Troubleshooting Sound Quality: Strategies for Easing Audio Deformation

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

“Three Easy, Cost-Free Strategies to Improve Audio Quality in Your Digital Projects”

The audio or music of video can dramatically affect our perception of a video – no matter whether it’s a home movie, a commercial, or a video presentation. But what if all you have is silent footage or with just a crackled and distorted audio file that needs to be replaced, and at this time, you want to add a sound to the video?

To solve this problem, I humbly recommend Wondershare Filmora . With it, you can easily add audio to video, record the voiceover directly and add it to video, or replace the original audio track (stream) with a new audio file.

In case you want to add music to video with some online tools, please leave a comment below so I can test some online solutions and share with you the best online tools to add audio to video free. I recommend Filmora because its requirement on the network isn’t so high compared to the online tools.

Below is a creative way of adding sound effects to video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

“Separating Sounds From Visuals: MP4 to Audioclip”

While editing an MP4 (MPEG/MPG) clip, we may want to remove audio from the MP4 file completely instead of muting the audio and getting only the video stream as an output.

Sometimes we may want to remove audio from the original file and add a new sound tracker.

To help finish this task, Wondershare Filmora is the right choice. With it, you can either delete all audio tracks completely from MP4 to get the video with no audio in it at all. Or remove an extra audio track and only keep the one you like.

The following article will introduce a simple way of removing audio from video in whatever situation.

MP4 Audio Remover - Wondershare Filmora

Why Choose Wondershare Filmora

• Completely remove the audio from video to keep video-only stream;
• Or mute the audio of the video;
• Easily trim/crop/rotate video files on the timeline;
• Add effect/subtitle/watermark to enrich your video;
• Save and play your video on different devices, burn to DVD or upload online;
• Supported OS: Windows & Mac (above 10.11).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import your MP4 file

Free download the audio track remover- Video Editor, install, and run it. Then the following interface will pop up. Click the “Import” button to add the video file you want to remove audio tracks.

Step 2: Remove audio from the file

Drag-n-drop the mp4 file to the timeline, right-click and choose “Detach Audio” to detach the audio tracks from the original mp4 file. Then the separated audio track will appear in the Audio Timeline. You can right-click the audio and choose “Delete” to remove audio from mp4.

Note: if you want to add the new sound tracker, import the sound recordings you want to the media library and drag them to the audio timeline.

Step 3: Save the edited video

After that, hit “Export” to select the desired output way. You can set the output video format the same as the original one or set the output video format to any other video formats. Then click the “Export” button to export the video. What’s more, you can save the edited file to iPhone, iPad PSP, etc., or directly upload it to YouTube for sharing with friends.

Bonus: Mute a Video with Filmora Video Editor with 1-click

Sometimes, you might wish to mute a video clip for many reasons, then the Filmora Video Editor, as the best MP4 Audio Extractor or Editor will help you do it with 1 simple click.

To reach it, you only need to drag and drop your targeted MP4 video into the timeline, and then, right-click on it and choose “Mute“ option. Then, click “Export” to export and save the edited videos.

Conclusion

Now, it’s your turn to have a try. Above are the steps to remove audio from video. Leave a comment to let us know if you have any questions.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import your MP4 file

Free download the audio track remover- Video Editor, install, and run it. Then the following interface will pop up. Click the “Import” button to add the video file you want to remove audio tracks.

Step 2: Remove audio from the file

Drag-n-drop the mp4 file to the timeline, right-click and choose “Detach Audio” to detach the audio tracks from the original mp4 file. Then the separated audio track will appear in the Audio Timeline. You can right-click the audio and choose “Delete” to remove audio from mp4.

Note: if you want to add the new sound tracker, import the sound recordings you want to the media library and drag them to the audio timeline.

Step 3: Save the edited video

After that, hit “Export” to select the desired output way. You can set the output video format the same as the original one or set the output video format to any other video formats. Then click the “Export” button to export the video. What’s more, you can save the edited file to iPhone, iPad PSP, etc., or directly upload it to YouTube for sharing with friends.

Bonus: Mute a Video with Filmora Video Editor with 1-click

Sometimes, you might wish to mute a video clip for many reasons, then the Filmora Video Editor, as the best MP4 Audio Extractor or Editor will help you do it with 1 simple click.

To reach it, you only need to drag and drop your targeted MP4 video into the timeline, and then, right-click on it and choose “Mute“ option. Then, click “Export” to export and save the edited videos.

Conclusion

Now, it’s your turn to have a try. Above are the steps to remove audio from video. Leave a comment to let us know if you have any questions.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import your MP4 file

Free download the audio track remover- Video Editor, install, and run it. Then the following interface will pop up. Click the “Import” button to add the video file you want to remove audio tracks.

Step 2: Remove audio from the file

Drag-n-drop the mp4 file to the timeline, right-click and choose “Detach Audio” to detach the audio tracks from the original mp4 file. Then the separated audio track will appear in the Audio Timeline. You can right-click the audio and choose “Delete” to remove audio from mp4.

Note: if you want to add the new sound tracker, import the sound recordings you want to the media library and drag them to the audio timeline.

Step 3: Save the edited video

After that, hit “Export” to select the desired output way. You can set the output video format the same as the original one or set the output video format to any other video formats. Then click the “Export” button to export the video. What’s more, you can save the edited file to iPhone, iPad PSP, etc., or directly upload it to YouTube for sharing with friends.

Bonus: Mute a Video with Filmora Video Editor with 1-click

Sometimes, you might wish to mute a video clip for many reasons, then the Filmora Video Editor, as the best MP4 Audio Extractor or Editor will help you do it with 1 simple click.

To reach it, you only need to drag and drop your targeted MP4 video into the timeline, and then, right-click on it and choose “Mute“ option. Then, click “Export” to export and save the edited videos.

Conclusion

Now, it’s your turn to have a try. Above are the steps to remove audio from video. Leave a comment to let us know if you have any questions.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import your MP4 file

Free download the audio track remover- Video Editor, install, and run it. Then the following interface will pop up. Click the “Import” button to add the video file you want to remove audio tracks.

Step 2: Remove audio from the file

Drag-n-drop the mp4 file to the timeline, right-click and choose “Detach Audio” to detach the audio tracks from the original mp4 file. Then the separated audio track will appear in the Audio Timeline. You can right-click the audio and choose “Delete” to remove audio from mp4.

Note: if you want to add the new sound tracker, import the sound recordings you want to the media library and drag them to the audio timeline.

Step 3: Save the edited video

After that, hit “Export” to select the desired output way. You can set the output video format the same as the original one or set the output video format to any other video formats. Then click the “Export” button to export the video. What’s more, you can save the edited file to iPhone, iPad PSP, etc., or directly upload it to YouTube for sharing with friends.

Bonus: Mute a Video with Filmora Video Editor with 1-click

Sometimes, you might wish to mute a video clip for many reasons, then the Filmora Video Editor, as the best MP4 Audio Extractor or Editor will help you do it with 1 simple click.

To reach it, you only need to drag and drop your targeted MP4 video into the timeline, and then, right-click on it and choose “Mute“ option. Then, click “Export” to export and save the edited videos.

Conclusion

Now, it’s your turn to have a try. Above are the steps to remove audio from video. Leave a comment to let us know if you have any questions.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Also read: