow editors to use it for their work. With Wondershare Filmore, you can adjust the pitch and speed and analyze various tracks and beats. In addition, Wondershare Filmore also provides audio visualization features that allow editors to remove background noises while editing easily.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Although it offers all the features a professional needs to effectively edit audio and video, it is also ideal for newbies with little to no editing needs. If you want to produce your content quickly, Filmora’s straightforward UI makes it relatively easy. When it comes to features, Filmora isn’t lacking with essential editing tools like zoom, trimming, audio-video mixing, cropping, and many more. It also comes with an AI filter which effectively suggests filters ideal for your video size. Overall, Wondershare remains the best audio video mixer for both beginners and professionals.

Pros

• You can sync audio and video files with a single tap
• There are different varieties of plugins available
• Audio visualizer allows you to spot pitch changes during editing and mixing
• You have access to royalty-free audio tracks and smart templates
• It comes with cloud storage

Cons

• It might be necessary to first upgrade your graphics card on some devices.

How to Mix Audio Video Tracks with Wondershare Filmora

To get started, you have to download Wondershare Filmora on your smartphone. You can download it from the official website. Once you download the Filmora software, install it on your file, and you’re ready to use it for your audio video mixes.

• Launch the software and click ‘new project’ on the welcome page to proceed.
• It will lead you to the editing panel; on the menu bar, click on ‘import media’ and then navigate to the system folder containing the audio files you want to edit.

• Alternatively, you can simply drag and drop the file to the timeline.

• Now, drag the audio and video and audio file to the timeline and place them next to each other.
• You can now make adjustments for each file on the timeline. You can change the length of your files and also change the placements. Wondershare Filmore allows you to slide the files on top of each other or even split the clips.

• You can also edit the audio file by changing the pitch, speed, volume, and other settings.

• Once you’re done editing, click the export tab and choose the format you’ll like to export your audio-video mix. You can also change the name and resolution of the file.
• Once you’re done making the final edits to the file, click the ‘export’ button, which will export your file.

Final Thoughts

The software we reviewed here is a top-quality audio video mixer with many features to take your audio and video files to the next level. Whether you’re a professional editor or a beginner hoping for a quality audio video mix, this software will help you achieve it. The different options here offer unique features, and we provided a list of their pros and cons to help you make the ideal decision for you. If you’re looking for an alternate option, Wondershare Filmore is an all-in-one editing software with several features that allows you to get the best results.

Adobe Audition

**Compatibility:**Mac and Windows

This is a next-level audio video mixer that we find to be an excellent option for mixing, recording, editing, and restoring files. This mixing software allows you easily record music or podcast for various platforms. In addition, it offers a sharing feature that will enable you to share directly from the platform. Adobe Audition provides two mixing modes: the waveform view and the multitrack view. While the Waveform view is ideal for stereo editing, the multitrack view allows users to edit tracks on a timeline. Luckily Audition enables you to switch between both views whenever you want, so you don’t have to choose one.

One of the impressive features that make Adobe Audition one of the best audio video mixers in 2022 is the ability to remove silence from inactive parts in the audio file. While doing this, you don’t have to lose sync in the file. As a result, it is ideal for podcasts and interview audios. It also features a loudness radar that allows you to analyze submix, single tracks, full mix, and many more according to several broadcast requirements.

Another nice feature we found impressive with Audition is the DeReverb tool that allows you to eliminate or remove reverberations from the audio file. IT efficiently handles short delays and spacious reverbs in your video and audio files. The sound remover tool is another impressive tool that allows you to remove car alarms, errant bumps, paper shuffling, and other unnecessary sounds from your audio and video file. You also gain access to the music remix tool that allows you to cut new versions of songs without necessarily sending them to the remixer.

You can efficiently adjust the song’s target duration to help you get the perfect fit. You can also customize the splices or favor rhythm elements to ensure the beats remain locked when necessary. All the functions available on Adobe Audition are useful for your audio and video mixes.

Pros

• Strong sound removal, audio restoration, and noise reduction tools
• 100BG cloud storage available for all users
• You can access content and tutorials on how to use the software in the Adobe community
• Various visualization tools
• New loudness meter for streaming services

Cons

• The plans limit the features you have access to
• It doesn’t offer MIDI support

EaseUS Video Mixer

**Compatibility:**Windows

Another excellent audio video mixer you can consider that makes out the list is the EaseUS Video Mixer. Its features go beyond the video editing features and extend to audio-video mixing. It is a mixing software perfect for trimming video clips without limiting the length you can upload.

EaseUS offers a paid plan to access varying advanced filters and effects for your audio and video files. You can also import your files from various storage devices for efficient mixing and editing. The video editing software has a toolbar that gives you direct access to the mixing software. You can split, merge and mix video files as you want. This video mixing software also allows users to speed up or reduce their video speed.

Amongst its unique features is the voiceover feature. A record voiceover button allows you to add a custom voice to your video when you click it. It will include the recording in the video to help you understand how it flows with the video during the preview. The Speech-to-Text feature also allows you to choose the text you want to convert to a sound and automatically include subtitles. You can then mix the video and audio and also trim it appropriately.

Pros

• Hundreds of music tracks you can easily import and mix with video files
• Standard video/audio editing features like acceleration, deacceleration, merging, and splitting
• Ease of use and intuitive interface
• An impressive choice of overlays

Cons

• You can’t export in 1080p when using the free version
• No 4K support
• Edition options are limited when you’re editing raw footage

Logic Pro X

**Compatibility:**Mac

This is one of the best audio video mixers in 2022. It is an Apple product and works as an efficient recording studio where professionals can easily create, edit and mix complex audio and video. This platform allows users to arrange their music files in a single platform in just a few minutes. You can also use the mixing software to capture composition and performances in their highest quality.

One of the top features that Logic Pro X offers users is the Dolby Atmos Support and the availability of over 2000 loops and Apple silicon support. This is in addition to the step sequencer on Login Remote that triggers audio on your iPad. Those who own Airpods understand how impressive Spatial Audio technology is. You can edit your video and audio to feel like you’re at the front of a live gig ow two people are having a conversation right in front of you when listening to a podcast.

It also allows users to export their edited audio and video in Dolby Atmos, which makes the content feel more alive. Its expanded sound library is another impressive feature we love about this tool. There are over 200 instrument and audio patches available with Logic Pro. If you want to mix high-quality songs for various purposes, Logic Pro X is a great fit.

Pros

• You can export your projects to Dolby Atmos
• iOS integration
• users can explore numerous loops, audio patches, and instruments
• You can implement plugins to enhance your audio files

Cons

• You need compatible headphones for Spatial Audio
• The software can lag performance on older PC versions due to its vast size

FL Studio

**Compatibility:**Windows

This is a top audio video mixer for professional song makers and composers looking to create impressive sound clips and music on a single platform. Additionally, there are different production-related features available on the platform. For example, FL Studio offers a full version synth bundle with frequency modulation, subtractive synthesis, and ring modulation. Additionally, it comes with three independent filters, 13 filter types, and some patches were created by deadmau5, amongst others.

The stock plugins in FL Studio can be found within and outside the box, meaning you can install and purchase their preferred DAW. The intuitive workflow of the native plugin is another reason why it is one of the best audio video mixers in 2022. Its main arrangement space is the Playlist, which you can use to sequence patterns of audio and MIDI. In addition, you can mix different audio projects with plugin delay compensation, effect chains, advanced automation, and sidechain control.

Pros

• An extensive number of plugins for users to mix audio project
• Over 100 effects and instruments to master
• Available for Mac and Windows
• Technical support at all times

Cons

• Plan prices tend to increase with updates and added plugins

Audacity

**Compatibility:**Mac and Windows

Another audio video mixer that you can try is Audacity. This open-source mixer allows you to record live sounds with its microphone or built-in mixer. Alternatively, you can import files in various formats or export the recordings all at once or one at a time. You can also edit digitized recordings from your storage device.

This app is also relatively easy to use and navigate. Editing and checking your sound quality with this software is relatively easy to use. It also offers users functions like resampling and dithering to enhance audio and video files.

Pros

• It allows you to cut and merge tracks
• You can easily analyze audio frequencies and use the reports
• New plugins are updated daily
• The spectrogram function provides visuals of sound frequencies

Cons

• Poor UI usability
• Mac version crashes frequently

Alternative Option: Wondershare Filmora

An alternative option that is arguably the best audio video mixer in 2022 is Wondershare Filmora . This top-notch software provides all the tools for efficient video and music editing. Many top-quality features allow editors to use it for their work. With Wondershare Filmore, you can adjust the pitch and speed and analyze various tracks and beats. In addition, Wondershare Filmore also provides audio visualization features that allow editors to remove background noises while editing easily.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Although it offers all the features a professional needs to effectively edit audio and video, it is also ideal for newbies with little to no editing needs. If you want to produce your content quickly, Filmora’s straightforward UI makes it relatively easy. When it comes to features, Filmora isn’t lacking with essential editing tools like zoom, trimming, audio-video mixing, cropping, and many more. It also comes with an AI filter which effectively suggests filters ideal for your video size. Overall, Wondershare remains the best audio video mixer for both beginners and professionals.

Pros

• You can sync audio and video files with a single tap
• There are different varieties of plugins available
• Audio visualizer allows you to spot pitch changes during editing and mixing
• You have access to royalty-free audio tracks and smart templates
• It comes with cloud storage

Cons

• It might be necessary to first upgrade your graphics card on some devices.

How to Mix Audio Video Tracks with Wondershare Filmora

To get started, you have to download Wondershare Filmora on your smartphone. You can download it from the official website. Once you download the Filmora software, install it on your file, and you’re ready to use it for your audio video mixes.

• Launch the software and click ‘new project’ on the welcome page to proceed.
• It will lead you to the editing panel; on the menu bar, click on ‘import media’ and then navigate to the system folder containing the audio files you want to edit.

• Alternatively, you can simply drag and drop the file to the timeline.

• Now, drag the audio and video and audio file to the timeline and place them next to each other.
• You can now make adjustments for each file on the timeline. You can change the length of your files and also change the placements. Wondershare Filmore allows you to slide the files on top of each other or even split the clips.

• You can also edit the audio file by changing the pitch, speed, volume, and other settings.

• Once you’re done editing, click the export tab and choose the format you’ll like to export your audio-video mix. You can also change the name and resolution of the file.
• Once you’re done making the final edits to the file, click the ‘export’ button, which will export your file.

Final Thoughts

The software we reviewed here is a top-quality audio video mixer with many features to take your audio and video files to the next level. Whether you’re a professional editor or a beginner hoping for a quality audio video mix, this software will help you achieve it. The different options here offer unique features, and we provided a list of their pros and cons to help you make the ideal decision for you. If you’re looking for an alternate option, Wondershare Filmore is an all-in-one editing software with several features that allows you to get the best results.

“Pro Audio Tools: An In-Depth Look at REAPER’s Capabilities”

DAW stands for Digital Audio Workstation. It is where you can record, edit, mix or even master your music. You always need good DAW software to help you with the job to produce music or live recording musicians.

A good DAW software must have a multi-track audio recording , virtual instruments, MIDI sequencer, excellent mixing capabilities, and plug-in processor hosting. The software is found for all major operating systems such as Linux , Windows, and Mac. If you want to learn more about DAW, then stay with us. The article will discuss in detail REAPER Recording Software.

In this article

01 What Is REAPER Recording Software?

02 How to Download and Install REAPER Software?

03 Tutorial for Using REAPER Recording Software

Part 1. What Is REAPER Recording Software?

Recording software like REAPER records computer audio is used to produce music, edit it, transform, and customize your music. With REAPER Recording Software , you can record multi-layer audio and MIDI in various formats. REAPER has the easiest interface that allows you to drag and drop to import, split, move and do many other tasks.

This is just one feature of REAPER that sounds very interesting. In this section, we will talk about more of its features.

1. Record and Edit

You can easily record the audio and (MIDI) Musical Instrumental Digital Interface with REAPER recording software. It lets you edit and customize everything. You can record and edit things limitlessly. When it comes to recording, it’s not at all difficult for REAPER software to record various instruments or vocals.

2. Mixing

Initially, the mixer might seem inflexible, but in reality, REAPER has a lot to offer you. It has great automated capabilities for instrument and effect parameters. It doesn’t matter if you are working because you can still bounce or freeze tracks while working.

The mixer is very flexible. With REAPERs mixer, you just have to drag and drop your recordings so that you can create tracks, and also, you can customize the arrangements by moving the portions.

3. Interface

While looking at the interface, you might question yourself about how to use its interface. Some people love to learn about new things, such as the REAPER Recording Software. Whereas, some people seem least interested because the half-empty interface is not intuitive to them.

Whereas, the best thing about its interface is that you can customize it. REAPER allows you to add different wallpapers and layouts to your software interface.

4. Strong Stability

REAPER Recording Software has very strong stability. This is one of its strongest features as compared to other competitors. The RAM is rarely affected by the load time and the used resources. Moreover, the software offers a wide range of languages. You can select your desired language to run the software.

Part 2. How to Download and Install REAPER Software?

REAPER is a Digital Audio Workstation. The perfect platform where you can manipulate and transform your audio. With REAPER Record Computer audio, you can work efficiently in a resource-friendly studio with saving your time. Stay tuned if you plan to learn more about its pricing and requirements.

Pricing of REAPER Software

A reaper is a brilliant software. It has a 60-day trial period. REAPER costs $60 in total to register. It has complete MIDI sequencing. You can also get a discounted license if REAPER is the best private option for you or has commercial usage. You can set the equal license key on every computer for someone with multiple computers.

System Requirements

The recording software has uncountable features. REAPER software facilitates its users at every level by giving the best audio manipulating platform. The best thing about REAPER Recording Software is its compatibility with different operating systems. Let us add more to your knowledge on this.

Windows

REAPER software is available for Windows 7, 8, 10, XP, and Vista. The version of REAPER for Windows is 6.42. This is for Windows 64-bit whereas, a download package is also available for Windows 32-bit.

macOS

For macOS 64-bit, REAPER has a 6.42 version. This version is compatible with macOS 10.5 – 10.14. Whereas, for macOS 10.15+, the available version of REAPER is 6.42 with a 15MB file size.

Linux

REAPER Recording Software is also compatible with Linux x86_64. The REAPER version is 6.42 with an 11 MB file size. This version can also work on AMD64 64-bit.

Downloading and Installing REAPER

Now that REAPER Record Computer Audio has impressed you a lot. You must be thinking about how to download it. If this is on your mind, then we got you. Allow us to share its steps that will guide you to download the software easily.

Step 1: To install REAPER software, first of all, visit its official website. Then locate and head over to its download section.

Step 2: Click on ‘Download REAPER from the download section.’ For Windows users, they can download the Windows installation package. At the same time, Linux and macOS users can select their installation packages.

Step 3: Lastly, after you have downloaded your systems compatible installation package, you simply have to run it and then install it according to your respective operating system.

Part 3. Tutorial for Using REAPER Recording Software

After its attractive features and detailed downloading procedure, it is finally the time to talk about its works. This section of the article will explain to you more about REAPER Recording Software as we are now going to present a tutorial on how to use the software.

Understand the Layout

Understanding and knowing the layout of your software before you start working on it is essential. The crucial components of REAPER software include the Timeline, Arrangement Window, Track Panel, Toolbar, and lastly, Transport.

The Arrangement window holds all the added items. The items are played from left to right order, similar to their timeline arrangement. You can also zoom in and out. Then comes the transport toolbar, which holds the functions to stop, rewind, play, fast forward, adjust the timeline speed, etc. The toolbar holds all the toggle buttons. You can also customize your toolbar.

New Track Creation

For creating a new track on REAPER, go to the Track menu and hit Insert New Track. A track is like another layer to your audio. Multiple layers and tracks make your work complex yet interesting as you can play all the different tracks at the same time. By double-clicking in the Track Control Panel, you can set a name for the added track.

Audio Hardware Settings for Audio Recording

It is best suggested always to check your audio hardware settings before you start to record, edit or mix with REAPER Recording Software. Your primary focus should be on the recording device’s devices should be set as Input Device, whereas the listening device should be set as the Output Device.

For this, you have to select Preferences from the Options menu. A window will appear in front of you, the REAPER Preference window. You have to select the correct Input and Output devices from the dropdown menu from this window.

Arm your Track

Arming your track is very important. For this, head over to the Track Control Panel, and next to your track name, hit the red circle. If you have various tracks, you should solo this track and mute the other tracks.

As soon as the track is armed, a Gain Meter will activate on the side. From this, you can check if you have properly set the microphone or not. This could be tested by tapping on the microphone.

Record

After all, the hardware settings are done, and your track is armed, it’s time to start the recording. For that, just tap on the Record button in the Transport toolbar. A yellow line in the timeline will indicate the end of the recording.

To end the recording, tap on the Stop button from the Transport Toolbar. Lastly, REAPER Recording Software will ask you to save the file. In case you don’t want it, you can also delete it.

Create and Manipulate Clips

Things like manipulation get a lot easier if you split the clips in REAPER. From the items menu, you have to select the option of Split Item on Cursor. This divides your clip into two clips on each side of the cursor. You can also remove the clips by going to the Items Menu. From there, you just have to hit the Remove Item option, or else, simply press the Delete key on your keyboard.

Removing clips will create a gap in the arrangement window that can be filled by dragging forward the remaining clip.

Volume Adjustments – Normalize

By double-clicking on the item or by selecting ‘Item Properties’ from a right-click, you can normalize the item. A new window will appear as Media Item Properties, from where you have to locate the Volume Settings and then select the option of Normalize.

If your item is already loud, then nothing will happen, but if it is not, then the slider will change from 0.00 dB showing an increase in the volume. Lastly, hit the ‘Apply’ or ‘OK’ button to imply the changes.

Fade in/out

With the Media Properties, you can also adjust a Fade in and a Fade out. For this, you simply have to set an end time for the Fade in, whereas a start time is entered for Fade out. Hit the ‘Ok’ or ‘Apply’ button to apply the changes.

From the Arrangement window, fades can be adjusted. For adjusting the fades, hover with your mouse over the red line. You will see a newly shaped cursor. Just drag on the timeline to play and adjust the Fade with this new cursor.

Automate Changes

With REAPER, you can also automate changes in track parameters. We will guide about automation from Track Envelopes. From Track Control Panel, hit the Trim option. A new Envelopes window will open at this point from where you have to check the Volume box.

A new Volume Track will open up. Here, you have to set new Envelope points. That could be done by holding the shift key, right-clicking on the point, and then selecting Create New Point. A green circle will indicate the new point.

By dragging the Envelope point, you can also adjust the volume. Dragging it towards the top will increase the volume, whereas dragging it towards the bottom will eventually decrease.

Finalize the Audio – Render

After all the above steps have been completed to set the order and adjust your desired volume, the last step comes to render your project file. For that, move to the File menu and select the ‘Render’ option. A window will be opened as ‘Render to File.’ Now, from the dropdown menu, select your desired Output Format.

Lastly, hit the Render 1 File button, and then REAPER will export your project. You can immediately listen to it by selecting the ‘Launch File’ option.

Concluding Thoughts

This article is everything you need to learn about REAPER Recording Software. The article that started from an introduction on DAW took you on a roller coaster ride. Everything about REAPER software has been shared.

We hope that this article helps you in all possible ways. The attractive features impress you, and its pricing and system specifications increase your knowledge. Along with that, the shared tutorial will guide you thoroughly on how to use it.

02 How to Download and Install REAPER Software?

03 Tutorial for Using REAPER Recording Software

Part 1. What Is REAPER Recording Software?

Recording software like REAPER records computer audio is used to produce music, edit it, transform, and customize your music. With REAPER Recording Software , you can record multi-layer audio and MIDI in various formats. REAPER has the easiest interface that allows you to drag and drop to import, split, move and do many other tasks.

This is just one feature of REAPER that sounds very interesting. In this section, we will talk about more of its features.

1. Record and Edit

You can easily record the audio and (MIDI) Musical Instrumental Digital Interface with REAPER recording software. It lets you edit and customize everything. You can record and edit things limitlessly. When it comes to recording, it’s not at all difficult for REAPER software to record various instruments or vocals.

2. Mixing

Initially, the mixer might seem inflexible, but in reality, REAPER has a lot to offer you. It has great automated capabilities for instrument and effect parameters. It doesn’t matter if you are working because you can still bounce or freeze tracks while working.

The mixer is very flexible. With REAPERs mixer, you just have to drag and drop your recordings so that you can create tracks, and also, you can customize the arrangements by moving the portions.

3. Interface

While looking at the interface, you might question yourself about how to use its interface. Some people love to learn about new things, such as the REAPER Recording Software. Whereas, some people seem least interested because the half-empty interface is not intuitive to them.

Whereas, the best thing about its interface is that you can customize it. REAPER allows you to add different wallpapers and layouts to your software interface.

4. Strong Stability

REAPER Recording Software has very strong stability. This is one of its strongest features as compared to other competitors. The RAM is rarely affected by the load time and the used resources. Moreover, the software offers a wide range of languages. You can select your desired language to run the software.

Part 2. How to Download and Install REAPER Software?

REAPER is a Digital Audio Workstation. The perfect platform where you can manipulate and transform your audio. With REAPER Record Computer audio, you can work efficiently in a resource-friendly studio with saving your time. Stay tuned if you plan to learn more about its pricing and requirements.

Pricing of REAPER Software

A reaper is a brilliant software. It has a 60-day trial period. REAPER costs $60 in total to register. It has complete MIDI sequencing. You can also get a discounted license if REAPER is the best private option for you or has commercial usage. You can set the equal license key on every computer for someone with multiple computers.

System Requirements

The recording software has uncountable features. REAPER software facilitates its users at every level by giving the best audio manipulating platform. The best thing about REAPER Recording Software is its compatibility with different operating systems. Let us add more to your knowledge on this.

Windows

REAPER software is available for Windows 7, 8, 10, XP, and Vista. The version of REAPER for Windows is 6.42. This is for Windows 64-bit whereas, a download package is also available for Windows 32-bit.

macOS

For macOS 64-bit, REAPER has a 6.42 version. This version is compatible with macOS 10.5 – 10.14. Whereas, for macOS 10.15+, the available version of REAPER is 6.42 with a 15MB file size.

Linux

REAPER Recording Software is also compatible with Linux x86_64. The REAPER version is 6.42 with an 11 MB file size. This version can also work on AMD64 64-bit.

Downloading and Installing REAPER

Now that REAPER Record Computer Audio has impressed you a lot. You must be thinking about how to download it. If this is on your mind, then we got you. Allow us to share its steps that will guide you to download the software easily.

Step 1: To install REAPER software, first of all, visit its official website. Then locate and head over to its download section.

Step 2: Click on ‘Download REAPER from the download section.’ For Windows users, they can download the Windows installation package. At the same time, Linux and macOS users can select their installation packages.

Step 3: Lastly, after you have downloaded your systems compatible installation package, you simply have to run it and then install it according to your respective operating system.

Part 3. Tutorial for Using REAPER Recording Software

After its attractive features and detailed downloading procedure, it is finally the time to talk about its works. This section of the article will explain to you more about REAPER Recording Software as we are now going to present a tutorial on how to use the software.

Understand the Layout

Understanding and knowing the layout of your software before you start working on it is essential. The crucial components of REAPER software include the Timeline, Arrangement Window, Track Panel, Toolbar, and lastly, Transport.

The Arrangement window holds all the added items. The items are played from left to right order, similar to their timeline arrangement. You can also zoom in and out. Then comes the transport toolbar, which holds the functions to stop, rewind, play, fast forward, adjust the timeline speed, etc. The toolbar holds all the toggle buttons. You can also customize your toolbar.

New Track Creation

For creating a new track on REAPER, go to the Track menu and hit Insert New Track. A track is like another layer to your audio. Multiple layers and tracks make your work complex yet interesting as you can play all the different tracks at the same time. By double-clicking in the Track Control Panel, you can set a name for the added track.

Audio Hardware Settings for Audio Recording

It is best suggested always to check your audio hardware settings before you start to record, edit or mix with REAPER Recording Software. Your primary focus should be on the recording device’s devices should be set as Input Device, whereas the listening device should be set as the Output Device.

For this, you have to select Preferences from the Options menu. A window will appear in front of you, the REAPER Preference window. You have to select the correct Input and Output devices from the dropdown menu from this window.

Arm your Track

Arming your track is very important. For this, head over to the Track Control Panel, and next to your track name, hit the red circle. If you have various tracks, you should solo this track and mute the other tracks.

As soon as the track is armed, a Gain Meter will activate on the side. From this, you can check if you have properly set the microphone or not. This could be tested by tapping on the microphone.

Record

After all, the hardware settings are done, and your track is armed, it’s time to start the recording. For that, just tap on the Record button in the Transport toolbar. A yellow line in the timeline will indicate the end of the recording.

To end the recording, tap on the Stop button from the Transport Toolbar. Lastly, REAPER Recording Software will ask you to save the file. In case you don’t want it, you can also delete it.

Create and Manipulate Clips

Things like manipulation get a lot easier if you split the clips in REAPER. From the items menu, you have to select the option of Split Item on Cursor. This divides your clip into two clips on each side of the cursor. You can also remove the clips by going to the Items Menu. From there, you just have to hit the Remove Item option, or else, simply press the Delete key on your keyboard.

Removing clips will create a gap in the arrangement window that can be filled by dragging forward the remaining clip.

Volume Adjustments – Normalize

By double-clicking on the item or by selecting ‘Item Properties’ from a right-click, you can normalize the item. A new window will appear as Media Item Properties, from where you have to locate the Volume Settings and then select the option of Normalize.

If your item is already loud, then nothing will happen, but if it is not, then the slider will change from 0.00 dB showing an increase in the volume. Lastly, hit the ‘Apply’ or ‘OK’ button to imply the changes.

Fade in/out

With the Media Properties, you can also adjust a Fade in and a Fade out. For this, you simply have to set an end time for the Fade in, whereas a start time is entered for Fade out. Hit the ‘Ok’ or ‘Apply’ button to apply the changes.

From the Arrangement window, fades can be adjusted. For adjusting the fades, hover with your mouse over the red line. You will see a newly shaped cursor. Just drag on the timeline to play and adjust the Fade with this new cursor.

Automate Changes

With REAPER, you can also automate changes in track parameters. We will guide about automation from Track Envelopes. From Track Control Panel, hit the Trim option. A new Envelopes window will open at this point from where you have to check the Volume box.

A new Volume Track will open up. Here, you have to set new Envelope points. That could be done by holding the shift key, right-clicking on the point, and then selecting Create New Point. A green circle will indicate the new point.

By dragging the Envelope point, you can also adjust the volume. Dragging it towards the top will increase the volume, whereas dragging it towards the bottom will eventually decrease.

Finalize the Audio – Render

After all the above steps have been completed to set the order and adjust your desired volume, the last step comes to render your project file. For that, move to the File menu and select the ‘Render’ option. A window will be opened as ‘Render to File.’ Now, from the dropdown menu, select your desired Output Format.

Lastly, hit the Render 1 File button, and then REAPER will export your project. You can immediately listen to it by selecting the ‘Launch File’ option.

Concluding Thoughts

This article is everything you need to learn about REAPER Recording Software. The article that started from an introduction on DAW took you on a roller coaster ride. Everything about REAPER software has been shared.

We hope that this article helps you in all possible ways. The attractive features impress you, and its pricing and system specifications increase your knowledge. Along with that, the shared tutorial will guide you thoroughly on how to use it.

02 How to Download and Install REAPER Software?

03 Tutorial for Using REAPER Recording Software

Part 1. What Is REAPER Recording Software?

Recording software like REAPER records computer audio is used to produce music, edit it, transform, and customize your music. With REAPER Recording Software , you can record multi-layer audio and MIDI in various formats. REAPER has the easiest interface that allows you to drag and drop to import, split, move and do many other tasks.

This is just one feature of REAPER that sounds very interesting. In this section, we will talk about more of its features.

1. Record and Edit

You can easily record the audio and (MIDI) Musical Instrumental Digital Interface with REAPER recording software. It lets you edit and customize everything. You can record and edit things limitlessly. When it comes to recording, it’s not at all difficult for REAPER software to record various instruments or vocals.

2. Mixing

Initially, the mixer might seem inflexible, but in reality, REAPER has a lot to offer you. It has great automated capabilities for instrument and effect parameters. It doesn’t matter if you are working because you can still bounce or freeze tracks while working.

The mixer is very flexible. With REAPERs mixer, you just have to drag and drop your recordings so that you can create tracks, and also, you can customize the arrangements by moving the portions.

3. Interface

While looking at the interface, you might question yourself about how to use its interface. Some people love to learn about new things, such as the REAPER Recording Software. Whereas, some people seem least interested because the half-empty interface is not intuitive to them.

Whereas, the best thing about its interface is that you can customize it. REAPER allows you to add different wallpapers and layouts to your software interface.

4. Strong Stability

REAPER Recording Software has very strong stability. This is one of its strongest features as compared to other competitors. The RAM is rarely affected by the load time and the used resources. Moreover, the software offers a wide range of languages. You can select your desired language to run the software.

Part 2. How to Download and Install REAPER Software?

REAPER is a Digital Audio Workstation. The perfect platform where you can manipulate and transform your audio. With REAPER Record Computer audio, you can work efficiently in a resource-friendly studio with saving your time. Stay tuned if you plan to learn more about its pricing and requirements.

Pricing of REAPER Software

A reaper is a brilliant software. It has a 60-day trial period. REAPER costs $60 in total to register. It has complete MIDI sequencing. You can also get a discounted license if REAPER is the best private option for you or has commercial usage. You can set the equal license key on every computer for someone with multiple computers.

System Requirements

The recording software has uncountable features. REAPER software facilitates its users at every level by giving the best audio manipulating platform. The best thing about REAPER Recording Software is its compatibility with different operating systems. Let us add more to your knowledge on this.

Windows

REAPER software is available for Windows 7, 8, 10, XP, and Vista. The version of REAPER for Windows is 6.42. This is for Windows 64-bit whereas, a download package is also available for Windows 32-bit.

macOS

For macOS 64-bit, REAPER has a 6.42 version. This version is compatible with macOS 10.5 – 10.14. Whereas, for macOS 10.15+, the available version of REAPER is 6.42 with a 15MB file size.

Linux

REAPER Recording Software is also compatible with Linux x86_64. The REAPER version is 6.42 with an 11 MB file size. This version can also work on AMD64 64-bit.

Downloading and Installing REAPER

Now that REAPER Record Computer Audio has impressed you a lot. You must be thinking about how to download it. If this is on your mind, then we got you. Allow us to share its steps that will guide you to download the software easily.

Step 1: To install REAPER software, first of all, visit its official website. Then locate and head over to its download section.

Step 2: Click on ‘Download REAPER from the download section.’ For Windows users, they can download the Windows installation package. At the same time, Linux and macOS users can select their installation packages.

Step 3: Lastly, after you have downloaded your systems compatible installation package, you simply have to run it and then install it according to your respective operating system.

Part 3. Tutorial for Using REAPER Recording Software

After its attractive features and detailed downloading procedure, it is finally the time to talk about its works. This section of the article will explain to you more about REAPER Recording Software as we are now going to present a tutorial on how to use the software.

Understand the Layout

Understanding and knowing the layout of your software before you start working on it is essential. The crucial components of REAPER software include the Timeline, Arrangement Window, Track Panel, Toolbar, and lastly, Transport.

The Arrangement window holds all the added items. The items are played from left to right order, similar to their timeline arrangement. You can also zoom in and out. Then comes the transport toolbar, which holds the functions to stop, rewind, play, fast forward, adjust the timeline speed, etc. The toolbar holds all the toggle buttons. You can also customize your toolbar.

New Track Creation

For creating a new track on REAPER, go to the Track menu and hit Insert New Track. A track is like another layer to your audio. Multiple layers and tracks make your work complex yet interesting as you can play all the different tracks at the same time. By double-clicking in the Track Control Panel, you can set a name for the added track.

Audio Hardware Settings for Audio Recording

It is best suggested always to check your audio hardware settings before you start to record, edit or mix with REAPER Recording Software. Your primary focus should be on the recording device’s devices should be set as Input Device, whereas the listening device should be set as the Output Device.

For this, you have to select Preferences from the Options menu. A window will appear in front of you, the REAPER Preference window. You have to select the correct Input and Output devices from the dropdown menu from this window.

Arm your Track

Arming your track is very important. For this, head over to the Track Control Panel, and next to your track name, hit the red circle. If you have various tracks, you should solo this track and mute the other tracks.

As soon as the track is armed, a Gain Meter will activate on the side. From this, you can check if you have properly set the microphone or not. This could be tested by tapping on the microphone.

Record

After all, the hardware settings are done, and your track is armed, it’s time to start the recording. For that, just tap on the Record button in the Transport toolbar. A yellow line in the timeline will indicate the end of the recording.

To end the recording, tap on the Stop button from the Transport Toolbar. Lastly, REAPER Recording Software will ask you to save the file. In case you don’t want it, you can also delete it.

Create and Manipulate Clips

Things like manipulation get a lot easier if you split the clips in REAPER. From the items menu, you have to select the option of Split Item on Cursor. This divides your clip into two clips on each side of the cursor. You can also remove the clips by going to the Items Menu. From there, you just have to hit the Remove Item option, or else, simply press the Delete key on your keyboard.

Removing clips will create a gap in the arrangement window that can be filled by dragging forward the remaining clip.

Volume Adjustments – Normalize

By double-clicking on the item or by selecting ‘Item Properties’ from a right-click, you can normalize the item. A new window will appear as Media Item Properties, from where you have to locate the Volume Settings and then select the option of Normalize.

If your item is already loud, then nothing will happen, but if it is not, then the slider will change from 0.00 dB showing an increase in the volume. Lastly, hit the ‘Apply’ or ‘OK’ button to imply the changes.

Fade in/out

With the Media Properties, you can also adjust a Fade in and a Fade out. For this, you simply have to set an end time for the Fade in, whereas a start time is entered for Fade out. Hit the ‘Ok’ or ‘Apply’ button to apply the changes.

From the Arrangement window, fades can be adjusted. For adjusting the fades, hover with your mouse over the red line. You will see a newly shaped cursor. Just drag on the timeline to play and adjust the Fade with this new cursor.

Automate Changes

With REAPER, you can also automate changes in track parameters. We will guide about automation from Track Envelopes. From Track Control Panel, hit the Trim option. A new Envelopes window will open at this point from where you have to check the Volume box.

A new Volume Track will open up. Here, you have to set new Envelope points. That could be done by holding the shift key, right-clicking on the point, and then selecting Create New Point. A green circle will indicate the new point.

By dragging the Envelope point, you can also adjust the volume. Dragging it towards the top will increase the volume, whereas dragging it towards the bottom will eventually decrease.

Finalize the Audio – Render

After all the above steps have been completed to set the order and adjust your desired volume, the last step comes to render your project file. For that, move to the File menu and select the ‘Render’ option. A window will be opened as ‘Render to File.’ Now, from the dropdown menu, select your desired Output Format.

Lastly, hit the Render 1 File button, and then REAPER will export your project. You can immediately listen to it by selecting the ‘Launch File’ option.

Concluding Thoughts

This article is everything you need to learn about REAPER Recording Software. The article that started from an introduction on DAW took you on a roller coaster ride. Everything about REAPER software has been shared.

We hope that this article helps you in all possible ways. The attractive features impress you, and its pricing and system specifications increase your knowledge. Along with that, the shared tutorial will guide you thoroughly on how to use it.

02 How to Download and Install REAPER Software?

03 Tutorial for Using REAPER Recording Software

Part 1. What Is REAPER Recording Software?

Recording software like REAPER records computer audio is used to produce music, edit it, transform, and customize your music. With REAPER Recording Software , you can record multi-layer audio and MIDI in various formats. REAPER has the easiest interface that allows you to drag and drop to import, split, move and do many other tasks.

This is just one feature of REAPER that sounds very interesting. In this section, we will talk about more of its features.

1. Record and Edit

You can easily record the audio and (MIDI) Musical Instrumental Digital Interface with REAPER recording software. It lets you edit and customize everything. You can record and edit things limitlessly. When it comes to recording, it’s not at all difficult for REAPER software to record various instruments or vocals.

2. Mixing

Initially, the mixer might seem inflexible, but in reality, REAPER has a lot to offer you. It has great automated capabilities for instrument and effect parameters. It doesn’t matter if you are working because you can still bounce or freeze tracks while working.

The mixer is very flexible. With REAPERs mixer, you just have to drag and drop your recordings so that you can create tracks, and also, you can customize the arrangements by moving the portions.

3. Interface

While looking at the interface, you might question yourself about how to use its interface. Some people love to learn about new things, such as the REAPER Recording Software. Whereas, some people seem least interested because the half-empty interface is not intuitive to them.

Whereas, the best thing about its interface is that you can customize it. REAPER allows you to add different wallpapers and layouts to your software interface.

4. Strong Stability

REAPER Recording Software has very strong stability. This is one of its strongest features as compared to other competitors. The RAM is rarely affected by the load time and the used resources. Moreover, the software offers a wide range of languages. You can select your desired language to run the software.

Part 2. How to Download and Install REAPER Software?

REAPER is a Digital Audio Workstation. The perfect platform where you can manipulate and transform your audio. With REAPER Record Computer audio, you can work efficiently in a resource-friendly studio with saving your time. Stay tuned if you plan to learn more about its pricing and requirements.

Pricing of REAPER Software

A reaper is a brilliant software. It has a 60-day trial period. REAPER costs $60 in total to register. It has complete MIDI sequencing. You can also get a discounted license if REAPER is the best private option for you or has commercial usage. You can set the equal license key on every computer for someone with multiple computers.

System Requirements

The recording software has uncountable features. REAPER software facilitates its users at every level by giving the best audio manipulating platform. The best thing about REAPER Recording Software is its compatibility with different operating systems. Let us add more to your knowledge on this.

Windows

REAPER software is available for Windows 7, 8, 10, XP, and Vista. The version of REAPER for Windows is 6.42. This is for Windows 64-bit whereas, a download package is also available for Windows 32-bit.

macOS

For macOS 64-bit, REAPER has a 6.42 version. This version is compatible with macOS 10.5 – 10.14. Whereas, for macOS 10.15+, the available version of REAPER is 6.42 with a 15MB file size.

Linux

REAPER Recording Software is also compatible with Linux x86_64. The REAPER version is 6.42 with an 11 MB file size. This version can also work on AMD64 64-bit.

Downloading and Installing REAPER

Now that REAPER Record Computer Audio has impressed you a lot. You must be thinking about how to download it. If this is on your mind, then we got you. Allow us to share its steps that will guide you to download the software easily.

Step 1: To install REAPER software, first of all, visit its official website. Then locate and head over to its download section.

Step 2: Click on ‘Download REAPER from the download section.’ For Windows users, they can download the Windows installation package. At the same time, Linux and macOS users can select their installation packages.

Step 3: Lastly, after you have downloaded your systems compatible installation package, you simply have to run it and then install it according to your respective operating system.

Part 3. Tutorial for Using REAPER Recording Software

After its attractive features and detailed downloading procedure, it is finally the time to talk about its works. This section of the article will explain to you more about REAPER Recording Software as we are now going to present a tutorial on how to use the software.

Understand the Layout

Understanding and knowing the layout of your software before you start working on it is essential. The crucial components of REAPER software include the Timeline, Arrangement Window, Track Panel, Toolbar, and lastly, Transport.

The Arrangement window holds all the added items. The items are played from left to right order, similar to their timeline arrangement. You can also zoom in and out. Then comes the transport toolbar, which holds the functions to stop, rewind, play, fast forward, adjust the timeline speed, etc. The toolbar holds all the toggle buttons. You can also customize your toolbar.

New Track Creation

For creating a new track on REAPER, go to the Track menu and hit Insert New Track. A track is like another layer to your audio. Multiple layers and tracks make your work complex yet interesting as you can play all the different tracks at the same time. By double-clicking in the Track Control Panel, you can set a name for the added track.

Audio Hardware Settings for Audio Recording

It is best suggested always to check your audio hardware settings before you start to record, edit or mix with REAPER Recording Software. Your primary focus should be on the recording device’s devices should be set as Input Device, whereas the listening device should be set as the Output Device.

For this, you have to select Preferences from the Options menu. A window will appear in front of you, the REAPER Preference window. You have to select the correct Input and Output devices from the dropdown menu from this window.

Arm your Track

Arming your track is very important. For this, head over to the Track Control Panel, and next to your track name, hit the red circle. If you have various tracks, you should solo this track and mute the other tracks.

As soon as the track is armed, a Gain Meter will activate on the side. From this, you can check if you have properly set the microphone or not. This could be tested by tapping on the microphone.

Record

After all, the hardware settings are done, and your track is armed, it’s time to start the recording. For that, just tap on the Record button in the Transport toolbar. A yellow line in the timeline will indicate the end of the recording.

To end the recording, tap on the Stop button from the Transport Toolbar. Lastly, REAPER Recording Software will ask you to save the file. In case you don’t want it, you can also delete it.

Create and Manipulate Clips

Things like manipulation get a lot easier if you split the clips in REAPER. From the items menu, you have to select the option of Split Item on Cursor. This divides your clip into two clips on each side of the cursor. You can also remove the clips by going to the Items Menu. From there, you just have to hit the Remove Item option, or else, simply press the Delete key on your keyboard.

Removing clips will create a gap in the arrangement window that can be filled by dragging forward the remaining clip.

Volume Adjustments – Normalize

By double-clicking on the item or by selecting ‘Item Properties’ from a right-click, you can normalize the item. A new window will appear as Media Item Properties, from where you have to locate the Volume Settings and then select the option of Normalize.

If your item is already loud, then nothing will happen, but if it is not, then the slider will change from 0.00 dB showing an increase in the volume. Lastly, hit the ‘Apply’ or ‘OK’ button to imply the changes.

Fade in/out

With the Media Properties, you can also adjust a Fade in and a Fade out. For this, you simply have to set an end time for the Fade in, whereas a start time is entered for Fade out. Hit the ‘Ok’ or ‘Apply’ button to apply the changes.

From the Arrangement window, fades can be adjusted. For adjusting the fades, hover with your mouse over the red line. You will see a newly shaped cursor. Just drag on the timeline to play and adjust the Fade with this new cursor.

Automate Changes

With REAPER, you can also automate changes in track parameters. We will guide about automation from Track Envelopes. From Track Control Panel, hit the Trim option. A new Envelopes window will open at this point from where you have to check the Volume box.

A new Volume Track will open up. Here, you have to set new Envelope points. That could be done by holding the shift key, right-clicking on the point, and then selecting Create New Point. A green circle will indicate the new point.

By dragging the Envelope point, you can also adjust the volume. Dragging it towards the top will increase the volume, whereas dragging it towards the bottom will eventually decrease.

Finalize the Audio – Render

After all the above steps have been completed to set the order and adjust your desired volume, the last step comes to render your project file. For that, move to the File menu and select the ‘Render’ option. A window will be opened as ‘Render to File.’ Now, from the dropdown menu, select your desired Output Format.

Lastly, hit the Render 1 File button, and then REAPER will export your project. You can immediately listen to it by selecting the ‘Launch File’ option.

Concluding Thoughts

This article is everything you need to learn about REAPER Recording Software. The article that started from an introduction on DAW took you on a roller coaster ride. Everything about REAPER software has been shared.

We hope that this article helps you in all possible ways. The attractive features impress you, and its pricing and system specifications increase your knowledge. Along with that, the shared tutorial will guide you thoroughly on how to use it.

Expert Strategies for Clearer Dialogue and Ambiance in iMovie Projects

All You Need to Know About iMovie Audio Editing

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Also read: