“A Step-by-Step Process to Remove Audio in MP4 Videos “

While editing an MP4 (MPEG/MPG) clip, we may want to remove audio from the MP4 file completely instead of muting the audio and getting only the video stream as an output.

Sometimes we may want to remove audio from the original file and add a new sound tracker.

To help finish this task, Wondershare Filmora is the right choice. With it, you can either delete all audio tracks completely from MP4 to get the video with no audio in it at all. Or remove an extra audio track and only keep the one you like.

The following article will introduce a simple way of removing audio from video in whatever situation.

MP4 Audio Remover - Wondershare Filmora

Why Choose Wondershare Filmora

• Completely remove the audio from video to keep video-only stream;
• Or mute the audio of the video;
• Easily trim/crop/rotate video files on the timeline;
• Add effect/subtitle/watermark to enrich your video;
• Save and play your video on different devices, burn to DVD or upload online;
• Supported OS: Windows & Mac (above 10.11).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import your MP4 file

Free download the audio track remover- Video Editor, install, and run it. Then the following interface will pop up. Click the “Import” button to add the video file you want to remove audio tracks.

Step 2: Remove audio from the file

Drag-n-drop the mp4 file to the timeline, right-click and choose “Detach Audio” to detach the audio tracks from the original mp4 file. Then the separated audio track will appear in the Audio Timeline. You can right-click the audio and choose “Delete” to remove audio from mp4.

Note: if you want to add the new sound tracker, import the sound recordings you want to the media library and drag them to the audio timeline.

Step 3: Save the edited video

After that, hit “Export” to select the desired output way. You can set the output video format the same as the original one or set the output video format to any other video formats. Then click the “Export” button to export the video. What’s more, you can save the edited file to iPhone, iPad PSP, etc., or directly upload it to YouTube for sharing with friends.

Bonus: Mute a Video with Filmora Video Editor with 1-click

Sometimes, you might wish to mute a video clip for many reasons, then the Filmora Video Editor, as the best MP4 Audio Extractor or Editor will help you do it with 1 simple click.

To reach it, you only need to drag and drop your targeted MP4 video into the timeline, and then, right-click on it and choose “Mute“ option. Then, click “Export” to export and save the edited videos.

Conclusion

Now, it’s your turn to have a try. Above are the steps to remove audio from video. Leave a comment to let us know if you have any questions.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import your MP4 file

Free download the audio track remover- Video Editor, install, and run it. Then the following interface will pop up. Click the “Import” button to add the video file you want to remove audio tracks.

Step 2: Remove audio from the file

Drag-n-drop the mp4 file to the timeline, right-click and choose “Detach Audio” to detach the audio tracks from the original mp4 file. Then the separated audio track will appear in the Audio Timeline. You can right-click the audio and choose “Delete” to remove audio from mp4.

Note: if you want to add the new sound tracker, import the sound recordings you want to the media library and drag them to the audio timeline.

Step 3: Save the edited video

After that, hit “Export” to select the desired output way. You can set the output video format the same as the original one or set the output video format to any other video formats. Then click the “Export” button to export the video. What’s more, you can save the edited file to iPhone, iPad PSP, etc., or directly upload it to YouTube for sharing with friends.

Bonus: Mute a Video with Filmora Video Editor with 1-click

Sometimes, you might wish to mute a video clip for many reasons, then the Filmora Video Editor, as the best MP4 Audio Extractor or Editor will help you do it with 1 simple click.

To reach it, you only need to drag and drop your targeted MP4 video into the timeline, and then, right-click on it and choose “Mute“ option. Then, click “Export” to export and save the edited videos.

Conclusion

Now, it’s your turn to have a try. Above are the steps to remove audio from video. Leave a comment to let us know if you have any questions.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import your MP4 file

Free download the audio track remover- Video Editor, install, and run it. Then the following interface will pop up. Click the “Import” button to add the video file you want to remove audio tracks.

Step 2: Remove audio from the file

Drag-n-drop the mp4 file to the timeline, right-click and choose “Detach Audio” to detach the audio tracks from the original mp4 file. Then the separated audio track will appear in the Audio Timeline. You can right-click the audio and choose “Delete” to remove audio from mp4.

Note: if you want to add the new sound tracker, import the sound recordings you want to the media library and drag them to the audio timeline.

Step 3: Save the edited video

After that, hit “Export” to select the desired output way. You can set the output video format the same as the original one or set the output video format to any other video formats. Then click the “Export” button to export the video. What’s more, you can save the edited file to iPhone, iPad PSP, etc., or directly upload it to YouTube for sharing with friends.

Bonus: Mute a Video with Filmora Video Editor with 1-click

Sometimes, you might wish to mute a video clip for many reasons, then the Filmora Video Editor, as the best MP4 Audio Extractor or Editor will help you do it with 1 simple click.

To reach it, you only need to drag and drop your targeted MP4 video into the timeline, and then, right-click on it and choose “Mute“ option. Then, click “Export” to export and save the edited videos.

Conclusion

Now, it’s your turn to have a try. Above are the steps to remove audio from video. Leave a comment to let us know if you have any questions.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Import your MP4 file

Free download the audio track remover- Video Editor, install, and run it. Then the following interface will pop up. Click the “Import” button to add the video file you want to remove audio tracks.

Step 2: Remove audio from the file

Drag-n-drop the mp4 file to the timeline, right-click and choose “Detach Audio” to detach the audio tracks from the original mp4 file. Then the separated audio track will appear in the Audio Timeline. You can right-click the audio and choose “Delete” to remove audio from mp4.

Note: if you want to add the new sound tracker, import the sound recordings you want to the media library and drag them to the audio timeline.

Step 3: Save the edited video

After that, hit “Export” to select the desired output way. You can set the output video format the same as the original one or set the output video format to any other video formats. Then click the “Export” button to export the video. What’s more, you can save the edited file to iPhone, iPad PSP, etc., or directly upload it to YouTube for sharing with friends.

Bonus: Mute a Video with Filmora Video Editor with 1-click

Sometimes, you might wish to mute a video clip for many reasons, then the Filmora Video Editor, as the best MP4 Audio Extractor or Editor will help you do it with 1 simple click.

To reach it, you only need to drag and drop your targeted MP4 video into the timeline, and then, right-click on it and choose “Mute“ option. Then, click “Export” to export and save the edited videos.

Conclusion

Now, it’s your turn to have a try. Above are the steps to remove audio from video. Leave a comment to let us know if you have any questions.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Mastering Tempo Adjustments: Aligning Audio and Visuals in FCPX [2023 Edition]

How to Edit the Beat and Sync Videos to Music in Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

The Essential Guide to Recording Dynamic Digital Audio Broadcasts

How to Capture Streaming Audio

Shanoon Cox

Mar 27, 2024• Proven solutions

Most of the gamers these days are searching for tools that can help them to capture the audio stream while recording their on-screen performance. However, there are unlimited software available over the internet to handle such needs but careful selection of the most trustworthy tool is essential to ensure quality results. The article below contains details about some of the best tools along with associated recording procedures, keep reading to avail complete information.

• Method 1: Free Software Available Online
• Method 2: Use Paid Software for Pro Recorders

Method 1: Free Software Available Online

Ezvid screen recording tool is capable enough to record every minute activity on your screen while extended support to audio content. It can help users to develop instructional videos for their gameplays. Follow these steps to get the best results:

Step 1: First of all you need to download version 0.8.1.0 of Ezvid Free Screen Recorder.

Step 2: Get it installed on your system.

Step 3: Now double click on the Ezvid icon available on your desktop and it will immediately prompt you with the interface of Ezvid.

Step 4: Hit the “Capture Screen” option and it will begin a countdown timer on your screen. After counting up to only 3 seconds it will automatically begin the recording task.

Step 5: As soon as your project gets finished, simply hit the “Stop” button recorded clip will be moved to the timeline for the editing process.

Step 6: Hit the record voice icon available on the timeline and start your audio instructions.

Step 7: In case if you want to record background music then Ezvid will assist you to make selection for your song.

Step 8: It is also possible to slow down or speed up videos as per need.

Step 9: Now you can use drag and drop features to rearrange clips in the desired sequence.

Step 10: In order to add text to your clips you can use the “Add Text” option. One can also adjust style, font and color for the background.

Step 11: Hit the Upload to YouTube button to make your content visible online.

Method 2: Use Paid Software for Pro Recorders

For professional Recorders who want to access high-end features, Wondershare Filmora is the best choice. You need to follow these simple steps to record PC screen with this advanced tool:

Step 1: First of all you need to download Wondershare Fimora from its official website.

Step 2: Install this software on your system and launch it with full feature mode.

Step 3: Now hit the “Record PC Screen” option that is available under the “record” button.

Step 4: Users can make selections out of three different screen selection options: Custom, Target, and Full Window.

Step 5: If you want to record audio signal too then hit Microphone audio on or off settings as per need.

Step 6: Hit the REC option to begin the recording process.

Step 7: Hit F9 when the software finishes its countdown from 5 to 1.

Step 8: It is also possible to customized hotkeys for an immediate start and stop button access.

Step 9: This software tool saves the recorded videos in a media library where you can find it with ease for further needs.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Most of the gamers these days are searching for tools that can help them to capture the audio stream while recording their on-screen performance. However, there are unlimited software available over the internet to handle such needs but careful selection of the most trustworthy tool is essential to ensure quality results. The article below contains details about some of the best tools along with associated recording procedures, keep reading to avail complete information.

• Method 1: Free Software Available Online
• Method 2: Use Paid Software for Pro Recorders

Method 1: Free Software Available Online

Ezvid screen recording tool is capable enough to record every minute activity on your screen while extended support to audio content. It can help users to develop instructional videos for their gameplays. Follow these steps to get the best results:

Step 1: First of all you need to download version 0.8.1.0 of Ezvid Free Screen Recorder.

Step 2: Get it installed on your system.

Step 3: Now double click on the Ezvid icon available on your desktop and it will immediately prompt you with the interface of Ezvid.

Step 4: Hit the “Capture Screen” option and it will begin a countdown timer on your screen. After counting up to only 3 seconds it will automatically begin the recording task.

Step 5: As soon as your project gets finished, simply hit the “Stop” button recorded clip will be moved to the timeline for the editing process.

Step 6: Hit the record voice icon available on the timeline and start your audio instructions.

Step 7: In case if you want to record background music then Ezvid will assist you to make selection for your song.

Step 8: It is also possible to slow down or speed up videos as per need.

Step 9: Now you can use drag and drop features to rearrange clips in the desired sequence.

Step 10: In order to add text to your clips you can use the “Add Text” option. One can also adjust style, font and color for the background.

Step 11: Hit the Upload to YouTube button to make your content visible online.

Method 2: Use Paid Software for Pro Recorders

For professional Recorders who want to access high-end features, Wondershare Filmora is the best choice. You need to follow these simple steps to record PC screen with this advanced tool:

Step 1: First of all you need to download Wondershare Fimora from its official website.

Step 2: Install this software on your system and launch it with full feature mode.

Step 3: Now hit the “Record PC Screen” option that is available under the “record” button.

Step 4: Users can make selections out of three different screen selection options: Custom, Target, and Full Window.

Step 5: If you want to record audio signal too then hit Microphone audio on or off settings as per need.

Step 6: Hit the REC option to begin the recording process.

Step 7: Hit F9 when the software finishes its countdown from 5 to 1.

Step 8: It is also possible to customized hotkeys for an immediate start and stop button access.

Step 9: This software tool saves the recorded videos in a media library where you can find it with ease for further needs.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Most of the gamers these days are searching for tools that can help them to capture the audio stream while recording their on-screen performance. However, there are unlimited software available over the internet to handle such needs but careful selection of the most trustworthy tool is essential to ensure quality results. The article below contains details about some of the best tools along with associated recording procedures, keep reading to avail complete information.

• Method 1: Free Software Available Online
• Method 2: Use Paid Software for Pro Recorders

Method 1: Free Software Available Online

Ezvid screen recording tool is capable enough to record every minute activity on your screen while extended support to audio content. It can help users to develop instructional videos for their gameplays. Follow these steps to get the best results:

Step 1: First of all you need to download version 0.8.1.0 of Ezvid Free Screen Recorder.

Step 2: Get it installed on your system.

Step 3: Now double click on the Ezvid icon available on your desktop and it will immediately prompt you with the interface of Ezvid.

Step 4: Hit the “Capture Screen” option and it will begin a countdown timer on your screen. After counting up to only 3 seconds it will automatically begin the recording task.

Step 5: As soon as your project gets finished, simply hit the “Stop” button recorded clip will be moved to the timeline for the editing process.

Step 6: Hit the record voice icon available on the timeline and start your audio instructions.

Step 7: In case if you want to record background music then Ezvid will assist you to make selection for your song.

Step 8: It is also possible to slow down or speed up videos as per need.

Step 9: Now you can use drag and drop features to rearrange clips in the desired sequence.

Step 10: In order to add text to your clips you can use the “Add Text” option. One can also adjust style, font and color for the background.

Step 11: Hit the Upload to YouTube button to make your content visible online.

Method 2: Use Paid Software for Pro Recorders

For professional Recorders who want to access high-end features, Wondershare Filmora is the best choice. You need to follow these simple steps to record PC screen with this advanced tool:

Step 1: First of all you need to download Wondershare Fimora from its official website.

Step 2: Install this software on your system and launch it with full feature mode.

Step 3: Now hit the “Record PC Screen” option that is available under the “record” button.

Step 4: Users can make selections out of three different screen selection options: Custom, Target, and Full Window.

Step 5: If you want to record audio signal too then hit Microphone audio on or off settings as per need.

Step 6: Hit the REC option to begin the recording process.

Step 7: Hit F9 when the software finishes its countdown from 5 to 1.

Step 8: It is also possible to customized hotkeys for an immediate start and stop button access.

Step 9: This software tool saves the recorded videos in a media library where you can find it with ease for further needs.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Most of the gamers these days are searching for tools that can help them to capture the audio stream while recording their on-screen performance. However, there are unlimited software available over the internet to handle such needs but careful selection of the most trustworthy tool is essential to ensure quality results. The article below contains details about some of the best tools along with associated recording procedures, keep reading to avail complete information.

• Method 1: Free Software Available Online
• Method 2: Use Paid Software for Pro Recorders

Method 1: Free Software Available Online

Ezvid screen recording tool is capable enough to record every minute activity on your screen while extended support to audio content. It can help users to develop instructional videos for their gameplays. Follow these steps to get the best results:

Step 1: First of all you need to download version 0.8.1.0 of Ezvid Free Screen Recorder.

Step 2: Get it installed on your system.

Step 3: Now double click on the Ezvid icon available on your desktop and it will immediately prompt you with the interface of Ezvid.

Step 4: Hit the “Capture Screen” option and it will begin a countdown timer on your screen. After counting up to only 3 seconds it will automatically begin the recording task.

Step 5: As soon as your project gets finished, simply hit the “Stop” button recorded clip will be moved to the timeline for the editing process.

Step 6: Hit the record voice icon available on the timeline and start your audio instructions.

Step 7: In case if you want to record background music then Ezvid will assist you to make selection for your song.

Step 8: It is also possible to slow down or speed up videos as per need.

Step 9: Now you can use drag and drop features to rearrange clips in the desired sequence.

Step 10: In order to add text to your clips you can use the “Add Text” option. One can also adjust style, font and color for the background.

Step 11: Hit the Upload to YouTube button to make your content visible online.

Method 2: Use Paid Software for Pro Recorders

For professional Recorders who want to access high-end features, Wondershare Filmora is the best choice. You need to follow these simple steps to record PC screen with this advanced tool:

Step 1: First of all you need to download Wondershare Fimora from its official website.

Step 2: Install this software on your system and launch it with full feature mode.

Step 3: Now hit the “Record PC Screen” option that is available under the “record” button.

Step 4: Users can make selections out of three different screen selection options: Custom, Target, and Full Window.

Step 5: If you want to record audio signal too then hit Microphone audio on or off settings as per need.

Step 6: Hit the REC option to begin the recording process.

Step 7: Hit F9 when the software finishes its countdown from 5 to 1.

Step 8: It is also possible to customized hotkeys for an immediate start and stop button access.

Step 9: This software tool saves the recorded videos in a media library where you can find it with ease for further needs.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: